[PATCH] ppc64: update xmon debugger

From: Paul Mackerras <paulus@samba.org>

This patch fixes a whole pile of problems in the xmon kernel debugger for
ppc64.  This basically makes xmon SMP-safe.  Now, when we enter xmon it
sends an IPI to the other CPUs to get them into xmon too.  It also changes
the way we do single-stepping and breakpoints so that we don't have to
remove a breakpoint to proceed from it (instead we either emulate the
instruction where the breakpoint was, or execute it out of place).  With
this patch, if we get an exception inside xmon, it will just return to the
xmon command loop instead of hanging the system as at present.

The patch is quite large because it updates the disassembler to the latest
version from binutils (trimmed a bit), which is why I didn't cc lkml.

arch/ppc64/kernel/smp.c

@@ -618,7 +618,7 @@ void smp_message_recv(int msg, struct pt_regs *regs)
 #endif
 #ifdef CONFIG_DEBUGGER
 	case PPC_MSG_DEBUGGER_BREAK:
-		debugger(regs);
+		debugger_ipi(regs);
 		break;
 #endif
 	default:

arch/ppc64/kernel/traps.c

@@ -44,6 +44,7 @@ extern int fwnmi_active;
 
 #ifdef CONFIG_DEBUGGER
 int (*__debugger)(struct pt_regs *regs);
+int (*__debugger_ipi)(struct pt_regs *regs);
 int (*__debugger_bpt)(struct pt_regs *regs);
 int (*__debugger_sstep)(struct pt_regs *regs);
 int (*__debugger_iabr_match)(struct pt_regs *regs);
@@ -51,6 +52,7 @@ int (*__debugger_dabr_match)(struct pt_regs *regs);
 int (*__debugger_fault_handler)(struct pt_regs *regs);
 
 EXPORT_SYMBOL(__debugger);
+EXPORT_SYMBOL(__debugger_ipi);
 EXPORT_SYMBOL(__debugger_bpt);
 EXPORT_SYMBOL(__debugger_sstep);
 EXPORT_SYMBOL(__debugger_iabr_match);
@@ -69,9 +71,6 @@ int die(const char *str, struct pt_regs *regs, long err)
 	static int die_counter;
 	int nl = 0;
 
-	if (debugger_fault_handler(regs))
-		return 1;
-
 	if (debugger(regs))
 		return 1;
 
@@ -266,6 +265,8 @@ MachineCheckException(struct pt_regs *regs)
 	}
 #endif
 
+	if (debugger_fault_handler(regs))
+		return;
 	die("Machine check", regs, 0);
 
 	/* Must die if the interrupt is not recoverable */

arch/ppc64/xmon/ppc-dis.c

@@ -22,37 +22,28 @@ Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  *
 #include "ansidecl.h"
 #include "ppc.h"
 
-static int print_insn_powerpc PARAMS ((FILE *, unsigned long insn,
-				       unsigned long memaddr, int dialect));
-
-extern void print_address PARAMS((unsigned long memaddr));
-
-/* Print a big endian PowerPC instruction.  For convenience, also
-   disassemble instructions supported by the Motorola PowerPC 601.  */
-
-int
-print_insn_big_powerpc (FILE *out, unsigned long insn, unsigned long memaddr)
-{
-  return print_insn_powerpc (out, insn, memaddr,
-			     PPC_OPCODE_PPC | PPC_OPCODE_601);
-}
+extern void print_address (unsigned long memaddr);
 
 /* Print a PowerPC or POWER instruction.  */
 
-static int
-print_insn_powerpc (FILE *out, unsigned long insn, unsigned long memaddr,
-		    int dialect)
+int
+print_insn_powerpc (unsigned long insn, unsigned long memaddr, int dialect)
 {
   const struct powerpc_opcode *opcode;
   const struct powerpc_opcode *opcode_end;
   unsigned long op;
 
+  if (dialect == 0)
+    dialect = PPC_OPCODE_PPC | PPC_OPCODE_CLASSIC | PPC_OPCODE_COMMON
+	      | PPC_OPCODE_64 | PPC_OPCODE_POWER4 | PPC_OPCODE_ALTIVEC;
+
   /* Get the major opcode of the instruction.  */
   op = PPC_OP (insn);
 
   /* Find the first match in the opcode table.  We could speed this up
      a bit by doing a binary search on the major opcode.  */
   opcode_end = powerpc_opcodes + powerpc_num_opcodes;
+ again:
   for (opcode = powerpc_opcodes; opcode < opcode_end; opcode++)
     {
       unsigned long table_op;
@@ -80,15 +71,15 @@ print_insn_powerpc (FILE *out, unsigned long insn, unsigned long memaddr,
 	{
 	  operand = powerpc_operands + *opindex;
 	  if (operand->extract)
-		    (*operand->extract) (insn, &invalid);
+	    (*operand->extract) (insn, dialect, &invalid);
 	}
       if (invalid)
 	continue;
 
       /* The instruction is valid.  */
-      fprintf(out, "%s", opcode->name);
+      printf("%s", opcode->name);
       if (opcode->operands[0] != 0)
-		fprintf(out, "\t");
+	printf("\t");
 
       /* Now extract and print the operands.  */
       need_comma = 0;
@@ -107,7 +98,7 @@ print_insn_powerpc (FILE *out, unsigned long insn, unsigned long memaddr,
 
 	  /* Extract the value from the instruction.  */
 	  if (operand->extract)
-		    value = (*operand->extract) (insn, (int *) 0);
+	    value = (*operand->extract) (insn, dialect, &invalid);
 	  else
 	    {
 	      value = (insn >> operand->shift) & ((1 << operand->bits) - 1);
@@ -125,26 +116,28 @@ print_insn_powerpc (FILE *out, unsigned long insn, unsigned long memaddr,
 
 	  if (need_comma)
 	    {
-		      fprintf(out, ",");
+	      printf(",");
 	      need_comma = 0;
 	    }
 
 	  /* Print the operand as directed by the flags.  */
 	  if ((operand->flags & PPC_OPERAND_GPR) != 0)
-		    fprintf(out, "r%ld", value);
+	    printf("r%ld", value);
 	  else if ((operand->flags & PPC_OPERAND_FPR) != 0)
-		    fprintf(out, "f%ld", value);
+	    printf("f%ld", value);
+	  else if ((operand->flags & PPC_OPERAND_VR) != 0)
+	    printf("v%ld", value);
 	  else if ((operand->flags & PPC_OPERAND_RELATIVE) != 0)
 	    print_address (memaddr + value);
 	  else if ((operand->flags & PPC_OPERAND_ABSOLUTE) != 0)
 	    print_address (value & 0xffffffff);
 	  else if ((operand->flags & PPC_OPERAND_CR) == 0
 		   || (dialect & PPC_OPCODE_PPC) == 0)
-		    fprintf(out, "%ld", value);
+	    printf("%ld", value);
 	  else
 	    {
 	      if (operand->bits == 3)
-				fprintf(out, "cr%d", value);
+		printf("cr%d", value);
 	      else
 		{
 		  static const char *cbnames[4] = { "lt", "gt", "eq", "so" };
@@ -153,20 +146,15 @@ print_insn_powerpc (FILE *out, unsigned long insn, unsigned long memaddr,
 
 		  cr = value >> 2;
 		  if (cr != 0)
-			    fprintf(out, "4*cr%d", cr);
+		    printf("4*cr%d+", cr);
 		  cc = value & 3;
-			  if (cc != 0)
-			    {
-			      if (cr != 0)
-					fprintf(out, "+");
-			      fprintf(out, "%s", cbnames[cc]);
-			    }
+		  printf("%s", cbnames[cc]);
 		}
 	    }
 
 	  if (need_paren)
 	    {
-	      fprintf(out, ")");
+	      printf(")");
 	      need_paren = 0;
 	    }
 
@@ -174,7 +162,7 @@ print_insn_powerpc (FILE *out, unsigned long insn, unsigned long memaddr,
 	    need_comma = 1;
 	  else
 	    {
-	      fprintf(out, "(");
+	      printf("(");
 	      need_paren = 1;
 	    }
 	}
@@ -183,8 +171,14 @@ print_insn_powerpc (FILE *out, unsigned long insn, unsigned long memaddr,
       return 4;
     }
 
+  if ((dialect & PPC_OPCODE_ANY) != 0)
+    {
+      dialect = ~PPC_OPCODE_ANY;
+      goto again;
+    }
+
   /* We could not find a match.  */
-  fprintf(out, ".long 0x%lx", insn);
+  printf(".long 0x%lx", insn);
 
   return 4;
 }

arch/ppc64/xmon/ppc.h

 /* ppc.h -- Header file for PowerPC opcode table
-   Copyright 1994 Free Software Foundation, Inc.
+   Copyright 1994, 1995, 1999, 2000, 2001, 2002, 2003
+   Free Software Foundation, Inc.
    Written by Ian Lance Taylor, Cygnus Support
 
 This file is part of GDB, GAS, and the GNU binutils.
@@ -58,24 +59,80 @@ extern const int powerpc_num_opcodes;
 /* Values defined for the flags field of a struct powerpc_opcode.  */
 
 /* Opcode is defined for the PowerPC architecture.  */
-#define PPC_OPCODE_PPC (01)
+#define PPC_OPCODE_PPC			 1
 
 /* Opcode is defined for the POWER (RS/6000) architecture.  */
-#define PPC_OPCODE_POWER (02)
+#define PPC_OPCODE_POWER		 2
 
 /* Opcode is defined for the POWER2 (Rios 2) architecture.  */
-#define PPC_OPCODE_POWER2 (04)
+#define PPC_OPCODE_POWER2		 4
 
 /* Opcode is only defined on 32 bit architectures.  */
-#define PPC_OPCODE_32 (010)
+#define PPC_OPCODE_32			 8
 
 /* Opcode is only defined on 64 bit architectures.  */
-#define PPC_OPCODE_64 (020)
+#define PPC_OPCODE_64		      0x10
 
 /* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
    is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
    but it also supports many additional POWER instructions.  */
-#define PPC_OPCODE_601 (040)
+#define PPC_OPCODE_601		      0x20
+
+/* Opcode is supported in both the Power and PowerPC architectures
+   (ie, compiler's -mcpu=common or assembler's -mcom).  */
+#define PPC_OPCODE_COMMON	      0x40
+
+/* Opcode is supported for any Power or PowerPC platform (this is
+   for the assembler's -many option, and it eliminates duplicates).  */
+#define PPC_OPCODE_ANY		      0x80
+
+/* Opcode is supported as part of the 64-bit bridge.  */
+#define PPC_OPCODE_64_BRIDGE	     0x100
+
+/* Opcode is supported by Altivec Vector Unit */
+#define PPC_OPCODE_ALTIVEC	     0x200
+
+/* Opcode is supported by PowerPC 403 processor.  */
+#define PPC_OPCODE_403		     0x400
+
+/* Opcode is supported by PowerPC BookE processor.  */
+#define PPC_OPCODE_BOOKE	     0x800
+
+/* Opcode is only supported by 64-bit PowerPC BookE processor.  */
+#define PPC_OPCODE_BOOKE64	    0x1000
+
+/* Opcode is supported by PowerPC 440 processor.  */
+#define PPC_OPCODE_440		    0x2000
+
+/* Opcode is only supported by Power4 architecture.  */
+#define PPC_OPCODE_POWER4	    0x4000
+
+/* Opcode isn't supported by Power4 architecture.  */
+#define PPC_OPCODE_NOPOWER4	    0x8000
+
+/* Opcode is only supported by POWERPC Classic architecture.  */
+#define PPC_OPCODE_CLASSIC	   0x10000
+
+/* Opcode is only supported by e500x2 Core.  */
+#define PPC_OPCODE_SPE		   0x20000
+
+/* Opcode is supported by e500x2 Integer select APU.  */
+#define PPC_OPCODE_ISEL		   0x40000
+
+/* Opcode is an e500 SPE floating point instruction.  */
+#define PPC_OPCODE_EFS		   0x80000
+
+/* Opcode is supported by branch locking APU.  */
+#define PPC_OPCODE_BRLOCK	  0x100000
+
+/* Opcode is supported by performance monitor APU.  */
+#define PPC_OPCODE_PMR		  0x200000
+
+/* Opcode is supported by cache locking APU.  */
+#define PPC_OPCODE_CACHELCK	  0x400000
+
+/* Opcode is supported by machine check APU.  */
+#define PPC_OPCODE_RFMCI	  0x800000
 
 /* A macro to extract the major opcode from an instruction.  */
 #define PPC_OP(i) (((i) >> 26) & 0x3f)
@@ -106,8 +163,8 @@ struct powerpc_operand
      string (the operand will be inserted in any case).  If the
      operand value is legal, *ERRMSG will be unchanged (most operands
      can accept any value).  */
-  unsigned long (*insert) PARAMS ((unsigned long instruction, long op,
-				   const char **errmsg));
+  unsigned long (*insert)
+    (unsigned long instruction, long op, int dialect, const char **errmsg);
 
   /* Extraction function.  This is used by the disassembler.  To
      extract this operand type from an instruction, check this field.
@@ -126,7 +183,7 @@ struct powerpc_operand
      non-zero if this operand type can not actually be extracted from
      this operand (i.e., the instruction does not match).  If the
      operand is valid, *INVALID will not be changed.  */
-  long (*extract) PARAMS ((unsigned long instruction, int *invalid));
+  long (*extract) (unsigned long instruction, int dialect, int *invalid);
 
   /* One bit syntax flags.  */
   unsigned long flags;
@@ -210,6 +267,16 @@ extern const struct powerpc_operand powerpc_operands[];
    number is allowed).  This flag will only be set for a signed
    operand.  */
 #define PPC_OPERAND_NEGATIVE (04000)
+
+/* This operand names a vector unit register.  The disassembler
+   prints these with a leading 'v'.  */
+#define PPC_OPERAND_VR (010000)
+
+/* This operand is for the DS field in a DS form instruction.  */
+#define PPC_OPERAND_DS (020000)
+
+/* This operand is for the DQ field in a DQ form instruction.  */
+#define PPC_OPERAND_DQ (040000)
 
 /* The POWER and PowerPC assemblers use a few macros.  We keep them
    with the operands table for simplicity.  The macro table is an

include/asm-ppc64/system.h

@@ -64,6 +64,7 @@ struct pt_regs;
 #ifdef CONFIG_DEBUGGER
 
 extern int (*__debugger)(struct pt_regs *regs);
+extern int (*__debugger_ipi)(struct pt_regs *regs);
 extern int (*__debugger_bpt)(struct pt_regs *regs);
 extern int (*__debugger_sstep)(struct pt_regs *regs);
 extern int (*__debugger_iabr_match)(struct pt_regs *regs);
@@ -79,6 +80,7 @@ static inline int __NAME(struct pt_regs *regs) \
 }
 
 DEBUGGER_BOILERPLATE(debugger)
+DEBUGGER_BOILERPLATE(debugger_ipi)
 DEBUGGER_BOILERPLATE(debugger_bpt)
 DEBUGGER_BOILERPLATE(debugger_sstep)
 DEBUGGER_BOILERPLATE(debugger_iabr_match)
@@ -91,6 +93,7 @@ extern void xmon_init(void);
 
 #else
 static inline int debugger(struct pt_regs *regs) { return 0; }
+static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
 static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
 static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
 static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }