[PATCH] cyclades async driver update

This patch is the first of several planned fixes for the cyclades
multiserial cards driver.

Its mostly a sync with in-house driver:

- Prevent users from opening non-existing Z ports
- Implement special XON/XOFF character handling in Z cards
- Prevent data-loss on Z cards
- Throttling fix for Z card
- Only throttle if CTS/RTS are set
- Fix accounting of received data

Kudos to Cyclades R&D

drivers/char/cyclades.c

@@ -2,7 +2,7 @@
 #define	Z_WAKE
 #undef	Z_EXT_CHARS_IN_BUFFER
 static char rcsid[] =
-"$Revision: 2.3.2.8 $$Date: 2000/07/06 18:14:16 $";
+"$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $";
 
 /*
  *  linux/drivers/char/cyclades.c
@@ -12,7 +12,7 @@ static char rcsid[] =
  *
  * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
  * Modified and maintained by Marcio Saito <marcio@cyclades.com>.
- * Currently maintained by Henrique Gobbi <henrique.gobbi@cyclades.com>.
+ * Currently maintained by Cyclades team <async@cyclades.com>.
  *
  * For Technical support and installation problems, please send e-mail
  * to support@cyclades.com.
@@ -25,6 +25,8 @@ static char rcsid[] =
  * This version supports shared IRQ's (only for PCI boards).
  *
  * $Log: cyclades.c,v $
+ * Prevent users from opening non-existing Z ports.
+ *
  * Revision 2.3.2.8   2000/07/06 18:14:16 ivan
  * Fixed the PCI detection function to work properly on Alpha systems.
  * Implemented support for TIOCSERGETLSR ioctl.
@@ -676,6 +678,9 @@ static char rcsid[] =
 
 #define cy_put_user	put_user
 
+static void cy_throttle (struct tty_struct *tty);
+static void cy_send_xchar (struct tty_struct *tty, char ch);
+
 static unsigned long 
 cy_get_user(unsigned long *addr)
 {
@@ -1256,8 +1261,6 @@ cyy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
                                info->mon.char_max = char_count;
                             info->mon.char_last = char_count;
 #endif
-			    info->idle_stats.recv_bytes += char_count;
-			    info->idle_stats.recv_idle   = jiffies;
                             while(char_count--){
                                 if (tty->flip.count >= TTY_FLIPBUF_SIZE){
                                         break;
@@ -1266,11 +1269,13 @@ cyy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
                                 data = cy_readb(base_addr+(CyRDSR<<index));
                                 *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
                                 *tty->flip.char_buf_ptr++ = data;
+				info->idle_stats.recv_bytes++;
 				info->icount.rx++;
 #ifdef CY_16Y_HACK
                                 udelay(10L);
 #endif
                             }
+                             info->idle_stats.recv_idle = jiffies;
                         }
                         schedule_delayed_work(&tty->flip.work, 1);
                     }
@@ -1627,9 +1632,12 @@ cyz_handle_rx(struct cyclades_port *info, volatile struct CH_CTRL *ch_ctrl,
 	    }
 #else
 	    while(char_count--){
-		if (tty->flip.count >= TTY_FLIPBUF_SIZE){
+		if (tty->flip.count >= N_TTY_BUF_SIZE - tty->read_cnt)
                     break;
-		}
+
+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+		    break;
+
 		data = cy_readb(cinfo->base_addr + rx_bufaddr + new_rx_get);
 		new_rx_get = (new_rx_get + 1) & (rx_bufsize - 1);
 		tty->flip.count++;
@@ -1768,10 +1776,6 @@ cyz_handle_cmd(struct cyclades_card *cinfo)
     fw_ver = cy_readl(&board_ctrl->fw_version);
     hw_ver = cy_readl(&((struct RUNTIME_9060 *)(cinfo->ctl_addr))->mail_box_0);
 
-#ifdef CONFIG_CYZ_INTR
-    if (!cinfo->nports)
-	cinfo->nports = (int) cy_readl(&board_ctrl->n_channel);
-#endif
 
     while(cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
 	special_count = 0;
@@ -1958,6 +1962,7 @@ cyz_poll(unsigned long arg)
 	    ch_ctrl = &(zfw_ctrl->ch_ctrl[port]);
 	    buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
 
+	    if (!info->throttle)
 	        cyz_handle_rx(info, ch_ctrl, buf_ctrl);
 	    cyz_handle_tx(info, ch_ctrl, buf_ctrl);
 	}
@@ -2553,12 +2558,15 @@ cy_open(struct tty_struct *tty, struct file * filp)
        will make the user pay attention.
     */
     if (IS_CYC_Z(cy_card[info->card])) {
-        if (!ISZLOADED(cy_card[info->card])) {
+	struct cyclades_card *cinfo = &cy_card[info->card];
+	struct FIRM_ID *firm_id = (struct FIRM_ID *)
+        	(cinfo->base_addr + ID_ADDRESS);
+
+        if (!ISZLOADED(*cinfo)) {
 	    if (((ZE_V1 ==cy_readl(&((struct RUNTIME_9060 *)
-		((cy_card[info->card]).ctl_addr))->mail_box_0)) &&
-		Z_FPGA_CHECK(cy_card[info->card])) &&
-		(ZFIRM_HLT==cy_readl(&((struct FIRM_ID *)
-		((cy_card[info->card]).base_addr+ID_ADDRESS))->signature)))
+		(cinfo->ctl_addr))->mail_box_0)) &&
+		Z_FPGA_CHECK (*cinfo)) &&
+		(ZFIRM_HLT == cy_readl (&firm_id->signature)))
 	    {
 		printk ("cyc:Cyclades-Z Error: you need an external power supply for this number of ports.\n\rFirmware halted.\r\n");
 	    } else {
@@ -2571,20 +2579,33 @@ cy_open(struct tty_struct *tty, struct file * filp)
 	    /* In case this Z board is operating in interrupt mode, its 
 	       interrupts should be enabled as soon as the first open happens 
 	       to one of its ports. */
-	    if (!cy_card[info->card].intr_enabled) {
+            if (!cinfo->intr_enabled) {
+		struct ZFW_CTRL *zfw_ctrl;
+		struct BOARD_CTRL *board_ctrl;
+
+		zfw_ctrl = (struct ZFW_CTRL *)
+		 (cinfo->base_addr +
+		  (cy_readl (&firm_id->zfwctrl_addr) & 0xfffff));
+
+		board_ctrl = &zfw_ctrl->board_ctrl;
+
 		/* Enable interrupts on the PLX chip */
-		cy_writew(cy_card[info->card].ctl_addr+0x68,
-			cy_readw(cy_card[info->card].ctl_addr+0x68)|0x0900);
+		cy_writew(cinfo->ctl_addr+0x68,
+			cy_readw(cinfo->ctl_addr+0x68)|0x0900);
 		/* Enable interrupts on the FW */
-		retval = cyz_issue_cmd(&cy_card[info->card], 
+		retval = cyz_issue_cmd(cinfo,
 					0, C_CM_IRQ_ENBL, 0L);
 		if (retval != 0){
 		    printk("cyc:IRQ enable retval was %x\n", retval);
 		}
-		cy_card[info->card].intr_enabled = 1;
+		cinfo->nports = (int) cy_readl (&board_ctrl->n_channel);
+		cinfo->intr_enabled = 1;
 	    }
 	}
 #endif /* CONFIG_CYZ_INTR */
+	/* Make sure this Z port really exists in hardware */
+	if (info->line > (cinfo->first_line + cinfo->nports - 1))
+		return -ENODEV;
     }
 #ifdef CY_DEBUG_OTHER
     printk("cyc:cy_open ttyC%d\n", info->line); /* */
@@ -2639,6 +2660,8 @@ cy_open(struct tty_struct *tty, struct file * filp)
         return retval;
     }
 
+    info->throttle = 0;
+
 #ifdef CY_DEBUG_OPEN
     printk(" cyc:cy_open done\n");/**/
 #endif
@@ -4283,6 +4306,34 @@ cy_set_termios(struct tty_struct *tty, struct termios * old_termios)
     return;
 } /* cy_set_termios */
 
+/* This function is used to send a high-priority XON/XOFF character to
+   the device.
+*/
+static void
+cy_send_xchar (struct tty_struct *tty, char ch)
+{
+	struct cyclades_port *info = (struct cyclades_port *) tty->driver_data;
+	int card, channel;
+
+	if (serial_paranoia_check (info, tty->name, "cy_send_xchar"))
+		return;
+
+  	info->x_char = ch;
+
+	if (ch)
+		cy_start (tty);
+
+	card = info->card;
+	channel = info->line - cy_card[card].first_line;
+
+	if (IS_CYC_Z (cy_card[card])) {
+		if (ch == STOP_CHAR (tty))
+	  		cyz_issue_cmd (&cy_card[card], channel, C_CM_SENDXOFF, 0L);
+		else if (ch == START_CHAR (tty))
+			cyz_issue_cmd (&cy_card[card], channel, C_CM_SENDXON, 0L);
+	}
+}
+
 /* This routine is called by the upper-layer tty layer to signal
    that incoming characters should be throttled because the input
    buffers are close to full.
@@ -4307,12 +4358,16 @@ cy_throttle(struct tty_struct * tty)
             return;
     }
 
+    card = info->card;
+
     if (I_IXOFF(tty)) {
-        info->x_char = STOP_CHAR(tty);
-            /* Should use the "Send Special Character" feature!!! */
+        if (!IS_CYC_Z (cy_card[card]))
+            cy_send_xchar (tty, STOP_CHAR (tty));
+        else
+            info->throttle = 1;
     }
 
-    card = info->card;
+    if (tty->termios->c_cflag & CRTSCTS) {
         channel = info->line - cy_card[card].first_line;
         if (!IS_CYC_Z(cy_card[card])) {
             chip = channel>>2;
@@ -4331,7 +4386,8 @@ cy_throttle(struct tty_struct * tty)
 	     }
 	    CY_UNLOCK(info, flags);
 	} else {
-	// Nothing to do!
+	    info->throttle = 1;
+        }
     }
 
     return;
@@ -4367,10 +4423,10 @@ cy_unthrottle(struct tty_struct * tty)
 	if (info->x_char)
 	    info->x_char = 0;
 	else
-	    info->x_char = START_CHAR(tty);
-            /* Should use the "Send Special Character" feature!!! */
+	    cy_send_xchar (tty, START_CHAR (tty));
     }
 
+    if (tty->termios->c_cflag & CRTSCTS) {
         card = info->card;
         channel = info->line - cy_card[card].first_line;
         if (!IS_CYC_Z(cy_card[card])) {
@@ -4389,8 +4445,9 @@ cy_unthrottle(struct tty_struct * tty)
 		    cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
 	    }
 	    CY_UNLOCK(info, flags);
-    }else{
-	// Nothing to do!
+        } else {
+	    info->throttle = 0;
+	}
     }
 
     return;

include/linux/cyclades.h

@@ -7,6 +7,10 @@
  *
  * This file contains the general definitions for the cyclades.c driver
  *$Log: cyclades.h,v $
+ *Revision 3.1  2002/01/29 11:36:16  henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
  *Revision 3.1  2000/04/19 18:52:52  ivan
  *converted address fields to unsigned long and added fields for physical
  *addresses on cyclades_card structure;
@@ -141,7 +145,7 @@ struct CYZ_BOOT_CTRL {
 /****************** ****************** *******************/
 /*
  *	The data types defined below are used in all ZFIRM interface
- *	data structures. They accommodate differences between HW
+ *	data structures. They accomodate differences between HW
  *	architectures and compilers.
  */
 
@@ -604,6 +608,7 @@ struct cyclades_port {
 	wait_queue_head_t       close_wait;
 	wait_queue_head_t       shutdown_wait;
 	wait_queue_head_t       delta_msr_wait;
+	int throttle;
 };
 
 /*