Commit 98fcb5f7 authored by Jason Wessel's avatar Jason Wessel Committed by Greg Kroah-Hartman

USB: serial: usb_debug,usb_generic_serial: implement sysrq and serial break

The usb_debug driver was modified to implement serial break handling
by using a "magic" data packet comprised of the sequence:

       0x00 0xff 0x01 0xfe   0x00 0xfe 0x01 0xff

When the tty layer requests a serial break the usb_debug driver sends
the magic packet.  On the receiving side the magic packet is thrown
away or a sysrq is activated depending on what kernel .config options
have been set.

The generic serial driver was modified as well as the usb serial
headers to generically implement sysrq processing in the same way the
non usb uart based drivers implement the sysrq handling.  This will
allow other usb serial devices to implement sysrq handling as desired.

The new usb serial functions are named similarly and implemented
similarly to the uart functions as follows:

usb_serial_handle_break <-> uart_handle_break
usb_serial_handle_sysrq_char <-> uart_handle_sysrq_char
Signed-off-by: default avatarJason Wessel <jason.wessel@windriver.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 87c1edd2
...@@ -339,6 +339,7 @@ int usb_serial_generic_write(struct tty_struct *tty, ...@@ -339,6 +339,7 @@ int usb_serial_generic_write(struct tty_struct *tty,
/* no bulk out, so return 0 bytes written */ /* no bulk out, so return 0 bytes written */
return 0; return 0;
} }
EXPORT_SYMBOL_GPL(usb_serial_generic_write);
int usb_serial_generic_write_room(struct tty_struct *tty) int usb_serial_generic_write_room(struct tty_struct *tty)
{ {
...@@ -351,7 +352,9 @@ int usb_serial_generic_write_room(struct tty_struct *tty) ...@@ -351,7 +352,9 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
spin_lock_irqsave(&port->lock, flags); spin_lock_irqsave(&port->lock, flags);
if (serial->type->max_in_flight_urbs) { if (serial->type->max_in_flight_urbs) {
if (port->urbs_in_flight < serial->type->max_in_flight_urbs) if (port->urbs_in_flight < serial->type->max_in_flight_urbs)
room = port->bulk_out_size; room = port->bulk_out_size *
(serial->type->max_in_flight_urbs -
port->urbs_in_flight);
} else if (serial->num_bulk_out && !(port->write_urb_busy)) { } else if (serial->num_bulk_out && !(port->write_urb_busy)) {
room = port->bulk_out_size; room = port->bulk_out_size;
} }
...@@ -385,7 +388,8 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) ...@@ -385,7 +388,8 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
} }
static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags) void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
gfp_t mem_flags)
{ {
struct urb *urb = port->read_urb; struct urb *urb = port->read_urb;
struct usb_serial *serial = port->serial; struct usb_serial *serial = port->serial;
...@@ -406,25 +410,28 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags) ...@@ -406,25 +410,28 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
"%s - failed resubmitting read urb, error %d\n", "%s - failed resubmitting read urb, error %d\n",
__func__, result); __func__, result);
} }
EXPORT_SYMBOL_GPL(usb_serial_generic_resubmit_read_urb);
/* Push data to tty layer and resubmit the bulk read URB */ /* Push data to tty layer and resubmit the bulk read URB */
static void flush_and_resubmit_read_urb(struct usb_serial_port *port) static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
{ {
struct urb *urb = port->read_urb; struct urb *urb = port->read_urb;
struct tty_struct *tty = tty_port_tty_get(&port->port); struct tty_struct *tty = tty_port_tty_get(&port->port);
int room; char *ch = (char *)urb->transfer_buffer;
int i;
if (!tty)
goto done;
/* Push data to tty */ /* Push data to tty */
if (tty && urb->actual_length) { for (i = 0; i < urb->actual_length; i++, ch++) {
room = tty_buffer_request_room(tty, urb->actual_length); if (!usb_serial_handle_sysrq_char(port, *ch))
if (room) { tty_insert_flip_char(tty, *ch, TTY_NORMAL);
tty_insert_flip_string(tty, urb->transfer_buffer, room);
tty_flip_buffer_push(tty);
}
} }
tty_flip_buffer_push(tty);
tty_kref_put(tty); tty_kref_put(tty);
done:
resubmit_read_urb(port, GFP_ATOMIC); usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
} }
void usb_serial_generic_read_bulk_callback(struct urb *urb) void usb_serial_generic_read_bulk_callback(struct urb *urb)
...@@ -515,10 +522,35 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty) ...@@ -515,10 +522,35 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
if (was_throttled) { if (was_throttled) {
/* Resume reading from device */ /* Resume reading from device */
resubmit_read_urb(port, GFP_KERNEL); usb_serial_generic_resubmit_read_urb(port, GFP_KERNEL);
} }
} }
int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
{
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
handle_sysrq(ch, tty_port_tty_get(&port->port));
port->sysrq = 0;
return 1;
}
port->sysrq = 0;
}
return 0;
}
EXPORT_SYMBOL_GPL(usb_serial_handle_sysrq_char);
int usb_serial_handle_break(struct usb_serial_port *port)
{
if (!port->sysrq) {
port->sysrq = jiffies + HZ*5;
return 1;
}
port->sysrq = 0;
return 0;
}
EXPORT_SYMBOL_GPL(usb_serial_handle_break);
void usb_serial_generic_shutdown(struct usb_serial *serial) void usb_serial_generic_shutdown(struct usb_serial *serial)
{ {
int i; int i;
......
...@@ -17,6 +17,17 @@ ...@@ -17,6 +17,17 @@
#define URB_DEBUG_MAX_IN_FLIGHT_URBS 4000 #define URB_DEBUG_MAX_IN_FLIGHT_URBS 4000
#define USB_DEBUG_MAX_PACKET_SIZE 8 #define USB_DEBUG_MAX_PACKET_SIZE 8
#define USB_DEBUG_BRK_SIZE 8
static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
0x00,
0xff,
0x01,
0xfe,
0x00,
0xfe,
0x01,
0xff,
};
static struct usb_device_id id_table [] = { static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0525, 0x127a) }, { USB_DEVICE(0x0525, 0x127a) },
...@@ -39,6 +50,32 @@ static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port, ...@@ -39,6 +50,32 @@ static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
return usb_serial_generic_open(tty, port, filp); return usb_serial_generic_open(tty, port, filp);
} }
/* This HW really does not support a serial break, so one will be
* emulated when ever the break state is set to true.
*/
static void usb_debug_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
if (!break_state)
return;
usb_serial_generic_write(tty, port, USB_DEBUG_BRK, USB_DEBUG_BRK_SIZE);
}
static void usb_debug_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
if (urb->actual_length == USB_DEBUG_BRK_SIZE &&
memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
USB_DEBUG_BRK_SIZE) == 0) {
usb_serial_handle_break(port);
usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
return;
}
usb_serial_generic_read_bulk_callback(urb);
}
static struct usb_serial_driver debug_device = { static struct usb_serial_driver debug_device = {
.driver = { .driver = {
.owner = THIS_MODULE, .owner = THIS_MODULE,
...@@ -48,6 +85,8 @@ static struct usb_serial_driver debug_device = { ...@@ -48,6 +85,8 @@ static struct usb_serial_driver debug_device = {
.num_ports = 1, .num_ports = 1,
.open = usb_debug_open, .open = usb_debug_open,
.max_in_flight_urbs = URB_DEBUG_MAX_IN_FLIGHT_URBS, .max_in_flight_urbs = URB_DEBUG_MAX_IN_FLIGHT_URBS,
.break_ctl = usb_debug_break_ctl,
.read_bulk_callback = usb_debug_read_bulk_callback,
}; };
static int __init debug_init(void) static int __init debug_init(void)
......
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#include <linux/kref.h> #include <linux/kref.h>
#include <linux/mutex.h> #include <linux/mutex.h>
#include <linux/sysrq.h>
#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */
#define SERIAL_TTY_MINORS 254 /* loads of devices :) */ #define SERIAL_TTY_MINORS 254 /* loads of devices :) */
...@@ -99,6 +100,7 @@ struct usb_serial_port { ...@@ -99,6 +100,7 @@ struct usb_serial_port {
char throttled; char throttled;
char throttle_req; char throttle_req;
char console; char console;
unsigned long sysrq; /* sysrq timeout */
struct device dev; struct device dev;
}; };
#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
...@@ -301,6 +303,12 @@ extern void usb_serial_generic_unthrottle(struct tty_struct *tty); ...@@ -301,6 +303,12 @@ extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
extern void usb_serial_generic_shutdown(struct usb_serial *serial); extern void usb_serial_generic_shutdown(struct usb_serial *serial);
extern int usb_serial_generic_register(int debug); extern int usb_serial_generic_register(int debug);
extern void usb_serial_generic_deregister(void); extern void usb_serial_generic_deregister(void);
extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
gfp_t mem_flags);
extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
unsigned int ch);
extern int usb_serial_handle_break(struct usb_serial_port *port);
extern int usb_serial_bus_register(struct usb_serial_driver *device); extern int usb_serial_bus_register(struct usb_serial_driver *device);
extern void usb_serial_bus_deregister(struct usb_serial_driver *device); extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment