Merge remote-tracking branches 'spi/fix/bcm63xx', 'spi/fix/doc',...

Merge remote-tracking branches 'spi/fix/bcm63xx', 'spi/fix/doc', 'spi/fix/mediatek' and 'spi/fix/pl022' into spi-linus

drivers/spi/spi-bcm63xx.c

@@ -562,8 +562,8 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
 		goto out_clk_disable;
 	}
 
-	dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d)\n",
-		 r->start, irq, bs->fifo_size);
+	dev_info(dev, "at %pr (irq %d, FIFOs size %d)\n",
+		 r, irq, bs->fifo_size);
 
 	return 0;
 

drivers/spi/spi-mt65xx.c

@@ -410,7 +410,7 @@ static int mtk_spi_setup(struct spi_device *spi)
 	if (!spi->controller_data)
 		spi->controller_data = (void *)&mtk_default_chip_info;
 
-	if (mdata->dev_comp->need_pad_sel)
+	if (mdata->dev_comp->need_pad_sel && gpio_is_valid(spi->cs_gpio))
 		gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
 
 	return 0;
@@ -632,13 +632,23 @@ static int mtk_spi_probe(struct platform_device *pdev)
 			goto err_put_master;
 		}
 
-		for (i = 0; i < master->num_chipselect; i++) {
-			ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
-						dev_name(&pdev->dev));
-			if (ret) {
-				dev_err(&pdev->dev,
-					"can't get CS GPIO %i\n", i);
-				goto err_put_master;
+		if (!master->cs_gpios && master->num_chipselect > 1) {
+			dev_err(&pdev->dev,
+				"cs_gpios not specified and num_chipselect > 1\n");
+			ret = -EINVAL;
+			goto err_put_master;
+		}
+
+		if (master->cs_gpios) {
+			for (i = 0; i < master->num_chipselect; i++) {
+				ret = devm_gpio_request(&pdev->dev,
+							master->cs_gpios[i],
+							dev_name(&pdev->dev));
+				if (ret) {
+					dev_err(&pdev->dev,
+						"can't get CS GPIO %i\n", i);
+					goto err_put_master;
+				}
 			}
 		}
 	}

drivers/spi/spi-pl022.c

@@ -1171,19 +1171,31 @@ static int pl022_dma_probe(struct pl022 *pl022)
 static int pl022_dma_autoprobe(struct pl022 *pl022)
 {
 	struct device *dev = &pl022->adev->dev;
+	struct dma_chan *chan;
+	int err;
 
 	/* automatically configure DMA channels from platform, normally using DT */
-	pl022->dma_rx_channel = dma_request_slave_channel(dev, "rx");
-	if (!pl022->dma_rx_channel)
+	chan = dma_request_slave_channel_reason(dev, "rx");
+	if (IS_ERR(chan)) {
+		err = PTR_ERR(chan);
 		goto err_no_rxchan;
+	}
+
+	pl022->dma_rx_channel = chan;
 
-	pl022->dma_tx_channel = dma_request_slave_channel(dev, "tx");
-	if (!pl022->dma_tx_channel)
+	chan = dma_request_slave_channel_reason(dev, "tx");
+	if (IS_ERR(chan)) {
+		err = PTR_ERR(chan);
 		goto err_no_txchan;
+	}
+
+	pl022->dma_tx_channel = chan;
 
 	pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!pl022->dummypage)
+	if (!pl022->dummypage) {
+		err = -ENOMEM;
 		goto err_no_dummypage;
+	}
 
 	return 0;
 
@@ -1194,7 +1206,7 @@ static int pl022_dma_autoprobe(struct pl022 *pl022)
 	dma_release_channel(pl022->dma_rx_channel);
 	pl022->dma_rx_channel = NULL;
 err_no_rxchan:
-	return -ENODEV;
+	return err;
 }
 		
 static void terminate_dma(struct pl022 *pl022)
@@ -2236,6 +2248,10 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 
 	/* Get DMA channels, try autoconfiguration first */
 	status = pl022_dma_autoprobe(pl022);
+	if (status == -EPROBE_DEFER) {
+		dev_dbg(dev, "deferring probe to get DMA channel\n");
+		goto err_no_irq;
+	}
 
 	/* If that failed, use channels from platform_info */
 	if (status == 0)

drivers/spi/spi.c

@@ -376,6 +376,7 @@ static void spi_drv_shutdown(struct device *dev)
 
 /**
  * __spi_register_driver - register a SPI driver
+ * @owner: owner module of the driver to register
  * @sdrv: the driver to register
  * Context: can sleep
  *