Commit a0b4f78f authored by FUJITA Tomonori's avatar FUJITA Tomonori Committed by James Bottomley

[SCSI] lpfc: convert to use the data buffer accessors

 This patch is a reworked version of the data buffer accessors patch
 so that it applies on the NPIV sources.

 The original patch was developed and submitted by Fujita Tomonori:
      FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
      http://marc.info/?l=linux-scsi&m=117896446832171&w=2

  - remove the unnecessary map_single path.

  - convert to use the new accessors for the sg lists and the
    parameters.
Signed-off-by: default avatarFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 858c9f6c
......@@ -321,13 +321,9 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
uint32_t vpi = (lpfc_cmd->cur_iocbq.vport
? lpfc_cmd->cur_iocbq.vport->vpi
: 0);
dma_addr_t physaddr;
uint32_t i, num_bde = 0;
int datadir = scsi_cmnd->sc_data_direction;
int dma_error;
int nseg, datadir = scsi_cmnd->sc_data_direction;
/*
* There are three possibilities here - use scatter-gather segment, use
......@@ -336,26 +332,22 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
* data bde entry.
*/
bpl += 2;
if (scsi_cmnd->use_sg) {
nseg = scsi_dma_map(scsi_cmnd);
if (nseg > 0) {
/*
* The driver stores the segment count returned from pci_map_sg
* because this a count of dma-mappings used to map the use_sg
* pages. They are not guaranteed to be the same for those
* architectures that implement an IOMMU.
*/
sgel = (struct scatterlist *)scsi_cmnd->request_buffer;
lpfc_cmd->seg_cnt = dma_map_sg(&phba->pcidev->dev, sgel,
scsi_cmnd->use_sg, datadir);
if (lpfc_cmd->seg_cnt == 0)
return 1;
lpfc_cmd->seg_cnt = nseg;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
printk(KERN_ERR "%s: Too many sg segments from "
"dma_map_sg. Config %d, seg_cnt %d",
__FUNCTION__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
dma_unmap_sg(&phba->pcidev->dev, sgel,
lpfc_cmd->seg_cnt, datadir);
scsi_dma_unmap(scsi_cmnd);
return 1;
}
......@@ -365,7 +357,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
* single scsi command. Just run through the seg_cnt and format
* the bde's.
*/
for (i = 0; i < lpfc_cmd->seg_cnt; i++) {
scsi_for_each_sg(scsi_cmnd, sgel, nseg, i) {
physaddr = sg_dma_address(sgel);
bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
......@@ -376,35 +368,10 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
bpl->tus.f.bdeFlags = BUFF_USE_RCV;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl++;
sgel++;
num_bde++;
}
} else if (scsi_cmnd->request_buffer && scsi_cmnd->request_bufflen) {
physaddr = dma_map_single(&phba->pcidev->dev,
scsi_cmnd->request_buffer,
scsi_cmnd->request_bufflen,
datadir);
dma_error = dma_mapping_error(physaddr);
if (dma_error) {
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"%d (%d):0718 Unable to dma_map_single "
"request_buffer: x%x\n",
phba->brd_no, vpi, dma_error);
} else if (nseg < 0)
return 1;
}
lpfc_cmd->nonsg_phys = physaddr;
bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
bpl->tus.f.bdeSize = scsi_cmnd->request_bufflen;
if (datadir == DMA_TO_DEVICE)
bpl->tus.f.bdeFlags = 0;
else
bpl->tus.f.bdeFlags = BUFF_USE_RCV;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
num_bde = 1;
bpl++;
}
/*
* Finish initializing those IOCB fields that are dependent on the
......@@ -417,7 +384,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
(num_bde * sizeof (struct ulp_bde64));
iocb_cmd->ulpBdeCount = 1;
iocb_cmd->ulpLe = 1;
fcp_cmnd->fcpDl = be32_to_cpu(scsi_cmnd->request_bufflen);
fcp_cmnd->fcpDl = be32_to_cpu(scsi_bufflen(scsi_cmnd));
return 0;
}
......@@ -430,16 +397,8 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
* a request buffer, but did not request use_sg. There is a third
* case, but it does not require resource deallocation.
*/
if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) {
dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer,
psb->seg_cnt, psb->pCmd->sc_data_direction);
} else {
if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) {
dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys,
psb->pCmd->request_bufflen,
psb->pCmd->sc_data_direction);
}
}
if (psb->seg_cnt > 0)
scsi_dma_unmap(psb->pCmd);
}
static void
......@@ -502,15 +461,15 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
}
}
cmnd->resid = 0;
scsi_set_resid(cmnd, 0);
if (resp_info & RESID_UNDER) {
cmnd->resid = be32_to_cpu(fcprsp->rspResId);
scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
"%d (%d):0716 FCP Read Underrun, expected %d, "
"residual %d Data: x%x x%x x%x\n",
phba->brd_no, vpi, be32_to_cpu(fcpcmd->fcpDl),
cmnd->resid, fcpi_parm, cmnd->cmnd[0],
scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
cmnd->underflow);
/*
......@@ -520,15 +479,16 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
*/
if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
fcpi_parm &&
(cmnd->resid != fcpi_parm)) {
(scsi_get_resid(cmnd) != fcpi_parm)) {
lpfc_printf_log(phba, KERN_WARNING,
LOG_FCP | LOG_FCP_ERROR,
"%d (%d):0735 FCP Read Check Error "
"and Underrun Data: x%x x%x x%x x%x\n",
phba->brd_no, vpi,
be32_to_cpu(fcpcmd->fcpDl),
cmnd->resid, fcpi_parm, cmnd->cmnd[0]);
cmnd->resid = cmnd->request_bufflen;
scsi_get_resid(cmnd), fcpi_parm,
cmnd->cmnd[0]);
scsi_set_resid(cmnd, scsi_bufflen(cmnd));
host_status = DID_ERROR;
}
/*
......@@ -539,15 +499,15 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
*/
if (!(resp_info & SNS_LEN_VALID) &&
(scsi_status == SAM_STAT_GOOD) &&
(cmnd->request_bufflen - cmnd->resid) < cmnd->underflow) {
(scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
< cmnd->underflow)) {
lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
"%d (%d):0717 FCP command x%x residual "
"underrun converted to error "
"Data: x%x x%x x%x\n",
phba->brd_no, vpi, cmnd->cmnd[0],
cmnd->request_bufflen, cmnd->resid,
cmnd->underflow);
cmnd->request_bufflen,
scsi_get_resid(cmnd), cmnd->underflow);
host_status = DID_ERROR;
}
} else if (resp_info & RESID_OVER) {
......@@ -555,7 +515,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
"%d (%d):0720 FCP command x%x residual "
"overrun error. Data: x%x x%x \n",
phba->brd_no, vpi, cmnd->cmnd[0],
cmnd->request_bufflen, cmnd->resid);
scsi_bufflen(cmnd), scsi_get_resid(cmnd));
host_status = DID_ERROR;
/*
......@@ -572,7 +532,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
be32_to_cpu(fcprsp->rspResId),
fcpi_parm, cmnd->cmnd[0]);
host_status = DID_ERROR;
cmnd->resid = cmnd->request_bufflen;
scsi_set_resid(cmnd, scsi_bufflen(cmnd));
}
out:
......@@ -652,7 +612,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
"x%x SNS x%x x%x Data: x%x x%x\n",
phba->brd_no, vpi, cmd->device->id,
cmd->device->lun, cmd, cmd->result,
*lp, *(lp + 3), cmd->retries, cmd->resid);
*lp, *(lp + 3), cmd->retries,
scsi_get_resid(cmd));
}
result = cmd->result;
......@@ -767,22 +728,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
* bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
* data bde entry.
*/
if (scsi_cmnd->use_sg) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
iocb_cmd->un.fcpi.fcpi_parm = 0;
iocb_cmd->ulpPU = 0;
fcp_cmnd->fcpCntl3 = WRITE_DATA;
phba->fc4OutputRequests++;
} else {
iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
iocb_cmd->ulpPU = PARM_READ_CHECK;
iocb_cmd->un.fcpi.fcpi_parm =
scsi_cmnd->request_bufflen;
fcp_cmnd->fcpCntl3 = READ_DATA;
phba->fc4InputRequests++;
}
} else if (scsi_cmnd->request_buffer && scsi_cmnd->request_bufflen) {
if (scsi_sg_count(scsi_cmnd)) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
iocb_cmd->un.fcpi.fcpi_parm = 0;
......@@ -792,8 +738,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
} else {
iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
iocb_cmd->ulpPU = PARM_READ_CHECK;
iocb_cmd->un.fcpi.fcpi_parm =
scsi_cmnd->request_bufflen;
iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
fcp_cmnd->fcpCntl3 = READ_DATA;
phba->fc4InputRequests++;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment