Commit 92c6f76c authored by Rajkumar Manoharan's avatar Rajkumar Manoharan Committed by John W. Linville

ath9k: set beacon related ps flags on bss_info change

Requesting beacon sync up to configure beacon timers properly
in hw, has be done after doing beacon config with default values.
Setting the flags in beacon config is causing the device to not
enter into network sleep on idle state.
Signed-off-by: default avatarRajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 3782c69d
...@@ -781,12 +781,6 @@ void ath_set_beacon(struct ath_softc *sc) ...@@ -781,12 +781,6 @@ void ath_set_beacon(struct ath_softc *sc)
break; break;
case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_STATION:
ath_beacon_config_sta(sc, cur_conf); ath_beacon_config_sta(sc, cur_conf);
/*
* Request a re-configuration of Beacon related timers
* on the receipt of the first Beacon frame (i.e.,
* after time sync with the AP).
*/
sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
break; break;
default: default:
ath_dbg(common, ATH_DBG_CONFIG, ath_dbg(common, ATH_DBG_CONFIG,
......
...@@ -1969,6 +1969,12 @@ static void ath9k_bss_iter(void *data, u8 *mac, struct ieee80211_vif *vif) ...@@ -1969,6 +1969,12 @@ static void ath9k_bss_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
"Bss Info ASSOC %d, bssid: %pM\n", "Bss Info ASSOC %d, bssid: %pM\n",
bss_conf->aid, common->curbssid); bss_conf->aid, common->curbssid);
ath_beacon_config(sc, vif); ath_beacon_config(sc, vif);
/*
* Request a re-configuration of Beacon related timers
* on the receipt of the first Beacon frame (i.e.,
* after time sync with the AP).
*/
sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
/* Reset rssi stats */ /* Reset rssi stats */
sc->last_rssi = ATH_RSSI_DUMMY_MARKER; sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER; sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment