Merge redhat.com:/md0/linus-2.5 into redhat.com:/md0/aio-2.5

MAINTAINERS

@@ -738,7 +738,7 @@ S:	Maintained
 
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer
-P:	Dave Jeffrey	
+P:	Dave Jeffery
 M:	ipslinux@adaptec.com
 W:	http://www.developer.ibm.com/welcome/netfinity/serveraid.html
 S:	Supported 

arch/alpha/Config.help

@@ -251,6 +251,10 @@ CONFIG_ALPHA_PRIMO
 CONFIG_ALPHA_GAMMA
   Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
 
+CONFIG_ALPHA_EV67
+  Is this a machine based on the EV67 core?  If in doubt, select N here
+  and the machine will be treated as an EV6.
+
 CONFIG_ALPHA_SRM
   There are two different types of booting firmware on Alphas: SRM,
   which is command line driven, and ARC, which uses menus and arrow
@@ -610,3 +614,14 @@ CONFIG_DEBUG_SPINLOCK
   best used in conjunction with the NMI watchdog so that spinlock
   deadlocks are also debuggable.
 
+CONFIG_DEBUG_RWLOCK
+  If you say Y here then read-write lock processing will count how many
+  times it has tried to get the lock and issue an error message after
+  too many attempts.  If you suspect a rwlock problem or a kernel
+  hacker asks for this option then say Y.  Otherwise say N.
+
+CONFIG_DEBUG_SEMAPHORE
+  If you say Y here then semaphore processing will issue lots of
+  verbose debugging messages.  If you suspect a semaphore problem or a
+  kernel hacker asks for this option then say Y.  Otherwise say N.
+

arch/alpha/Makefile

@@ -99,30 +99,32 @@ export libs-y
 
 MAKEBOOT = $(MAKE) -C arch/alpha/boot
 
-rawboot:
+rawboot:	vmlinux
 	@$(MAKEBOOT) rawboot
 
+boot:	vmlinux
+	@$(MAKEBOOT)
+
 #
 # My boot writes directly to a specific disk partition, I doubt most
 # people will want to do that without changes..
 #
-msb my-special-boot:
+msb my-special-boot:	vmlinux
 	@$(MAKEBOOT) msb
 
-bootimage:
+bootimage:	vmlinux
 	@$(MAKEBOOT) bootimage
 
-srmboot:
+srmboot:	vmlinux
 	@$(MAKEBOOT) srmboot
 
 archclean:
-	@$(MAKE) -C arch/alpha/kernel clean
 	@$(MAKEBOOT) clean
 
 archmrproper:
 	rm -f include/asm-alpha/asm_offsets.h
 
-bootpfile:
+bootpfile:	vmlinux
 	@$(MAKEBOOT) bootpfile
 
 

arch/alpha/boot/Makefile

@@ -8,7 +8,9 @@
 # Copyright (C) 1994 by Linus Torvalds
 #
 
-LINKFLAGS = -static -T bootloader.lds #-N -relax
+LINKFLAGS = -static -T bootloader.lds -uvsprintf #-N -relax
+
+CFLAGS := $(CFLAGS) -I$(TOPDIR)/include
 
 .S.s:
 	$(CPP) $(AFLAGS) -traditional -o $*.o $<

arch/alpha/kernel/Makefile

@@ -8,8 +8,9 @@ EXTRA_AFLAGS	:= $(CFLAGS)
 
 export-objs := alpha_ksyms.o
 
-obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o irq_alpha.o \
-	    signal.o setup.o ptrace.o time.o semaphore.o alpha_ksyms.o
+obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
+	    irq_alpha.o signal.o setup.o ptrace.o time.o semaphore.o \
+	    alpha_ksyms.o systbls.o
 
 #
 # FIXME!

arch/alpha/kernel/alpha_ksyms.c

@@ -161,7 +161,6 @@ EXPORT_SYMBOL(sys_read);
 EXPORT_SYMBOL(sys_lseek);
 EXPORT_SYMBOL(__kernel_execve);
 EXPORT_SYMBOL(sys_setsid);
-EXPORT_SYMBOL(sys_sync);
 EXPORT_SYMBOL(sys_wait4);
 
 /* Networking helper routines. */

arch/alpha/kernel/process.c

@@ -191,26 +191,13 @@ machine_power_off(void)
 	common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
 }
 
+/* Used by sysrq-p, among others.  I don't believe r9-r15 are ever
+   saved in the context it's used.  */
+
 void
-show_regs(struct pt_regs * regs)
+show_regs(struct pt_regs *regs)
 {
-	printk("\n");
-	printk("Pid: %d, comm: %20s\n", current->pid, current->comm);
-	printk("ps: %04lx pc: [<%016lx>] CPU %d    %s\n",
-	       regs->ps, regs->pc, smp_processor_id(), print_tainted());
-	printk("rp: [<%016lx>] sp: %p\n", regs->r26, regs+1);
-	printk(" r0: %016lx  r1: %016lx  r2: %016lx  r3: %016lx\n",
-	       regs->r0, regs->r1, regs->r2, regs->r3);
-	printk(" r4: %016lx  r5: %016lx  r6: %016lx  r7: %016lx\n",
-	       regs->r4, regs->r5, regs->r6, regs->r7);
-	printk(" r8: %016lx r16: %016lx r17: %016lx r18: %016lx\n",
-	       regs->r8, regs->r16, regs->r17, regs->r18);
-	printk("r19: %016lx r20: %016lx r21: %016lx r22: %016lx\n",
-	       regs->r19, regs->r20, regs->r21, regs->r22);
-	printk("r23: %016lx r24: %016lx r25: %016lx r26: %016lx\n",
-	       regs->r23, regs->r24, regs->r25, regs->r26);
-	printk("r27: %016lx r28: %016lx r29: %016lx hae: %016lx\n",
-	       regs->r27, regs->r28, regs->gp, regs->hae);
+	dik_show_regs(regs, 0);
 }
 
 /*

arch/alpha/kernel/setup.c

@@ -37,6 +37,11 @@
 #include <linux/blk.h>
 #endif
 
+#ifdef CONFIG_MAGIC_SYSRQ
+#include <linux/sysrq.h>
+#include <linux/reboot.h>
+#endif
+
 #include <linux/notifier.h>
 extern struct notifier_block *panic_notifier_list;
 static int alpha_panic_event(struct notifier_block *, unsigned long, void *);
@@ -539,6 +544,15 @@ setup_arch(char **cmdline_p)
 		register_srm_console();
 	}
 
+#ifdef CONFIG_MAGIC_SYSRQ
+	/* If we're using SRM, make sysrq-b halt back to the prom,
+	   not auto-reboot.  */
+	if (alpha_using_srm) {
+		struct sysrq_key_op *op = __sysrq_get_key_op('b');
+		op->handler = (void *) machine_halt;
+	}
+#endif
+
 	/*
 	 * Indentify and reconfigure for the current system.
 	 */

arch/alpha/lib/Makefile

@@ -51,14 +51,16 @@ obj-$(CONFIG_SMP) += dec_and_lock.o
 
 include $(TOPDIR)/Rules.make
 
-__divqu.o: $(ev6)divide.S
-	$(CC) $(AFLAGS) -DDIV -c -o __divqu.o $(ev6)divide.S
+$(obj)/__divqu.o: $(obj)/$(ev6)divide.S
+	$(CC) $(AFLAGS) -DDIV -c -o $(obj)/__divqu.o $(obj)/$(ev6)divide.S
 
-__remqu.o: $(ev6)divide.S
-	$(CC) $(AFLAGS) -DREM -c -o __remqu.o $(ev6)divide.S
+$(obj)/__remqu.o: $(obj)/$(ev6)divide.S
+	$(CC) $(AFLAGS) -DREM -c -o $(obj)/__remqu.o $(obj)/$(ev6)divide.S
 
-__divlu.o: $(ev6)divide.S
-	$(CC) $(AFLAGS) -DDIV -DINTSIZE -c -o __divlu.o $(ev6)divide.S
+$(obj)/__divlu.o: $(obj)/$(ev6)divide.S
+	$(CC) $(AFLAGS) -DDIV -DINTSIZE \
+		-c -o $(obj)/__divlu.o $(obj)/$(ev6)divide.S
 
-__remlu.o: $(ev6)divide.S
-	$(CC) $(AFLAGS) -DREM -DINTSIZE -c -o __remlu.o $(ev6)divide.S
+$(obj)/__remlu.o: $(obj)/$(ev6)divide.S
+	$(CC) $(AFLAGS) -DREM -DINTSIZE \
+		-c -o $(obj)/__remlu.o $(obj)/$(ev6)divide.S

arch/alpha/lib/stxncpy.S

@@ -278,7 +278,7 @@ $u_eoc:
 	extqh	t2, a1, t0	# e0    : extract low bits for last word
 	or	t1, t0, t1	# e1    :
 
-1:	cmpbge	zero, t1, t7
+1:	cmpbge	zero, t1, t8
 	mov	t1, t0
 
 $u_eocfin:			# end-of-count, final word

arch/alpha/mm/fault.c

@@ -125,11 +125,10 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		goto bad_area;
 	if (expand_stack(vma, address))
 		goto bad_area;
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
+
+	/* Ok, we have a good vm_area for this memory access, so
+	   we can handle it.  */
+ good_area:
 	if (cause < 0) {
 		if (!(vma->vm_flags & VM_EXEC))
 			goto bad_area;
@@ -143,11 +142,9 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	}
 
  survive:
-	/*
-	 * If for any reason at all we couldn't handle the fault,
-	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
-	 */
+	/* If for any reason at all we couldn't handle the fault,
+	   make sure we exit gracefully rather than endlessly redo
+	   the fault.  */
 	fault = handle_mm_fault(mm, vma, address, cause > 0);
 	up_read(&mm->mmap_sem);
 
@@ -155,14 +152,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		goto out_of_memory;
 	if (fault == 0)
 		goto do_sigbus;
-
 	return;
 
-/*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
-bad_area:
+	/* Something tried to access memory that isn't in our memory map.
+	   Fix it, but check if it's kernel or user first.  */
+ bad_area:
 	up_read(&mm->mmap_sem);
 
 	if (user_mode(regs)) {
@@ -170,7 +164,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		return;
 	}
 
-no_context:
+ no_context:
 	/* Are we prepared to handle this fault as an exception?  */
 	if ((fixup = search_exception_table(regs->pc, regs->gp)) != 0) {
 		unsigned long newpc;
@@ -183,20 +177,16 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		return;
 	}
 
-/*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
+	/* Oops. The kernel tried to access some bad page. We'll have to
+	   terminate things with extreme prejudice.  */
 	printk(KERN_ALERT "Unable to handle kernel paging request at "
 	       "virtual address %016lx\n", address);
 	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
 	do_exit(SIGKILL);
 
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
+	/* We ran out of memory, or some other thing happened to us that
+	   made us unable to handle the page fault gracefully.  */
+ out_of_memory:
 	if (current->pid == 1) {
 		yield();
 		down_read(&mm->mmap_sem);
@@ -208,18 +198,16 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		goto no_context;
 	do_exit(SIGKILL);
 
-do_sigbus:
-	/*
-	 * Send a sigbus, regardless of whether we were in kernel
-	 * or user mode.
-	 */
+ do_sigbus:
+	/* Send a sigbus, regardless of whether we were in kernel
+	   or user mode.  */
 	force_sig(SIGBUS, current);
 	if (!user_mode(regs))
 		goto no_context;
 	return;
 
 #ifdef CONFIG_ALPHA_LARGE_VMALLOC
-vmalloc_fault:
+ vmalloc_fault:
 	if (user_mode(regs)) {
 		force_sig(SIGSEGV, current);
 		return;

arch/alpha/vmlinux.lds.S

@@ -58,10 +58,11 @@ SECTIONS
 	__initcall_end = .;
   }
 
-  . = ALIGN(64);
-  __per_cpu_start = .;
-  .data.percpu  : { *(.data.percpu) }
-  __per_cpu_end = .;
+  .data.percpu ALIGN(64): {
+	__per_cpu_start = .;
+	*(.data.percpu)
+	__per_cpu_end = .;
+  }
 
   /* The initial task and kernel stack */
   .data.init_thread ALIGN(2*8192) : {

drivers/ide/ide-disk.c

@@ -1664,14 +1664,6 @@ static int idedisk_resume(struct device *dev, u32 level)
 /* This is just a hook for the overall driver tree.
  */
 
-static struct device_driver idedisk_devdrv = {
-	.bus = &ide_bus_type,
-	.name = "IDE disk driver",
-
-	.suspend = idedisk_suspend,
-	.resume = idedisk_resume,
-};
-
 static int idedisk_ioctl (ide_drive_t *drive, struct inode *inode,
 	struct file *file, unsigned int cmd, unsigned long arg)
 {
@@ -1717,12 +1709,6 @@ static void idedisk_setup (ide_drive_t *drive)
 			drive->doorlocking = 1;
 		}
 	}
-	{
-		sprintf(drive->disk->disk_dev.name, "ide-disk");
-		drive->disk->disk_dev.driver = &idedisk_devdrv;
-		drive->disk->disk_dev.driver_data = drive;
-	}
-
 #if 1
 	(void) probe_lba_addressing(drive, 1);
 #else
@@ -1806,7 +1792,6 @@ static int idedisk_cleanup (ide_drive_t *drive)
 {
 	struct gendisk *g = drive->disk;
 
-	device_unregister(&drive->disk->disk_dev);
 	if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache)
 		if (do_idedisk_flushcache(drive))
 			printk (KERN_INFO "%s: Write Cache FAILED Flushing!\n",
@@ -1905,7 +1890,6 @@ static void __exit idedisk_exit (void)
 static int idedisk_init (void)
 {
 	ide_register_driver(&idedisk_driver);
-	driver_register(&idedisk_devdrv);
 	return 0;
 }
 

drivers/ide/ide-probe.c

@@ -998,15 +998,6 @@ static void init_gendisk (ide_hwif_t *hwif)
 		sprintf(disk->disk_name,"hd%c",'a'+hwif->index*MAX_DRIVES+unit);
 		disk->minor_shift = PARTN_BITS; 
 		disk->fops = ide_fops;
-
-		snprintf(disk->disk_dev.bus_id,BUS_ID_SIZE,"%u.%u",
-			 hwif->index,unit);
-		snprintf(disk->disk_dev.name,DEVICE_NAME_SIZE,
-			 "%s","IDE Drive");
-		disk->disk_dev.parent = &hwif->gendev;
-		disk->disk_dev.bus = &ide_bus_type;
-		if (hwif->drives[unit].present)
-			device_register(&disk->disk_dev);
 		hwif->drives[unit].disk = disk;
 	}
 
@@ -1020,6 +1011,20 @@ static void init_gendisk (ide_hwif_t *hwif)
 		if (hwif->drives[unit].present)
 			hwif->drives[unit].de = devfs_mk_dir(ide_devfs_handle, name, NULL);
 	}
+	
+	for (unit = 0; unit < units; ++unit) {
+		ide_drive_t * drive = &hwif->drives[unit];
+
+		snprintf(drive->gendev.bus_id,BUS_ID_SIZE,"%u.%u",
+			 hwif->index,unit);
+		snprintf(drive->gendev.name,DEVICE_NAME_SIZE,
+			 "%s","IDE Drive");
+		drive->gendev.parent = &hwif->gendev;
+		drive->gendev.bus = &ide_bus_type;
+		if (drive->present)
+			device_register(&drive->gendev);
+	}
+
 	return;
 
 err_kmalloc_gd:

drivers/ide/ide.c

@@ -2463,6 +2463,7 @@ int ata_attach(ide_drive_t *drive)
 		if (driver->attach(drive) == 0) {
 			if (driver->owner)
 				__MOD_DEC_USE_COUNT(driver->owner);
+			drive->gendev.driver = &driver->gen_driver;
 			return 0;
 		}
 		spin_lock(&drivers_lock);
@@ -3422,6 +3423,21 @@ int ide_unregister_subdriver (ide_drive_t *drive)
 
 EXPORT_SYMBOL(ide_unregister_subdriver);
 
+static int ide_drive_remove(struct device * dev)
+{
+	ide_drive_t * drive = container_of(dev,ide_drive_t,gendev);
+	ide_driver_t * driver = drive->driver;
+
+	if (driver) {
+		if (driver->standby)
+			driver->standby(drive);
+		if (driver->cleanup)
+			driver->cleanup(drive);
+	}
+	
+	return 0;
+}
+
 int ide_register_driver(ide_driver_t *driver)
 {
 	struct list_head list;
@@ -3440,7 +3456,10 @@ int ide_register_driver(ide_driver_t *driver)
 		list_del_init(&drive->list);
 		ata_attach(drive);
 	}
-	return 0;
+	driver->gen_driver.name = driver->name;
+	driver->gen_driver.bus = &ide_bus_type;
+	driver->gen_driver.remove = ide_drive_remove;
+	return driver_register(&driver->gen_driver);
 }
 
 EXPORT_SYMBOL(ide_register_driver);
@@ -3491,52 +3510,6 @@ EXPORT_SYMBOL(ide_lock);
 EXPORT_SYMBOL(ide_probe);
 EXPORT_SYMBOL(ide_devfs_handle);
 
-static int ide_notify_reboot (struct notifier_block *this, unsigned long event, void *x)
-{
-	ide_hwif_t *hwif;
-	ide_drive_t *drive;
-	int i, unit;
-
-	switch (event) {
-		case SYS_HALT:
-		case SYS_POWER_OFF:
-		case SYS_RESTART:
-			break;
-		default:
-			return NOTIFY_DONE;
-	}
-
-	printk(KERN_INFO "flushing ide devices: ");
-
-	for (i = 0; i < MAX_HWIFS; i++) {
-		hwif = &ide_hwifs[i];
-		if (!hwif->present)
-			continue;
-		for (unit = 0; unit < MAX_DRIVES; ++unit) {
-			drive = &hwif->drives[unit];
-			if (!drive->present)
-				continue;
-
-			/* set the drive to standby */
-			printk("%s ", drive->name);
-			if (event != SYS_RESTART)
-				if (drive->driver != NULL && DRIVER(drive)->standby(drive))
-				continue;
-
-			if (drive->driver != NULL && DRIVER(drive)->cleanup(drive))
-				continue;
-		}
-	}
-	printk("\n");
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block ide_notifier = {
-	ide_notify_reboot,
-	NULL,
-	5
-};
-
 struct bus_type ide_bus_type = {
 	.name		= "ide",
 };
@@ -3562,7 +3535,6 @@ int __init ide_init (void)
 	ide_init_builtin_drivers();
 	initializing = 0;
 
-	register_reboot_notifier(&ide_notifier);
 	return 0;
 }
 
@@ -3597,7 +3569,6 @@ void cleanup_module (void)
 {
 	int index;
 
-	unregister_reboot_notifier(&ide_notifier);
 	for (index = 0; index < MAX_HWIFS; ++index) {
 		ide_unregister(index);
 #if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)

drivers/net/3c501.c

@@ -11,12 +11,11 @@
     Do not purchase this card, even as a joke.  It's performance is horrible,
     and it breaks in many ways.
 
-    The author may be reached as becker@scyld.com, or C/O
+    The original author may be reached as becker@scyld.com, or C/O
 	Scyld Computing Corporation
 	410 Severn Ave., Suite 210
 	Annapolis MD 21403
 
-
     Fixed (again!) the missing interrupt locking on TX/RX shifting.
     		Alan Cox <Alan.Cox@linux.org>
 
@@ -34,7 +33,16 @@
     		
     Cleaned up for 2.3.x because we broke SMP now. 
     		20000208 Alan Cox <alan@redhat.com>
+
+    Check up pass for 2.5. Nothing significant changed
+    		20021009 Alan Cox <alan@redhat.com>
     		
+   For the avoidance of doubt the "preferred form" of this code is one which
+   is in an open non patent encumbered format. Where cryptographic key signing
+   forms part of the process of creating an executable the information
+   including keys needed to generate an equivalently functional executable
+   are deemed to be part of the source code.
+
 */
 
 
@@ -88,7 +96,7 @@
  */
 
 #define DRV_NAME	"3c501"
-#define DRV_VERSION	"2001/11/17"
+#define DRV_VERSION	"2002/10/09"
 
 
 static const char version[] =
@@ -122,113 +130,21 @@ static const char version[] =
 #include <linux/skbuff.h>
 #include <linux/init.h>
 
+#include "3c501.h"
+
 /* A zero-terminated list of I/O addresses to be probed.
    The 3c501 can be at many locations, but here are the popular ones. */
 static unsigned int netcard_portlist[] __initdata = { 
 	0x280, 0x300, 0
 };
 
-
-/*
- *	Index to functions.
- */
-
-int el1_probe(struct net_device *dev);
-static int  el1_probe1(struct net_device *dev, int ioaddr);
-static int  el_open(struct net_device *dev);
-static void el_timeout(struct net_device *dev);
-static int  el_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static void el_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-static void el_receive(struct net_device *dev);
-static void el_reset(struct net_device *dev);
-static int  el1_close(struct net_device *dev);
-static struct net_device_stats *el1_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
-
-#define EL1_IO_EXTENT	16
-
-#ifndef EL_DEBUG
-#define EL_DEBUG  0	/* use 0 for production, 1 for devel., >2 for debug */
-#endif			/* Anything above 5 is wordy death! */
-#define debug el_debug
-static int el_debug = EL_DEBUG;
-
-/*
- *	Board-specific info in dev->priv.
- */
-
-struct net_local
-{
-	struct net_device_stats stats;
-	int		tx_pkt_start;	/* The length of the current Tx packet. */
-	int		collisions;	/* Tx collisions this packet */
-	int		loading;	/* Spot buffer load collisions */
-	int		txing;		/* True if card is in TX mode */
-	spinlock_t	lock;		/* Serializing lock */
-};
-
-
-#define RX_STATUS (ioaddr + 0x06)
-#define RX_CMD	  RX_STATUS
-#define TX_STATUS (ioaddr + 0x07)
-#define TX_CMD	  TX_STATUS
-#define GP_LOW 	  (ioaddr + 0x08)
-#define GP_HIGH   (ioaddr + 0x09)
-#define RX_BUF_CLR (ioaddr + 0x0A)
-#define RX_LOW	  (ioaddr + 0x0A)
-#define RX_HIGH   (ioaddr + 0x0B)
-#define SAPROM	  (ioaddr + 0x0C)
-#define AX_STATUS (ioaddr + 0x0E)
-#define AX_CMD	  AX_STATUS
-#define DATAPORT  (ioaddr + 0x0F)
-#define TX_RDY 0x08		/* In TX_STATUS */
-
-#define EL1_DATAPTR	0x08
-#define EL1_RXPTR	0x0A
-#define EL1_SAPROM	0x0C
-#define EL1_DATAPORT 	0x0f
-
-/*
- *	Writes to the ax command register.
- */
-
-#define AX_OFF	0x00			/* Irq off, buffer access on */
-#define AX_SYS  0x40			/* Load the buffer */
-#define AX_XMIT 0x44			/* Transmit a packet */
-#define AX_RX	0x48			/* Receive a packet */
-#define AX_LOOP	0x0C			/* Loopback mode */
-#define AX_RESET 0x80
-
-/*
- *	Normal receive mode written to RX_STATUS.  We must intr on short packets
- *	to avoid bogus rx lockups.
- */
-
-#define RX_NORM 0xA8		/* 0x68 == all addrs, 0xA8 only to me. */
-#define RX_PROM 0x68		/* Senior Prom, uhmm promiscuous mode. */
-#define RX_MULT 0xE8		/* Accept multicast packets. */
-#define TX_NORM 0x0A		/* Interrupt on everything that might hang the chip */
-
-/*
- *	TX_STATUS register.
- */
-
-#define TX_COLLISION 0x02
-#define TX_16COLLISIONS 0x04
-#define TX_READY 0x08
-
-#define RX_RUNT 0x08
-#define RX_MISSED 0x01		/* Missed a packet due to 3c501 braindamage. */
-#define RX_GOOD	0x30		/* Good packet 0x20, or simple overflow 0x10. */
-
 
 /*
  *	The boilerplate probe code.
  */
 
 /**
- * el1_probe:
+ * el1_probe:		-	probe for a 3c501
  * @dev: The device structure passed in to probe. 
  *
  * This can be called from two places. The network layer will probe using
@@ -556,7 +472,6 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	while(1);
 
 }
-
 
 /**
  * el_interrupt:
@@ -1072,12 +987,8 @@ void cleanup_module(void)
 }
 
 #endif /* MODULE */
+
+MODULE_AUTHOR("Donald Becker, Alan Cox");
+MODULE_DESCRIPTION("Support for the ancient 3Com 3c501 ethernet card");
 MODULE_LICENSE("GPL");
 
-
-/*
- * Local variables:
- *  compile-command: "gcc -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer  -m486 -c -o 3c501.o 3c501.c"
- *  kept-new-versions: 5
- * End:
- */

drivers/net/3c501.h

+
+/*
+ *	Index to functions.
+ */
+
+int el1_probe(struct net_device *dev);
+static int  el1_probe1(struct net_device *dev, int ioaddr);
+static int  el_open(struct net_device *dev);
+static void el_timeout(struct net_device *dev);
+static int  el_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void el_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void el_receive(struct net_device *dev);
+static void el_reset(struct net_device *dev);
+static int  el1_close(struct net_device *dev);
+static struct net_device_stats *el1_get_stats(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+
+#define EL1_IO_EXTENT	16
+
+#ifndef EL_DEBUG
+#define EL_DEBUG  0	/* use 0 for production, 1 for devel., >2 for debug */
+#endif			/* Anything above 5 is wordy death! */
+#define debug el_debug
+static int el_debug = EL_DEBUG;
+
+/*
+ *	Board-specific info in dev->priv.
+ */
+
+struct net_local
+{
+	struct net_device_stats stats;
+	int		tx_pkt_start;	/* The length of the current Tx packet. */
+	int		collisions;	/* Tx collisions this packet */
+	int		loading;	/* Spot buffer load collisions */
+	int		txing;		/* True if card is in TX mode */
+	spinlock_t	lock;		/* Serializing lock */
+};
+
+
+#define RX_STATUS (ioaddr + 0x06)
+#define RX_CMD	  RX_STATUS
+#define TX_STATUS (ioaddr + 0x07)
+#define TX_CMD	  TX_STATUS
+#define GP_LOW 	  (ioaddr + 0x08)
+#define GP_HIGH   (ioaddr + 0x09)
+#define RX_BUF_CLR (ioaddr + 0x0A)
+#define RX_LOW	  (ioaddr + 0x0A)
+#define RX_HIGH   (ioaddr + 0x0B)
+#define SAPROM	  (ioaddr + 0x0C)
+#define AX_STATUS (ioaddr + 0x0E)
+#define AX_CMD	  AX_STATUS
+#define DATAPORT  (ioaddr + 0x0F)
+#define TX_RDY 0x08		/* In TX_STATUS */
+
+#define EL1_DATAPTR	0x08
+#define EL1_RXPTR	0x0A
+#define EL1_SAPROM	0x0C
+#define EL1_DATAPORT 	0x0f
+
+/*
+ *	Writes to the ax command register.
+ */
+
+#define AX_OFF	0x00			/* Irq off, buffer access on */
+#define AX_SYS  0x40			/* Load the buffer */
+#define AX_XMIT 0x44			/* Transmit a packet */
+#define AX_RX	0x48			/* Receive a packet */
+#define AX_LOOP	0x0C			/* Loopback mode */
+#define AX_RESET 0x80
+
+/*
+ *	Normal receive mode written to RX_STATUS.  We must intr on short packets
+ *	to avoid bogus rx lockups.
+ */
+
+#define RX_NORM 0xA8		/* 0x68 == all addrs, 0xA8 only to me. */
+#define RX_PROM 0x68		/* Senior Prom, uhmm promiscuous mode. */
+#define RX_MULT 0xE8		/* Accept multicast packets. */
+#define TX_NORM 0x0A		/* Interrupt on everything that might hang the chip */
+
+/*
+ *	TX_STATUS register.
+ */
+
+#define TX_COLLISION 0x02
+#define TX_16COLLISIONS 0x04
+#define TX_READY 0x08
+
+#define RX_RUNT 0x08
+#define RX_MISSED 0x01		/* Missed a packet due to 3c501 braindamage. */
+#define RX_GOOD	0x30		/* Good packet 0x20, or simple overflow 0x10. */
+

drivers/scsi/cpqfcTSstructs.h

@@ -21,7 +21,6 @@
 #define CPQFCTSSTRUCTS_H
 
 #include <linux/timer.h>  // timer declaration in our host data
-#include <linux/tqueue.h> // task queue sched
 #include <asm/atomic.h>
 #include "cpqfcTSioctl.h"
 

drivers/scsi/in2000.h

@@ -397,13 +397,15 @@ struct IN2000_hostdata {
 # define CLISPIN_UNLOCK(host,flags) spin_unlock_irqrestore(host->host_lock, \
 							   flags)
 
-int in2000_detect(Scsi_Host_Template *) in2000__INIT;
-int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int in2000_abort(Scsi_Cmnd *);
-void in2000_setup(char *, int *) in2000__INIT;
-int in2000_proc_info(char *, char **, off_t, int, int, int);
-int in2000_biosparam(struct scsi_disk *, struct block_device *, int *);
-int in2000_reset(Scsi_Cmnd *, unsigned int);
+static int in2000_detect(Scsi_Host_Template *) in2000__INIT;
+static int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int in2000_abort(Scsi_Cmnd *);
+static void in2000_setup(char *, int *) in2000__INIT;
+static int in2000_proc_info(char *, char **, off_t, int, int, int);
+static int in2000_biosparam(struct scsi_disk *, struct block_device *, int *);
+static int in2000_host_reset(Scsi_Cmnd *);
+static int in2000_bus_reset(Scsi_Cmnd *);
+static int in2000_device_reset(Scsi_Cmnd *);
 
 
 #define IN2000_CAN_Q    16
@@ -411,19 +413,21 @@ int in2000_reset(Scsi_Cmnd *, unsigned int);
 #define IN2000_CPL      2
 #define IN2000_HOST_ID  7
 
-#define IN2000 {  proc_name:       "in2000",		/* name of /proc/scsi directory entry */ \
-                  proc_info:       in2000_proc_info,    /* pointer to proc info function */ \
-                  name:            "Always IN2000",     /* device name */ \
-                  detect:          in2000_detect,       /* returns number of in2000's found */ \
-                  queuecommand:    in2000_queuecommand, /* queue scsi command, don't wait */ \
-                  abort:           in2000_abort,        /* abort current command */ \
-                  reset:           in2000_reset,        /* reset scsi bus */ \
-                  bios_param:      in2000_biosparam,    /* figures out BIOS parameters for lilo, etc */ \
-                  can_queue:       IN2000_CAN_Q,        /* max commands we can queue up */ \
-                  this_id:         IN2000_HOST_ID,      /* host-adapter scsi id */ \
-                  sg_tablesize:    IN2000_SG,           /* scatter-gather table size */ \
-                  cmd_per_lun:     IN2000_CPL,          /* commands per lun */ \
-                  use_clustering:  DISABLE_CLUSTERING,  /* ENABLE_CLUSTERING may speed things up */ \
+#define IN2000 {  proc_name:       		"in2000",	     /* name of /proc/scsi directory entry */ \
+                  proc_info:       		in2000_proc_info,    /* pointer to proc info function */ \
+                  name:            		"Always IN2000",     /* device name */ \
+                  detect:          		in2000_detect,       /* returns number of in2000's found */ \
+                  queuecommand:    		in2000_queuecommand, /* queue scsi command, don't wait */ \
+                  eh_abort_handler:		in2000_abort,        /* abort current command */ \
+                  eh_bus_reset_handler:		in2000_bus_reset,    /* reset scsi bus */ \
+                  eh_device_reset_handler:	in2000_device_reset, /* reset scsi device */ \
+                  eh_host_reset_handler:	in2000_host_reset,   /* reset scsi hba */ \
+                  bios_param:      		in2000_biosparam,    /* figures out BIOS parameters for lilo, etc */ \
+                  can_queue:       		IN2000_CAN_Q,        /* max commands we can queue up */ \
+                  this_id:         		IN2000_HOST_ID,      /* host-adapter scsi id */ \
+                  sg_tablesize:    		IN2000_SG,           /* scatter-gather table size */ \
+                  cmd_per_lun:     		IN2000_CPL,          /* commands per lun */ \
+                  use_clustering:  		DISABLE_CLUSTERING,  /* ENABLE_CLUSTERING may speed things up */ \
                 }
 
 #endif /* IN2000_H */

drivers/scsi/ips.h

 /*****************************************************************************/
-/* ips.h -- driver for the IBM ServeRAID controller                          */
+/* ips.h -- driver for the Adaptec / IBM ServeRAID controller                */
 /*                                                                           */
 /* Written By: Keith Mitchell, IBM Corporation                               */
+/*             Jack Hammer, Adaptec, Inc.                                    */
+/*             David Jeffery, Adaptec, Inc.                                  */
 /*                                                                           */
 /* Copyright (C) 1999 IBM Corporation                                        */
+/* Copyright (C) 2003 Adaptec, Inc.                                          */ 
 /*                                                                           */
 /* This program is free software; you can redistribute it and/or modify      */
 /* it under the terms of the GNU General Public License as published by      */
@@ -40,7 +43,7 @@
 /* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
 /*                                                                           */
 /* Bugs/Comments/Suggestions should be mailed to:                            */
-/*      ipslinux@us.ibm.com                                                  */
+/*      ipslinux@adaptec.com                                                 */
 /*                                                                           */
 /*****************************************************************************/
 
@@ -84,32 +87,10 @@
                                          ((IPS_IS_TROMBONE(ha) || IPS_IS_CLARINET(ha)) && \
                                           (ips_force_memio))) ? 1 : 0)
 
-   #ifndef VIRT_TO_BUS
-      #define VIRT_TO_BUS(x)           (uint32_t) virt_to_bus((void *) x)
-   #endif
-
    #ifndef MDELAY
       #define MDELAY mdelay
    #endif
-
-   #ifndef verify_area_20
-      #define verify_area_20(t,a,sz)   (0) /* success */
-   #endif
-
-   #ifndef DECLARE_MUTEX_LOCKED
-      #define DECLARE_MUTEX_LOCKED(sem) struct semaphore sem = MUTEX_LOCKED;
-   #endif
    
-   /*
-    * Lock macros
-    */
-   #define IPS_SCB_LOCK(cpu_flags)      spin_lock_irqsave(&ha->scb_lock, cpu_flags)
-   #define IPS_SCB_UNLOCK(cpu_flags)    spin_unlock_irqrestore(&ha->scb_lock, cpu_flags)
-   #define IPS_QUEUE_LOCK(queue)        spin_lock_irqsave(&(queue)->lock, (queue)->cpu_flags)
-   #define IPS_QUEUE_UNLOCK(queue)      spin_unlock_irqrestore(&(queue)->lock, (queue)->cpu_flags)
-   #define IPS_HA_LOCK(cpu_flags)       spin_lock_irqsave(&ha->ips_lock, cpu_flags)
-   #define IPS_HA_UNLOCK(cpu_flags)     spin_unlock_irqrestore(&ha->ips_lock, cpu_flags)
-
    /*
     * Adapter address map equates
     */
@@ -1063,8 +1044,6 @@ typedef struct ips_scb_queue {
    struct ips_scb *head;
    struct ips_scb *tail;
    int             count;
-   unsigned long   cpu_flags;
-   spinlock_t      lock;
 } ips_scb_queue_t;
 
 /*
@@ -1074,13 +1053,10 @@ typedef struct ips_wait_queue {
    Scsi_Cmnd      *head;
    Scsi_Cmnd      *tail;
    int             count;
-   unsigned long   cpu_flags;
-   spinlock_t      lock;
 } ips_wait_queue_t;
 
 typedef struct ips_copp_wait_item {
    Scsi_Cmnd                 *scsi_cmd;
-   struct semaphore          *sem;
    struct ips_copp_wait_item *next;
 } ips_copp_wait_item_t;
 
@@ -1088,8 +1064,6 @@ typedef struct ips_copp_queue {
    struct ips_copp_wait_item *head;
    struct ips_copp_wait_item *tail;
    int                        count;
-   unsigned long              cpu_flags;
-   spinlock_t                 lock;
 } ips_copp_queue_t;
 
 /* forward decl for host structure */
@@ -1138,7 +1112,6 @@ typedef struct ips_ha {
    char              *ioctl_data;         /* IOCTL data area            */
    uint32_t           ioctl_datasize;     /* IOCTL data size            */
    uint32_t           cmd_in_progress;    /* Current command in progress*/
-   unsigned long      flags;              /* HA flags                   */
    uint8_t            waitflag;           /* are we waiting for cmd     */
    uint8_t            active;
    int                ioctl_reset;        /* IOCTL Requested Reset Flag */
@@ -1158,11 +1131,6 @@ typedef struct ips_ha {
    char              *ioremap_ptr;        /* ioremapped memory pointer  */
    ips_hw_func_t      func;               /* hw function pointers       */
    struct pci_dev    *pcidev;             /* PCI device handle          */
-   spinlock_t         scb_lock;
-   spinlock_t         copp_lock;
-   spinlock_t         ips_lock;
-   struct semaphore   ioctl_sem;          /* Semaphore for new IOCTL's  */
-   struct semaphore   flash_ioctl_sem;    /* Semaphore for Flashing     */
    char              *flash_data;         /* Save Area for flash data   */
    u8                 flash_order;        /* Save Area for flash size order  */
    u32                flash_datasize;   /* Save Area for flash data size */
@@ -1195,7 +1163,6 @@ typedef struct ips_scb {
    Scsi_Cmnd        *scsi_cmd;
    struct ips_scb   *q_next;
    ips_scb_callback  callback;
-   struct semaphore *sem;
    uint32_t          sg_busaddr;
    int               sg_count;
 } ips_scb_t;

drivers/scsi/wd7000.h

@@ -13,16 +13,16 @@
 
 #include <linux/types.h>
 
-static int wd7000_set_info (char *buffer, int length, struct Scsi_Host *host);
-static int wd7000_proc_info (char *buffer, char **start, off_t offset, int length, int hostno, int inout);
-static int wd7000_detect (Scsi_Host_Template *);
-static int wd7000_command (Scsi_Cmnd *);
-static int wd7000_queuecommand (Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-static int wd7000_abort (Scsi_Cmnd *);
-static int wd7000_bus_reset (Scsi_Cmnd *);
-static int wd7000_host_reset (Scsi_Cmnd *);
-static int wd7000_device_reset (Scsi_Cmnd *);
-static int wd7000_biosparam (Disk *, struct block_device *, int *);
+static int wd7000_set_info(char *buffer, int length, struct Scsi_Host *host);
+static int wd7000_proc_info(char *buffer, char **start, off_t offset, int length, int hostno, int inout);
+static int wd7000_detect(Scsi_Host_Template *);
+static int wd7000_command(Scsi_Cmnd *);
+static int wd7000_queuecommand(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int wd7000_abort(Scsi_Cmnd *);
+static int wd7000_bus_reset(Scsi_Cmnd *);
+static int wd7000_host_reset(Scsi_Cmnd *);
+static int wd7000_device_reset(Scsi_Cmnd *);
+static int wd7000_biosparam(Disk *, struct block_device *, int *);
 
 #ifndef NULL
 #define NULL 0L

include/asm-alpha/pal.h

@@ -45,7 +45,7 @@
 #define PAL_wrperfmon	57
 #define PAL_rdusp	58
 #define PAL_whami	60
-#define PAL_rtsys	61
+#define PAL_retsys	61
 #define PAL_rti		63
 
 #endif /* __ALPHA_PAL_H */

include/asm-alpha/unistd.h

@@ -331,19 +331,19 @@
 #define __NR_removexattr		391
 #define __NR_lremovexattr		392
 #define __NR_fremovexattr		393
-#define __NR_futex		394
-#define __NR_sched_setaffinity	395     
-#define __NR_sched_getaffinity	396
-#define __NR_tuxcall		397
-#define __NR_io_setup		398
-#define __NR_io_destroy		399
-#define __NR_io_getevents	400
-#define __NR_io_submit		401
-#define __NR_io_cancel		402
-#define __NR_alloc_hugepages	403
-#define __NR_free_hugepages	404
-#define __NR_exit_group		405
-
+#define __NR_futex			394
+#define __NR_sched_setaffinity		395     
+#define __NR_sched_getaffinity		396
+#define __NR_tuxcall			397
+#define __NR_io_setup			398
+#define __NR_io_destroy			399
+#define __NR_io_getevents		400
+#define __NR_io_submit			401
+#define __NR_io_cancel			402
+#define __NR_alloc_hugepages		403
+#define __NR_free_hugepages		404
+#define __NR_exit_group			405
+#define NR_SYSCALLS			406
 
 #if defined(__GNUC__)
 
@@ -598,7 +598,7 @@ static inline pid_t waitpid(int pid, int * wait_stat, int flags)
 	return sys_wait4(pid, wait_stat, flags, NULL);
 }
 
-#endif
+#endif /* __KERNEL_SYSCALLS__ */
 
 /*
  * "Conditional" syscalls

include/asm-generic/siginfo.h

@@ -91,7 +91,7 @@ typedef struct siginfo {
 #define __SI_FAULT	(3 << 16)
 #define __SI_CHLD	(4 << 16)
 #define __SI_RT		(5 << 16)
-#define __SI_CODE(T,N)	((T) << 16 | ((N) & 0xffff))
+#define __SI_CODE(T,N)	((T) | ((N) & 0xffff))
 #else
 #define __SI_KILL	0
 #define __SI_TIMER	0

include/linux/ide.h

@@ -794,6 +794,7 @@ typedef struct ide_drive_s {
 	int		lun;		/* logical unit */
 	int		crc_count;	/* crc counter to reduce drive speed */
 	struct list_head list;
+	struct device	gendev;
 	struct gendisk *disk;
 } ide_drive_t;
 
@@ -1199,6 +1200,7 @@ typedef struct ide_driver_s {
 	int		(*attach)(ide_drive_t *);
 	void		(*ata_prebuilder)(ide_drive_t *);
 	void		(*atapi_prebuilder)(ide_drive_t *);
+	struct device_driver	gen_driver;
 	struct list_head drives;
 	struct list_head drivers;
 } ide_driver_t;

kernel/timer.c

@@ -798,10 +798,18 @@ asmlinkage unsigned long sys_alarm(unsigned int seconds)
  * The Alpha uses getxpid, getxuid, and getxgid instead.  Maybe this
  * should be moved into arch/i386 instead?
  */
- 
+
+/**
+ * sys_getpid - return the thread group id of the current process
+ *
+ * Note, despite the name, this returns the tgid not the pid.  The tgid and
+ * the pid are identical unless CLONE_THREAD was specified on clone() in
+ * which case the tgid is the same in all threads of the same group.
+ *
+ * This is SMP safe as current->tgid does not change.
+ */
 asmlinkage long sys_getpid(void)
 {
-	/* This is SMP safe - current->pid doesn't change */
 	return current->tgid;
 }
 

lib/brlock.c

@@ -24,8 +24,9 @@ void __br_write_lock (enum brlock_indices idx)
 {
 	int i;
 
+	preempt_disable();
 	for (i = 0; i < NR_CPUS; i++)
-		write_lock(&__brlock_array[i][idx]);
+		_raw_write_lock(&__brlock_array[i][idx]);
 }
 
 void __br_write_unlock (enum brlock_indices idx)
@@ -33,7 +34,8 @@ void __br_write_unlock (enum brlock_indices idx)
 	int i;
 
 	for (i = 0; i < NR_CPUS; i++)
-		write_unlock(&__brlock_array[i][idx]);
+		_raw_write_unlock(&__brlock_array[i][idx]);
+	preempt_enable();
 }
 
 #else /* ! __BRLOCK_USE_ATOMICS */
@@ -48,11 +50,12 @@ void __br_write_lock (enum brlock_indices idx)
 {
 	int i;
 
+	preempt_disable();
 again:
-	spin_lock(&__br_write_locks[idx].lock);
+	_raw_spin_lock(&__br_write_locks[idx].lock);
 	for (i = 0; i < NR_CPUS; i++)
 		if (__brlock_array[i][idx] != 0) {
-			spin_unlock(&__br_write_locks[idx].lock);
+			_raw_spin_unlock(&__br_write_locks[idx].lock);
 			barrier();
 			cpu_relax();
 			goto again;