Commit 91ad757c authored by Ben Hutchings's avatar Ben Hutchings Committed by Jeff Garzik

sfc: Removed casts to void

Signed-off-by: default avatarBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 4cc58bde
......@@ -265,7 +265,7 @@ void efx_process_channel_now(struct efx_channel *channel)
napi_disable(&channel->napi_str);
/* Poll the channel */
(void) efx_process_channel(channel, efx->type->evq_size);
efx_process_channel(channel, efx->type->evq_size);
/* Ack the eventq. This may cause an interrupt to be generated
* when they are reenabled */
......@@ -1688,7 +1688,7 @@ static int efx_reset(struct efx_nic *efx)
if (method == RESET_TYPE_DISABLE) {
/* Reinitialise the device anyway so the driver unload sequence
* can talk to the external SRAM */
(void) falcon_init_nic(efx);
falcon_init_nic(efx);
rc = -EIO;
goto fail4;
}
......
......@@ -2647,7 +2647,7 @@ void falcon_remove_nic(struct efx_nic *efx)
falcon_free_buffer(efx, &efx->irq_status);
(void) falcon_reset_hw(efx, RESET_TYPE_ALL);
falcon_reset_hw(efx, RESET_TYPE_ALL);
/* Release the second function after the reset */
if (nic_data->pci_dev2) {
......
......@@ -454,7 +454,7 @@ static int falcon_check_xaui_link_up(struct efx_nic *efx)
EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n",
__func__, tries);
(void) falcon_reset_xaui(efx);
falcon_reset_xaui(efx);
udelay(200);
tries--;
}
......@@ -572,7 +572,7 @@ int falcon_check_xmac(struct efx_nic *efx)
xaui_link_ok = falcon_xaui_link_ok(efx);
if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok)
(void) falcon_reset_xaui(efx);
falcon_reset_xaui(efx);
/* Call the PHY check_hw routine */
rc = efx->phy_op->check_hw(efx);
......
......@@ -116,18 +116,18 @@ void sfe4001_poweroff(struct efx_nic *efx)
/* Turn off all power rails */
out = 0xff;
(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
/* Disable port 1 outputs on IO expander */
cfg = 0xff;
(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
/* Disable port 0 outputs on IO expander */
cfg = 0xff;
(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
/* Clear any over-temperature alert */
(void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
}
/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
......@@ -253,14 +253,14 @@ int sfe4001_poweron(struct efx_nic *efx)
fail3:
/* Turn off all power rails */
out = 0xff;
(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
/* Disable port 1 outputs on IO expander */
out = 0xff;
(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
fail2:
/* Disable port 0 outputs on IO expander */
out = 0xff;
(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
fail1:
return rc;
}
......@@ -376,7 +376,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
* perform a special software reset */
if ((phy_data->tx_disabled && !efx->tx_disabled) ||
loop_change) {
(void) tenxpress_special_reset(efx);
tenxpress_special_reset(efx);
falcon_reset_xaui(efx);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment