Commit 95046b92 authored by Sathya Perla's avatar Sathya Perla Committed by David S. Miller

be2net: refactor MAC-addr setup code

The code to configure the permanent MAC in be_setup() has become quite
complicated, with different FW cmds being used for BEx, SH-R and Lancer.
Simplify the logic by moving some of this complexity to be_cmds.c. This
makes the code in be_setup() a little more readable.
Signed-off-by: default avatarSathya Perla <sathya.perla@emulex.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b5bb9776
......@@ -2755,6 +2755,24 @@ int be_cmd_get_active_mac(struct be_adapter *adapter, u32 curr_pmac_id, u8 *mac)
}
}
int be_cmd_get_perm_mac(struct be_adapter *adapter, u8 *mac)
{
int status;
bool pmac_valid = false;
memset(mac, 0, ETH_ALEN);
if (lancer_chip(adapter))
status = be_cmd_get_mac_from_list(adapter, mac, &pmac_valid,
NULL, 0);
else if (be_physfn(adapter))
status = be_cmd_mac_addr_query(adapter, mac, true, 0, 0);
else
status = be_cmd_mac_addr_query(adapter, mac, false,
adapter->if_handle, 0);
return status;
}
/* Uses synchronous MCCQ */
int be_cmd_set_mac_list(struct be_adapter *adapter, u8 *mac_array,
u8 mac_count, u32 domain)
......
......@@ -1934,6 +1934,7 @@ extern int be_cmd_get_mac_from_list(struct be_adapter *adapter, u8 *mac,
u8 domain);
extern int be_cmd_get_active_mac(struct be_adapter *adapter, u32 pmac_id,
u8 *mac);
extern int be_cmd_get_perm_mac(struct be_adapter *adapter, u8 *mac);
extern int be_cmd_set_mac_list(struct be_adapter *adapter, u8 *mac_array,
u8 mac_count, u32 domain);
extern int be_cmd_set_hsw_config(struct be_adapter *adapter, u16 pvid,
......
......@@ -2759,7 +2759,7 @@ static int be_vfs_mac_query(struct be_adapter *adapter)
int status, vf;
u8 mac[ETH_ALEN];
struct be_vf_cfg *vf_cfg;
bool active;
bool active = false;
for_all_vfs(adapter, vf_cfg, vf) {
be_cmd_get_mac_from_list(adapter, mac, &active,
......@@ -2984,41 +2984,6 @@ static void be_setup_init(struct be_adapter *adapter)
adapter->cmd_privileges = MIN_PRIVILEGES;
}
static int be_get_mac_addr(struct be_adapter *adapter, u8 *mac, u32 if_handle,
bool *active_mac, u32 *pmac_id)
{
int status = 0;
if (!is_zero_ether_addr(adapter->netdev->perm_addr)) {
memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN);
if (!lancer_chip(adapter) && !be_physfn(adapter))
*active_mac = true;
else
*active_mac = false;
return status;
}
if (lancer_chip(adapter)) {
status = be_cmd_get_mac_from_list(adapter, mac,
active_mac, pmac_id, 0);
if (*active_mac) {
status = be_cmd_mac_addr_query(adapter, mac, false,
if_handle, *pmac_id);
}
} else if (be_physfn(adapter)) {
/* For BE3, for PF get permanent MAC */
status = be_cmd_mac_addr_query(adapter, mac, true, 0, 0);
*active_mac = false;
} else {
/* For BE3, for VF get soft MAC assigned by PF*/
status = be_cmd_mac_addr_query(adapter, mac, false,
if_handle, 0);
*active_mac = true;
}
return status;
}
static void be_get_resources(struct be_adapter *adapter)
{
u16 dev_num_vfs;
......@@ -3124,14 +3089,38 @@ static int be_get_config(struct be_adapter *adapter)
return status;
}
static int be_mac_setup(struct be_adapter *adapter)
{
u8 mac[ETH_ALEN];
int status;
if (is_zero_ether_addr(adapter->netdev->dev_addr)) {
status = be_cmd_get_perm_mac(adapter, mac);
if (status)
return status;
memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN);
memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN);
} else {
/* Maybe the HW was reset; dev_addr must be re-programmed */
memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN);
}
/* On BE3 VFs this cmd may fail due to lack of privilege.
* Ignore the failure as in this case pmac_id is fetched
* in the IFACE_CREATE cmd.
*/
be_cmd_pmac_add(adapter, mac, adapter->if_handle,
&adapter->pmac_id[0], 0);
return 0;
}
static int be_setup(struct be_adapter *adapter)
{
struct device *dev = &adapter->pdev->dev;
u32 en_flags;
u32 tx_fc, rx_fc;
int status;
u8 mac[ETH_ALEN];
bool active_mac;
be_setup_init(adapter);
......@@ -3171,35 +3160,17 @@ static int be_setup(struct be_adapter *adapter)
en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS;
if (adapter->function_caps & BE_FUNCTION_CAPS_RSS)
en_flags |= BE_IF_FLAGS_RSS;
en_flags = en_flags & adapter->if_cap_flags;
status = be_cmd_if_create(adapter, adapter->if_cap_flags, en_flags,
&adapter->if_handle, 0);
if (status != 0)
goto err;
memset(mac, 0, ETH_ALEN);
active_mac = false;
status = be_get_mac_addr(adapter, mac, adapter->if_handle,
&active_mac, &adapter->pmac_id[0]);
if (status != 0)
goto err;
if (!active_mac) {
status = be_cmd_pmac_add(adapter, mac, adapter->if_handle,
&adapter->pmac_id[0], 0);
if (status != 0)
status = be_mac_setup(adapter);
if (status)
goto err;
}
if (is_zero_ether_addr(adapter->netdev->dev_addr)) {
memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN);
memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN);
}
status = be_tx_qs_create(adapter);
if (status)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment