Merge branch 'cpuidle-arm' into pm-cpuidle

* cpuidle-arm:
  ARM: ux500: cpuidle: Move ux500 cpuidle driver to drivers/cpuidle
  ARM: ux500: cpuidle: Remove pointless include
  ARM: ux500: cpuidle: Instantiate the driver from platform device
  ARM: davinci: cpuidle: Fix target residency
  cpuidle: Add Kconfig.arm and move calxeda, kirkwood and zynq

arch/arm/mach-davinci/cpuidle.c

@@ -65,7 +65,7 @@ static struct cpuidle_driver davinci_idle_driver = {
 	.states[1]		= {
 		.enter			= davinci_enter_idle,
 		.exit_latency		= 10,
-		.target_residency	= 100000,
+		.target_residency	= 10000,
 		.flags			= CPUIDLE_FLAG_TIME_VALID,
 		.name			= "DDR SR",
 		.desc			= "WFI and DDR Self Refresh",

arch/arm/mach-ux500/Makefile

@@ -4,7 +4,6 @@
 
 obj-y				:= cpu.o devices.o devices-common.o \
 				   id.o usb.o timer.o pm.o
-obj-$(CONFIG_CPU_IDLE)          += cpuidle.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \

drivers/cpuidle/Kconfig

+menu "CPU Idle"
 
-menuconfig CPU_IDLE
+config CPU_IDLE
 	bool "CPU idle PM support"
 	default y if ACPI || PPC_PSERIES
 	select CPU_IDLE_GOV_LADDER if (!NO_HZ && !NO_HZ_IDLE)
@@ -29,20 +30,13 @@ config CPU_IDLE_GOV_MENU
 	bool "Menu governor (for tickless system)"
 	default y
 
-config CPU_IDLE_CALXEDA
-	bool "CPU Idle Driver for Calxeda processors"
-	depends on ARCH_HIGHBANK
-	select ARM_CPU_SUSPEND
-	help
-	  Select this to enable cpuidle on Calxeda processors.
-
-config CPU_IDLE_ZYNQ
-	bool "CPU Idle Driver for Xilinx Zynq processors"
-	depends on ARCH_ZYNQ
-	help
-	  Select this to enable cpuidle on Xilinx Zynq processors.
+menu "ARM CPU Idle Drivers"
+depends on ARM
+source "drivers/cpuidle/Kconfig.arm"
+endmenu
 
 endif
 
 config ARCH_NEEDS_CPU_IDLE_COUPLED
 	def_bool n
+endmenu

drivers/cpuidle/Kconfig.arm

+#
+# ARM CPU Idle drivers
+#
+
+config ARM_HIGHBANK_CPUIDLE
+	bool "CPU Idle Driver for Calxeda processors"
+	depends on ARCH_HIGHBANK
+	select ARM_CPU_SUSPEND
+	help
+	  Select this to enable cpuidle on Calxeda processors.
+
+config ARM_KIRKWOOD_CPUIDLE
+	bool "CPU Idle Driver for Marvell Kirkwood SoCs"
+	depends on ARCH_KIRKWOOD
+	help
+	  This adds the CPU Idle driver for Marvell Kirkwood SoCs.
+
+config ARM_ZYNQ_CPUIDLE
+	bool "CPU Idle Driver for Xilinx Zynq processors"
+	depends on ARCH_ZYNQ
+	help
+	  Select this to enable cpuidle on Xilinx Zynq processors.
+
+config ARM_U8500_CPUIDLE
+	bool "Cpu Idle Driver for the ST-E u8500 processors"
+	depends on ARCH_U8500
+	help
+	  Select this to enable cpuidle for ST-E u8500 processors
+

drivers/cpuidle/Makefile

@@ -5,6 +5,9 @@
 obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
 obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
 
-obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
-obj-$(CONFIG_ARCH_KIRKWOOD) += cpuidle-kirkwood.o
-obj-$(CONFIG_CPU_IDLE_ZYNQ) += cpuidle-zynq.o
+##################################################################################
+# ARM SoC drivers
+obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE)	+= cpuidle-calxeda.o
+obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE)	+= cpuidle-kirkwood.o
+obj-$(CONFIG_ARM_ZYNQ_CPUIDLE)		+= cpuidle-zynq.o
+obj-$(CONFIG_ARM_U8500_CPUIDLE)         += cpuidle-ux500.o

arch/arm/mach-ux500/cpuidle.c → drivers/cpuidle/cpuidle-ux500.c

@@ -16,13 +16,11 @@
 #include <linux/smp.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/platform_data/arm-ux500-pm.h>
+#include <linux/platform_device.h>
 
 #include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
 
-#include "db8500-regs.h"
-#include "id.h"
-
 static atomic_t master = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(master_lock);
 
@@ -113,11 +111,8 @@ static struct cpuidle_driver ux500_idle_driver = {
 	.state_count = 2,
 };
 
-int __init ux500_idle_init(void)
+static int __init dbx500_cpuidle_probe(struct platform_device *pdev)
 {
-	if (!(cpu_is_u8500_family() || cpu_is_ux540_family()))
-		return -ENODEV;
-
 	/* Configure wake up reasons */
 	prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
 			     PRCMU_WAKEUP(ABB));
@@ -125,4 +120,12 @@ int __init ux500_idle_init(void)
 	return cpuidle_register(&ux500_idle_driver, NULL);
 }
 
-device_initcall(ux500_idle_init);
+static struct platform_driver dbx500_cpuidle_plat_driver = {
+	.driver = {
+		.name = "cpuidle-dbx500",
+		.owner = THIS_MODULE,
+	},
+	.probe = dbx500_cpuidle_probe,
+};
+
+module_platform_driver(dbx500_cpuidle_plat_driver);

drivers/mfd/db8500-prcmu.c

@@ -3093,6 +3093,10 @@ static struct mfd_cell db8500_prcmu_devs[] = {
 		.platform_data = &db8500_cpufreq_table,
 		.pdata_size = sizeof(db8500_cpufreq_table),
 	},
+	{
+		.name = "cpuidle-dbx500",
+		.of_compatible = "stericsson,cpuidle-dbx500",
+	},
 	{
 		.name = "db8500-thermal",
 		.num_resources = ARRAY_SIZE(db8500_thsens_resources),