Blackfin arch: remove pata resources from generic board

these are highly board specific, so putting into generic doesnt make much sense
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -39,7 +39,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/pata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -799,43 +798,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -961,10 +923,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -987,10 +945,6 @@ static int __init stamp_init(void)
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -825,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -996,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -1022,10 +980,6 @@ static int __init stamp_init(void)
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 

arch/blackfin/mach-bf533/boards/H8606.c

@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 
 #include <asm/dma.h>

arch/blackfin/mach-bf533/boards/cm_bf533.c

@@ -36,7 +36,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	38
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 2,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x2030C000,
-		.end = 0x2030C01F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2030D018,
-		.end = 0x2030D01B,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init cm_bf533_init(void)
@@ -416,10 +374,6 @@ static int __init cm_bf533_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -37,7 +37,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -424,10 +382,6 @@ static int __init ezkit_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 

arch/blackfin/mach-bf533/boards/stamp.c

@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <asm/dma.h>
@@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -625,10 +583,6 @@ static int __init stamp_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 

arch/blackfin/mach-bf537/boards/generic_board.c

@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
@@ -619,43 +618,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 	&bfin_pcmcia_cf_device,
@@ -717,10 +679,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport0_uart_device,
 	&bfin_sport1_uart_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init stamp_init(void)
@@ -732,9 +690,6 @@ static int __init stamp_init(void)
 				ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -35,7 +35,6 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/ata_platform.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
@@ -350,43 +349,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -499,10 +461,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -538,10 +496,6 @@ static int __init ezkit_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }