Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-10-30

This series contains updates to e1000, igb and ixgbe.

Francesco Ruggeri fixes an issue with e1000 where in a VM the driver did
not support unicast filtering.

Roman Gushchin fixes an issue with igb where the driver was re-using
mapped pages so that packets were still getting dropped even if all
the memory issues are gone and there is free memory.

Junwei Zhang found where in the ixgbe_clean_rx_ring() we were repeating
the assignment of NULL to the receive buffer skb and fixes it.

Emil fixes a race condition between setup_link and SFP detection routine
in the watchdog when setting the advertised speed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/e1000/e1000_main.c

@@ -1075,7 +1075,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 				  NETIF_F_HW_CSUM |
 				  NETIF_F_SG);
 
-	netdev->priv_flags |= IFF_UNICAST_FLT;
+	/* Do not set IFF_UNICAST_FLT for VMWare's 82545EM */
+	if (hw->device_id != E1000_DEV_ID_82545EM_COPPER ||
+	    hw->subsystem_vendor_id != PCI_VENDOR_ID_VMWARE)
+		netdev->priv_flags |= IFF_UNICAST_FLT;
 
 	adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
 

drivers/net/ethernet/intel/igb/igb_main.c

@@ -6537,6 +6537,9 @@ static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
 	if (unlikely(page_to_nid(page) != numa_node_id()))
 		return false;
 
+	if (unlikely(page->pfmemalloc))
+		return false;
+
 #if (PAGE_SIZE < 8192)
 	/* if we are only owner of page we can reuse it */
 	if (unlikely(page_count(page) != 1))
@@ -6603,7 +6606,8 @@ static bool igb_add_rx_frag(struct igb_ring *rx_ring,
 		memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
 
 		/* we can reuse buffer as-is, just make sure it is local */
-		if (likely(page_to_nid(page) == numa_node_id()))
+		if (likely((page_to_nid(page) == numa_node_id()) &&
+			   !page->pfmemalloc))
 			return true;
 
 		/* this page cannot be reused so discard it */

drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

@@ -342,12 +342,16 @@ static int ixgbe_set_settings(struct net_device *netdev,
 		if (old == advertised)
 			return err;
 		/* this sets the link speed and restarts auto-neg */
+		while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+			usleep_range(1000, 2000);
+
 		hw->mac.autotry_restart = true;
 		err = hw->mac.ops.setup_link(hw, advertised, true);
 		if (err) {
 			e_info(probe, "setup link failed with code %d\n", err);
 			hw->mac.ops.setup_link(hw, old, true);
 		}
+		clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
 	} else {
 		/* in this case we currently only support 10Gb/FULL */
 		u32 speed = ethtool_cmd_speed(ecmd);

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -4321,8 +4321,8 @@ static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring)
 				IXGBE_CB(skb)->page_released = false;
 			}
 			dev_kfree_skb(skb);
+			rx_buffer->skb = NULL;
 		}
-		rx_buffer->skb = NULL;
 		if (rx_buffer->dma)
 			dma_unmap_page(dev, rx_buffer->dma,
 				       ixgbe_rx_pg_size(rx_ring),