brcmfmac: add peer-to-peer group discovery support

First part for P2P support. It is a variation on the existing
scanning functionality and is used to discover peer-to-peer
group owners and/or peer-to-peer devices in listen state.

Tested with wpa_cli/wpa_supplicant v2.0-devel.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmfmac/Makefile

@@ -26,6 +26,7 @@ brcmfmac-objs += \
 		wl_cfg80211.o \
 		fwil.o \
 		fweh.o \
+		p2p.o \
 		dhd_cdc.o \
 		dhd_common.o \
 		dhd_linux.o

drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c

@@ -26,6 +26,7 @@
 #include "dhd_bus.h"
 #include "dhd_proto.h"
 #include "dhd_dbg.h"
+#include "p2p.h"
 #include "wl_cfg80211.h"
 #include "fwil.h"
 

drivers/net/wireless/brcm80211/brcmfmac/p2p.h

+/*
+ * Copyright (c) 2012 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef WL_CFGP2P_H_
+#define WL_CFGP2P_H_
+
+#include <net/cfg80211.h>
+
+struct brcmf_cfg80211_info;
+
+/* vendor ies max buffer length for probe response or beacon */
+#define VNDR_IES_MAX_BUF_LEN 1400
+/* normal vendor ies buffer length */
+#define VNDR_IES_BUF_LEN 512
+
+/* Structure to hold all saved P2P and WPS IEs for a BSSCFG */
+/**
+ * enum p2p_bss_type - different type of BSS configurations.
+ *
+ * @P2PAPI_BSSCFG_PRIMARY: maps to driver's primary bsscfg.
+ * @P2PAPI_BSSCFG_DEVICE: maps to driver's P2P device discovery bsscfg.
+ * @P2PAPI_BSSCFG_CONNECTION: maps to driver's P2P connection bsscfg.
+ * @P2PAPI_BSSCFG_MAX: used for range checking.
+ */
+enum p2p_bss_type {
+	P2PAPI_BSSCFG_PRIMARY, /* maps to driver's primary bsscfg */
+	P2PAPI_BSSCFG_DEVICE, /* maps to driver's P2P device discovery bsscfg */
+	P2PAPI_BSSCFG_CONNECTION, /* maps to driver's P2P connection bsscfg */
+	P2PAPI_BSSCFG_MAX
+};
+
+/**
+ * struct p2p_bss - peer-to-peer bss related information.
+ *
+ * @vif: virtual interface of this P2P bss.
+ * @private_data: TBD
+ */
+struct p2p_bss {
+	struct brcmf_cfg80211_vif *vif;
+	void *private_data;
+};
+
+/**
+ * enum brcmf_p2p_status - P2P specific dongle status.
+ *
+ * @BRCMF_P2P_STATUS_IF_ADD: peer-to-peer vif add sent to dongle.
+ * @BRCMF_P2P_STATUS_IF_DEL: NOT-USED?
+ * @BRCMF_P2P_STATUS_IF_DELETING: peer-to-peer vif delete sent to dongle.
+ * @BRCMF_P2P_STATUS_IF_CHANGING: peer-to-peer vif change sent to dongle.
+ * @BRCMF_P2P_STATUS_IF_CHANGED: peer-to-peer vif change completed on dongle.
+ * @BRCMF_P2P_STATUS_LISTEN_EXPIRED: listen duration expired.
+ * @BRCMF_P2P_STATUS_ACTION_TX_COMPLETED: action frame tx completed.
+ * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked.
+ * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing.
+ */
+enum brcmf_p2p_status {
+	BRCMF_P2P_STATUS_IF_ADD = 0,
+	BRCMF_P2P_STATUS_IF_DEL,
+	BRCMF_P2P_STATUS_IF_DELETING,
+	BRCMF_P2P_STATUS_IF_CHANGING,
+	BRCMF_P2P_STATUS_IF_CHANGED,
+	BRCMF_P2P_STATUS_LISTEN_EXPIRED,
+	BRCMF_P2P_STATUS_ACTION_TX_COMPLETED,
+	BRCMF_P2P_STATUS_ACTION_TX_NOACK,
+	BRCMF_P2P_STATUS_GO_NEG_PHASE
+};
+
+/**
+ * struct brcmf_p2p_info - p2p specific driver information.
+ *
+ * @cfg: driver private data for cfg80211 interface.
+ * @status: status of P2P (see enum brcmf_p2p_status).
+ * @dev_addr: P2P device address.
+ * @int_addr: P2P interface address.
+ * @bss_idx: informate for P2P bss types.
+ * @listen_timer: timer for @WL_P2P_DISC_ST_LISTEN discover state.
+ * @ssid: ssid for P2P GO.
+ * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state.
+ */
+struct brcmf_p2p_info {
+	struct brcmf_cfg80211_info *cfg;
+	unsigned long status;
+	u8 dev_addr[ETH_ALEN];
+	u8 int_addr[ETH_ALEN];
+	struct p2p_bss bss_idx[P2PAPI_BSSCFG_MAX];
+	struct timer_list listen_timer;
+	struct brcmf_ssid ssid;
+	u8 listen_channel;
+};
+
+void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg);
+void brcmf_p2p_detach(struct brcmf_p2p_info *p2p);
+struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
+				       enum nl80211_iftype type, u32 *flags,
+				       struct vif_params *params);
+int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev);
+int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev);
+void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev);
+int brcmf_p2p_scan_prep(struct wiphy *wiphy,
+			struct cfg80211_scan_request *request);
+
+#endif /* WL_CFGP2P_H_ */

drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h

@@ -41,6 +41,38 @@
 #define WL_AUTH_SHARED_KEY		1	/* d11 shared authentication */
 #define IE_MAX_LEN			512
 
+/* IE TLV processing */
+#define TLV_LEN_OFF			1	/* length offset */
+#define TLV_HDR_LEN			2	/* header length */
+#define TLV_BODY_OFF			2	/* body offset */
+#define TLV_OUI_LEN			3	/* oui id length */
+
+/* 802.11 Mgmt Packet flags */
+#define BRCMF_VNDR_IE_BEACON_FLAG	0x1
+#define BRCMF_VNDR_IE_PRBRSP_FLAG	0x2
+#define BRCMF_VNDR_IE_ASSOCRSP_FLAG	0x4
+#define BRCMF_VNDR_IE_AUTHRSP_FLAG	0x8
+#define BRCMF_VNDR_IE_PRBREQ_FLAG	0x10
+#define BRCMF_VNDR_IE_ASSOCREQ_FLAG	0x20
+/* vendor IE in IW advertisement protocol ID field */
+#define BRCMF_VNDR_IE_IWAPID_FLAG	0x40
+/* allow custom IE id */
+#define BRCMF_VNDR_IE_CUSTOM_FLAG	0x100
+
+/* P2P Action Frames flags (spec ordered) */
+#define BRCMF_VNDR_IE_GONREQ_FLAG     0x001000
+#define BRCMF_VNDR_IE_GONRSP_FLAG     0x002000
+#define BRCMF_VNDR_IE_GONCFM_FLAG     0x004000
+#define BRCMF_VNDR_IE_INVREQ_FLAG     0x008000
+#define BRCMF_VNDR_IE_INVRSP_FLAG     0x010000
+#define BRCMF_VNDR_IE_DISREQ_FLAG     0x020000
+#define BRCMF_VNDR_IE_DISRSP_FLAG     0x040000
+#define BRCMF_VNDR_IE_PRDREQ_FLAG     0x080000
+#define BRCMF_VNDR_IE_PRDRSP_FLAG     0x100000
+
+#define BRCMF_VNDR_IE_P2PAF_SHIFT	12
+
+
 /**
  * enum brcmf_scan_status - dongle scan status
  *
@@ -52,11 +84,19 @@ enum brcmf_scan_status {
 	BRCMF_SCAN_STATUS_ABORT,
 };
 
-/* wi-fi mode */
+/**
+ * enum wl_mode - driver mode of virtual interface.
+ *
+ * @WL_MODE_BSS: connects to BSS.
+ * @WL_MODE_IBSS: operate as ad-hoc.
+ * @WL_MODE_AP: operate as access-point.
+ * @WL_MODE_P2P: provide P2P discovery.
+ */
 enum wl_mode {
 	WL_MODE_BSS,
 	WL_MODE_IBSS,
-	WL_MODE_AP
+	WL_MODE_AP,
+	WL_MODE_P2P
 };
 
 /* dongle configuration */
@@ -122,14 +162,18 @@ enum brcmf_vif_status {
 /**
  * struct vif_saved_ie - holds saved IEs for a virtual interface.
  *
+ * @probe_req_ie: IE info for probe request.
  * @probe_res_ie: IE info for probe response.
  * @beacon_ie: IE info for beacon frame.
+ * @probe_req_ie_len: IE info length for probe request.
  * @probe_res_ie_len: IE info length for probe response.
  * @beacon_ie_len: IE info length for beacon frame.
  */
 struct vif_saved_ie {
+	u8  probe_req_ie[VNDR_IES_BUF_LEN];
 	u8  probe_res_ie[IE_MAX_LEN];
 	u8  beacon_ie[IE_MAX_LEN];
+	u32 probe_req_ie_len;
 	u32 probe_res_ie_len;
 	u32 beacon_ie_len;
 };
@@ -189,6 +233,9 @@ struct escan_info {
 	u8 escan_buf[WL_ESCAN_BUF_SIZE];
 	struct wiphy *wiphy;
 	struct net_device *ndev;
+	s32 (*run)(struct brcmf_cfg80211_info *cfg,
+		   struct net_device *ndev,
+		   struct cfg80211_scan_request *request, u16 action);
 };
 
 /**
@@ -277,6 +324,7 @@ struct brcmf_pno_scanresults_le {
  *
  * @wiphy: wiphy object for cfg80211 interface.
  * @conf: dongle configuration.
+ * @p2p: peer-to-peer specific information.
  * @scan_request: cfg80211 scan request object.
  * @usr_sync: mainly for dongle up/down synchronization.
  * @bss_list: bss_list holding scanned ap information.
@@ -308,6 +356,7 @@ struct brcmf_pno_scanresults_le {
 struct brcmf_cfg80211_info {
 	struct wiphy *wiphy;
 	struct brcmf_cfg80211_conf *conf;
+	struct brcmf_p2p_info p2p;
 	struct cfg80211_scan_request *scan_request;
 	struct mutex usr_sync;
 	struct brcmf_scan_results *bss_list;
@@ -337,6 +386,19 @@ struct brcmf_cfg80211_info {
 	u8 vif_cnt;
 };
 
+/**
+ * struct brcmf_tlv - tag_ID/length/value_buffer tuple.
+ *
+ * @id: tag identifier.
+ * @len: number of bytes in value buffer.
+ * @data: value buffer.
+ */
+struct brcmf_tlv {
+	u8 id;
+	u8 len;
+	u8 data[1];
+};
+
 static inline struct wiphy *cfg_to_wiphy(struct brcmf_cfg80211_info *cfg)
 {
 	return cfg->wiphy;
@@ -389,4 +451,16 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg);
 s32 brcmf_cfg80211_up(struct net_device *ndev);
 s32 brcmf_cfg80211_down(struct net_device *ndev);
 
+struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg,
+					   struct net_device *netdev,
+					   enum nl80211_iftype type,
+					   bool pm_block);
+void brcmf_free_vif(struct brcmf_cfg80211_vif *vif);
+
+s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag,
+			  const u8 *vndr_ie_buf, u32 vndr_ie_len);
+struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key);
+u16 channel_to_chanspec(struct ieee80211_channel *ch);
+u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state);
+
 #endif				/* _wl_cfg80211_h_ */