Skip to content

L
linux
Commit 919fede6 authored by Jon Loeliger's avatar Jon Loeliger Committed by Paul Mackerras
Browse files
Options

[POWERPC] Rewrite the PPC 86xx IRQ handling to use Flat Device Tree 

IRQ setup now comes from the Flat Device Tree and use the new generic
IRQ code.  Fixed the fsl_soc.c IRQ OF interrupt node parsing.
Removed some unused MPC86xx macro definition.
Signed-off-by: default avatarZhang Wei <wei.zhang@freescale.com>
Signed-off-by: default avatarJon Loeliger <jdl@freescale.com>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent afd05423
Hide whitespace changes
Inline Side-by-side
Showing with 188 additions and 198 deletions
arch/powerpc/platforms/86xx/mpc8641_hpcn.h
View file @ 919fede6
...@@ -16,38 +16,6 @@ ...@@ -16,38 +16,6 @@
#include <linux/init.h> #include <linux/init.h>
/* PCI interrupt controller */
#define PIRQA 3
#define PIRQB 4
#define PIRQC 5
#define PIRQD 6
#define PIRQ7 7
#define PIRQE 9
#define PIRQF 10
#define PIRQG 11
#define PIRQH 12
/* PCI-Express memory map */
#define MPC86XX_PCIE_LOWER_IO 0x00000000
#define MPC86XX_PCIE_UPPER_IO 0x00ffffff
#define MPC86XX_PCIE_LOWER_MEM 0x80000000
#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff
#define MPC86XX_PCIE_IO_BASE 0xe2000000
#define MPC86XX_PCIE_MEM_OFFSET 0x00000000
#define MPC86XX_PCIE_IO_SIZE 0x01000000
#define PCIE1_CFG_ADDR_OFFSET (0x8000)
#define PCIE1_CFG_DATA_OFFSET (0x8004)
#define PCIE2_CFG_ADDR_OFFSET (0x9000)
#define PCIE2_CFG_DATA_OFFSET (0x9004)
#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET
#define MPC86xx_PCIE_SIZE (0x1000)
#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ #define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */
#endif /* __MPC8641_HPCN_H__ */ #endif /* __MPC8641_HPCN_H__ */
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
View file @ 919fede6
...@@ -37,6 +37,14 @@ ...@@ -37,6 +37,14 @@
#include "mpc86xx.h" #include "mpc86xx.h"
#include "mpc8641_hpcn.h" #include "mpc8641_hpcn.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0)
#else
#define DBG(fmt...) do { } while(0)
#endif
#ifndef CONFIG_PCI #ifndef CONFIG_PCI
unsigned long isa_io_base = 0; unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0; unsigned long isa_mem_base = 0;
...@@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0; ...@@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0;
#endif #endif
/* static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc,
* Internal interrupts are all Level Sensitive, and Positive Polarity struct pt_regs *regs)
*/ {
unsigned int cascade_irq = i8259_irq(regs);
static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { if (cascade_irq != NO_IRQ)
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ generic_handle_irq(cascade_irq, regs);
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ desc->chip->eoi(irq);
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ }
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */
0x0, /* External 0: */
0x0, /* External 1: */
0x0, /* External 2: */
0x0, /* External 3: */
0x0, /* External 4: */
0x0, /* External 5: */
0x0, /* External 6: */
0x0, /* External 7: */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */
0x0, /* External 11: */
0x0,
0x0,
0x0,
0x0,
};
void __init void __init
mpc86xx_hpcn_init_irq(void) mpc86xx_hpcn_init_irq(void)
{ {
struct mpic *mpic1; struct mpic *mpic1;
struct device_node *np, *cascade_node = NULL;
int cascade_irq;
phys_addr_t openpic_paddr; phys_addr_t openpic_paddr;
np = of_find_node_by_type(NULL, "open-pic");
if (np == NULL)
return;
/* Determine the Physical Address of the OpenPIC regs */ /* Determine the Physical Address of the OpenPIC regs */
openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
/* Alloc mpic structure and per isu has 16 INT entries. */ /* Alloc mpic structure and per isu has 16 INT entries. */
mpic1 = mpic_alloc(openpic_paddr, mpic1 = mpic_alloc(np, openpic_paddr,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, 16, NR_IRQS - 4,
mpc86xx_hpcn_openpic_initsenses,
sizeof(mpc86xx_hpcn_openpic_initsenses),
" MPIC "); " MPIC ");
BUG_ON(mpic1 == NULL); BUG_ON(mpic1 == NULL);
mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000);
/* 48 Internal Interrupts */ /* 48 Internal Interrupts */
mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200);
mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400);
mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600);
/* 16 External interrupts */ /* 16 External interrupts
mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); * Moving them from [0 - 15] to [64 - 79]
*/
mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000);
mpic_init(mpic1); mpic_init(mpic1);
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); /* Initialize i8259 controller */
i8259_init(0, I8259_OFFSET); for_each_node_by_type(np, "interrupt-controller")
#endif if (device_is_compatible(np, "chrp,iic")) {
} cascade_node = np;
break;
}
if (cascade_node == NULL) {
printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n");
return;
}
cascade_irq = irq_of_parse_and_map(cascade_node, 0);
if (cascade_irq == NO_IRQ) {
printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt");
return;
}
DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
i8259_init(cascade_node, 0);
set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
#endif
}
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
/*
* interrupt routing
*/
int enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) const unsigned char uli1575_irq_route_table[16] = {
0, /* 0: Reserved */
0x8, /* 1: 0b1000 */
0, /* 2: Reserved */
0x2, /* 3: 0b0010 */
0x4, /* 4: 0b0100 */
0x5, /* 5: 0b0101 */
0x7, /* 6: 0b0111 */
0x6, /* 7: 0b0110 */
0, /* 8: Reserved */
0x1, /* 9: 0b0001 */
0x3, /* 10: 0b0011 */
0x9, /* 11: 0b1001 */
0xb, /* 12: 0b1011 */
0, /* 13: Reserved */
0xd, /* 14, 0b1101 */
0xf, /* 15, 0b1111 */
};
static int __devinit
get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
{ {
static char pci_irq_table[][4] = { struct of_irq oirq;
/* u32 laddr[3];
* PCI IDSEL/INTPIN->INTLINE struct device_node *hosenode = hose ? hose->arch_data : NULL;
* A B C D
*/ if (!hosenode) return -EINVAL;
{PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */
{PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
{0, 0, 0, 0}, /* IDSEL 19 */ laddr[1] = laddr[2] = 0;
{0, 0, 0, 0}, /* IDSEL 20 */ of_irq_map_raw(hosenode, &pin, laddr, &oirq);
{0, 0, 0, 0}, /* IDSEL 21 */ DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
{0, 0, 0, 0}, /* IDSEL 22 */ laddr[0], slot, pin, oirq.specifier[0]);
{0, 0, 0, 0}, /* IDSEL 23 */ return oirq.specifier[0];
{0, 0, 0, 0}, /* IDSEL 24 */
{0, 0, 0, 0}, /* IDSEL 25 */
{PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/
{PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */
{PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */
{PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */
{PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/
{PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */
};
const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
} }
static void __devinit quirk_ali1575(struct pci_dev *dev) static void __devinit quirk_uli1575(struct pci_dev *dev)
{ {
unsigned short temp; unsigned short temp;
struct pci_controller *hose = pci_bus_to_host(dev->bus);
unsigned char irq2pin[16];
unsigned long pirq_map_word = 0;
u32 irq;
int i;
/* /*
* ALI1575 interrupts route table setup: * ULI1575 interrupts route setup
*/
memset(irq2pin, 0, 16); /* Initialize default value 0 */
/*
* PIRQA -> PIRQD mapping read from OF-tree
*
* interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
* PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
*/
for (i = 0; i < 4; i++){
irq = get_pci_irq_from_of(hose, 17, i + 1);
if (irq > 0 && irq < 16)
irq2pin[irq] = PIRQA + i;
else
printk(KERN_WARNING "ULI1575 device"
"(slot %d, pin %d) irq %d is invalid.\n",
17, i, irq);
}
/*
* PIRQE -> PIRQF mapping set manually
* *
* IRQ pin IRQ# * IRQ pin IRQ#
* PIRQA ---- 3
* PIRQB ---- 4
* PIRQC ---- 5
* PIRQD ---- 6
* PIRQE ---- 9 * PIRQE ---- 9
* PIRQF ---- 10 * PIRQF ---- 10
* PIRQG ---- 11 * PIRQG ---- 11
* PIRQH ---- 12 * PIRQH ---- 12
*
* interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
* PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
*/ */
pci_write_config_dword(dev, 0x48, 0xb9317542); for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i;
/* Set IRQ-PIRQ Mapping to ULI1575 */
for (i = 0; i < 16; i++)
if (irq2pin[i])
pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
<< ((irq2pin[i] - PIRQA) * 4);
/* USB 1.1 OHCI controller 1, interrupt: PIRQE */ /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
pci_write_config_byte(dev, 0x86, 0x0c); DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
pirq_map_word);
pci_write_config_dword(dev, 0x48, pirq_map_word);
/* USB 1.1 OHCI controller 2, interrupt: PIRQF */ #define ULI1575_SET_DEV_IRQ(slot, pin, reg) \
pci_write_config_byte(dev, 0x87, 0x0d); do { \
int irq; \
irq = get_pci_irq_from_of(hose, slot, pin); \
if (irq > 0 && irq < 16) \
pci_write_config_byte(dev, reg, irq2pin[irq]); \
else \
printk(KERN_WARNING "ULI1575 device" \
"(slot %d, pin %d) irq %d is invalid.\n", \
slot, pin, irq); \
} while(0)
/* USB 1.1 OHCI controller 3, interrupt: PIRQH */ /* USB 1.1 OHCI controller 1, slot 28, pin 1 */
pci_write_config_byte(dev, 0x88, 0x0f); ULI1575_SET_DEV_IRQ(28, 1, 0x86);
/* USB 2.0 controller, interrupt: PIRQ7 */ /* USB 1.1 OHCI controller 2, slot 28, pin 2 */
pci_write_config_byte(dev, 0x74, 0x06); ULI1575_SET_DEV_IRQ(28, 2, 0x87);
/* Audio controller, interrupt: PIRQE */ /* USB 1.1 OHCI controller 3, slot 28, pin 3 */
pci_write_config_byte(dev, 0x8a, 0x0c); ULI1575_SET_DEV_IRQ(28, 3, 0x88);
/* Modem controller, interrupt: PIRQF */ /* USB 2.0 controller, slot 28, pin 4 */
pci_write_config_byte(dev, 0x8b, 0x0d); irq = get_pci_irq_from_of(hose, 28, 4);
if (irq >= 0 && irq <=15)
pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
/* HD audio controller, interrupt: PIRQG */ /* Audio controller, slot 29, pin 1 */
pci_write_config_byte(dev, 0x8c, 0x0e); ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
/* Serial ATA interrupt: PIRQD */ /* Modem controller, slot 29, pin 2 */
pci_write_config_byte(dev, 0x8d, 0x0b); ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
/* SMB interrupt: PIRQH */ /* HD audio controller, slot 29, pin 3 */
pci_write_config_byte(dev, 0x8e, 0x0f); ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
/* PMU ACPI SCI interrupt: PIRQH */ /* SMB interrupt: slot 30, pin 1 */
pci_write_config_byte(dev, 0x8f, 0x0f); ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
/* PMU ACPI SCI interrupt: slot 30, pin 2 */
ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
/* Serial ATA interrupt: slot 31, pin 1 */
ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
/* Primary PATA IDE IRQ: 14 /* Primary PATA IDE IRQ: 14
* Secondary PATA IDE IRQ: 15 * Secondary PATA IDE IRQ: 15
*/ */
pci_write_config_byte(dev, 0x44, 0x3d); pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
pci_write_config_byte(dev, 0x75, 0x0f); pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
/* Set IRQ14 and IRQ15 to legacy IRQs */ /* Set IRQ14 and IRQ15 to legacy IRQs */
pci_read_config_word(dev, 0x46, &temp); pci_read_config_word(dev, 0x46, &temp);
...@@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev) ...@@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev)
*/ */
outb(0xfa, 0x4d0); outb(0xfa, 0x4d0);
outb(0x1e, 0x4d1); outb(0x1e, 0x4d1);
#undef ULI1575_SET_DEV_IRQ
} }
static void __devinit quirk_uli5288(struct pci_dev *dev) static void __devinit quirk_uli5288(struct pci_dev *dev)
...@@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev) ...@@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev)
dev->class |= 0x1; dev->class |= 0x1;
} }
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
...@@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void) ...@@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void)
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np); add_bridge(np);
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = mpc86xx_map_irq;
ppc_md.pci_exclude_device = mpc86xx_exclude_device; ppc_md.pci_exclude_device = mpc86xx_exclude_device;
#endif #endif
...@@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) ...@@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
} }
void __init mpc86xx_hpcn_pcibios_fixup(void)
{
struct pci_dev *dev = NULL;
for_each_pci_dev(dev)
pci_read_irq_line(dev);
}
/* /*
* Called very early, device-tree isn't unflattened * Called very early, device-tree isn't unflattened
*/ */
...@@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) { ...@@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) {
.setup_arch = mpc86xx_hpcn_setup_arch, .setup_arch = mpc86xx_hpcn_setup_arch,
.init_IRQ = mpc86xx_hpcn_init_irq, .init_IRQ = mpc86xx_hpcn_init_irq,
.show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo,
.pcibios_fixup = mpc86xx_hpcn_pcibios_fixup,
.get_irq = mpic_get_irq, .get_irq = mpic_get_irq,
.restart = mpc86xx_restart, .restart = mpc86xx_restart,
.time_init = mpc86xx_time_init, .time_init = mpc86xx_time_init,
......
arch/powerpc/sysdev/fsl_soc.c
View file @ 919fede6
...@@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void) ...@@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void)
mdio_data.irq[k] = -1; mdio_data.irq[k] = -1;
while ((child = of_get_next_child(np, child)) != NULL) { while ((child = of_get_next_child(np, child)) != NULL) {
if (child->n_intrs) { const u32 *id = get_property(child, "reg", NULL);
const u32 *id = mdio_data.irq[*id] = irq_of_parse_and_map(child, 0);
get_property(child, "reg", NULL);
mdio_data.irq[*id] = child->intrs[0].line;
}
} }
ret = ret =
...@@ -131,6 +128,7 @@ static int __init gfar_of_init(void) ...@@ -131,6 +128,7 @@ static int __init gfar_of_init(void)
const char *model; const char *model;
const void *mac_addr; const void *mac_addr;
const phandle *ph; const phandle *ph;
int n_res = 1;
memset(r, 0, sizeof(r)); memset(r, 0, sizeof(r));
memset(&gfar_data, 0, sizeof(gfar_data)); memset(&gfar_data, 0, sizeof(gfar_data));
...@@ -139,8 +137,7 @@ static int __init gfar_of_init(void) ...@@ -139,8 +137,7 @@ static int __init gfar_of_init(void)
if (ret) if (ret)
goto err; goto err;
r[1].start = np->intrs[0].line; r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
r[1].end = np->intrs[0].line;
r[1].flags = IORESOURCE_IRQ; r[1].flags = IORESOURCE_IRQ;
model = get_property(np, "model", NULL); model = get_property(np, "model", NULL);
...@@ -150,19 +147,19 @@ static int __init gfar_of_init(void) ...@@ -150,19 +147,19 @@ static int __init gfar_of_init(void)
r[1].name = gfar_tx_intr; r[1].name = gfar_tx_intr;
r[2].name = gfar_rx_intr; r[2].name = gfar_rx_intr;
r[2].start = np->intrs[1].line; r[2].start = r[2].end = irq_of_parse_and_map(np, 1);
r[2].end = np->intrs[1].line;
r[2].flags = IORESOURCE_IRQ; r[2].flags = IORESOURCE_IRQ;
r[3].name = gfar_err_intr; r[3].name = gfar_err_intr;
r[3].start = np->intrs[2].line; r[3].start = r[3].end = irq_of_parse_and_map(np, 2);
r[3].end = np->intrs[2].line;
r[3].flags = IORESOURCE_IRQ; r[3].flags = IORESOURCE_IRQ;
n_res += 2;
} }
gfar_dev = gfar_dev =
platform_device_register_simple("fsl-gianfar", i, &r[0], platform_device_register_simple("fsl-gianfar", i, &r[0],
np->n_intrs + 1); n_res + 1);
if (IS_ERR(gfar_dev)) { if (IS_ERR(gfar_dev)) {
ret = PTR_ERR(gfar_dev); ret = PTR_ERR(gfar_dev);
...@@ -251,8 +248,7 @@ static int __init fsl_i2c_of_init(void) ...@@ -251,8 +248,7 @@ static int __init fsl_i2c_of_init(void)
if (ret) if (ret)
goto err; goto err;
r[1].start = np->intrs[0].line; r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
r[1].end = np->intrs[0].line;
r[1].flags = IORESOURCE_IRQ; r[1].flags = IORESOURCE_IRQ;
i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
...@@ -388,8 +384,7 @@ static int __init fsl_usb_of_init(void) ...@@ -388,8 +384,7 @@ static int __init fsl_usb_of_init(void)
if (ret) if (ret)
goto err; goto err;
r[1].start = np->intrs[0].line; r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
r[1].end = np->intrs[0].line;
r[1].flags = IORESOURCE_IRQ; r[1].flags = IORESOURCE_IRQ;
usb_dev_mph = usb_dev_mph =
...@@ -437,8 +432,7 @@ static int __init fsl_usb_of_init(void) ...@@ -437,8 +432,7 @@ static int __init fsl_usb_of_init(void)
if (ret) if (ret)
goto unreg_mph; goto unreg_mph;
r[1].start = np->intrs[0].line; r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
r[1].end = np->intrs[0].line;
r[1].flags = IORESOURCE_IRQ; r[1].flags = IORESOURCE_IRQ;
usb_dev_dr = usb_dev_dr =
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7