Commit 92a8046c authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Linus Walleij

gpio: winbond: fix ISA_BUS_API dependency

The newly added GPIO driver for winbond chipsets causes a
circular dependency warning in Kconfig:

drivers/gpio/Kconfig:13:error: recursive dependency detected!
drivers/gpio/Kconfig:13:	symbol GPIOLIB is selected by STX104
drivers/iio/adc/Kconfig:699:	symbol STX104 depends on ISA_BUS_API
arch/Kconfig:830:	symbol ISA_BUS_API is selected by GPIO_WINBOND
drivers/gpio/Kconfig:701:	symbol GPIO_WINBOND depends on GPIOLIB

The underlying problem is that ISA_BUS_API is not meant to be selected by
device drivers, instead it is provided by the architectures that support
ISA add-on card devices, or in case of x86 have this explicitly enabled.

This particular driver appears to be different from the other ISA_BUS_API
based drivers, in that it is not normally an add-on card (ISA or PC104)
but instead is an LPC-attached component on the mainboard. We already
support other functionality provided by this chip, at least
drivers/watchdog/w83627hf_wdt.c and drivers/hwmon/w83627ehf.c, plus
there is a discovery function for this hardware in
drivers/parport/parport_pc.c.

If we want to use this driver without having to enable CONFIG_EXPERT,
it might be better to not use the isa_bus_type for it, but rather
turn it into a platform_driver, acpi_driver or add an MFD for it that
is shared with the wdt and hwmon portions and does the probing.

For now, this patch fixes the dependency by changing 'select' into
'depends on'.

Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: a0d65009 ("gpio: winbond: Add driver")
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 58556204
...@@ -700,7 +700,7 @@ config GPIO_TS5500 ...@@ -700,7 +700,7 @@ config GPIO_TS5500
config GPIO_WINBOND config GPIO_WINBOND
tristate "Winbond Super I/O GPIO support" tristate "Winbond Super I/O GPIO support"
select ISA_BUS_API depends on ISA_BUS_API
help help
This option enables support for GPIOs found on Winbond Super I/O This option enables support for GPIOs found on Winbond Super I/O
chips. chips.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment