ARM: tegra: add DT entry for nct1008 to Dalmore

Enable thermal sensor nct1008 for Tegra114 dalmore.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -739,6 +739,14 @@ rt5640: rt5640 {
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&palmas_ldo6_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 
 	i2c@7000d000 {
@@ -948,7 +956,7 @@ ldo4 {
 						regulator-max-microvolt = <1800000>;
 					};
 
-					ldo6 {
+					palmas_ldo6_reg: ldo6 {
 						regulator-name = "vdd-sensor-2v85";
 						regulator-min-microvolt = <2850000>;
 						regulator-max-microvolt = <2850000>;