Commit 92429069 authored by Philipp Zabel's avatar Philipp Zabel Committed by Mark Brown

ASoC: pxa-ssp: Use 16-bit DMA for magician stereo

Now magician and similar boards can use network mode with only one
active slot to explicitly set 16 bit frame width, even for S16_LE
stereo sound.
Signed-off-by: default avatarPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 1f218695
......@@ -627,12 +627,18 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
u32 sscr0;
u32 sspsp;
int width = snd_pcm_format_physical_width(params_format(params));
int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
/* select correct DMA params */
if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
dma = 1; /* capture DMA offset is 1,3 */
if (chn == 2)
dma += 2; /* stereo DMA offset is 2, mono is 0 */
/* Network mode with one active slot (ttsa == 1) can be used
* to force 16-bit frame width on the wire (for S16_LE), even
* with two channels. Use 16-bit DMA transfers for this case.
*/
if (((chn == 2) && (ttsa != 1)) || (width == 32))
dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */
cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
......@@ -712,7 +718,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
/* When we use a network mode, we always require TDM slots
* - complain loudly and fail if they've not been set up yet.
*/
if ((sscr0 & SSCR0_MOD) && !(ssp_read_reg(ssp, SSTSA) & 0xf)) {
if ((sscr0 & SSCR0_MOD) && !ttsa) {
dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
return -EINVAL;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment