Commit 93144b0e authored by David S. Miller's avatar David S. Miller

Merge branch 'mlxsw-Add-neighbour-offload-indication'

Ido Schimmel says:

====================
mlxsw: Add neighbour offload indication

Neighbour entries are programmed to the device's table so that the
correct destination MAC will be specified in a packet after it was
routed.

Despite being programmed to the device and unlike routes and FDB
entries, neighbour entries are currently not marked as offloaded. This
patchset changes that.

Patch #1 is a preparatory patch to make sure we only mark a neighbour as
offloaded in case it was successfully programmed to the device.

Patch #2 sets the offload indication on neighbours.

Patch #3 adds a test to verify above mentioned functionality.

Patched iproute2 version that prints the offload indication is available
here [1].

[1] https://github.com/idosch/iproute2/tree/idosch-next
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 95337b98 3321cff3
......@@ -2371,7 +2371,7 @@ static enum mlxsw_reg_rauht_op mlxsw_sp_rauht_op(bool adding)
MLXSW_REG_RAUHT_OP_WRITE_DELETE;
}
static void
static int
mlxsw_sp_router_neigh_entry_op4(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry,
enum mlxsw_reg_rauht_op op)
......@@ -2385,10 +2385,10 @@ mlxsw_sp_router_neigh_entry_op4(struct mlxsw_sp *mlxsw_sp,
if (neigh_entry->counter_valid)
mlxsw_reg_rauht_pack_counter(rauht_pl,
neigh_entry->counter_index);
mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rauht), rauht_pl);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rauht), rauht_pl);
}
static void
static int
mlxsw_sp_router_neigh_entry_op6(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry,
enum mlxsw_reg_rauht_op op)
......@@ -2402,7 +2402,7 @@ mlxsw_sp_router_neigh_entry_op6(struct mlxsw_sp *mlxsw_sp,
if (neigh_entry->counter_valid)
mlxsw_reg_rauht_pack_counter(rauht_pl,
neigh_entry->counter_index);
mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rauht), rauht_pl);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rauht), rauht_pl);
}
bool mlxsw_sp_neigh_ipv6_ignore(struct mlxsw_sp_neigh_entry *neigh_entry)
......@@ -2424,20 +2424,33 @@ mlxsw_sp_neigh_entry_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry,
bool adding)
{
enum mlxsw_reg_rauht_op op = mlxsw_sp_rauht_op(adding);
int err;
if (!adding && !neigh_entry->connected)
return;
neigh_entry->connected = adding;
if (neigh_entry->key.n->tbl->family == AF_INET) {
mlxsw_sp_router_neigh_entry_op4(mlxsw_sp, neigh_entry,
mlxsw_sp_rauht_op(adding));
err = mlxsw_sp_router_neigh_entry_op4(mlxsw_sp, neigh_entry,
op);
if (err)
return;
} else if (neigh_entry->key.n->tbl->family == AF_INET6) {
if (mlxsw_sp_neigh_ipv6_ignore(neigh_entry))
return;
mlxsw_sp_router_neigh_entry_op6(mlxsw_sp, neigh_entry,
mlxsw_sp_rauht_op(adding));
err = mlxsw_sp_router_neigh_entry_op6(mlxsw_sp, neigh_entry,
op);
if (err)
return;
} else {
WARN_ON_ONCE(1);
return;
}
if (adding)
neigh_entry->key.n->flags |= NTF_OFFLOADED;
else
neigh_entry->key.n->flags &= ~NTF_OFFLOADED;
}
void
......
......@@ -26,6 +26,7 @@ ALL_TESTS="
lag_dev_deletion_test
vlan_interface_uppers_test
bridge_extern_learn_test
neigh_offload_test
devlink_reload_test
"
NUM_NETIFS=2
......@@ -561,6 +562,31 @@ bridge_extern_learn_test()
ip link del dev br0
}
neigh_offload_test()
{
# Test that IPv4 and IPv6 neighbour entries are marked as offloaded
RET=0
ip -4 address add 192.0.2.1/24 dev $swp1
ip -6 address add 2001:db8:1::1/64 dev $swp1
ip -4 neigh add 192.0.2.2 lladdr de:ad:be:ef:13:37 nud perm dev $swp1
ip -6 neigh add 2001:db8:1::2 lladdr de:ad:be:ef:13:37 nud perm \
dev $swp1
ip -4 neigh show dev $swp1 | grep 192.0.2.2 | grep -q offload
check_err $? "ipv4 neigh entry not marked as offloaded when should"
ip -6 neigh show dev $swp1 | grep 2001:db8:1::2 | grep -q offload
check_err $? "ipv6 neigh entry not marked as offloaded when should"
log_test "neighbour offload indication"
ip -6 neigh del 2001:db8:1::2 dev $swp1
ip -4 neigh del 192.0.2.2 dev $swp1
ip -6 address del 2001:db8:1::1/64 dev $swp1
ip -4 address del 192.0.2.1/24 dev $swp1
}
devlink_reload_test()
{
# Test that after executing all the above configuration tests, a
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment