drm/nouveau/secboot/gm200: add secure-boot support

Add secure-boot for the dGPU set of GM20X chips, using the PMU as the
high-secure falcon.

This work is based on Deepak Goyal's initial port of Secure Boot to
Nouveau.

v2. use proper memory target function
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drivers/gpu/drm/nouveau/include/nvkm/subdev/secboot.h

@@ -53,4 +53,6 @@ bool nvkm_secboot_is_managed(struct nvkm_secboot *, enum nvkm_secboot_falcon);
 int nvkm_secboot_reset(struct nvkm_secboot *, u32 falcon);
 int nvkm_secboot_start(struct nvkm_secboot *, u32 falcon);
 
+int gm200_secboot_new(struct nvkm_device *, int, struct nvkm_secboot **);
+
 #endif

drivers/gpu/drm/nouveau/nvkm/engine/device/base.c

@@ -1981,6 +1981,7 @@ nv120_chipset = {
 	.mxm = nv50_mxm_new,
 	.pci = gk104_pci_new,
 	.pmu = gm107_pmu_new,
+	.secboot = gm200_secboot_new,
 	.timer = gk20a_timer_new,
 	.volt = gk104_volt_new,
 	.ce[0] = gm200_ce_new,
@@ -2012,6 +2013,7 @@ nv124_chipset = {
 	.mxm = nv50_mxm_new,
 	.pci = gk104_pci_new,
 	.pmu = gm107_pmu_new,
+	.secboot = gm200_secboot_new,
 	.timer = gk20a_timer_new,
 	.volt = gk104_volt_new,
 	.ce[0] = gm200_ce_new,
@@ -2043,6 +2045,7 @@ nv126_chipset = {
 	.mxm = nv50_mxm_new,
 	.pci = gk104_pci_new,
 	.pmu = gm107_pmu_new,
+	.secboot = gm200_secboot_new,
 	.timer = gk20a_timer_new,
 	.volt = gk104_volt_new,
 	.ce[0] = gm200_ce_new,

drivers/gpu/drm/nouveau/nvkm/engine/gr/gm200.c

@@ -231,12 +231,6 @@ gm200_gr_data[] = {
  * PGRAPH engine/subdev functions
  ******************************************************************************/
 
-static int
-gm200_gr_init_ctxctl(struct gf100_gr *gr)
-{
-	return 0;
-}
-
 int
 gm200_gr_init(struct gf100_gr *gr)
 {
@@ -350,7 +344,7 @@ gm200_gr_init(struct gf100_gr *gr)
 
 	gf100_gr_zbc_init(gr);
 
-	return gm200_gr_init_ctxctl(gr);
+	return gf100_gr_init_ctxctl(gr);
 }
 
 int

drivers/gpu/drm/nouveau/nvkm/subdev/secboot/Kbuild

 nvkm-y += nvkm/subdev/secboot/base.o
+nvkm-y += nvkm/subdev/secboot/gm200.o

drivers/gpu/drm/nouveau/nvkm/subdev/secboot/priv.h

@@ -45,4 +45,182 @@ int nvkm_secboot_ctor(const struct nvkm_secboot_func *, struct nvkm_device *,
 int nvkm_secboot_falcon_reset(struct nvkm_secboot *);
 int nvkm_secboot_falcon_run(struct nvkm_secboot *);
 
+struct flcn_u64 {
+	u32 lo;
+	u32 hi;
+};
+static inline u64 flcn64_to_u64(const struct flcn_u64 f)
+{
+	return ((u64)f.hi) << 32 | f.lo;
+}
+
+/**
+ * struct gm200_flcn_bl_desc - DMEM bootloader descriptor
+ * @signature:		16B signature for secure code. 0s if no secure code
+ * @ctx_dma:		DMA context to be used by BL while loading code/data
+ * @code_dma_base:	256B-aligned Physical FB Address where code is located
+ *			(falcon's $xcbase register)
+ * @non_sec_code_off:	offset from code_dma_base where the non-secure code is
+ *                      located. The offset must be multiple of 256 to help perf
+ * @non_sec_code_size:	the size of the nonSecure code part.
+ * @sec_code_off:	offset from code_dma_base where the secure code is
+ *                      located. The offset must be multiple of 256 to help perf
+ * @sec_code_size:	offset from code_dma_base where the secure code is
+ *                      located. The offset must be multiple of 256 to help perf
+ * @code_entry_point:	code entry point which will be invoked by BL after
+ *                      code is loaded.
+ * @data_dma_base:	256B aligned Physical FB Address where data is located.
+ *			(falcon's $xdbase register)
+ * @data_size:		size of data block. Should be multiple of 256B
+ *
+ * Structure used by the bootloader to load the rest of the code. This has
+ * to be filled by host and copied into DMEM at offset provided in the
+ * hsflcn_bl_desc.bl_desc_dmem_load_off.
+ */
+struct gm200_flcn_bl_desc {
+	u32 reserved[4];
+	u32 signature[4];
+	u32 ctx_dma;
+	struct flcn_u64 code_dma_base;
+	u32 non_sec_code_off;
+	u32 non_sec_code_size;
+	u32 sec_code_off;
+	u32 sec_code_size;
+	u32 code_entry_point;
+	struct flcn_u64 data_dma_base;
+	u32 data_size;
+};
+
+/**
+ * struct hsflcn_acr_desc - data section of the HS firmware
+ *
+ * This header is to be copied at the beginning of DMEM by the HS bootloader.
+ *
+ * @signature:		signature of ACR ucode
+ * @wpr_region_id:	region ID holding the WPR header and its details
+ * @wpr_offset:		offset from the WPR region holding the wpr header
+ * @regions:		region descriptors
+ * @nonwpr_ucode_blob_size:	size of LS blob
+ * @nonwpr_ucode_blob_start:	FB location of LS blob is
+ */
+struct hsflcn_acr_desc {
+	union {
+		u8 reserved_dmem[0x200];
+		u32 signatures[4];
+	} ucode_reserved_space;
+	u32 wpr_region_id;
+	u32 wpr_offset;
+	u32 mmu_mem_range;
+#define FLCN_ACR_MAX_REGIONS 2
+	struct {
+		u32 no_regions;
+		struct {
+			u32 start_addr;
+			u32 end_addr;
+			u32 region_id;
+			u32 read_mask;
+			u32 write_mask;
+			u32 client_mask;
+		} region_props[FLCN_ACR_MAX_REGIONS];
+	} regions;
+	u32 ucode_blob_size;
+	u64 ucode_blob_base __aligned(8);
+	struct {
+		u32 vpr_enabled;
+		u32 vpr_start;
+		u32 vpr_end;
+		u32 hdcp_policies;
+	} vpr_desc;
+};
+
+/**
+ * Contains the whole secure boot state, allowing it to be performed as needed
+ * @wpr_addr:		physical address of the WPR region
+ * @wpr_size:		size in bytes of the WPR region
+ * @ls_blob:		LS blob of all the LS firmwares, signatures, bootloaders
+ * @ls_blob_size:	size of the LS blob
+ * @ls_blob_nb_regions:	number of LS firmwares that will be loaded
+ * @acr_blob:		HS blob
+ * @acr_blob_vma:	mapping of the HS blob into the secure falcon's VM
+ * @acr_bl_desc:	bootloader descriptor of the HS blob
+ * @hsbl_blob:		HS blob bootloader
+ * @inst:		instance block for HS falcon
+ * @pgd:		page directory for the HS falcon
+ * @vm:			address space used by the HS falcon
+ * @bl_desc_size:	size of the BL descriptor used by this chip.
+ * @fixup_bl_desc:	hook that generates the proper BL descriptor format from
+ *			the generic GM200 format into a data array of size
+ *			bl_desc_size
+ */
+struct gm200_secboot {
+	struct nvkm_secboot base;
+	const struct gm200_secboot_func *func;
+
+	/*
+	 * Address and size of the WPR region. On dGPU this will be the
+	 * address of the LS blob. On Tegra this is a fixed region set by the
+	 * bootloader
+	 */
+	u64 wpr_addr;
+	u32 wpr_size;
+
+	/*
+	 * HS FW - lock WPR region (dGPU only) and load LS FWs
+	 * on Tegra the HS FW copies the LS blob into the fixed WPR instead
+	 */
+	struct nvkm_gpuobj *acr_load_blob;
+	struct gm200_flcn_bl_desc acr_load_bl_desc;
+
+	/* HS FW - unlock WPR region (dGPU only) */
+	struct nvkm_gpuobj *acr_unload_blob;
+	struct gm200_flcn_bl_desc acr_unload_bl_desc;
+
+	/* HS bootloader */
+	void *hsbl_blob;
+
+	/* LS FWs, to be loaded by the HS ACR */
+	struct nvkm_gpuobj *ls_blob;
+
+	/* Instance block & address space used for HS FW execution */
+	struct nvkm_gpuobj *inst;
+	struct nvkm_gpuobj *pgd;
+	struct nvkm_vm *vm;
+
+	/* To keep track of the state of all managed falcons */
+	enum {
+		/* In non-secure state, no firmware loaded, no privileges*/
+		NON_SECURE = 0,
+		/* In low-secure mode and ready to be started */
+		RESET,
+		/* In low-secure mode and running */
+		RUNNING,
+	} falcon_state[NVKM_SECBOOT_FALCON_END];
+
+};
+#define gm200_secboot(sb) container_of(sb, struct gm200_secboot, base)
+
+struct gm200_secboot_func {
+	/*
+	 * Size of the bootloader descriptor for this chip. A block of this
+	 * size is allocated before booting a falcon and the fixup_bl_desc
+	 * callback is called on it
+	 */
+	u32 bl_desc_size;
+	void (*fixup_bl_desc)(const struct gm200_flcn_bl_desc *, void *);
+
+	/*
+	 * Chip-specific modifications of the HS descriptor can be done here.
+	 * On dGPU this is used to fill the information about the WPR region
+	 * we want the HS FW to set up.
+	 */
+	void (*fixup_hs_desc)(struct gm200_secboot *, struct hsflcn_acr_desc *);
+};
+
+int gm200_secboot_init(struct nvkm_secboot *);
+void *gm200_secboot_dtor(struct nvkm_secboot *);
+int gm200_secboot_reset(struct nvkm_secboot *, u32);
+int gm200_secboot_start(struct nvkm_secboot *, u32);
+
+int gm20x_secboot_prepare_blobs(struct gm200_secboot *);
+
 #endif