[PATCH] callout removal: amiserial

callout removal: amiserial

drivers/char/amiserial.c

@@ -102,13 +102,12 @@ static char *serial_version = "4.30";
 
 static char *serial_name = "Amiga-builtin serial driver";
 
-static struct tty_driver serial_driver, callout_driver;
+static struct tty_driver serial_driver;
 static int serial_refcount;
 
 /* serial subtype definitions */
 #ifndef SERIAL_TYPE_NORMAL
 #define SERIAL_TYPE_NORMAL	1
-#define SERIAL_TYPE_CALLOUT	2
 #endif
 
 /* number of characters left in xmit buffer before we ask for more */
@@ -448,8 +447,7 @@ static _INLINE_ void check_modem_status(struct async_struct *info)
 #endif
 		if (!(status & SER_DCD))
 			wake_up_interruptible(&info->open_wait);
-		else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-			   (info->flags & ASYNC_CALLOUT_NOHUP))) {
+		else {
 #ifdef SERIAL_DEBUG_OPEN
 			printk("doing serial hangup...");
 #endif
@@ -1567,8 +1565,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	 */
 	if (info->flags & ASYNC_NORMAL_ACTIVE)
 		info->state->normal_termios = *tty->termios;
-	if (info->flags & ASYNC_CALLOUT_ACTIVE)
-		info->state->callout_termios = *tty->termios;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify 
 	 * the line discipline to only process XON/XOFF characters.
@@ -1613,8 +1609,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		}
 		wake_up_interruptible(&info->open_wait);
 	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
-			 ASYNC_CLOSING);
+	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 	wake_up_interruptible(&info->close_wait);
 	local_irq_restore(flags);
 }
@@ -1698,7 +1693,7 @@ static void rs_hangup(struct tty_struct *tty)
 	shutdown(info);
 	info->event = 0;
 	state->count = 0;
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
+	info->flags &= ~ASYNC_NORMAL_ACTIVE;
 	info->tty = 0;
 	wake_up_interruptible(&info->open_wait);
 }
@@ -1737,44 +1732,18 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 #endif
 	}
 
-	/*
-	 * If this is a callout device, then just make sure the normal
-	 * device isn't being used.
-	 */
-	if (tty->driver->subtype == SERIAL_TYPE_CALLOUT) {
-		if (info->flags & ASYNC_NORMAL_ACTIVE)
-			return -EBUSY;
-		if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-		    (info->flags & ASYNC_SESSION_LOCKOUT) &&
-		    (info->session != current->session))
-		    return -EBUSY;
-		if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-		    (info->flags & ASYNC_PGRP_LOCKOUT) &&
-		    (info->pgrp != current->pgrp))
-		    return -EBUSY;
-		info->flags |= ASYNC_CALLOUT_ACTIVE;
-		return 0;
-	}
-
 	/*
 	 * If non-blocking mode is set, or the port is not enabled,
 	 * then make the check up front and then exit.
 	 */
 	if ((filp->f_flags & O_NONBLOCK) ||
 	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		if (info->flags & ASYNC_CALLOUT_ACTIVE)
-			return -EBUSY;
 		info->flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 
-	if (info->flags & ASYNC_CALLOUT_ACTIVE) {
-		if (state->normal_termios.c_cflag & CLOCAL)
-			do_clocal = 1;
-	} else {
 	if (tty->termios->c_cflag & CLOCAL)
 		do_clocal = 1;
-	}
 
 	/*
 	 * Block waiting for the carrier detect and the line to become
@@ -1798,8 +1767,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	info->blocked_open++;
 	while (1) {
 		local_irq_save(flags);
-		if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
-		    (tty->termios->c_cflag & CBAUD))
+		if (tty->termios->c_cflag & CBAUD)
 		        rtsdtr_ctrl(SER_DTR|SER_RTS);
 		local_irq_restore(flags);
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -1815,8 +1783,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 #endif
 			break;
 		}
-		if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
-		    !(info->flags & ASYNC_CLOSING) &&
+		if (!(info->flags & ASYNC_CLOSING) &&
 		    (do_clocal || (!(ciab.pra & SER_DCD)) ))
 			break;
 		if (signal_pending(current)) {
@@ -1957,14 +1924,9 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 
 	if ((info->state->count == 1) &&
 	    (info->flags & ASYNC_SPLIT_TERMIOS)) {
-		if (tty->driver->subtype == SERIAL_TYPE_NORMAL)
 		*tty->termios = info->state->normal_termios;
-		else 
-			*tty->termios = info->state->callout_termios;
 		change_speed(info, 0);
 	}
-	info->session = current->session;
-	info->pgrp = current->pgrp;
 
 #ifdef SERIAL_DEBUG_OPEN
 	printk("rs_open %s successful...", tty->name);
@@ -2150,21 +2112,8 @@ static int __init rs_init(void)
 	serial_driver.wait_until_sent = rs_wait_until_sent;
 	serial_driver.read_proc = rs_read_proc;
 
-	/*
-	 * The callout device is just like normal device except for
-	 * major number and the subtype code.
-	 */
-	callout_driver = serial_driver;
-	callout_driver.name = "cua";
-	callout_driver.major = TTYAUX_MAJOR;
-	callout_driver.subtype = SERIAL_TYPE_CALLOUT;
-	callout_driver.read_proc = 0;
-	callout_driver.proc_entry = 0;
-
 	if (tty_register_driver(&serial_driver))
 		panic("Couldn't register serial driver\n");
-	if (tty_register_driver(&callout_driver))
-		panic("Couldn't register callout driver\n");
 
 	state = rs_table;
 	state->magic = SSTATE_MAGIC;
@@ -2173,7 +2122,6 @@ static int __init rs_init(void)
 	state->custom_divisor = 0;
 	state->close_delay = 5*HZ/10;
 	state->closing_wait = 30*HZ;
-	state->callout_termios = callout_driver.init_termios;
 	state->normal_termios = serial_driver.init_termios;
 	state->icount.cts = state->icount.dsr = 
 	  state->icount.rng = state->icount.dcd = 0;
@@ -2229,9 +2177,6 @@ static __exit void rs_exit(void)
 	if ((e1 = tty_unregister_driver(&serial_driver)))
 		printk("SERIAL: failed to unregister serial driver (%d)\n",
 		       e1);
-	if ((e2 = tty_unregister_driver(&callout_driver)))
-		printk("SERIAL: failed to unregister callout driver (%d)\n", 
-		       e2);
 
 	if (info) {
 	  rs_table[0].info = NULL;