iio: adc: ti-adc161s626: add regulator support

Allow IIO_CHAN_INFO_SCALE and IIO_CHAN_INFO_OFFSET attributes for
processing by checking voltage from a regulator.
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt

@@ -3,6 +3,7 @@
 Required properties:
  - compatible: Should be "ti,adc141s626" or "ti,adc161s626"
  - reg: spi chip select number for the device
+ - vdda-supply: supply voltage to VDDA pin
 
 Recommended properties:
  - spi-max-frequency: Definition as per
@@ -11,6 +12,7 @@ Recommended properties:
 Example:
 adc@0 {
 	compatible = "ti,adc161s626";
+	vdda-supply = <&vdda_fixed>;
 	reg = <0>;
 	spi-max-frequency = <4300000>;
 };

drivers/iio/adc/ti-adc161s626.c

@@ -27,6 +27,7 @@
 #include <linux/iio/buffer.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
+#include <linux/regulator/consumer.h>
 
 #define TI_ADC_DRV_NAME	"ti-adc161s626"
 
@@ -39,7 +40,9 @@ static const struct iio_chan_spec ti_adc141s626_channels[] = {
 	{
 		.type = IIO_VOLTAGE,
 		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
 		.scan_index = 0,
 		.scan_type = {
 			.sign = 's',
@@ -54,7 +57,9 @@ static const struct iio_chan_spec ti_adc161s626_channels[] = {
 	{
 		.type = IIO_VOLTAGE,
 		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
 		.scan_index = 0,
 		.scan_type = {
 			.sign = 's',
@@ -68,6 +73,8 @@ static const struct iio_chan_spec ti_adc161s626_channels[] = {
 struct ti_adc_data {
 	struct iio_dev *indio_dev;
 	struct spi_device *spi;
+	struct regulator *ref;
+
 	u8 read_size;
 	u8 shift;
 
@@ -135,9 +142,8 @@ static int ti_adc_read_raw(struct iio_dev *indio_dev,
 	struct ti_adc_data *data = iio_priv(indio_dev);
 	int ret;
 
-	if (mask != IIO_CHAN_INFO_RAW)
-		return -EINVAL;
-
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
 		ret = iio_device_claim_direct_mode(indio_dev);
 		if (ret)
 			return ret;
@@ -145,8 +151,23 @@ static int ti_adc_read_raw(struct iio_dev *indio_dev,
 		ret = ti_adc_read_measurement(data, chan, val);
 		iio_device_release_direct_mode(indio_dev);
 
-	if (!ret)
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		ret = regulator_get_voltage(data->ref);
+		if (ret < 0)
+			return ret;
+
+		*val = ret / 1000;
+		*val2 = chan->scan_type.realbits;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = 1 << (chan->scan_type.realbits - 1);
 		return IIO_VAL_INT;
+	}
 
 	return 0;
 }
@@ -191,10 +212,17 @@ static int ti_adc_probe(struct spi_device *spi)
 		break;
 	}
 
+	data->ref = devm_regulator_get(&spi->dev, "vdda");
+	if (!IS_ERR(data->ref)) {
+		ret = regulator_enable(data->ref);
+		if (ret < 0)
+			return ret;
+	}
+
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
 					 ti_adc_trigger_handler, NULL);
 	if (ret)
-		return ret;
+		goto error_regulator_disable;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
@@ -205,15 +233,20 @@ static int ti_adc_probe(struct spi_device *spi)
 error_unreg_buffer:
 	iio_triggered_buffer_cleanup(indio_dev);
 
+error_regulator_disable:
+	regulator_disable(data->ref);
+
 	return ret;
 }
 
 static int ti_adc_remove(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ti_adc_data *data = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
 	iio_triggered_buffer_cleanup(indio_dev);
+	regulator_disable(data->ref);
 
 	return 0;
 }