be2net: Move the Emulex driver

Moves the Emulex driver into drivers/net/ethernet/emulex/ and
make the necessary Kconfig and Makefile changes.

CC: Sathya Perla <sathya.perla@emulex.com>
CC: Subbu Seetharaman <subbu.seetharaman@emulex.com>
CC: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

MAINTAINERS

@@ -5746,7 +5746,7 @@ M:	Ajit Khaparde <ajit.khaparde@emulex.com>
 L:	netdev@vger.kernel.org
 W:	http://www.emulex.com
 S:	Supported
-F:	drivers/net/benet/
+F:	drivers/net/ethernet/emulex/benet/
 
 SFC NETWORK DRIVER
 M:	Solarflare linux maintainers <linux-net-drivers@solarflare.com>

drivers/net/Kconfig

@@ -1598,8 +1598,6 @@ config BNA
 
 	  <http://support.brocade.com>
 
-source "drivers/net/benet/Kconfig"
-
 endif # NETDEV_10000
 
 source "drivers/net/tokenring/Kconfig"

drivers/net/Makefile

@@ -24,7 +24,6 @@ obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
 obj-$(CONFIG_TEHUTI) += tehuti.o
 obj-$(CONFIG_ENIC) += enic/
 obj-$(CONFIG_JME) += jme.o
-obj-$(CONFIG_BE2NET) += benet/
 obj-$(CONFIG_VMXNET3) += vmxnet3/
 obj-$(CONFIG_BNA) += bna/
 

drivers/net/ethernet/Kconfig

@@ -16,6 +16,7 @@ source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/emulex/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"

drivers/net/ethernet/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_NET_VENDOR_8390) += 8390/
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/

drivers/net/ethernet/emulex/Kconfig

+#
+# Emulex driver configuration
+#
+
+config NET_VENDOR_EMULEX
+	bool "Emulex devices"
+	depends on PCI && INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Emulex cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_EMULEX
+
+source "drivers/net/ethernet/emulex/benet/Kconfig"
+
+endif # NET_VENDOR_EMULEX

drivers/net/ethernet/emulex/Makefile

+#
+# Makefile for the Emulex device drivers.
+#
+
+obj-$(CONFIG_BE2NET) += benet/

drivers/net/benet/Kconfig → drivers/net/ethernet/emulex/benet/Kconfig

 config BE2NET
 	tristate "ServerEngines' 10Gbps NIC - BladeEngine"
 	depends on PCI && INET
-	help
+	---help---
 	  This driver implements the NIC functionality for ServerEngines'
 	  10Gbps network adapter - BladeEngine.