[ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi branches into release

Signed-off-by: Len Brown <len.brown@intel.com>

Documentation/kernel-parameters.txt

@@ -452,6 +452,11 @@ running once the system is up.
 
 	eata=		[HW,SCSI]
 
+	ec_intr=	[HW,ACPI] ACPI Embedded Controller interrupt mode
+			Format: <int>
+			0: polling mode
+			non-0: interrupt mode (default)
+
 	eda=		[HW,PS2]
 
 	edb=		[HW,PS2]

arch/i386/kernel/acpi/Makefile

@@ -3,6 +3,6 @@ obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
-obj-y				+= cstate.o
+obj-y				+= cstate.o processor.o
 endif
 

arch/i386/kernel/acpi/boot.c

@@ -464,7 +464,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 {
 	unsigned int irq;
 	unsigned int plat_gsi = gsi;
@@ -476,14 +476,14 @@ int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
 		extern void eisa_set_level_irq(unsigned int irq);
 
-		if (edge_level == ACPI_LEVEL_SENSITIVE)
+		if (triggering == ACPI_LEVEL_SENSITIVE)
 			eisa_set_level_irq(gsi);
 	}
 #endif
 
 #ifdef CONFIG_X86_IO_APIC
 	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
-		plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
+		plat_gsi = mp_register_gsi(gsi, triggering, polarity);
 	}
 #endif
 	acpi_gsi_to_irq(plat_gsi, &irq);

arch/i386/kernel/acpi/cstate.c

@@ -14,64 +14,6 @@
 #include <acpi/processor.h>
 #include <asm/acpi.h>
 
-static void acpi_processor_power_init_intel_pdc(struct acpi_processor_power
-						*pow)
-{
-	struct acpi_object_list *obj_list;
-	union acpi_object *obj;
-	u32 *buf;
-
-	/* allocate and initialize pdc. It will be used later. */
-	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
-	if (!obj_list) {
-		printk(KERN_ERR "Memory allocation error\n");
-		return;
-	}
-
-	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-	if (!obj) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj_list);
-		return;
-	}
-
-	buf = kmalloc(12, GFP_KERNEL);
-	if (!buf) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj);
-		kfree(obj_list);
-		return;
-	}
-
-	buf[0] = ACPI_PDC_REVISION_ID;
-	buf[1] = 1;
-	buf[2] = ACPI_PDC_C_CAPABILITY_SMP;
-
-	obj->type = ACPI_TYPE_BUFFER;
-	obj->buffer.length = 12;
-	obj->buffer.pointer = (u8 *) buf;
-	obj_list->count = 1;
-	obj_list->pointer = obj;
-	pow->pdc = obj_list;
-
-	return;
-}
-
-/* Initialize _PDC data based on the CPU vendor */
-void acpi_processor_power_init_pdc(struct acpi_processor_power *pow,
-				   unsigned int cpu)
-{
-	struct cpuinfo_x86 *c = cpu_data + cpu;
-
-	pow->pdc = NULL;
-	if (c->x86_vendor == X86_VENDOR_INTEL)
-		acpi_processor_power_init_intel_pdc(pow);
-
-	return;
-}
-
-EXPORT_SYMBOL(acpi_processor_power_init_pdc);
-
 /*
  * Initialize bm_flags based on the CPU cache properties
  * On SMP it depends on cache configuration

arch/i386/kernel/acpi/processor.c

+/*
+ * arch/i386/kernel/acpi/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * 	- Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
+{
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
+
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return;
+	}
+
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return;
+	}
+
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return;
+	}
+
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
+	buf[2] = ACPI_PDC_C_CAPABILITY_SMP;
+
+	if (cpu_has(c, X86_FEATURE_EST))
+		buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
+
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
+	pr->pdc = obj_list;
+
+	return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+	unsigned int cpu = pr->id;
+	struct cpuinfo_x86 *c = cpu_data + cpu;
+
+	pr->pdc = NULL;
+	if (c->x86_vendor == X86_VENDOR_INTEL)
+		init_intel_pdc(pr, c);
+
+	return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);

arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c

@@ -295,68 +295,6 @@ acpi_cpufreq_guess_freq (
 }
 
 
-/* 
- * acpi_processor_cpu_init_pdc_est - let BIOS know about the SMP capabilities
- * of this driver
- * @perf: processor-specific acpi_io_data struct
- * @cpu: CPU being initialized
- *
- * To avoid issues with legacy OSes, some BIOSes require to be informed of
- * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC 
- * accordingly, for Enhanced Speedstep. Actual call to _PDC is done in
- * driver/acpi/processor.c
- */
-static void 
-acpi_processor_cpu_init_pdc_est(
-		struct acpi_processor_performance *perf, 
-		unsigned int cpu,
-		struct acpi_object_list *obj_list
-		)
-{
-	union acpi_object *obj;
-	u32 *buf;
-	struct cpuinfo_x86 *c = cpu_data + cpu;
-	dprintk("acpi_processor_cpu_init_pdc_est\n");
-
-	if (!cpu_has(c, X86_FEATURE_EST))
-		return;
-
-	/* Initialize pdc. It will be used later. */
-	if (!obj_list)
-		return;
-		
-	if (!(obj_list->count && obj_list->pointer))
-		return;
-
-	obj = obj_list->pointer;
-	if ((obj->buffer.length == 12) && obj->buffer.pointer) {
-		buf = (u32 *)obj->buffer.pointer;
-       		buf[0] = ACPI_PDC_REVISION_ID;
-       		buf[1] = 1;
-       		buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
-		perf->pdc = obj_list;
-	}
-	return;
-}
- 
-
-/* CPU specific PDC initialization */
-static void 
-acpi_processor_cpu_init_pdc(
-		struct acpi_processor_performance *perf, 
-		unsigned int cpu,
-		struct acpi_object_list *obj_list
-		)
-{
-	struct cpuinfo_x86 *c = cpu_data + cpu;
-	dprintk("acpi_processor_cpu_init_pdc\n");
-	perf->pdc = NULL;
-	if (cpu_has(c, X86_FEATURE_EST))
-		acpi_processor_cpu_init_pdc_est(perf, cpu, obj_list);
-	return;
-}
-
-
 static int
 acpi_cpufreq_cpu_init (
 	struct cpufreq_policy   *policy)
@@ -367,14 +305,7 @@ acpi_cpufreq_cpu_init (
 	unsigned int		result = 0;
 	struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
 
-	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
-	u32				arg0_buf[3];
-	struct acpi_object_list 	arg_list = {1, &arg0};
-
 	dprintk("acpi_cpufreq_cpu_init\n");
-	/* setup arg_list for _PDC settings */
-        arg0.buffer.length = 12;
-        arg0.buffer.pointer = (u8 *) arg0_buf;
 
 	data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
 	if (!data)
@@ -382,9 +313,7 @@ acpi_cpufreq_cpu_init (
 
 	acpi_io_data[cpu] = data;
 
-	acpi_processor_cpu_init_pdc(&data->acpi_data, cpu, &arg_list);
 	result = acpi_processor_register_performance(&data->acpi_data, cpu);
-	data->acpi_data.pdc = NULL;
 
 	if (result)
 		goto err_free;

arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c

@@ -362,22 +362,10 @@ static struct acpi_processor_performance p;
  */
 static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
 {
-	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
-	u32				arg0_buf[3];
-	struct acpi_object_list		arg_list = {1, &arg0};
 	unsigned long			cur_freq;
 	int				result = 0, i;
 	unsigned int			cpu = policy->cpu;
 
-	/* _PDC settings */
-	arg0.buffer.length = 12;
-	arg0.buffer.pointer = (u8 *) arg0_buf;
-	arg0_buf[0] = ACPI_PDC_REVISION_ID;
-	arg0_buf[1] = 1;
-	arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP_MSR;
-
-	p.pdc = &arg_list;
-
 	/* register with ACPI core */
 	if (acpi_processor_register_performance(&p, cpu)) {
 		dprintk(KERN_INFO PFX "obtaining ACPI data failed\n");

arch/i386/kernel/mpparse.c

@@ -1080,7 +1080,7 @@ void __init mp_config_acpi_legacy_irqs (void)
 
 #define MAX_GSI_NUM	4096
 
-int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
+int mp_register_gsi (u32 gsi, int triggering, int polarity)
 {
 	int			ioapic = -1;
 	int			ioapic_pin = 0;
@@ -1129,7 +1129,7 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 
 	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
 
-	if (edge_level) {
+	if (triggering == ACPI_LEVEL_SENSITIVE) {
 		/*
 		 * For PCI devices assign IRQs in order, avoiding gaps
 		 * due to unused I/O APIC pins.
@@ -1151,8 +1151,8 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 	}
 
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-		    edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
-		    active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+		    triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+		    polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
 	return gsi;
 }
 

arch/ia64/kernel/Makefile

@@ -13,6 +13,11 @@ obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 obj-$(CONFIG_IA64_GENERIC)	+= acpi-ext.o
 obj-$(CONFIG_IA64_HP_ZX1)	+= acpi-ext.o
 obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y				+= acpi-processor.o
+endif
+
 obj-$(CONFIG_IA64_PALINFO)	+= palinfo.o
 obj-$(CONFIG_IOSAPIC)		+= iosapic.o
 obj-$(CONFIG_MODULES)		+= module.o

arch/ia64/kernel/acpi-ext.c

@@ -33,33 +33,33 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context)
 	struct acpi_vendor_info *info = (struct acpi_vendor_info *)context;
 	struct acpi_resource_vendor *vendor;
 	struct acpi_vendor_descriptor *descriptor;
-	u32 length;
+	u32 byte_length;
 
-	if (resource->id != ACPI_RSTYPE_VENDOR)
+	if (resource->type != ACPI_RESOURCE_TYPE_VENDOR)
 		return AE_OK;
 
 	vendor = (struct acpi_resource_vendor *)&resource->data;
-	descriptor = (struct acpi_vendor_descriptor *)vendor->reserved;
-	if (vendor->length <= sizeof(*info->descriptor) ||
+	descriptor = (struct acpi_vendor_descriptor *)vendor->byte_data;
+	if (vendor->byte_length <= sizeof(*info->descriptor) ||
 	    descriptor->guid_id != info->descriptor->guid_id ||
 	    efi_guidcmp(descriptor->guid, info->descriptor->guid))
 		return AE_OK;
 
-	length = vendor->length - sizeof(struct acpi_vendor_descriptor);
-	info->data = acpi_os_allocate(length);
+	byte_length = vendor->byte_length - sizeof(struct acpi_vendor_descriptor);
+	info->data = acpi_os_allocate(byte_length);
 	if (!info->data)
 		return AE_NO_MEMORY;
 
 	memcpy(info->data,
-	       vendor->reserved + sizeof(struct acpi_vendor_descriptor),
-	       length);
-	info->length = length;
+	       vendor->byte_data + sizeof(struct acpi_vendor_descriptor),
+	       byte_length);
+	info->length = byte_length;
 	return AE_CTRL_TERMINATE;
 }
 
 acpi_status
 acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id,
-			  u8 ** data, u32 * length)
+			  u8 ** data, u32 * byte_length)
 {
 	struct acpi_vendor_info info;
 
@@ -72,7 +72,7 @@ acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id,
 		return AE_NOT_FOUND;
 
 	*data = info.data;
-	*length = info.length;
+	*byte_length = info.length;
 	return AE_OK;
 }
 

arch/ia64/kernel/acpi-processor.c

+/*
+ * arch/ia64/kernel/cpufreq/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * 	- Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr)
+{
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
+
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return;
+	}
+
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return;
+	}
+
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return;
+	}
+
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
+	buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
+
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
+	pr->pdc = obj_list;
+
+	return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+	pr->pdc = NULL;
+	init_intel_pdc(pr);
+	return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);

arch/ia64/kernel/acpi.c

@@ -567,16 +567,16 @@ void __init acpi_numa_arch_fixup(void)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 {
 	if (has_8259 && gsi < 16)
 		return isa_irq_to_vector(gsi);
 
 	return iosapic_register_intr(gsi,
-				     (active_high_low ==
+				     (polarity ==
 				      ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH :
 				     IOSAPIC_POL_LOW,
-				     (edge_level ==
+				     (triggering ==
 				      ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
 				     IOSAPIC_LEVEL);
 }

arch/ia64/kernel/cpufreq/Makefile

 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= acpi-cpufreq.o
+

arch/ia64/kernel/cpufreq/acpi-cpufreq.c

@@ -269,48 +269,6 @@ acpi_cpufreq_verify (
 }
 
 
-/*
- * processor_init_pdc - let BIOS know about the SMP capabilities
- * of this driver
- * @perf: processor-specific acpi_io_data struct
- * @cpu: CPU being initialized
- *
- * To avoid issues with legacy OSes, some BIOSes require to be informed of
- * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC
- * accordingly. Actual call to _PDC is done in driver/acpi/processor.c
- */
-static void
-processor_init_pdc (
-		struct acpi_processor_performance *perf,
-		unsigned int cpu,
-		struct acpi_object_list *obj_list
-		)
-{
-	union acpi_object *obj;
-	u32 *buf;
-
-	dprintk("processor_init_pdc\n");
-
-	perf->pdc = NULL;
-	/* Initialize pdc. It will be used later. */
-	if (!obj_list)
-		return;
-
-	if (!(obj_list->count && obj_list->pointer))
-		return;
-
-	obj = obj_list->pointer;
-	if ((obj->buffer.length == 12) && obj->buffer.pointer) {
-		buf = (u32 *)obj->buffer.pointer;
-       		buf[0] = ACPI_PDC_REVISION_ID;
-       		buf[1] = 1;
-       		buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
-		perf->pdc = obj_list;
-	}
-	return;
-}
-
-
 static int
 acpi_cpufreq_cpu_init (
 	struct cpufreq_policy   *policy)
@@ -320,14 +278,7 @@ acpi_cpufreq_cpu_init (
 	struct cpufreq_acpi_io	*data;
 	unsigned int		result = 0;
 
-	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
-	u32				arg0_buf[3];
-	struct acpi_object_list 	arg_list = {1, &arg0};
-
 	dprintk("acpi_cpufreq_cpu_init\n");
-	/* setup arg_list for _PDC settings */
-        arg0.buffer.length = 12;
-        arg0.buffer.pointer = (u8 *) arg0_buf;
 
 	data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
 	if (!data)
@@ -337,9 +288,7 @@ acpi_cpufreq_cpu_init (
 
 	acpi_io_data[cpu] = data;
 
-	processor_init_pdc(&data->acpi_data, cpu, &arg_list);
 	result = acpi_processor_register_performance(&data->acpi_data, cpu);
-	data->acpi_data.pdc = NULL;
 
 	if (result)
 		goto err_free;

arch/ia64/pci/pci.c

@@ -193,12 +193,12 @@ add_io_space (struct pci_root_info *info, struct acpi_resource_address64 *addr)
 		goto free_resource;
 	}
 
-	min = addr->min_address_range;
+	min = addr->minimum;
 	max = min + addr->address_length - 1;
-	if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION)
+	if (addr->info.io.translation_type == ACPI_SPARSE_TRANSLATION)
 		sparse = 1;
 
-	space_nr = new_space(addr->address_translation_offset, sparse);
+	space_nr = new_space(addr->translation_offset, sparse);
 	if (space_nr == ~0)
 		goto free_name;
 
@@ -285,7 +285,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	if (addr.resource_type == ACPI_MEMORY_RANGE) {
 		flags = IORESOURCE_MEM;
 		root = &iomem_resource;
-		offset = addr.address_translation_offset;
+		offset = addr.translation_offset;
 	} else if (addr.resource_type == ACPI_IO_RANGE) {
 		flags = IORESOURCE_IO;
 		root = &ioport_resource;
@@ -298,7 +298,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	window = &info->controller->window[info->controller->windows++];
 	window->resource.name = info->name;
 	window->resource.flags = flags;
-	window->resource.start = addr.min_address_range + offset;
+	window->resource.start = addr.minimum + offset;
 	window->resource.end = window->resource.start + addr.address_length - 1;
 	window->resource.child = NULL;
 	window->offset = offset;

arch/x86_64/kernel/acpi/Makefile

 obj-y			:= boot.o
 boot-y			:= ../../../i386/kernel/acpi/boot.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y			+= processor.o
+endif
+

arch/x86_64/kernel/acpi/processor.c

+/*
+ * arch/x86_64/kernel/acpi/processor.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * 	- Added _PDC for platforms with Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
+{
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
+
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return;
+	}
+
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return;
+	}
+
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return;
+	}
+
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
+	buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
+
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
+	pr->pdc = obj_list;
+
+	return;
+}
+
+/* Initialize _PDC data based on the CPU vendor */
+void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
+{
+	unsigned int cpu = pr->id;
+	struct cpuinfo_x86 *c = cpu_data + cpu;
+
+	pr->pdc = NULL;
+	if (c->x86_vendor == X86_VENDOR_INTEL && cpu_has(c, X86_FEATURE_EST))
+		init_intel_pdc(pr, c);
+
+	return;
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_init_pdc);

arch/x86_64/kernel/io_apic.c

@@ -2027,7 +2027,7 @@ int __init io_apic_get_redir_entries (int ioapic)
 }
 
 
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
 {
 	struct IO_APIC_route_entry entry;
 	unsigned long flags;
@@ -2049,8 +2049,8 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.dest_mode = INT_DEST_MODE;
 	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.trigger = edge_level;
-	entry.polarity = active_high_low;
+	entry.trigger = triggering;
+	entry.polarity = polarity;
 	entry.mask = 1;					 /* Disabled (masked) */
 
 	irq = gsi_irq_sharing(irq);
@@ -2065,9 +2065,9 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
 		"IRQ %d Mode:%i Active:%i)\n", ioapic, 
 	       mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
-	       edge_level, active_high_low);
+	       triggering, polarity);
 
-	ioapic_register_intr(irq, entry.vector, edge_level);
+	ioapic_register_intr(irq, entry.vector, triggering);
 
 	if (!ioapic && (irq < 16))
 		disable_8259A_irq(irq);

arch/x86_64/kernel/mpparse.c

@@ -915,7 +915,7 @@ void __init mp_config_acpi_legacy_irqs (void)
 
 #define MAX_GSI_NUM	4096
 
-int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
 {
 	int			ioapic = -1;
 	int			ioapic_pin = 0;
@@ -964,7 +964,7 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
 
 	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
 
-	if (edge_level) {
+	if (triggering == ACPI_LEVEL_SENSITIVE) {
 		/*
 		 * For PCI devices assign IRQs in order, avoiding gaps
 		 * due to unused I/O APIC pins.
@@ -986,8 +986,8 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
 	}
 
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-		edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
-		active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+		triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+		polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
 	return gsi;
 }
 

drivers/acpi/Kconfig

@@ -267,7 +267,6 @@ config ACPI_DEBUG
 
 config ACPI_EC
 	bool
-	depends on X86
 	default y
 	help
 	  This driver is required on some systems for the proper operation of

drivers/acpi/acpi_memhotplug.c

@@ -71,8 +71,8 @@ static struct acpi_driver acpi_memory_device_driver = {
 struct acpi_memory_device {
 	acpi_handle handle;
 	unsigned int state;	/* State of the memory device */
-	unsigned short cache_attribute;	/* memory cache attribute */
-	unsigned short read_write_attribute;	/* memory read/write attribute */
+	unsigned short caching;	/* memory cache attribute */
+	unsigned short write_protect;	/* memory read/write attribute */
 	u64 start_addr;		/* Memory Range start physical addr */
 	u64 end_addr;		/* Memory Range end physical addr */
 };
@@ -97,12 +97,12 @@ acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
 	if (ACPI_SUCCESS(status)) {
 		if (address64.resource_type == ACPI_MEMORY_RANGE) {
 			/* Populate the structure */
-			mem_device->cache_attribute =
-			    address64.attribute.memory.cache_attribute;
-			mem_device->read_write_attribute =
-			    address64.attribute.memory.read_write_attribute;
-			mem_device->start_addr = address64.min_address_range;
-			mem_device->end_addr = address64.max_address_range;
+			mem_device->caching =
+			    address64.info.mem.caching;
+			mem_device->write_protect =
+			    address64.info.mem.write_protect;
+			mem_device->start_addr = address64.minimum;
+			mem_device->end_addr = address64.maximum;
 		}
 	}
 
@@ -250,7 +250,6 @@ static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
 	int result;
 	u64 start = mem_device->start_addr;
 	u64 len = mem_device->end_addr - start + 1;
-	unsigned long attr = mem_device->read_write_attribute;
 
 	ACPI_FUNCTION_TRACE("acpi_memory_disable_device");
 

drivers/acpi/asus_acpi.c

@@ -78,9 +78,9 @@ MODULE_LICENSE("GPL");
 static uid_t asus_uid;
 static gid_t asus_gid;
 module_param(asus_uid, uint, 0);
-MODULE_PARM_DESC(uid, "UID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n");
 module_param(asus_gid, uint, 0);
-MODULE_PARM_DESC(gid, "GID for entries in /proc/acpi/asus.\n");
+MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n");
 
 /* For each model, all features implemented, 
  * those marked with R are relative to HOTK, A for absolute */
@@ -302,7 +302,7 @@ static struct model_data model_conf[END_MODEL] = {
 	 .brightness_set = "SPLV",
 	 .brightness_get = "GPLV",
 	 .display_set = "SDSP",
-	 .display_get = "\\SSTE"},
+	 .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
 	{
 	 .name = "M6R",
 	 .mt_mled = "MLED",
@@ -851,6 +851,8 @@ static int __init asus_hotk_add_fs(struct acpi_device *device)
 		mode = S_IFREG | S_IRUGO | S_IWUGO;
 	} else {
 		mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
+		printk(KERN_WARNING "  asus_uid and asus_gid parameters are "
+		       "deprecated, use chown and chmod instead!\n");
 	}
 
 	acpi_device_dir(device) = asus_proc_dir;
@@ -987,9 +989,21 @@ static int __init asus_hotk_get_info(void)
 		printk(KERN_NOTICE "  BSTS called, 0x%02x returned\n",
 		       bsts_result);
 
-	/* Samsung P30 has a device with a valid _HID whose INIT does not 
-	 * return anything. Catch this one and any similar here */
-	if (buffer.pointer == NULL) {
+	/* This is unlikely with implicit return */
+	if (buffer.pointer == NULL)
+		return -EINVAL;
+
+	model = (union acpi_object *) buffer.pointer;
+	/*
+	 * Samsung P30 has a device with a valid _HID whose INIT does not 
+	 * return anything. It used to be possible to catch this exception,
+	 * but the implicit return code will now happily confuse the 
+	 * driver. We assume that every ACPI_TYPE_STRING is a valid model
+	 * identifier but it's still possible to get completely bogus data.
+	 */
+	if (model->type == ACPI_TYPE_STRING) {
+		printk(KERN_NOTICE "  %s model detected, ", model->string.pointer);
+	} else {
 		if (asus_info &&	/* Samsung P30 */
 		    strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
 			hotk->model = P30;
@@ -1002,13 +1016,10 @@ static int __init asus_hotk_get_info(void)
 			       "the developers with your DSDT\n");
 		}
 		hotk->methods = &model_conf[hotk->model];
-		return AE_OK;
-	}
 		
-	model = (union acpi_object *)buffer.pointer;
-	if (model->type == ACPI_TYPE_STRING) {
-		printk(KERN_NOTICE "  %s model detected, ",
-		       model->string.pointer);
+		acpi_os_free(model);
+
+		return AE_OK;
 	}
 
 	hotk->model = END_MODEL;

drivers/acpi/dispatcher/dsfield.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -293,7 +293,7 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
 			    + (acpi_integer) arg->common.value.size;
 
 			if (position > ACPI_UINT32_MAX) {
-				ACPI_REPORT_ERROR(("Field [%4.4s] bit offset too large (> 0xFFFFFFFF)\n", (char *)&info->field_node->name));
+				ACPI_REPORT_ERROR(("Field [%4.4s] bit offset too large (> 0xFFFFFFFF)\n", ACPI_CAST_PTR(char, &info->field_node->name)));
 				return_ACPI_STATUS(AE_SUPPORT);
 			}
 
@@ -302,8 +302,7 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
 
 		default:
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Invalid opcode in field list: %X\n",
+			ACPI_REPORT_ERROR(("Invalid opcode in field list: %X\n",
 					   arg->common.aml_opcode));
 			return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 		}

drivers/acpi/dispatcher/dsinit.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -84,7 +84,7 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 	acpi_object_type type;
 	acpi_status status;
 
-	ACPI_FUNCTION_NAME("ds_init_one_object");
+	ACPI_FUNCTION_ENTRY();
 
 	/*
 	 * We are only interested in NS nodes owned by the table that
@@ -105,11 +105,7 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 
 		status = acpi_ds_initialize_region(obj_handle);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Region %p [%4.4s] - Init failure, %s\n",
-					  obj_handle,
-					  acpi_ut_get_node_name(obj_handle),
-					  acpi_format_exception(status)));
+			ACPI_REPORT_ERROR(("Region %p [%4.4s] - Init failure, %s\n", obj_handle, acpi_ut_get_node_name(obj_handle), acpi_format_exception(status)));
 		}
 
 		info->op_region_count++;
@@ -117,14 +113,6 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 
 	case ACPI_TYPE_METHOD:
 
-		/*
-		 * Print a dot for each method unless we are going to print
-		 * the entire pathname
-		 */
-		if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
-			ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
-		}
-
 		/*
 		 * Set the execution data width (32 or 64) based upon the
 		 * revision number of the parent ACPI table.
@@ -134,6 +122,21 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 		if (info->table_desc->pointer->revision == 1) {
 			node->flags |= ANOBJ_DATA_WIDTH_32;
 		}
+#ifdef ACPI_INIT_PARSE_METHODS
+		/*
+		 * Note 11/2005: Removed this code to parse all methods during table
+		 * load because it causes problems if there are any errors during the
+		 * parse. Also, it seems like overkill and we probably don't want to
+		 * abort a table load because of an issue with a single method.
+		 */
+
+		/*
+		 * Print a dot for each method unless we are going to print
+		 * the entire pathname
+		 */
+		if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
+			ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
+		}
 
 		/*
 		 * Always parse methods to detect errors, we will delete
@@ -141,15 +144,11 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
 		 */
 		status = acpi_ds_parse_method(obj_handle);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "\n+Method %p [%4.4s] - parse failure, %s\n",
-					  obj_handle,
-					  acpi_ut_get_node_name(obj_handle),
-					  acpi_format_exception(status)));
+			ACPI_REPORT_ERROR(("\n+Method %p [%4.4s] - parse failure, %s\n", obj_handle, acpi_ut_get_node_name(obj_handle), acpi_format_exception(status)));
 
 			/* This parse failed, but we will continue parsing more methods */
 		}
-
+#endif
 		info->method_count++;
 		break;
 
@@ -207,7 +206,7 @@ acpi_ds_initialize_objects(struct acpi_table_desc * table_desc,
 	status = acpi_walk_namespace(ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX,
 				     acpi_ds_init_one_object, &info, NULL);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "walk_namespace failed, %s\n",
+		ACPI_REPORT_ERROR(("walk_namespace failed, %s\n",
 				   acpi_format_exception(status)));
 	}
 

drivers/acpi/dispatcher/dsmthdat.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -260,9 +260,7 @@ acpi_ds_method_data_get_node(u16 opcode,
 	case AML_LOCAL_OP:
 
 		if (index > ACPI_METHOD_MAX_LOCAL) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Local index %d is invalid (max %d)\n",
-					  index, ACPI_METHOD_MAX_LOCAL));
+			ACPI_REPORT_ERROR(("Local index %d is invalid (max %d)\n", index, ACPI_METHOD_MAX_LOCAL));
 			return_ACPI_STATUS(AE_AML_INVALID_INDEX);
 		}
 
@@ -274,8 +272,7 @@ acpi_ds_method_data_get_node(u16 opcode,
 	case AML_ARG_OP:
 
 		if (index > ACPI_METHOD_MAX_ARG) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Arg index %d is invalid (max %d)\n",
+			ACPI_REPORT_ERROR(("Arg index %d is invalid (max %d)\n",
 					   index, ACPI_METHOD_MAX_ARG));
 			return_ACPI_STATUS(AE_AML_INVALID_INDEX);
 		}
@@ -286,8 +283,7 @@ acpi_ds_method_data_get_node(u16 opcode,
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Opcode %d is invalid\n",
-				  opcode));
+		ACPI_REPORT_ERROR(("Opcode %d is invalid\n", opcode));
 		return_ACPI_STATUS(AE_AML_BAD_OPCODE);
 	}
 
@@ -378,8 +374,7 @@ acpi_ds_method_data_get_value(u16 opcode,
 	/* Validate the object descriptor */
 
 	if (!dest_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null object descriptor pointer\n"));
+		ACPI_REPORT_ERROR(("Null object descriptor pointer\n"));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
@@ -424,23 +419,18 @@ acpi_ds_method_data_get_value(u16 opcode,
 			switch (opcode) {
 			case AML_ARG_OP:
 
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Uninitialized Arg[%d] at node %p\n",
-						  index, node));
+				ACPI_REPORT_ERROR(("Uninitialized Arg[%d] at node %p\n", index, node));
 
 				return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG);
 
 			case AML_LOCAL_OP:
 
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Uninitialized Local[%d] at node %p\n",
-						  index, node));
+				ACPI_REPORT_ERROR(("Uninitialized Local[%d] at node %p\n", index, node));
 
 				return_ACPI_STATUS(AE_AML_UNINITIALIZED_LOCAL);
 
 			default:
-				ACPI_REPORT_ERROR(("Not Arg/Local opcode: %X\n",
-						   opcode));
+				ACPI_REPORT_ERROR(("Not a Arg/Local opcode: %X\n", opcode));
 				return_ACPI_STATUS(AE_AML_INTERNAL);
 			}
 	}

drivers/acpi/dispatcher/dsobject.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -51,6 +51,7 @@
 #define _COMPONENT          ACPI_DISPATCHER
 ACPI_MODULE_NAME("dsobject")
 
+/* Local prototypes */
 static acpi_status
 acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
 			      union acpi_parse_object *op,
@@ -85,7 +86,7 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
 	*obj_desc_ptr = NULL;
 	if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
 		/*
-		 * This is an named object reference.  If this name was
+		 * This is a named object reference. If this name was
 		 * previously looked up in the namespace, it was stored in this op.
 		 * Otherwise, go ahead and look it up now
 		 */
@@ -96,18 +97,48 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
 						ACPI_IMODE_EXECUTE,
 						ACPI_NS_SEARCH_PARENT |
 						ACPI_NS_DONT_OPEN_SCOPE, NULL,
-						(struct acpi_namespace_node **)
-						&(op->common.node));
-
+						ACPI_CAST_INDIRECT_PTR(struct
+								       acpi_namespace_node,
+								       &(op->
+									 common.
+									 node)));
 			if (ACPI_FAILURE(status)) {
-				ACPI_REPORT_NSERROR(op->common.value.string,
-						    status);
+				/* Check if we are resolving a named reference within a package */
+
+				if ((status == AE_NOT_FOUND)
+				    && (acpi_gbl_enable_interpreter_slack)
+				    &&
+				    ((op->common.parent->common.aml_opcode ==
+				      AML_PACKAGE_OP)
+				     || (op->common.parent->common.aml_opcode ==
+					 AML_VAR_PACKAGE_OP))) {
+					/*
+					 * We didn't find the target and we are populating elements
+					 * of a package - ignore if slack enabled. Some ASL code
+					 * contains dangling invalid references in packages and
+					 * expects that no exception will be issued. Leave the
+					 * element as a null element. It cannot be used, but it
+					 * can be overwritten by subsequent ASL code - this is
+					 * typically the case.
+					 */
+					ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+							  "Ignoring unresolved reference in package [%4.4s]\n",
+							  walk_state->
+							  scope_info->scope.
+							  node->name.ascii));
+
+					return_ACPI_STATUS(AE_OK);
+				} else {
+					ACPI_REPORT_NSERROR(op->common.value.
+							    string, status);
+				}
+
 				return_ACPI_STATUS(status);
 			}
 		}
 	}
 
-	/* Create and init the internal ACPI object */
+	/* Create and init a new internal ACPI object */
 
 	obj_desc = acpi_ut_create_internal_object((acpi_ps_get_opcode_info
 						   (op->common.aml_opcode))->
@@ -157,13 +188,13 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
 
 	ACPI_FUNCTION_TRACE("ds_build_internal_buffer_obj");
 
-	obj_desc = *obj_desc_ptr;
-	if (obj_desc) {
 	/*
-		 * We are evaluating a Named buffer object "Name (xxxx, Buffer)".
-		 * The buffer object already exists (from the NS node)
+	 * If we are evaluating a Named buffer object "Name (xxxx, Buffer)".
+	 * The buffer object already exists (from the NS node), otherwise it must
+	 * be created.
 	 */
-	} else {
+	obj_desc = *obj_desc_ptr;
+	if (!obj_desc) {
 		/* Create a new buffer object */
 
 		obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
@@ -183,10 +214,7 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
 	byte_list = arg->named.next;
 	if (byte_list) {
 		if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Expecting bytelist, got AML opcode %X in op %p\n",
-					  byte_list->common.aml_opcode,
-					  byte_list));
+			ACPI_REPORT_ERROR(("Expecting bytelist, got AML opcode %X in op %p\n", byte_list->common.aml_opcode, byte_list));
 
 			acpi_ut_remove_reference(obj_desc);
 			return (AE_TYPE);
@@ -259,7 +287,7 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 	union acpi_operand_object *obj_desc = NULL;
 	u32 package_list_length;
 	acpi_status status = AE_OK;
-	u32 i;
+	acpi_native_uint i;
 
 	ACPI_FUNCTION_TRACE("ds_build_internal_package_obj");
 
@@ -271,13 +299,12 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 		parent = parent->common.parent;
 	}
 
-	obj_desc = *obj_desc_ptr;
-	if (obj_desc) {
 	/*
-		 * We are evaluating a Named package object "Name (xxxx, Package)".
-		 * Get the existing package object from the NS node
+	 * If we are evaluating a Named package object "Name (xxxx, Package)",
+	 * the package object already exists, otherwise it must be created.
 	 */
-	} else {
+	obj_desc = *obj_desc_ptr;
+	if (!obj_desc) {
 		obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
 		*obj_desc_ptr = obj_desc;
 		if (!obj_desc) {
@@ -291,11 +318,9 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 
 	/* Count the number of items in the package list */
 
-	package_list_length = 0;
 	arg = op->common.value.arg;
 	arg = arg->common.next;
-	while (arg) {
-		package_list_length++;
+	for (package_list_length = 0; arg; package_list_length++) {
 		arg = arg->common.next;
 	}
 
@@ -322,12 +347,11 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 	}
 
 	/*
-	 * Now init the elements of the package
+	 * Initialize all elements of the package
 	 */
-	i = 0;
 	arg = op->common.value.arg;
 	arg = arg->common.next;
-	while (arg) {
+	for (i = 0; arg; i++) {
 		if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
 			/* Object (package or buffer) is already built */
 
@@ -340,8 +364,6 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 							       package.
 							       elements[i]);
 		}
-
-		i++;
 		arg = arg->common.next;
 	}
 
@@ -518,9 +540,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 
 			default:
 
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Unknown constant opcode %X\n",
-						  opcode));
+				ACPI_REPORT_ERROR(("Unknown constant opcode %X\n", opcode));
 				status = AE_AML_OPERAND_TYPE;
 				break;
 			}
@@ -535,8 +555,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 			break;
 
 		default:
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Unknown Integer type %X\n",
+			ACPI_REPORT_ERROR(("Unknown Integer type %X\n",
 					   op_info->type));
 			status = AE_AML_OPERAND_TYPE;
 			break;
@@ -615,8 +634,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 
 	default:
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unimplemented data type: %X\n",
+		ACPI_REPORT_ERROR(("Unimplemented data type: %X\n",
 				   ACPI_GET_OBJECT_TYPE(obj_desc)));
 
 		status = AE_AML_OPERAND_TYPE;

drivers/acpi/dispatcher/dsopcode.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -413,9 +413,7 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 	/* Host object must be a Buffer */
 
 	if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Target of Create Field is not a Buffer object - %s\n",
-				  acpi_ut_get_object_type_name(buffer_desc)));
+		ACPI_REPORT_ERROR(("Target of Create Field is not a Buffer object - %s\n", acpi_ut_get_object_type_name(buffer_desc)));
 
 		status = AE_AML_OPERAND_TYPE;
 		goto cleanup;
@@ -427,8 +425,7 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 	 * after resolution in acpi_ex_resolve_operands().
 	 */
 	if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "(%s) destination not a NS Node [%s]\n",
+		ACPI_REPORT_ERROR(("(%s) destination not a NS Node [%s]\n",
 				   acpi_ps_get_opcode_name(aml_opcode),
 				   acpi_ut_get_descriptor_name(result_desc)));
 
@@ -453,8 +450,7 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 		/* Must have a valid (>0) bit count */
 
 		if (bit_count == 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Attempt to create_field of length 0\n"));
+			ACPI_REPORT_ERROR(("Attempt to create_field of length 0\n"));
 			status = AE_AML_OPERAND_VALUE;
 			goto cleanup;
 		}
@@ -507,8 +503,7 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 
 	default:
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown field creation opcode %02x\n",
+		ACPI_REPORT_ERROR(("Unknown field creation opcode %02x\n",
 				   aml_opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
@@ -517,13 +512,7 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
 	/* Entire field must fit within the current length of the buffer */
 
 	if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Field [%4.4s] size %d exceeds Buffer [%4.4s] size %d (bits)\n",
-				  acpi_ut_get_node_name(result_desc),
-				  bit_offset + bit_count,
-				  acpi_ut_get_node_name(buffer_desc->buffer.
-							node),
-				  8 * (u32) buffer_desc->buffer.length));
+		ACPI_REPORT_ERROR(("Field [%4.4s] size %d exceeds Buffer [%4.4s] size %d (bits)\n", acpi_ut_get_node_name(result_desc), bit_offset + bit_count, acpi_ut_get_node_name(buffer_desc->buffer.node), 8 * (u32) buffer_desc->buffer.length));
 		status = AE_AML_BUFFER_LIMIT;
 		goto cleanup;
 	}
@@ -629,9 +618,10 @@ acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
 			   "after acpi_ex_resolve_operands");
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(%s) bad operand(s) (%X)\n",
+		ACPI_REPORT_ERROR(("(%s) bad operand(s) (%X)\n",
 				   acpi_ps_get_opcode_name(op->common.
-							  aml_opcode), status));
+							   aml_opcode),
+				   status));
 
 		return_ACPI_STATUS(status);
 	}
@@ -1155,8 +1145,7 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
 
 	default:
 
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown control opcode=%X Op=%p\n",
+		ACPI_REPORT_ERROR(("Unknown control opcode=%X Op=%p\n",
 				   op->common.aml_opcode, op));
 
 		status = AE_AML_BAD_OPCODE;

drivers/acpi/dispatcher/dsutils.c

@@ -5,7 +5,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -176,8 +176,8 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 	/* Must have both an Op and a Result Object */
 
 	if (!op) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null Op\n"));
-		return_VALUE(TRUE);
+		ACPI_REPORT_ERROR(("Null Op\n"));
+		return_UINT8(TRUE);
 	}
 
 	/*
@@ -208,7 +208,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 				  "At Method level, result of [%s] not used\n",
 				  acpi_ps_get_opcode_name(op->common.
 							  aml_opcode)));
-		return_VALUE(FALSE);
+		return_UINT8(FALSE);
 	}
 
 	/* Get info on the parent. The root_op is AML_SCOPE */
@@ -216,9 +216,8 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 	parent_info =
 	    acpi_ps_get_opcode_info(op->common.parent->common.aml_opcode);
 	if (parent_info->class == AML_CLASS_UNKNOWN) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown parent opcode. Op=%p\n", op));
-		return_VALUE(FALSE);
+		ACPI_REPORT_ERROR(("Unknown parent opcode Op=%p\n", op));
+		return_UINT8(FALSE);
 	}
 
 	/*
@@ -304,7 +303,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 			  acpi_ps_get_opcode_name(op->common.parent->common.
 						  aml_opcode), op));
 
-	return_VALUE(TRUE);
+	return_UINT8(TRUE);
 
       result_not_used:
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
@@ -313,7 +312,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
 			  acpi_ps_get_opcode_name(op->common.parent->common.
 						  aml_opcode), op));
 
-	return_VALUE(FALSE);
+	return_UINT8(FALSE);
 }
 
 /*******************************************************************************
@@ -344,7 +343,7 @@ acpi_ds_delete_result_if_not_used(union acpi_parse_object *op,
 	ACPI_FUNCTION_TRACE_PTR("ds_delete_result_if_not_used", result_obj);
 
 	if (!op) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null Op\n"));
+		ACPI_REPORT_ERROR(("Null Op\n"));
 		return_VOID;
 	}
 
@@ -616,7 +615,7 @@ acpi_ds_create_operand(struct acpi_walk_state *walk_state,
 
 		if (op_info->flags & AML_HAS_RETVAL) {
 			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-					  "Argument previously created, already stacked \n"));
+					  "Argument previously created, already stacked\n"));
 
 			ACPI_DEBUGGER_EXEC(acpi_db_display_argument_object
 					   (walk_state->
@@ -635,10 +634,7 @@ acpi_ds_create_operand(struct acpi_walk_state *walk_state,
 				 * Only error is underflow, and this indicates
 				 * a missing or null operand!
 				 */
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Missing or null operand, %s\n",
-						  acpi_format_exception
-						  (status)));
+				ACPI_REPORT_ERROR(("Missing or null operand, %s\n", acpi_format_exception(status)));
 				return_ACPI_STATUS(status);
 			}
 		} else {
@@ -730,7 +726,7 @@ acpi_ds_create_operands(struct acpi_walk_state *walk_state,
 	 */
 	(void)acpi_ds_obj_stack_pop_and_delete(arg_count, walk_state);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "While creating Arg %d - %s\n",
+	ACPI_REPORT_ERROR(("While creating Arg %d - %s\n",
 			   (arg_count + 1), acpi_format_exception(status)));
 	return_ACPI_STATUS(status);
 }

drivers/acpi/dispatcher/dswexec.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -100,9 +100,7 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
 	if (result_obj) {
 		status = acpi_ds_result_pop(&obj_desc, walk_state);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not get result from predicate evaluation, %s\n",
-					  acpi_format_exception(status)));
+			ACPI_REPORT_ERROR(("Could not get result from predicate evaluation, %s\n", acpi_format_exception(status)));
 
 			return_ACPI_STATUS(status);
 		}
@@ -123,8 +121,7 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
 	}
 
 	if (!obj_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No predicate obj_desc=%p State=%p\n",
+		ACPI_REPORT_ERROR(("No predicate obj_desc=%p State=%p\n",
 				   obj_desc, walk_state));
 
 		return_ACPI_STATUS(AE_AML_NO_OPERAND);
@@ -140,10 +137,7 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
 	}
 
 	if (ACPI_GET_OBJECT_TYPE(local_obj_desc) != ACPI_TYPE_INTEGER) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Bad predicate (not an integer) obj_desc=%p State=%p Type=%X\n",
-				  obj_desc, walk_state,
-				  ACPI_GET_OBJECT_TYPE(obj_desc)));
+		ACPI_REPORT_ERROR(("Bad predicate (not an integer) obj_desc=%p State=%p Type=%X\n", obj_desc, walk_state, ACPI_GET_OBJECT_TYPE(obj_desc)));
 
 		status = AE_AML_OPERAND_TYPE;
 		goto cleanup;
@@ -314,12 +308,13 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
 
 	case AML_CLASS_EXECUTE:
 	case AML_CLASS_CREATE:
-
 		/*
 		 * Most operators with arguments.
 		 * Start a new result/operand state
 		 */
+		if (walk_state->opcode != AML_CREATE_FIELD_OP) {
 			status = acpi_ds_result_stack_push(walk_state);
+		}
 		break;
 
 	default:
@@ -361,7 +356,7 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 	op_class = walk_state->op_info->class;
 
 	if (op_class == AML_CLASS_UNKNOWN) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown opcode %X\n",
+		ACPI_REPORT_ERROR(("Unknown opcode %X\n",
 				   op->common.aml_opcode));
 		return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
 	}
@@ -452,12 +447,7 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 				walk_state->operands[1]->reference.offset)) {
 				status = AE_OK;
 			} else {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "[%s]: Could not resolve operands, %s\n",
-						  acpi_ps_get_opcode_name
-						  (walk_state->opcode),
-						  acpi_format_exception
-						  (status)));
+				ACPI_REPORT_ERROR(("[%s]: Could not resolve operands, %s\n", acpi_ps_get_opcode_name(walk_state->opcode), acpi_format_exception(status)));
 			}
 		}
 
@@ -676,8 +666,8 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 
 		case AML_TYPE_UNDEFINED:
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Undefined opcode type Op=%p\n", op));
+			ACPI_REPORT_ERROR(("Undefined opcode type Op=%p\n",
+					   op));
 			return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
 
 		case AML_TYPE_BOGUS:
@@ -689,10 +679,7 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 
 		default:
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p\n",
-					  op_class, op_type,
-					  op->common.aml_opcode, op));
+			ACPI_REPORT_ERROR(("Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p\n", op_class, op_type, op->common.aml_opcode, op));
 
 			status = AE_NOT_IMPLEMENTED;
 			break;
@@ -723,20 +710,6 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 
       cleanup:
 
-	/* Invoke exception handler on error */
-
-	if (ACPI_FAILURE(status) &&
-	    acpi_gbl_exception_handler && !(status & AE_CODE_CONTROL)) {
-		acpi_ex_exit_interpreter();
-		status = acpi_gbl_exception_handler(status,
-						    walk_state->method_node->
-						    name.integer,
-						    walk_state->opcode,
-						    walk_state->aml_offset,
-						    NULL);
-		(void)acpi_ex_enter_interpreter();
-	}
-
 	if (walk_state->result_obj) {
 		/* Break to debugger to display result */
 
@@ -758,18 +731,14 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 	}
 #endif
 
-	/* Always clear the object stack */
-
-	walk_state->num_operands = 0;
-
-#ifdef ACPI_DISASSEMBLER
-
-	/* On error, display method locals/args */
+	/* Invoke exception handler on error */
 
 	if (ACPI_FAILURE(status)) {
-		acpi_dm_dump_method_info(status, walk_state, op);
+		status = acpi_ds_method_error(status, walk_state);
 	}
-#endif
 
+	/* Always clear the object stack */
+
+	walk_state->num_operands = 0;
 	return_ACPI_STATUS(status);
 }

drivers/acpi/dispatcher/dswscope.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -107,14 +107,14 @@ acpi_ds_scope_stack_push(struct acpi_namespace_node *node,
 	if (!node) {
 		/* Invalid scope   */
 
-		ACPI_REPORT_ERROR(("ds_scope_stack_push: null scope passed\n"));
+		ACPI_REPORT_ERROR(("Null scope parameter\n"));
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	/* Make sure object type is valid */
 
 	if (!acpi_ut_valid_object_type(type)) {
-		ACPI_REPORT_WARNING(("ds_scope_stack_push: Invalid object type: 0x%X\n", type));
+		ACPI_REPORT_WARNING(("Invalid object type: 0x%X\n", type));
 	}
 
 	/* Allocate a new scope object */

drivers/acpi/dispatcher/dswstate.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -92,15 +92,13 @@ acpi_ds_result_remove(union acpi_operand_object **object,
 
 	state = walk_state->results;
 	if (!state) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No result object pushed! State=%p\n",
+		ACPI_REPORT_ERROR(("No result object pushed! State=%p\n",
 				   walk_state));
 		return (AE_NOT_EXIST);
 	}
 
 	if (index >= ACPI_OBJ_MAX_OPERAND) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Index out of range: %X State=%p Num=%X\n",
+		ACPI_REPORT_ERROR(("Index out of range: %X State=%p Num=%X\n",
 				   index, walk_state,
 				   state->results.num_results));
 	}
@@ -108,8 +106,7 @@ acpi_ds_result_remove(union acpi_operand_object **object,
 	/* Check for a valid result object */
 
 	if (!state->results.obj_desc[index]) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null operand! State=%p #Ops=%X, Index=%X\n",
+		ACPI_REPORT_ERROR(("Null operand! State=%p #Ops=%X, Index=%X\n",
 				   walk_state, state->results.num_results,
 				   index));
 		return (AE_AML_NO_RETURN_VALUE);
@@ -163,8 +160,7 @@ acpi_ds_result_pop(union acpi_operand_object ** object,
 	}
 
 	if (!state->results.num_results) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Result stack is empty! State=%p\n",
+		ACPI_REPORT_ERROR(("Result stack is empty! State=%p\n",
 				   walk_state));
 		return (AE_AML_NO_RETURN_VALUE);
 	}
@@ -192,8 +188,7 @@ acpi_ds_result_pop(union acpi_operand_object ** object,
 		}
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-			  "No result objects! State=%p\n", walk_state));
+	ACPI_REPORT_ERROR(("No result objects! State=%p\n", walk_state));
 	return (AE_AML_NO_RETURN_VALUE);
 }
 
@@ -222,15 +217,14 @@ acpi_ds_result_pop_from_bottom(union acpi_operand_object ** object,
 
 	state = walk_state->results;
 	if (!state) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Warning: No result object pushed! State=%p\n",
+		ACPI_REPORT_ERROR(("No result object pushed! State=%p\n",
 				   walk_state));
 		return (AE_NOT_EXIST);
 	}
 
 	if (!state->results.num_results) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No result objects! State=%p\n", walk_state));
+		ACPI_REPORT_ERROR(("No result objects! State=%p\n",
+				   walk_state));
 		return (AE_AML_NO_RETURN_VALUE);
 	}
 
@@ -250,8 +244,7 @@ acpi_ds_result_pop_from_bottom(union acpi_operand_object ** object,
 	/* Check for a valid result object */
 
 	if (!*object) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null operand! State=%p #Ops=%X Index=%X\n",
+		ACPI_REPORT_ERROR(("Null operand! State=%p #Ops=%X Index=%X\n",
 				   walk_state, state->results.num_results,
 				   (u32) index));
 		return (AE_AML_NO_RETURN_VALUE);
@@ -293,16 +286,12 @@ acpi_ds_result_push(union acpi_operand_object * object,
 	}
 
 	if (state->results.num_results == ACPI_OBJ_NUM_OPERANDS) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Result stack overflow: Obj=%p State=%p Num=%X\n",
-				  object, walk_state,
-				  state->results.num_results));
+		ACPI_REPORT_ERROR(("Result stack overflow: Obj=%p State=%p Num=%X\n", object, walk_state, state->results.num_results));
 		return (AE_STACK_OVERFLOW);
 	}
 
 	if (!object) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null Object! Obj=%p State=%p Num=%X\n",
+		ACPI_REPORT_ERROR(("Null Object! Obj=%p State=%p Num=%X\n",
 				   object, walk_state,
 				   state->results.num_results));
 		return (AE_BAD_PARAMETER);
@@ -413,10 +402,7 @@ acpi_ds_obj_stack_push(void *object, struct acpi_walk_state * walk_state)
 	/* Check for stack overflow */
 
 	if (walk_state->num_operands >= ACPI_OBJ_NUM_OPERANDS) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "overflow! Obj=%p State=%p #Ops=%X\n",
-				  object, walk_state,
-				  walk_state->num_operands));
+		ACPI_REPORT_ERROR(("Object stack overflow! Obj=%p State=%p #Ops=%X\n", object, walk_state, walk_state->num_operands));
 		return (AE_STACK_OVERFLOW);
 	}
 
@@ -460,10 +446,7 @@ acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state * walk_state)
 		/* Check for stack underflow */
 
 		if (walk_state->num_operands == 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Underflow! Count=%X State=%p #Ops=%X\n",
-					  pop_count, walk_state,
-					  walk_state->num_operands));
+			ACPI_REPORT_ERROR(("Object stack underflow! Count=%X State=%p #Ops=%X\n", pop_count, walk_state, walk_state->num_operands));
 			return (AE_STACK_UNDERFLOW);
 		}
 
@@ -506,10 +489,7 @@ acpi_ds_obj_stack_pop_and_delete(u32 pop_count,
 		/* Check for stack underflow */
 
 		if (walk_state->num_operands == 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Underflow! Count=%X State=%p #Ops=%X\n",
-					  pop_count, walk_state,
-					  walk_state->num_operands));
+			ACPI_REPORT_ERROR(("Object stack underflow! Count=%X State=%p #Ops=%X\n", pop_count, walk_state, walk_state->num_operands));
 			return (AE_STACK_UNDERFLOW);
 		}
 
@@ -826,15 +806,13 @@ void acpi_ds_delete_walk_state(struct acpi_walk_state *walk_state)
 	}
 
 	if (walk_state->data_type != ACPI_DESC_TYPE_WALK) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "%p is not a valid walk state\n",
+		ACPI_REPORT_ERROR(("%p is not a valid walk state\n",
 				   walk_state));
 		return;
 	}
 
 	if (walk_state->parser_state.scope) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "%p walk still has a scope list\n",
+		ACPI_REPORT_ERROR(("%p walk still has a scope list\n",
 				   walk_state));
 	}
 
@@ -894,25 +872,18 @@ acpi_ds_result_insert(void *object,
 
 	state = walk_state->results;
 	if (!state) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No result object pushed! State=%p\n",
+		ACPI_REPORT_ERROR(("No result object pushed! State=%p\n",
 				   walk_state));
 		return (AE_NOT_EXIST);
 	}
 
 	if (index >= ACPI_OBJ_NUM_OPERANDS) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Index out of range: %X Obj=%p State=%p Num=%X\n",
-				  index, object, walk_state,
-				  state->results.num_results));
+		ACPI_REPORT_ERROR(("Index out of range: %X Obj=%p State=%p Num=%X\n", index, object, walk_state, state->results.num_results));
 		return (AE_BAD_PARAMETER);
 	}
 
 	if (!object) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null Object! Index=%X Obj=%p State=%p Num=%X\n",
-				  index, object, walk_state,
-				  state->results.num_results));
+		ACPI_REPORT_ERROR(("Null Object! Index=%X Obj=%p State=%p Num=%X\n", index, object, walk_state, state->results.num_results));
 		return (AE_BAD_PARAMETER);
 	}
 
@@ -986,9 +957,7 @@ acpi_ds_obj_stack_pop_object(union acpi_operand_object **object,
 	/* Check for stack underflow */
 
 	if (walk_state->num_operands == 0) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Missing operand/stack empty! State=%p #Ops=%X\n",
-				  walk_state, walk_state->num_operands));
+		ACPI_REPORT_ERROR(("Missing operand/stack empty! State=%p #Ops=%X\n", walk_state, walk_state->num_operands));
 		*object = NULL;
 		return (AE_AML_NO_OPERAND);
 	}
@@ -1000,8 +969,7 @@ acpi_ds_obj_stack_pop_object(union acpi_operand_object **object,
 	/* Check for a valid operand */
 
 	if (!walk_state->operands[walk_state->num_operands]) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Null operand! State=%p #Ops=%X\n",
+		ACPI_REPORT_ERROR(("Null operand! State=%p #Ops=%X\n",
 				   walk_state, walk_state->num_operands));
 		*object = NULL;
 		return (AE_AML_NO_OPERAND);

drivers/acpi/events/evevent.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -73,7 +73,7 @@ acpi_status acpi_ev_initialize_events(void)
 	/* Make sure we have ACPI tables */
 
 	if (!acpi_gbl_DSDT) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN, "No ACPI tables present!\n"));
+		ACPI_REPORT_WARNING(("No ACPI tables present!\n"));
 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
 	}
 
@@ -98,6 +98,48 @@ acpi_status acpi_ev_initialize_events(void)
 	return_ACPI_STATUS(status);
 }
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_install_fadt_gpes
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Completes initialization of the FADT-defined GPE blocks
+ *              (0 and 1). This causes the _PRW methods to be run, so the HW
+ *              must be fully initialized at this point, including global lock
+ *              support.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ev_install_fadt_gpes(void)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE("ev_install_fadt_gpes");
+
+	/* Namespace must be locked */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/* FADT GPE Block 0 */
+
+	(void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device,
+					   acpi_gbl_gpe_fadt_blocks[0]);
+
+	/* FADT GPE Block 1 */
+
+	(void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device,
+					   acpi_gbl_gpe_fadt_blocks[1]);
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+	return_ACPI_STATUS(AE_OK);
+}
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ev_install_xrupt_handlers

drivers/acpi/events/evgpe.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -372,14 +372,14 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 
 u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
 {
+	acpi_status status;
+	struct acpi_gpe_block_info *gpe_block;
+	struct acpi_gpe_register_info *gpe_register_info;
 	u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
 	u8 enabled_status_byte;
-	struct acpi_gpe_register_info *gpe_register_info;
 	u32 status_reg;
 	u32 enable_reg;
-	u32 flags;
-	acpi_status status;
-	struct acpi_gpe_block_info *gpe_block;
+	acpi_native_uint flags;
 	acpi_native_uint i;
 	acpi_native_uint j;
 
@@ -599,8 +599,10 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 	    ACPI_GPE_EDGE_TRIGGERED) {
 		status = acpi_hw_clear_gpe(gpe_event_info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
-			return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+			ACPI_REPORT_ERROR(("%s, Unable to clear GPE[%2X]\n",
+					   acpi_format_exception(status),
+					   gpe_number));
+			return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 		}
 	}
 
@@ -637,8 +639,8 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		    ACPI_GPE_LEVEL_TRIGGERED) {
 			status = acpi_hw_clear_gpe(gpe_event_info);
 			if (ACPI_FAILURE(status)) {
-				ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
-				return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+				ACPI_REPORT_ERROR(("%s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
+				return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 			}
 		}
 		break;
@@ -651,8 +653,10 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 */
 		status = acpi_ev_disable_gpe(gpe_event_info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n", acpi_format_exception(status), gpe_number));
-			return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+			ACPI_REPORT_ERROR(("%s, Unable to disable GPE[%2X]\n",
+					   acpi_format_exception(status),
+					   gpe_number));
+			return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 		}
 
 		/*
@@ -663,7 +667,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 						     acpi_ev_asynch_execute_gpe_method,
 						     gpe_event_info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to queue handler for GPE[%2X] - event disabled\n", acpi_format_exception(status), gpe_number));
+			ACPI_REPORT_ERROR(("%s, Unable to queue handler for GPE[%2X] - event disabled\n", acpi_format_exception(status), gpe_number));
 		}
 		break;
 
@@ -671,7 +675,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 
 		/* No handler or method to run! */
 
-		ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: No handler or method for GPE[%2X], disabling event\n", gpe_number));
+		ACPI_REPORT_ERROR(("No handler or method for GPE[%2X], disabling event\n", gpe_number));
 
 		/*
 		 * Disable the GPE.  The GPE will remain disabled until the ACPI
@@ -679,13 +683,15 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 		 */
 		status = acpi_ev_disable_gpe(gpe_event_info);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n", acpi_format_exception(status), gpe_number));
-			return_VALUE(ACPI_INTERRUPT_NOT_HANDLED);
+			ACPI_REPORT_ERROR(("%s, Unable to disable GPE[%2X]\n",
+					   acpi_format_exception(status),
+					   gpe_number));
+			return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 		}
 		break;
 	}
 
-	return_VALUE(ACPI_INTERRUPT_HANDLED);
+	return_UINT32(ACPI_INTERRUPT_HANDLED);
 }
 
 #ifdef ACPI_GPE_NOTIFY_CHECK

drivers/acpi/events/evmisc.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -542,9 +542,7 @@ void acpi_ev_terminate(void)
 		for (i = 0; i < ACPI_NUM_FIXED_EVENTS; i++) {
 			status = acpi_disable_event((u32) i, 0);
 			if (ACPI_FAILURE(status)) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "Could not disable fixed event %d\n",
-						  (u32) i));
+				ACPI_REPORT_ERROR(("Could not disable fixed event %d\n", (u32) i));
 			}
 		}
 
@@ -556,8 +554,7 @@ void acpi_ev_terminate(void)
 
 		status = acpi_ev_remove_sci_handler();
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not remove SCI handler\n"));
+			ACPI_REPORT_ERROR(("Could not remove SCI handler\n"));
 		}
 	}
 
@@ -570,8 +567,7 @@ void acpi_ev_terminate(void)
 	if (acpi_gbl_original_mode == ACPI_SYS_MODE_LEGACY) {
 		status = acpi_disable();
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-					  "acpi_disable failed\n"));
+			ACPI_REPORT_WARNING(("acpi_disable failed\n"));
 		}
 	}
 	return_VOID;

drivers/acpi/events/evregion.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -295,8 +295,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 
 	handler_desc = region_obj->region.handler;
 	if (!handler_desc) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "No handler for Region [%4.4s] (%p) [%s]\n",
+		ACPI_REPORT_ERROR(("No handler for Region [%4.4s] (%p) [%s]\n",
 				   acpi_ut_get_node_name(region_obj->region.
 							 node), region_obj,
 				   acpi_ut_get_region_name(region_obj->region.
@@ -317,12 +316,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		if (!region_setup) {
 			/* No initialization routine, exit with error */
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "No init routine for region(%p) [%s]\n",
-					  region_obj,
-					  acpi_ut_get_region_name(region_obj->
-								  region.
-								  space_id)));
+			ACPI_REPORT_ERROR(("No init routine for region(%p) [%s]\n", region_obj, acpi_ut_get_region_name(region_obj->region.space_id)));
 			return_ACPI_STATUS(AE_NOT_EXIST);
 		}
 
@@ -347,8 +341,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		/* Check for failure of the Region Setup */
 
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Region Init: %s [%s]\n",
+			ACPI_REPORT_ERROR(("Region Initialization: %s [%s]\n",
 					   acpi_format_exception(status),
 					   acpi_ut_get_region_name(region_obj->
 								   region.
@@ -501,12 +494,7 @@ acpi_ev_detach_region(union acpi_operand_object *region_obj,
 
 			status = acpi_ev_execute_reg_method(region_obj, 0);
 			if (ACPI_FAILURE(status)) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "%s from region _REG, [%s]\n",
-						  acpi_format_exception(status),
-						  acpi_ut_get_region_name
-						  (region_obj->region.
-						   space_id)));
+				ACPI_REPORT_ERROR(("%s from region _REG, [%s]\n", acpi_format_exception(status), acpi_ut_get_region_name(region_obj->region.space_id)));
 			}
 
 			if (acpi_ns_is_locked) {
@@ -528,12 +516,7 @@ acpi_ev_detach_region(union acpi_operand_object *region_obj,
 			/* Init routine may fail, Just ignore errors */
 
 			if (ACPI_FAILURE(status)) {
-				ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-						  "%s from region init, [%s]\n",
-						  acpi_format_exception(status),
-						  acpi_ut_get_region_name
-						  (region_obj->region.
-						   space_id)));
+				ACPI_REPORT_ERROR(("%s from region init, [%s]\n", acpi_format_exception(status), acpi_ut_get_region_name(region_obj->region.space_id)));
 			}
 
 			region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE);

drivers/acpi/events/evrgnini.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/events/evsci.c

@@ -6,7 +6,7 @@
  ******************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -88,7 +88,7 @@ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context)
 	 */
 	interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
 
-	return_VALUE(interrupt_handled);
+	return_UINT32(interrupt_handled);
 }
 
 /*******************************************************************************
@@ -121,7 +121,7 @@ u32 ACPI_SYSTEM_XFACE acpi_ev_gpe_xrupt_handler(void *context)
 	 */
 	interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
 
-	return_VALUE(interrupt_handled);
+	return_UINT32(interrupt_handled);
 }
 
 /******************************************************************************

drivers/acpi/events/evxface.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -143,8 +143,8 @@ acpi_install_fixed_event_handler(u32 event,
 	if (ACPI_SUCCESS(status))
 		status = acpi_enable_event(event, 0);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "Could not enable fixed event.\n"));
+		ACPI_REPORT_WARNING(("Could not enable fixed event %X\n",
+				     event));
 
 		/* Remove the handler */
 
@@ -204,10 +204,9 @@ acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler)
 	acpi_gbl_fixed_event_handlers[event].context = NULL;
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "Could not write to fixed event enable register.\n"));
+		ACPI_REPORT_WARNING(("Could not write to fixed event enable register %X\n", event));
 	} else {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X.\n",
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n",
 				  event));
 	}
 
@@ -434,7 +433,7 @@ acpi_remove_notify_handler(acpi_handle device,
 
 	if (device == ACPI_ROOT_OBJECT) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Removing notify handler for ROOT object.\n"));
+				  "Removing notify handler for namespace root object\n"));
 
 		if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
 		     !acpi_gbl_system_notify.handler) ||
@@ -562,7 +561,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device,
 	struct acpi_gpe_event_info *gpe_event_info;
 	struct acpi_handler_info *handler;
 	acpi_status status;
-	u32 flags;
+	acpi_native_uint flags;
 
 	ACPI_FUNCTION_TRACE("acpi_install_gpe_handler");
 
@@ -653,7 +652,7 @@ acpi_remove_gpe_handler(acpi_handle gpe_device,
 	struct acpi_gpe_event_info *gpe_event_info;
 	struct acpi_handler_info *handler;
 	acpi_status status;
-	u32 flags;
+	acpi_native_uint flags;
 
 	ACPI_FUNCTION_TRACE("acpi_remove_gpe_handler");
 

drivers/acpi/events/evxfevnt.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -70,8 +70,7 @@ acpi_status acpi_enable(void)
 	/* Make sure we have the FADT */
 
 	if (!acpi_gbl_FADT) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "No FADT information present!\n"));
+		ACPI_REPORT_WARNING(("No FADT information present!\n"));
 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
 	}
 
@@ -83,7 +82,7 @@ acpi_status acpi_enable(void)
 
 		status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI);
 		if (ACPI_FAILURE(status)) {
-			ACPI_REPORT_ERROR(("Could not transition to ACPI mode.\n"));
+			ACPI_REPORT_ERROR(("Could not transition to ACPI mode\n"));
 			return_ACPI_STATUS(status);
 		}
 
@@ -113,8 +112,7 @@ acpi_status acpi_disable(void)
 	ACPI_FUNCTION_TRACE("acpi_disable");
 
 	if (!acpi_gbl_FADT) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				  "No FADT information present!\n"));
+		ACPI_REPORT_WARNING(("No FADT information present!\n"));
 		return_ACPI_STATUS(AE_NO_ACPI_TABLES);
 	}
 
@@ -127,8 +125,7 @@ acpi_status acpi_disable(void)
 		status = acpi_hw_set_mode(ACPI_SYS_MODE_LEGACY);
 
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Could not exit ACPI mode to legacy mode"));
+			ACPI_REPORT_ERROR(("Could not exit ACPI mode to legacy mode"));
 			return_ACPI_STATUS(status);
 		}
 
@@ -185,8 +182,7 @@ acpi_status acpi_enable_event(u32 event, u32 flags)
 	}
 
 	if (value != 1) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not enable %s event\n",
+		ACPI_REPORT_ERROR(("Could not enable %s event\n",
 				   acpi_ut_get_event_name(event)));
 		return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
 	}
@@ -384,8 +380,7 @@ acpi_status acpi_disable_event(u32 event, u32 flags)
 	}
 
 	if (value != 0) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Could not disable %s events\n",
+		ACPI_REPORT_ERROR(("Could not disable %s events\n",
 				   acpi_ut_get_event_name(event)));
 		return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
 	}
@@ -626,6 +621,13 @@ acpi_install_gpe_block(acpi_handle gpe_device,
 		goto unlock_and_exit;
 	}
 
+	/* Run the _PRW methods and enable the GPEs */
+
+	status = acpi_ev_initialize_gpe_block(node, gpe_block);
+	if (ACPI_FAILURE(status)) {
+		goto unlock_and_exit;
+	}
+
 	/* Get the device_object attached to the node */
 
 	obj_desc = acpi_ns_get_attached_object(node);

drivers/acpi/events/evxfregn.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/executer/exconfig.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -413,9 +413,7 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 	    (!ACPI_STRNCMP(table_ptr->signature,
 			   acpi_gbl_table_data[ACPI_TABLE_SSDT].signature,
 			   acpi_gbl_table_data[ACPI_TABLE_SSDT].sig_length))) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Table has invalid signature [%4.4s], must be SSDT or PSDT\n",
-				  table_ptr->signature));
+		ACPI_REPORT_ERROR(("Table has invalid signature [%4.4s], must be SSDT or PSDT\n", table_ptr->signature));
 		status = AE_BAD_SIGNATURE;
 		goto cleanup;
 	}

drivers/acpi/executer/exconvrt.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -504,18 +504,12 @@ acpi_ex_convert_to_string(union acpi_operand_object * obj_desc,
 		}
 
 		/*
-		 * Perform the conversion.
+		 * Create a new string object and string buffer
 		 * (-1 because of extra separator included in string_length from above)
 		 */
-		string_length--;
-		if (string_length > ACPI_MAX_STRING_CONVERSION) {	/* ACPI limit */
-			return_ACPI_STATUS(AE_AML_STRING_LIMIT);
-		}
-
-		/* Create a new string object and string buffer */
-
 		return_desc =
-		    acpi_ut_create_string_object((acpi_size) string_length);
+		    acpi_ut_create_string_object((acpi_size)
+						 (string_length - 1));
 		if (!return_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
@@ -660,16 +654,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type,
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Unknown Target type ID 0x%X Op %s dest_type %s\n",
-				  GET_CURRENT_ARG_TYPE(walk_state->op_info->
-						       runtime_args),
-				  walk_state->op_info->name,
-				  acpi_ut_get_type_name(destination_type)));
-
-		ACPI_REPORT_ERROR(("Bad Target Type (ARGI): %X\n",
-				   GET_CURRENT_ARG_TYPE(walk_state->op_info->
-							runtime_args)))
+		ACPI_REPORT_ERROR(("Unknown Target type ID 0x%X aml_opcode %X dest_type %s\n", GET_CURRENT_ARG_TYPE(walk_state->op_info->runtime_args), walk_state->opcode, acpi_ut_get_type_name(destination_type)));
 		status = AE_AML_INTERNAL;
 	}
 

drivers/acpi/executer/excreate.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/executer/exfield.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/executer/exfldio.c

@@ -5,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -94,8 +94,7 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc,
 	/* We must have a valid region */
 
 	if (ACPI_GET_OBJECT_TYPE(rgn_desc) != ACPI_TYPE_REGION) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Needed Region, found type %X (%s)\n",
+		ACPI_REPORT_ERROR(("Needed Region, found type %X (%s)\n",
 				   ACPI_GET_OBJECT_TYPE(rgn_desc),
 				   acpi_ut_get_object_type_name(rgn_desc)));
 
@@ -162,31 +161,14 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc,
 			 * than the region itself.  For example, a region of length one
 			 * byte, and a field with Dword access specified.
 			 */
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n",
-					  acpi_ut_get_node_name(obj_desc->
-								common_field.
-								node),
-					  obj_desc->common_field.
-					  access_byte_width,
-					  acpi_ut_get_node_name(rgn_desc->
-								region.node),
-					  rgn_desc->region.length));
+			ACPI_REPORT_ERROR(("Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n", acpi_ut_get_node_name(obj_desc->common_field.node), obj_desc->common_field.access_byte_width, acpi_ut_get_node_name(rgn_desc->region.node), rgn_desc->region.length));
 		}
 
 		/*
 		 * Offset rounded up to next multiple of field width
 		 * exceeds region length, indicate an error
 		 */
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)\n",
-				  acpi_ut_get_node_name(obj_desc->common_field.
-							node),
-				  obj_desc->common_field.base_byte_offset,
-				  field_datum_byte_offset,
-				  obj_desc->common_field.access_byte_width,
-				  acpi_ut_get_node_name(rgn_desc->region.node),
-				  rgn_desc->region.length));
+		ACPI_REPORT_ERROR(("Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)\n", acpi_ut_get_node_name(obj_desc->common_field.node), obj_desc->common_field.base_byte_offset, field_datum_byte_offset, obj_desc->common_field.access_byte_width, acpi_ut_get_node_name(rgn_desc->region.node), rgn_desc->region.length));
 
 		return_ACPI_STATUS(AE_AML_REGION_LIMIT);
 	}
@@ -270,8 +252,7 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
 
 	if (ACPI_FAILURE(status)) {
 		if (status == AE_NOT_IMPLEMENTED) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Region %s(%X) not implemented\n",
+			ACPI_REPORT_ERROR(("Region %s(%X) not implemented\n",
 					   acpi_ut_get_region_name(rgn_desc->
 								   region.
 								   space_id),
@@ -618,8 +599,7 @@ acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc,
 
 		default:
 
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "write_with_update_rule: Unknown update_rule setting: %X\n",
+			ACPI_REPORT_ERROR(("Unknown update_rule value: %X\n",
 					   (obj_desc->common_field.
 					    field_flags &
 					    AML_FIELD_UPDATE_RULE_MASK)));
@@ -677,10 +657,7 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc,
 
 	if (buffer_length <
 	    ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Field size %X (bits) is too large for buffer (%X)\n",
-				  obj_desc->common_field.bit_length,
-				  buffer_length));
+		ACPI_REPORT_ERROR(("Field size %X (bits) is too large for buffer (%X)\n", obj_desc->common_field.bit_length, buffer_length));
 
 		return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
 	}
@@ -792,10 +769,7 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc,
 
 	if (buffer_length <
 	    ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Field size %X (bits) is too large for buffer (%X)\n",
-				  obj_desc->common_field.bit_length,
-				  buffer_length));
+		ACPI_REPORT_ERROR(("Field size %X (bits) is too large for buffer (%X)\n", obj_desc->common_field.bit_length, buffer_length));
 
 		return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
 	}

drivers/acpi/executer/exmutex.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

drivers/acpi/executer/exoparg3.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -119,7 +119,8 @@ acpi_status acpi_ex_opcode_3A_0T_0R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
+				   walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}
@@ -223,8 +224,8 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state)
 			goto cleanup;
 		}
 
-		if (length > 0) {
-			/* Copy the portion requested */
+		if (buffer) {
+			/* We have a buffer, copy the portion requested */
 
 			ACPI_MEMCPY(buffer, operand[0]->string.pointer + index,
 				    length);
@@ -242,7 +243,8 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state)
 
 	default:
 
-		ACPI_REPORT_ERROR(("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
+		ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
+				   walk_state->opcode));
 		status = AE_AML_BAD_OPCODE;
 		goto cleanup;
 	}

drivers/acpi/hardware/hwgpe.c

@@ -6,7 +6,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without