[PATCH] e1000: Fix whitespace

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/net/e1000/e1000_hw.c

@@ -3916,7 +3916,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
         }
     }
 
-    if(eeprom->use_eerd == TRUE) {
+    if (eeprom->use_eerd == TRUE) {
         ret_val = e1000_read_eeprom_eerd(hw, offset, words, data);
         if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) ||
             (hw->mac_type != e1000_82573))
@@ -4504,6 +4504,7 @@ e1000_read_mac_addr(struct e1000_hw * hw)
         hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF);
         hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8);
     }
+
     switch (hw->mac_type) {
     default:
         break;
@@ -6840,7 +6841,8 @@ int32_t
 e1000_check_phy_reset_block(struct e1000_hw *hw)
 {
     uint32_t manc = 0;
-    if(hw->mac_type > e1000_82547_rev_2)
+
+    if (hw->mac_type > e1000_82547_rev_2)
         manc = E1000_READ_REG(hw, MANC);
     return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
 	    E1000_BLK_PHY_RESET : E1000_SUCCESS;

drivers/net/e1000/e1000_hw.h

@@ -1764,7 +1764,6 @@ struct e1000_hw {
 #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
 #define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
                                               still to be processed. */
-
 /* Transmit Configuration Word */
 #define E1000_TXCW_FD         0x00000020        /* TXCW full duplex */
 #define E1000_TXCW_HD         0x00000040        /* TXCW half duplex */

drivers/net/e1000/e1000_osdep.h

@@ -47,7 +47,7 @@
 	                	BUG(); \
 			} else { \
 				msleep(x); \
-			} } while(0)
+			} } while (0)
 
 /* Some workarounds require millisecond delays and are run during interrupt
  * context.  Most notably, when establishing link, the phy may need tweaking

drivers/net/e1000/e1000_param.c

@@ -227,7 +227,7 @@ static int __devinit
 e1000_validate_option(int *value, struct e1000_option *opt,
 		struct e1000_adapter *adapter)
 {
-	if(*value == OPTION_UNSET) {
+	if (*value == OPTION_UNSET) {
 		*value = opt->def;
 		return 0;
 	}
@@ -244,7 +244,7 @@ e1000_validate_option(int *value, struct e1000_option *opt,
 		}
 		break;
 	case range_option:
-		if(*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
 			DPRINTK(PROBE, INFO,
 					"%s set to %i\n", opt->name, *value);
 			return 0;
@@ -254,10 +254,10 @@ e1000_validate_option(int *value, struct e1000_option *opt,
 		int i;
 		struct e1000_opt_list *ent;
 
-		for(i = 0; i < opt->arg.l.nr; i++) {
+		for (i = 0; i < opt->arg.l.nr; i++) {
 			ent = &opt->arg.l.p[i];
-			if(*value == ent->i) {
-				if(ent->str[0] != '\0')
+			if (*value == ent->i) {
+				if (ent->str[0] != '\0')
 					DPRINTK(PROBE, INFO, "%s\n", ent->str);
 				return 0;
 			}
@@ -291,7 +291,7 @@ void __devinit
 e1000_check_options(struct e1000_adapter *adapter)
 {
 	int bd = adapter->bd_number;
-	if(bd >= E1000_MAX_NIC) {
+	if (bd >= E1000_MAX_NIC) {
 		DPRINTK(PROBE, NOTICE,
 		       "Warning: no configuration for board #%i\n", bd);
 		DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
@@ -475,7 +475,7 @@ e1000_check_options(struct e1000_adapter *adapter)
 
 		if (num_InterruptThrottleRate > bd) {
 			adapter->itr = InterruptThrottleRate[bd];
-			switch(adapter->itr) {
+			switch (adapter->itr) {
 			case 0:
 				DPRINTK(PROBE, INFO, "%s turned off\n",
 					opt.name);
@@ -494,7 +494,7 @@ e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 
-	switch(adapter->hw.media_type) {
+	switch (adapter->hw.media_type) {
 	case e1000_media_type_fiber:
 	case e1000_media_type_internal_serdes:
 		e1000_check_fiber_options(adapter);
@@ -518,17 +518,17 @@ static void __devinit
 e1000_check_fiber_options(struct e1000_adapter *adapter)
 {
 	int bd = adapter->bd_number;
-	if(num_Speed > bd) {
+	if (num_Speed > bd) {
 		DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 
-	if(num_Duplex > bd) {
+	if (num_Duplex > bd) {
 		DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 
-	if((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+	if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
 		DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
 				 "not valid for fiber adapters, "
 				 "parameter ignored\n");
@@ -598,7 +598,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 		}
 	}
 
-	if((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+	if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
 		DPRINTK(PROBE, INFO,
 		       "AutoNeg specified along with Speed or Duplex, "
 		       "parameter ignored\n");
@@ -659,7 +659,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 	switch (speed + dplx) {
 	case 0:
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
-		if((num_Speed > bd) && (speed != 0 || dplx != 0))
+		if ((num_Speed > bd) && (speed != 0 || dplx != 0))
 			DPRINTK(PROBE, INFO,
 			       "Speed and duplex autonegotiation enabled\n");
 		break;