ARM: OMAP: Sync clocks with linux-omap tree

Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a
patch from Imre Deak to make McSPI clocks use id.
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/clock.c

@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
+#include <asm/mach-types.h>
 
 #include <asm/arch/cpu.h>
 #include <asm/arch/usb.h>
@@ -586,77 +587,53 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
  *-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Resets some clocks that may be left on from bootloader,
- * but leaves serial clocks on. See also omap_late_clk_reset().
- */
-static inline void omap1_early_clk_reset(void)
-{
-	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
-}
 
-static int __init omap1_late_clk_reset(void)
+static void __init omap1_clk_disable_unused(struct clk *clk)
 {
-	/* Turn off all unused clocks */
-	struct clk *p;
 	__u32 regval32;
 
-	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
-	omap_writew(regval32, SOFT_REQ_REG);
-	omap_writew(0, SOFT_REQ_REG2);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
-			p->enable_reg == 0)
-			continue;
-
 	/* Clocks in the DSP domain need api_ck. Just assume bootloader
 	 * has not enabled any DSP clocks */
-		if ((u32)p->enable_reg == DSP_IDLECT2) {
+	if ((u32)clk->enable_reg == DSP_IDLECT2) {
 		printk(KERN_INFO "Skipping reset check for DSP domain "
-			       "clock \"%s\"\n", p->name);
-			continue;
+		       "clock \"%s\"\n", clk->name);
+		return;
 	}
 
 	/* Is the clock already disabled? */
-		if (p->flags & ENABLE_REG_32BIT) {
-			if (p->flags & VIRTUAL_IO_ADDRESS)
-				regval32 = __raw_readl(p->enable_reg);
+	if (clk->flags & ENABLE_REG_32BIT) {
+		if (clk->flags & VIRTUAL_IO_ADDRESS)
+			regval32 = __raw_readl(clk->enable_reg);
 			else
-				regval32 = omap_readl(p->enable_reg);
+				regval32 = omap_readl(clk->enable_reg);
 	} else {
-			if (p->flags & VIRTUAL_IO_ADDRESS)
-				regval32 = __raw_readw(p->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS)
+			regval32 = __raw_readw(clk->enable_reg);
 		else
-				regval32 = omap_readw(p->enable_reg);
+			regval32 = omap_readw(clk->enable_reg);
 	}
 
-		if ((regval32 & (1 << p->enable_bit)) == 0)
-			continue;
+	if ((regval32 & (1 << clk->enable_bit)) == 0)
+		return;
 
 	/* FIXME: This clock seems to be necessary but no-one
 	 * has asked for its activation. */
-		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
-		    || p == &ck_dpll1out.clk // FIX: SoSSI, SSR
-		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
+	if (clk == &tc2_ck		// FIX: pm.c (SRAM), CCP, Camera
+	    || clk == &ck_dpll1out.clk	// FIX: SoSSI, SSR
+	    || clk == &arm_gpio_ck	// FIX: GPIO code for 1510
 		) {
 		printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
-			       p->name);
-			continue;
+		       clk->name);
+		return;
 	}
 
-		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
-		p->disable(p);
+	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
+	clk->disable(clk);
 	printk(" done\n");
-	}
-
-	return 0;
 }
-late_initcall(omap1_late_clk_reset);
 
 #else
-#define omap1_early_clk_reset()	{}
+#define omap1_clk_disable_unused	NULL
 #endif
 
 static struct clk_functions omap1_clk_functions = {
@@ -664,6 +641,7 @@ static struct clk_functions omap1_clk_functions = {
 	.clk_disable		= omap1_clk_disable,
 	.clk_round_rate		= omap1_clk_round_rate,
 	.clk_set_rate		= omap1_clk_set_rate,
+	.clk_disable_unused	= omap1_clk_disable_unused,
 };
 
 int __init omap1_clk_init(void)
@@ -671,8 +649,13 @@ int __init omap1_clk_init(void)
 	struct clk ** clkp;
 	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
+	u32 reg;
+
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(reg, SOFT_REQ_REG);
+	omap_writew(0, SOFT_REQ_REG2);
 
-	omap1_early_clk_reset();
 	clk_init(&omap1_clk_functions);
 
 	/* By default all idlect1 clocks are allowed to idle */
@@ -772,6 +755,12 @@ int __init omap1_clk_init(void)
 	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
 #endif
 
+	/* Amstrad Delta wants BCLK high when inactive */
+	if (machine_is_ams_delta())
+		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
+				(1 << SDW_MCLK_INV_BIT),
+				ULPD_CLOCK_CTRL);
+
 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
 	/* (on 730, bit 13 must not be cleared) */
 	if (cpu_is_omap730())

arch/arm/mach-omap1/clock.h

@@ -89,6 +89,7 @@ struct arm_idlect1_clk {
 #define EN_DSPTIMCK	5
 
 /* Various register defines for clock controls scattered around OMAP chip */
+#define SDW_MCLK_INV_BIT	2	/* In ULPD_CLKC_CTRL */
 #define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
 #define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
 #define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
@@ -741,6 +742,18 @@ static struct clk i2c_fck = {
 	.disable	= &omap1_clk_disable_generic,
 };
 
+static struct clk i2c_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.flags		= CLOCK_IN_OMAP16XX |
+			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
+			  ALWAYS_ENABLED,
+	.parent		= &armper_ck.clk,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_generic,
+	.disable	= &omap1_clk_disable_generic,
+};
+
 static struct clk * onchip_clks[] = {
 	/* non-ULPD clocks */
 	&ck_ref,
@@ -790,6 +803,7 @@ static struct clk * onchip_clks[] = {
 	/* Virtual clocks */
 	&virtual_ck_mpu,
 	&i2c_fck,
+	&i2c_ick,
 };
 
 #endif

arch/arm/mach-omap2/clock.c

@@ -1025,12 +1025,29 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
  * Omap2 clock reset and init functions
  *-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+static void __init omap2_clk_disable_unused(struct clk *clk)
+{
+	u32 regval32;
+
+	regval32 = __raw_readl(clk->enable_reg);
+	if ((regval32 & (1 << clk->enable_bit)) == 0)
+		return;
+
+	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+	_omap2_clk_disable(clk);
+}
+#else
+#define omap2_clk_disable_unused	NULL
+#endif
+
 static struct clk_functions omap2_clk_functions = {
 	.clk_enable		= omap2_clk_enable,
 	.clk_disable		= omap2_clk_disable,
 	.clk_round_rate		= omap2_clk_round_rate,
 	.clk_set_rate		= omap2_clk_set_rate,
 	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
 };
 
 static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
@@ -1070,28 +1087,6 @@ void omap2_clk_prepare_for_reboot(void)
 	clk_set_rate(vclk, rate);
 }
 
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-static void __init omap2_disable_unused_clocks(void)
-{
-	struct clk *ck;
-	u32 regval32;
-
-	list_for_each_entry(ck, &clocks, node) {
-		if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
-			ck->enable_reg == 0)
-			continue;
-
-		regval32 = __raw_readl(ck->enable_reg);
-		if ((regval32 & (1 << ck->enable_bit)) == 0)
-			continue;
-
-		printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name);
-		_omap2_clk_disable(ck);
-	}
-}
-late_initcall(omap2_disable_unused_clocks);
-#endif
-
 /*
  * Switch the MPU rate if specified on cmdline.
  * We cannot do this early until cmdline is parsed.

arch/arm/mach-omap2/clock.h

@@ -1368,7 +1368,8 @@ static struct clk mcbsp5_fck = {
 };
 
 static struct clk mcspi1_ick = {
-	.name		= "mcspi1_ick",
+	.name		= "mcspi_ick",
+	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
@@ -1377,7 +1378,8 @@ static struct clk mcspi1_ick = {
 };
 
 static struct clk mcspi1_fck = {
-	.name		= "mcspi1_fck",
+	.name		= "mcspi_fck",
+	.id		= 1,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
@@ -1386,7 +1388,8 @@ static struct clk mcspi1_fck = {
 };
 
 static struct clk mcspi2_ick = {
-	.name		= "mcspi2_ick",
+	.name		= "mcspi_ick",
+	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
@@ -1395,7 +1398,8 @@ static struct clk mcspi2_ick = {
 };
 
 static struct clk mcspi2_fck = {
-	.name		= "mcspi2_fck",
+	.name		= "mcspi_fck",
+	.id		= 2,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
@@ -1404,7 +1408,8 @@ static struct clk mcspi2_fck = {
 };
 
 static struct clk mcspi3_ick = {
-	.name		= "mcspi3_ick",
+	.name		= "mcspi_ick",
+	.id		= 3,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
@@ -1413,7 +1418,8 @@ static struct clk mcspi3_ick = {
 };
 
 static struct clk mcspi3_fck = {
-	.name		= "mcspi3_fck",
+	.name		= "mcspi_fck",
+	.id		= 3,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,

arch/arm/plat-omap/clock.c

@@ -323,6 +323,31 @@ EXPORT_SYMBOL(clk_allow_idle);
 
 /*-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+	struct clk *ck;
+	unsigned long flags;
+
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
+			ck->enable_reg == 0)
+			continue;
+
+		spin_lock_irqsave(&clockfw_lock, flags);
+		if (arch_clock->clk_disable_unused)
+			arch_clock->clk_disable_unused(ck);
+		spin_unlock_irqrestore(&clockfw_lock, flags);
+	}
+
+	return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
+
 int __init clk_init(struct clk_functions * custom_clocks)
 {
 	if (!custom_clocks) {

include/asm-arm/arch-omap/clock.h

@@ -45,6 +45,7 @@ struct clk_functions {
 	struct clk *	(*clk_get_parent)(struct clk *clk);
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
+	void		(*clk_disable_unused)(struct clk *clk);
 };
 
 extern unsigned int mpurate;