Commit 97edec3a authored by Oliver Hartkopp's avatar Oliver Hartkopp Committed by Marc Kleine-Budde

can: enable CAN FD for virtual CAN devices by default

CAN FD capable CAN interfaces can handle (classic) CAN 2.0 frames too.
New users usually fail at their first attempt to explore CAN FD on
virtual CAN interfaces due to the current CAN_MTU default.

Set the MTU to CANFD_MTU by default to reduce this confusion.
If someone *really* needs a 'classic CAN'-only device this can be set
with the 'ip' tool with e.g. 'ip link set vcan0 mtu 16' as before.
Signed-off-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 74b7b490
...@@ -152,7 +152,7 @@ static const struct net_device_ops vcan_netdev_ops = { ...@@ -152,7 +152,7 @@ static const struct net_device_ops vcan_netdev_ops = {
static void vcan_setup(struct net_device *dev) static void vcan_setup(struct net_device *dev)
{ {
dev->type = ARPHRD_CAN; dev->type = ARPHRD_CAN;
dev->mtu = CAN_MTU; dev->mtu = CANFD_MTU;
dev->hard_header_len = 0; dev->hard_header_len = 0;
dev->addr_len = 0; dev->addr_len = 0;
dev->tx_queue_len = 0; dev->tx_queue_len = 0;
......
...@@ -150,7 +150,7 @@ static const struct net_device_ops vxcan_netdev_ops = { ...@@ -150,7 +150,7 @@ static const struct net_device_ops vxcan_netdev_ops = {
static void vxcan_setup(struct net_device *dev) static void vxcan_setup(struct net_device *dev)
{ {
dev->type = ARPHRD_CAN; dev->type = ARPHRD_CAN;
dev->mtu = CAN_MTU; dev->mtu = CANFD_MTU;
dev->hard_header_len = 0; dev->hard_header_len = 0;
dev->addr_len = 0; dev->addr_len = 0;
dev->tx_queue_len = 0; dev->tx_queue_len = 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment