Commit 9ff32fe1 authored by Sebastian Hesselbarth's avatar Sebastian Hesselbarth Committed by David S. Miller

net: pxa168_eth: Remove in-driver PHY mangling

With properly using libphy PHYs now, remove the in-driver PHY
mangling.
Tested-by: default avatarAntoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1a149132
...@@ -177,7 +177,6 @@ ...@@ -177,7 +177,6 @@
#define LINK_UP (1 << 3) #define LINK_UP (1 << 3)
/* Bit definitions for work to be done */ /* Bit definitions for work to be done */
#define WORK_LINK (1 << 0)
#define WORK_TX_DONE (1 << 1) #define WORK_TX_DONE (1 << 1)
/* /*
...@@ -284,7 +283,6 @@ static void eth_port_reset(struct net_device *dev); ...@@ -284,7 +283,6 @@ static void eth_port_reset(struct net_device *dev);
static void eth_port_start(struct net_device *dev); static void eth_port_start(struct net_device *dev);
static int pxa168_eth_open(struct net_device *dev); static int pxa168_eth_open(struct net_device *dev);
static int pxa168_eth_stop(struct net_device *dev); static int pxa168_eth_stop(struct net_device *dev);
static int ethernet_phy_setup(struct net_device *dev);
static inline u32 rdl(struct pxa168_eth_private *pep, int offset) static inline u32 rdl(struct pxa168_eth_private *pep, int offset)
{ {
...@@ -316,26 +314,6 @@ static void abort_dma(struct pxa168_eth_private *pep) ...@@ -316,26 +314,6 @@ static void abort_dma(struct pxa168_eth_private *pep)
netdev_err(pep->dev, "%s : DMA Stuck\n", __func__); netdev_err(pep->dev, "%s : DMA Stuck\n", __func__);
} }
static int ethernet_phy_get(struct pxa168_eth_private *pep)
{
unsigned int reg_data;
reg_data = rdl(pep, PHY_ADDRESS);
return (reg_data >> (5 * pep->port_num)) & 0x1f;
}
static void ethernet_phy_set_addr(struct pxa168_eth_private *pep, int phy_addr)
{
u32 reg_data;
int addr_shift = 5 * pep->port_num;
reg_data = rdl(pep, PHY_ADDRESS);
reg_data &= ~(0x1f << addr_shift);
reg_data |= (phy_addr & 0x1f) << addr_shift;
wrl(pep, PHY_ADDRESS, reg_data);
}
static void rxq_refill(struct net_device *dev) static void rxq_refill(struct net_device *dev)
{ {
struct pxa168_eth_private *pep = netdev_priv(dev); struct pxa168_eth_private *pep = netdev_priv(dev);
...@@ -890,43 +868,9 @@ static int pxa168_eth_collect_events(struct pxa168_eth_private *pep, ...@@ -890,43 +868,9 @@ static int pxa168_eth_collect_events(struct pxa168_eth_private *pep,
} }
if (icr & ICR_RXBUF) if (icr & ICR_RXBUF)
ret = 1; ret = 1;
if (icr & ICR_MII_CH) {
pep->work_todo |= WORK_LINK;
ret = 1;
}
return ret; return ret;
} }
static void handle_link_event(struct pxa168_eth_private *pep)
{
struct net_device *dev = pep->dev;
u32 port_status;
int speed;
int duplex;
int fc;
port_status = rdl(pep, PORT_STATUS);
if (!(port_status & LINK_UP)) {
if (netif_carrier_ok(dev)) {
netdev_info(dev, "link down\n");
netif_carrier_off(dev);
txq_reclaim(dev, 1);
}
return;
}
if (port_status & PORT_SPEED_100)
speed = 100;
else
speed = 10;
duplex = (port_status & FULL_DUPLEX) ? 1 : 0;
fc = (port_status & FLOW_CONTROL_DISABLED) ? 0 : 1;
netdev_info(dev, "link up, %d Mb/s, %s duplex, flow control %sabled\n",
speed, duplex ? "full" : "half", fc ? "en" : "dis");
if (!netif_carrier_ok(dev))
netif_carrier_on(dev);
}
static irqreturn_t pxa168_eth_int_handler(int irq, void *dev_id) static irqreturn_t pxa168_eth_int_handler(int irq, void *dev_id)
{ {
struct net_device *dev = (struct net_device *)dev_id; struct net_device *dev = (struct net_device *)dev_id;
...@@ -1307,10 +1251,6 @@ static int pxa168_rx_poll(struct napi_struct *napi, int budget) ...@@ -1307,10 +1251,6 @@ static int pxa168_rx_poll(struct napi_struct *napi, int budget)
struct net_device *dev = pep->dev; struct net_device *dev = pep->dev;
int work_done = 0; int work_done = 0;
if (unlikely(pep->work_todo & WORK_LINK)) {
pep->work_todo &= ~(WORK_LINK);
handle_link_event(pep);
}
/* /*
* We call txq_reclaim every time since in NAPI interupts are disabled * We call txq_reclaim every time since in NAPI interupts are disabled
* and due to this we miss the TX_DONE interrupt,which is not updated in * and due to this we miss the TX_DONE interrupt,which is not updated in
...@@ -1433,72 +1373,6 @@ static int pxa168_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, ...@@ -1433,72 +1373,6 @@ static int pxa168_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr,
return -EOPNOTSUPP; return -EOPNOTSUPP;
} }
static struct phy_device *phy_scan(struct pxa168_eth_private *pep, int phy_addr)
{
struct mii_bus *bus = pep->smi_bus;
struct phy_device *phydev;
int start;
int num;
int i;
if (phy_addr == PXA168_ETH_PHY_ADDR_DEFAULT) {
/* Scan entire range */
start = ethernet_phy_get(pep);
num = 32;
} else {
/* Use phy addr specific to platform */
start = phy_addr & 0x1f;
num = 1;
}
phydev = NULL;
for (i = 0; i < num; i++) {
int addr = (start + i) & 0x1f;
if (bus->phy_map[addr] == NULL)
mdiobus_scan(bus, addr);
if (phydev == NULL) {
phydev = bus->phy_map[addr];
if (phydev != NULL)
ethernet_phy_set_addr(pep, addr);
}
}
return phydev;
}
static void phy_init(struct pxa168_eth_private *pep)
{
struct phy_device *phy = pep->phy;
phy_attach(pep->dev, dev_name(&phy->dev), pep->phy_intf);
phy->speed = pep->phy_speed;
phy->duplex = pep->phy_duplex;
phy->autoneg = AUTONEG_ENABLE;
phy->supported &= PHY_BASIC_FEATURES;
phy->advertising = phy->supported | ADVERTISED_Autoneg;
if (pep->phy_speed != 0) {
phy->autoneg = AUTONEG_DISABLE;
phy->advertising = 0;
}
phy_start_aneg(phy);
}
static int ethernet_phy_setup(struct net_device *dev)
{
struct pxa168_eth_private *pep = netdev_priv(dev);
pep->phy = phy_scan(pep, pep->phy_addr & 0x1f);
if (pep->phy != NULL)
phy_init(pep);
update_hash_table_mac_address(pep, NULL, dev->dev_addr);
return 0;
}
static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{ {
struct pxa168_eth_private *pep = netdev_priv(dev); struct pxa168_eth_private *pep = netdev_priv(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment