Skip to content

L
linux
Commit a12e4537 authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt
Browse files
Options

Merge remote-tracking branch 'scott/next' into next 

Merge some Freescale updates from Scott Wood
parents b7bc9e7d c8db32c8
Show whitespace changes
Inline Side-by-side
Showing with 1088 additions and 155 deletions
Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
View file @ a12e4537
* Freescale MSI interrupt controller
Required properties:
- compatible : compatible list, contains 2 entries,
first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
the parent type.
- compatible : compatible list, may contain one or two entries
The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
"fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
should be used. The first entry is optional; the second entry is
required.
- reg : It may contain one or two regions. The first region should contain
the address and the length of the shared message interrupt register set.
The second region should contain the address of aliased MSIIR register for
platforms that have such an alias.
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
optional, without this, all the 256 MSI interrupts can be used.
Each available range must begin and end on a multiple of 32 (i.e.
no splitting an individual MSI register or the associated PIC interrupt).
The second region should contain the address of aliased MSIIR or MSIIR1
register for platforms that have such an alias, if using MSIIR1, the second
region must be added because different MSI group has different MSIIR1 offset.
- interrupts : each one of the interrupts here is one entry per 32 MSIs,
and routed to the host interrupt controller. the interrupts should
......@@ -28,6 +27,14 @@ Required properties:
to MPIC.
Optional properties:
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is
optional, without this, all the MSI interrupts can be used.
Each available range must begin and end on a multiple of 32 (i.e.
no splitting an individual MSI register or the associated PIC interrupt).
MPIC v4.3 does not support this property because the 32 interrupts of an
individual register are not continuous when using MSIIR1.
- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
is used for MSI messaging. The address of MSIIR in PCI address space is
the MSI message address.
......@@ -54,6 +61,28 @@ Example:
interrupt-parent = <&mpic>;
};
msi@41600 {
compatible = "fsl,mpic-msi-v4.3";
reg = <0x41600 0x200 0x44148 4>;
interrupts = <
0xe0 0 0 0
0xe1 0 0 0
0xe2 0 0 0
0xe3 0 0 0
0xe4 0 0 0
0xe5 0 0 0
0xe6 0 0 0
0xe7 0 0 0
0x100 0 0 0
0x101 0 0 0
0x102 0 0 0
0x103 0 0 0
0x104 0 0 0
0x105 0 0 0
0x106 0 0 0
0x107 0 0 0>;
};
The Freescale hypervisor and msi-address-64
-------------------------------------------
Normally, PCI devices have access to all of CCSR via an ATMU mapping. The
......
arch/powerpc/Makefile
View file @ a12e4537
......@@ -98,7 +98,7 @@ CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
KBUILD_CPPFLAGS += -Iarch/$(ARCH)
KBUILD_AFLAGS += -Iarch/$(ARCH)
KBUILD_AFLAGS += -msoft-float -Iarch/$(ARCH)
KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS)
......@@ -132,6 +132,21 @@ ifeq ($(CONFIG_6xx),y)
KBUILD_CFLAGS += -mcpu=powerpc
endif
ifeq ($(CONFIG_E500),y)
ifeq ($(CONFIG_64BIT),y)
KBUILD_CFLAGS += -mcpu=e5500
KBUILD_AFLAGS += -mcpu=e5500
else
ifeq ($(CONFIG_PPC_E500MC),y)
KBUILD_CFLAGS += -mcpu=e500mc
KBUILD_AFLAGS += -mcpu=e500mc
else
KBUILD_CFLAGS += -mcpu=8540
KBUILD_AFLAGS += -mcpu=8540
endif
endif
endif
# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
ifeq ($(CONFIG_FUNCTION_TRACER),y)
KBUILD_CFLAGS += -mno-sched-epilog
......@@ -139,7 +154,6 @@ endif
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
cpu-as-$(CONFIG_E500) += -Wa,-me500
cpu-as-$(CONFIG_E200) += -Wa,-me200
KBUILD_AFLAGS += $(cpu-as-y)
......
arch/powerpc/boot/dts/b4420qds.dts
View file @ a12e4537
......@@ -33,7 +33,7 @@
*/
/include/ "fsl/b4420si-pre.dtsi"
/include/ "b4qds.dts"
/include/ "b4qds.dtsi"
/ {
model = "fsl,B4420QDS";
......
arch/powerpc/boot/dts/b4860qds.dts
View file @ a12e4537
......@@ -33,7 +33,7 @@
*/
/include/ "fsl/b4860si-pre.dtsi"
/include/ "b4qds.dts"
/include/ "b4qds.dtsi"
/ {
model = "fsl,B4860QDS";
......
arch/powerpc/boot/dts/fsl/b4si-post.dtsi
View file @ a12e4537
......@@ -204,7 +204,7 @@ pamu3: pamu@3000 {
};
};
/include/ "qoriq-mpic.dtsi"
/include/ "qoriq-mpic4.3.dtsi"
guts: global-utilities@e0000 {
compatible = "fsl,b4-device-config";
......
arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi 0 → 100644
View file @ a12e4537
/*
* QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <4>;
reg = <0x40000 0x40000>;
compatible = "fsl,mpic";
device_type = "open-pic";
clock-frequency = <0x0>;
};
timer@41100 {
compatible = "fsl,mpic-global-timer";
reg = <0x41100 0x100 0x41300 4>;
interrupts = <0 0 3 0
1 0 3 0
2 0 3 0
3 0 3 0>;
};
msi0: msi@41600 {
compatible = "fsl,mpic-msi-v4.3";
reg = <0x41600 0x200 0x44148 4>;
interrupts = <
0xe0 0 0 0
0xe1 0 0 0
0xe2 0 0 0
0xe3 0 0 0
0xe4 0 0 0
0xe5 0 0 0
0xe6 0 0 0
0xe7 0 0 0
0x100 0 0 0
0x101 0 0 0
0x102 0 0 0
0x103 0 0 0
0x104 0 0 0
0x105 0 0 0
0x106 0 0 0
0x107 0 0 0>;
};
msi1: msi@41800 {
compatible = "fsl,mpic-msi-v4.3";
reg = <0x41800 0x200 0x45148 4>;
interrupts = <
0xe8 0 0 0
0xe9 0 0 0
0xea 0 0 0
0xeb 0 0 0
0xec 0 0 0
0xed 0 0 0
0xee 0 0 0
0xef 0 0 0
0x108 0 0 0
0x109 0 0 0
0x10a 0 0 0
0x10b 0 0 0
0x10c 0 0 0
0x10d 0 0 0
0x10e 0 0 0
0x10f 0 0 0>;
};
msi2: msi@41a00 {
compatible = "fsl,mpic-msi-v4.3";
reg = <0x41a00 0x200 0x46148 4>;
interrupts = <
0xf0 0 0 0
0xf1 0 0 0
0xf2 0 0 0
0xf3 0 0 0
0xf4 0 0 0
0xf5 0 0 0
0xf6 0 0 0
0xf7 0 0 0
0x110 0 0 0
0x111 0 0 0
0x112 0 0 0
0x113 0 0 0
0x114 0 0 0
0x115 0 0 0
0x116 0 0 0
0x117 0 0 0>;
};
msi3: msi@41c00 {
compatible = "fsl,mpic-msi-v4.3";
reg = <0x41c00 0x200 0x47148 4>;
interrupts = <
0xf8 0 0 0
0xf9 0 0 0
0xfa 0 0 0
0xfb 0 0 0
0xfc 0 0 0
0xfd 0 0 0
0xfe 0 0 0
0xff 0 0 0
0x118 0 0 0
0x119 0 0 0
0x11a 0 0 0
0x11b 0 0 0
0x11c 0 0 0
0x11d 0 0 0
0x11e 0 0 0
0x11f 0 0 0>;
};
timer@42100 {
compatible = "fsl,mpic-global-timer";
reg = <0x42100 0x100 0x42300 4>;
interrupts = <4 0 3 0
5 0 3 0
6 0 3 0
7 0 3 0>;
};
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
View file @ a12e4537
......@@ -358,7 +358,7 @@ iommu@20000 {
16 2 1 30>;
};
/include/ "qoriq-mpic.dtsi"
/include/ "qoriq-mpic4.3.dtsi"
guts: global-utilities@e0000 {
compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
......
arch/powerpc/boot/dts/p1020rdb-pd.dts 0 → 100644
View file @ a12e4537
/*
* P1020 RDB-PD Device Tree Source (32-bit address map)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB-PD";
compatible = "fsl,P1020RDB-PD";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0x0 0xffe05000 0x0 0x1000>;
/* NOR, NAND flash, L2 switch and CPLD */
ranges = <0x0 0x0 0x0 0xec000000 0x04000000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffa00000 0x00020000
0x3 0x0 0x0 0xffb00000 0x00020000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x4000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* 128KB for DTB Image */
reg = <0x0 0x00020000>;
label = "NOR DTB Image";
};
partition@20000 {
/* 3.875 MB for Linux Kernel Image */
reg = <0x00020000 0x003e0000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 58MB for Root file System */
reg = <0x00400000 0x03a00000>;
label = "NOR Root File System";
};
partition@3e00000 {
/* This location must not be altered */
/* 1M for Vitesse 7385 Switch firmware */
reg = <0x3e00000 0x00100000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@3f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x03f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1020-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 122MB for File System Image */
reg = <0x00600000 0x07a00000>;
label = "NAND File System Image";
};
};
cpld@2,0 {
compatible = "fsl,p1020rdb-pd-cpld";
reg = <0x2 0x0 0x20000>;
};
L2switch@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "vitesse-7385";
reg = <0x3 0x0 0x20000>;
};
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
/* input clock */
spi-max-frequency = <40000000>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "SPI U-Boot Image";
read-only;
};
partition@80000 {
/* 512KB for DTB Image*/
reg = <0x00080000 0x00080000>;
label = "SPI DTB Image";
};
partition@100000 {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "SPI Linux Kernel Image";
};
partition@500000 {
/* 11MB for FS System Image */
reg = <0x00500000 0x00b00000>;
label = "SPI File System Image";
};
};
slic@0 {
compatible = "zarlink,le88266";
reg = <1>;
spi-max-frequency = <8000000>;
};
slic@1 {
compatible = "zarlink,le88266";
reg = <2>;
spi-max-frequency = <8000000>;
};
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x1>;
};
};
mdio@25000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26000 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
};
enet2: ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
usb@22000 {
phy_type = "ulpi";
};
};
pci0: pcie@ffe09000 {
reg = <0x0 0xffe09000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0x0 0xffe0a000 0x0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/p1020si-post.dtsi"
arch/powerpc/configs/85xx/p1023rds_defconfig
View file @ a12e4537
......@@ -63,6 +63,7 @@ CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
......
arch/powerpc/configs/corenet32_smp_defconfig
View file @ a12e4537
......@@ -70,6 +70,7 @@ CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/corenet64_smp_defconfig
View file @ a12e4537
......@@ -59,6 +59,7 @@ CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
......
arch/powerpc/configs/mpc83xx_defconfig
View file @ a12e4537
......@@ -42,6 +42,7 @@ CONFIG_INET_ESP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/mpc85xx_defconfig
View file @ a12e4537
......@@ -78,6 +78,7 @@ CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
......
arch/powerpc/configs/mpc85xx_smp_defconfig
View file @ a12e4537
......@@ -81,6 +81,7 @@ CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
......
arch/powerpc/include/asm/epapr_hcalls.h
View file @ a12e4537
......@@ -105,6 +105,12 @@
extern bool epapr_paravirt_enabled;
extern u32 epapr_hypercall_start[];
#ifdef CONFIG_EPAPR_PARAVIRT
int __init epapr_paravirt_early_init(void);
#else
static inline int epapr_paravirt_early_init(void) { return 0; }
#endif
/*
* We use "uintptr_t" to define a register because it's guaranteed to be a
* 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit
......
arch/powerpc/include/asm/mpic.h
View file @ a12e4537
......@@ -396,7 +396,14 @@ extern struct bus_type mpic_subsys;
#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */
/* Get the version of primary MPIC */
#ifdef CONFIG_MPIC
extern u32 fsl_mpic_primary_get_version(void);
#else
static inline u32 fsl_mpic_primary_get_version(void)
{
return 0;
}
#endif
/* Allocate the controller structure and setup the linux irq descs
* for the range if interrupts passed in. No HW initialization is
......
arch/powerpc/include/asm/perf_event_fsl_emb.h
View file @ a12e4537
......@@ -13,7 +13,7 @@
#include <linux/types.h>
#include <asm/hw_irq.h>
#define MAX_HWEVENTS 4
#define MAX_HWEVENTS 6
/* event flags */
#define FSL_EMB_EVENT_VALID 1
......
arch/powerpc/include/asm/ppc-opcode.h
View file @ a12e4537
......@@ -81,6 +81,53 @@
#define __REGA0_R30 30
#define __REGA0_R31 31
/* opcode and xopcode for instructions */
#define OP_TRAP 3
#define OP_TRAP_64 2
#define OP_31_XOP_TRAP 4
#define OP_31_XOP_LWZX 23
#define OP_31_XOP_DCBST 54
#define OP_31_XOP_LWZUX 55
#define OP_31_XOP_TRAP_64 68
#define OP_31_XOP_DCBF 86
#define OP_31_XOP_LBZX 87
#define OP_31_XOP_STWX 151
#define OP_31_XOP_STBX 215
#define OP_31_XOP_LBZUX 119
#define OP_31_XOP_STBUX 247
#define OP_31_XOP_LHZX 279
#define OP_31_XOP_LHZUX 311
#define OP_31_XOP_MFSPR 339
#define OP_31_XOP_LHAX 343
#define OP_31_XOP_LHAUX 375
#define OP_31_XOP_STHX 407
#define OP_31_XOP_STHUX 439
#define OP_31_XOP_MTSPR 467
#define OP_31_XOP_DCBI 470
#define OP_31_XOP_LWBRX 534
#define OP_31_XOP_TLBSYNC 566
#define OP_31_XOP_STWBRX 662
#define OP_31_XOP_LHBRX 790
#define OP_31_XOP_STHBRX 918
#define OP_LWZ 32
#define OP_LD 58
#define OP_LWZU 33
#define OP_LBZ 34
#define OP_LBZU 35
#define OP_STW 36
#define OP_STWU 37
#define OP_STD 62
#define OP_STB 38
#define OP_STBU 39
#define OP_LHZ 40
#define OP_LHZU 41
#define OP_LHA 42
#define OP_LHAU 43
#define OP_STH 44
#define OP_STHU 45
/* sorted alphabetically */
#define PPC_INST_BHRBE 0x7c00025c
#define PPC_INST_CLRBHRB 0x7c00035c
......
arch/powerpc/include/asm/reg_fsl_emb.h
View file @ a12e4537
......@@ -17,12 +17,16 @@
/* Freescale Book E Performance Monitor APU Registers */
#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
#define PMRN_PMC2 0x012 /* Performance Monitor Counter 2 */
#define PMRN_PMC3 0x013 /* Performance Monitor Counter 3 */
#define PMRN_PMC4 0x014 /* Performance Monitor Counter 4 */
#define PMRN_PMC5 0x015 /* Performance Monitor Counter 5 */
#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
#define PMRN_PMLCA4 0x094 /* PM Local Control A4 */
#define PMRN_PMLCA5 0x095 /* PM Local Control A5 */
#define PMLCA_FC 0x80000000 /* Freeze Counter */
#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
......@@ -30,14 +34,18 @@
#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
#define PMLCA_CE 0x04000000 /* Condition Enable */
#define PMLCA_FGCS1 0x00000002 /* Freeze in guest state */
#define PMLCA_FGCS0 0x00000001 /* Freeze in hypervisor state */
#define PMLCA_EVENT_MASK 0x00ff0000 /* Event field */
#define PMLCA_EVENT_MASK 0x01ff0000 /* Event field */
#define PMLCA_EVENT_SHIFT 16
#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
#define PMRN_PMLCB4 0x114 /* PM Local Control B4 */
#define PMRN_PMLCB5 0x115 /* PM Local Control B5 */
#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */
#define PMLCB_THRESHMUL_SHIFT 8
......@@ -55,16 +63,22 @@
#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 2 */
#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 3 */
#define PMRN_UPMC4 0x004 /* User Performance Monitor Counter 4 */
#define PMRN_UPMC5 0x005 /* User Performance Monitor Counter 5 */
#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
#define PMRN_UPMLCA4 0x084 /* User PM Local Control A4 */
#define PMRN_UPMLCA5 0x085 /* User PM Local Control A5 */
#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
#define PMRN_UPMLCB4 0x104 /* User PM Local Control B4 */
#define PMRN_UPMLCB5 0x105 /* User PM Local Control B5 */
#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
......
arch/powerpc/kernel/cpu_setup_fsl_booke.S
View file @ a12e4537
......@@ -75,7 +75,7 @@ _GLOBAL(__setup_cpu_e500v2)
bl __e500_icache_setup
bl __e500_dcache_setup
bl __setup_e500_ivors
#ifdef CONFIG_FSL_RIO
#if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI)
/* Ensure that RFXE is set */
mfspr r3,SPRN_HID1
oris r3,r3,HID1_RFXE@h
......
arch/powerpc/kernel/cputable.c
View file @ a12e4537
......@@ -2105,7 +2105,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 4,
.num_pmcs = 6,
.oprofile_cpu_type = "ppc/e6500",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.cpu_setup = __setup_cpu_e6500,
......
arch/powerpc/kernel/epapr_paravirt.c
View file @ a12e4537
......@@ -30,22 +30,20 @@ extern u32 epapr_ev_idle_start[];
bool epapr_paravirt_enabled;
static int __init epapr_paravirt_init(void)
static int __init early_init_dt_scan_epapr(unsigned long node,
const char *uname,
int depth, void *data)
{
struct device_node *hyper_node;
const u32 *insts;
int len, i;
unsigned long len;
int i;
hyper_node = of_find_node_by_path("/hypervisor");
if (!hyper_node)
return -ENODEV;
insts = of_get_property(hyper_node, "hcall-instructions", &len);
insts = of_get_flat_dt_prop(node, "hcall-instructions", &len);
if (!insts)
return -ENODEV;
return 0;
if (len % 4 || len > (4 * 4))
return -ENODEV;
return -1;
for (i = 0; i < (len / 4); i++) {
patch_instruction(epapr_hypercall_start + i, insts[i]);
......@@ -55,13 +53,19 @@ static int __init epapr_paravirt_init(void)
}
#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
if (of_get_property(hyper_node, "has-idle", NULL))
if (of_get_flat_dt_prop(node, "has-idle", NULL))
ppc_md.power_save = epapr_ev_idle;
#endif
epapr_paravirt_enabled = true;
return 1;
}
int __init epapr_paravirt_early_init(void)
{
of_scan_flat_dt(early_init_dt_scan_epapr, NULL);
return 0;
}
early_initcall(epapr_paravirt_init);
arch/powerpc/kernel/setup_32.c
View file @ a12e4537
......@@ -38,6 +38,7 @@
#include <asm/serial.h>
#include <asm/udbg.h>
#include <asm/mmu_context.h>
#include <asm/epapr_hcalls.h>
#include "setup.h"
......@@ -128,6 +129,8 @@ notrace void __init machine_init(u64 dt_ptr)
/* Do some early initialization based on the flat device tree */
early_init_devtree(__va(dt_ptr));
epapr_paravirt_early_init();
early_init_mmu();
probe_machine();
......@@ -326,5 +329,4 @@ void __init setup_arch(char **cmdline_p)
/* Initialize the MMU context management stuff */
mmu_context_init();
}
arch/powerpc/kernel/setup_64.c
View file @ a12e4537
......@@ -66,6 +66,7 @@
#include <asm/code-patching.h>
#include <asm/kvm_ppc.h>
#include <asm/hugetlb.h>
#include <asm/epapr_hcalls.h>
#include "setup.h"
......@@ -215,6 +216,8 @@ void __init early_setup(unsigned long dt_ptr)
*/
early_init_devtree(__va(dt_ptr));
epapr_paravirt_early_init();
/* Now we know the logical id of our boot cpu, setup the paca. */
setup_paca(&paca[boot_cpuid]);
fixup_boot_paca();
......
arch/powerpc/kernel/swsusp_booke.S
View file @ a12e4537
......@@ -141,6 +141,14 @@ _GLOBAL(swsusp_arch_resume)
lis r11,swsusp_save_area@h
ori r11,r11,swsusp_save_area@l
/*
* Mappings from virtual addresses to physical addresses may be
* different than they were prior to restoring hibernation state.
* Invalidate the TLB so that the boot CPU is using the new
* mappings.
*/
bl _tlbil_all
lwz r4,SL_SPRG0(r11)
mtsprg 0,r4
lwz r4,SL_SPRG1(r11)
......
arch/powerpc/kernel/traps.c
View file @ a12e4537
......@@ -62,6 +62,7 @@
#include <asm/switch_to.h>
#include <asm/tm.h>
#include <asm/debug.h>
#include <sysdev/fsl_pci.h>
#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
int (*__debugger)(struct pt_regs *regs) __read_mostly;
......@@ -567,6 +568,8 @@ int machine_check_e500(struct pt_regs *regs)
if (reason & MCSR_BUS_RBERR) {
if (fsl_rio_mcheck_exception(regs))
return 1;
if (fsl_pci_mcheck_exception(regs))
return 1;
}
printk("Machine check in kernel mode.\n");
......
arch/powerpc/kvm/emulate.c
View file @ a12e4537
......@@ -30,53 +30,10 @@
#include <asm/byteorder.h>
#include <asm/kvm_ppc.h>
#include <asm/disassemble.h>
#include <asm/ppc-opcode.h>
#include "timing.h"
#include "trace.h"
#define OP_TRAP 3
#define OP_TRAP_64 2
#define OP_31_XOP_TRAP 4
#define OP_31_XOP_LWZX 23
#define OP_31_XOP_DCBST 54
#define OP_31_XOP_TRAP_64 68
#define OP_31_XOP_DCBF 86
#define OP_31_XOP_LBZX 87
#define OP_31_XOP_STWX 151
#define OP_31_XOP_STBX 215
#define OP_31_XOP_LBZUX 119
#define OP_31_XOP_STBUX 247
#define OP_31_XOP_LHZX 279
#define OP_31_XOP_LHZUX 311
#define OP_31_XOP_MFSPR 339
#define OP_31_XOP_LHAX 343
#define OP_31_XOP_STHX 407
#define OP_31_XOP_STHUX 439
#define OP_31_XOP_MTSPR 467
#define OP_31_XOP_DCBI 470
#define OP_31_XOP_LWBRX 534
#define OP_31_XOP_TLBSYNC 566
#define OP_31_XOP_STWBRX 662
#define OP_31_XOP_LHBRX 790
#define OP_31_XOP_STHBRX 918
#define OP_LWZ 32
#define OP_LD 58
#define OP_LWZU 33
#define OP_LBZ 34
#define OP_LBZU 35
#define OP_STW 36
#define OP_STWU 37
#define OP_STD 62
#define OP_STB 38
#define OP_STBU 39
#define OP_LHZ 40
#define OP_LHZU 41
#define OP_LHA 42
#define OP_LHAU 43
#define OP_STH 44
#define OP_STHU 45
void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
{
unsigned long dec_nsec;
......
arch/powerpc/oprofile/op_model_fsl_emb.c
View file @ a12e4537
......@@ -46,6 +46,12 @@ static inline u32 get_pmlca(int ctr)
case 3:
pmlca = mfpmr(PMRN_PMLCA3);
break;
case 4:
pmlca = mfpmr(PMRN_PMLCA4);
break;
case 5:
pmlca = mfpmr(PMRN_PMLCA5);
break;
default:
panic("Bad ctr number\n");
}
......@@ -68,6 +74,12 @@ static inline void set_pmlca(int ctr, u32 pmlca)
case 3:
mtpmr(PMRN_PMLCA3, pmlca);
break;
case 4:
mtpmr(PMRN_PMLCA4, pmlca);
break;
case 5:
mtpmr(PMRN_PMLCA5, pmlca);
break;
default:
panic("Bad ctr number\n");
}
......@@ -84,6 +96,10 @@ static inline unsigned int ctr_read(unsigned int i)
return mfpmr(PMRN_PMC2);
case 3:
return mfpmr(PMRN_PMC3);
case 4:
return mfpmr(PMRN_PMC4);
case 5:
return mfpmr(PMRN_PMC5);
default:
return 0;
}
......@@ -104,6 +120,12 @@ static inline void ctr_write(unsigned int i, unsigned int val)
case 3:
mtpmr(PMRN_PMC3, val);
break;
case 4:
mtpmr(PMRN_PMC4, val);
break;
case 5:
mtpmr(PMRN_PMC5, val);
break;
default:
break;
}
......@@ -133,6 +155,14 @@ static void init_pmc_stop(int ctr)
mtpmr(PMRN_PMLCA3, pmlca);
mtpmr(PMRN_PMLCB3, pmlcb);
break;
case 4:
mtpmr(PMRN_PMLCA4, pmlca);
mtpmr(PMRN_PMLCB4, pmlcb);
break;
case 5:
mtpmr(PMRN_PMLCA5, pmlca);
mtpmr(PMRN_PMLCB5, pmlcb);
break;
default:
panic("Bad ctr number!\n");
}
......
arch/powerpc/perf/Makefile
View file @ a12e4537
......@@ -9,7 +9,7 @@ obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \
obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o
obj-$(CONFIG_FSL_EMB_PERF_EVENT) += core-fsl-emb.o
obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o
obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o e6500-pmu.o
obj-$(CONFIG_PPC64) += $(obj64-y)
obj-$(CONFIG_PPC32) += $(obj32-y)
arch/powerpc/perf/core-fsl-emb.c
View file @ a12e4537
......@@ -70,6 +70,12 @@ static unsigned long read_pmc(int idx)
case 3:
val = mfpmr(PMRN_PMC3);
break;
case 4:
val = mfpmr(PMRN_PMC4);
break;
case 5:
val = mfpmr(PMRN_PMC5);
break;
default:
printk(KERN_ERR "oops trying to read PMC%d\n", idx);
val = 0;
......@@ -95,6 +101,12 @@ static void write_pmc(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMC3, val);
break;
case 4:
mtpmr(PMRN_PMC4, val);
break;
case 5:
mtpmr(PMRN_PMC5, val);
break;
default:
printk(KERN_ERR "oops trying to write PMC%d\n", idx);
}
......@@ -120,6 +132,12 @@ static void write_pmlca(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMLCA3, val);
break;
case 4:
mtpmr(PMRN_PMLCA4, val);
break;
case 5:
mtpmr(PMRN_PMLCA5, val);
break;
default:
printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
}
......@@ -145,6 +163,12 @@ static void write_pmlcb(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMLCB3, val);
break;
case 4:
mtpmr(PMRN_PMLCB4, val);
break;
case 5:
mtpmr(PMRN_PMLCB5, val);
break;
default:
printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
}
......@@ -462,6 +486,12 @@ static int fsl_emb_pmu_event_init(struct perf_event *event)
int num_restricted;
int i;
if (ppmu->n_counter > MAX_HWEVENTS) {
WARN(1, "No. of perf counters (%d) is higher than max array size(%d)\n",
ppmu->n_counter, MAX_HWEVENTS);
ppmu->n_counter = MAX_HWEVENTS;
}
switch (event->attr.type) {
case PERF_TYPE_HARDWARE:
ev = event->attr.config;
......
arch/powerpc/perf/e6500-pmu.c 0 → 100644
View file @ a12e4537
/*
* Performance counter support for e6500 family processors.
*
* Author: Priyanka Jain, Priyanka.Jain@freescale.com
* Based on e500-pmu.c
* Copyright 2013 Freescale Semiconductor, Inc.
* Copyright 2008-2009 Paul Mackerras, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/string.h>
#include <linux/perf_event.h>
#include <asm/reg.h>
#include <asm/cputable.h>
/*
* Map of generic hardware event types to hardware events
* Zero if unsupported
*/
static int e6500_generic_events[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 1,
[PERF_COUNT_HW_INSTRUCTIONS] = 2,
[PERF_COUNT_HW_CACHE_MISSES] = 221,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
[PERF_COUNT_HW_BRANCH_MISSES] = 15,
};
#define C(x) PERF_COUNT_HW_CACHE_##x
/*
* Table of generalized cache-related events.
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
static int e6500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 27, 222 },
[C(OP_WRITE)] = { 28, 223 },
[C(OP_PREFETCH)] = { 29, 0 },
},
[C(L1I)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 2, 254 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { 37, 0 },
},
/*
* Assuming LL means L2, it's not a good match for this model.
* It does not have separate read/write events (but it does have
* separate instruction/data events).
*/
[C(LL)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0 },
[C(OP_WRITE)] = { 0, 0 },
[C(OP_PREFETCH)] = { 0, 0 },
},
/*
* There are data/instruction MMU misses, but that's a miss on
* the chip's internal level-one TLB which is probably not
* what the user wants. Instead, unified level-two TLB misses
* are reported here.
*/
[C(DTLB)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 26, 66 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(BPU)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 12, 15 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(NODE)] = {
/* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { -1, -1 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
};
static int num_events = 512;
/* Upper half of event id is PMLCb, for threshold events */
static u64 e6500_xlate_event(u64 event_id)
{
u32 event_low = (u32)event_id;
if (event_low >= num_events ||
(event_id & (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)))
return 0;
return FSL_EMB_EVENT_VALID;
}
static struct fsl_emb_pmu e6500_pmu = {
.name = "e6500 family",
.n_counter = 6,
.n_restricted = 0,
.xlate_event = e6500_xlate_event,
.n_generic = ARRAY_SIZE(e6500_generic_events),
.generic_events = e6500_generic_events,
.cache_events = &e6500_cache_events,
};
static int init_e6500_pmu(void)
{
if (!cur_cpu_spec->oprofile_cpu_type ||
strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e6500"))
return -ENODEV;
return register_fsl_emb_pmu(&e6500_pmu);
}
early_initcall(init_e6500_pmu);
arch/powerpc/platforms/85xx/corenet_ds.c
View file @ a12e4537
......@@ -53,12 +53,6 @@ void __init corenet_ds_setup_arch(void)
{
mpc85xx_smp_init();
#if defined(CONFIG_PCI) && defined(CONFIG_PPC64)
pci_devs_phb_init();
#endif
fsl_pci_assign_primary();
swiotlb_detect_4g();
pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
......
arch/powerpc/platforms/85xx/mpc85xx_rdb.c
View file @ a12e4537
......@@ -160,6 +160,7 @@ machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_rdb_pd, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
......@@ -193,6 +194,13 @@ static int __init p1020_rdb_pc_probe(void)
return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
}
static int __init p1020_rdb_pd_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PD");
}
static int __init p1021_rdb_pc_probe(void)
{
unsigned long root = of_get_flat_dt_root();
......@@ -351,6 +359,20 @@ define_machine(p1020_rdb_pc) {
.progress = udbg_progress,
};
define_machine(p1020_rdb_pd) {
.name = "P1020RDB-PD",
.probe = p1020_rdb_pd_probe,
.setup_arch = mpc85xx_rdb_setup_arch,
.init_IRQ = mpc85xx_rdb_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
define_machine(p1024_rdb) {
.name = "P1024 RDB",
.probe = p1024_rdb_probe,
......
arch/powerpc/sysdev/fsl_msi.c
View file @ a12e4537
......@@ -28,6 +28,18 @@
#include "fsl_msi.h"
#include "fsl_pci.h"
#define MSIIR_OFFSET_MASK 0xfffff
#define MSIIR_IBS_SHIFT 0
#define MSIIR_SRS_SHIFT 5
#define MSIIR1_IBS_SHIFT 4
#define MSIIR1_SRS_SHIFT 0
#define MSI_SRS_MASK 0xf
#define MSI_IBS_MASK 0x1f
#define msi_hwirq(msi, msir_index, intr_index) \
((msir_index) << (msi)->srs_shift | \
((intr_index) << (msi)->ibs_shift))
static LIST_HEAD(msi_head);
struct fsl_msi_feature {
......@@ -80,18 +92,19 @@ static const struct irq_domain_ops fsl_msi_host_ops = {
static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
{
int rc;
int rc, hwirq;
rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS,
rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS_MAX,
msi_data->irqhost->of_node);
if (rc)
return rc;
rc = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap);
if (rc < 0) {
msi_bitmap_free(&msi_data->bitmap);
return rc;
}
/*
* Reserve all the hwirqs
* The available hwirqs will be released in fsl_msi_setup_hwirq()
*/
for (hwirq = 0; hwirq < NR_MSI_IRQS_MAX; hwirq++)
msi_bitmap_reserve_hwirq(&msi_data->bitmap, hwirq);
return 0;
}
......@@ -144,8 +157,9 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
msg->data = hwirq;
pr_debug("%s: allocated srs: %d, ibs: %d\n",
__func__, hwirq / IRQS_PER_MSI_REG, hwirq % IRQS_PER_MSI_REG);
pr_debug("%s: allocated srs: %d, ibs: %d\n", __func__,
(hwirq >> msi_data->srs_shift) & MSI_SRS_MASK,
(hwirq >> msi_data->ibs_shift) & MSI_IBS_MASK);
}
static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
......@@ -255,7 +269,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
msir_index = cascade_data->index;
if (msir_index >= NR_MSI_REG)
if (msir_index >= NR_MSI_REG_MAX)
cascade_irq = NO_IRQ;
irqd_set_chained_irq_inprogress(idata);
......@@ -285,8 +299,8 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
intr_index = ffs(msir_value) - 1;
cascade_irq = irq_linear_revmap(msi_data->irqhost,
msir_index * IRQS_PER_MSI_REG +
intr_index + have_shift);
msi_hwirq(msi_data, msir_index,
intr_index + have_shift));
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
have_shift += intr_index + 1;
......@@ -316,7 +330,7 @@ static int fsl_of_msi_remove(struct platform_device *ofdev)
if (msi->list.prev != NULL)
list_del(&msi->list);
for (i = 0; i < NR_MSI_REG; i++) {
for (i = 0; i < NR_MSI_REG_MAX; i++) {
virq = msi->msi_virqs[i];
if (virq != NO_IRQ) {
cascade_data = irq_get_handler_data(virq);
......@@ -339,7 +353,7 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
int offset, int irq_index)
{
struct fsl_msi_cascade_data *cascade_data = NULL;
int virt_msir;
int virt_msir, i;
virt_msir = irq_of_parse_and_map(dev->dev.of_node, irq_index);
if (virt_msir == NO_IRQ) {
......@@ -360,6 +374,11 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
irq_set_handler_data(virt_msir, cascade_data);
irq_set_chained_handler(virt_msir, fsl_msi_cascade);
/* Release the hwirqs corresponding to this MSI register */
for (i = 0; i < IRQS_PER_MSI_REG; i++)
msi_bitmap_free_hwirqs(&msi->bitmap,
msi_hwirq(msi, offset, i), 1);
return 0;
}
......@@ -368,14 +387,12 @@ static int fsl_of_msi_probe(struct platform_device *dev)
{
const struct of_device_id *match;
struct fsl_msi *msi;
struct resource res;
struct resource res, msiir;
int err, i, j, irq_index, count;
int rc;
const u32 *p;
const struct fsl_msi_feature *features;
int len;
u32 offset;
static const u32 all_avail[] = { 0, NR_MSI_IRQS };
match = of_match_device(fsl_of_msi_ids, &dev->dev);
if (!match)
......@@ -392,7 +409,7 @@ static int fsl_of_msi_probe(struct platform_device *dev)
platform_set_drvdata(dev, msi);
msi->irqhost = irq_domain_add_linear(dev->dev.of_node,
NR_MSI_IRQS, &fsl_msi_host_ops, msi);
NR_MSI_IRQS_MAX, &fsl_msi_host_ops, msi);
if (msi->irqhost == NULL) {
dev_err(&dev->dev, "No memory for MSI irqhost\n");
......@@ -421,6 +438,16 @@ static int fsl_of_msi_probe(struct platform_device *dev)
}
msi->msiir_offset =
features->msiir_offset + (res.start & 0xfffff);
/*
* First read the MSIIR/MSIIR1 offset from dts
* On failure use the hardcode MSIIR offset
*/
if (of_address_to_resource(dev->dev.of_node, 1, &msiir))
msi->msiir_offset = features->msiir_offset +
(res.start & MSIIR_OFFSET_MASK);
else
msi->msiir_offset = msiir.start & MSIIR_OFFSET_MASK;
}
msi->feature = features->fsl_pic_ip;
......@@ -431,13 +458,35 @@ static int fsl_of_msi_probe(struct platform_device *dev)
*/
msi->phandle = dev->dev.of_node->phandle;
rc = fsl_msi_init_allocator(msi);
if (rc) {
err = fsl_msi_init_allocator(msi);
if (err) {
dev_err(&dev->dev, "Error allocating MSI bitmap\n");
goto error_out;
}
p = of_get_property(dev->dev.of_node, "msi-available-ranges", &len);
if (of_device_is_compatible(dev->dev.of_node, "fsl,mpic-msi-v4.3")) {
msi->srs_shift = MSIIR1_SRS_SHIFT;
msi->ibs_shift = MSIIR1_IBS_SHIFT;
if (p)
dev_warn(&dev->dev, "%s: dose not support msi-available-ranges property\n",
__func__);
for (irq_index = 0; irq_index < NR_MSI_REG_MSIIR1;
irq_index++) {
err = fsl_msi_setup_hwirq(msi, dev,
irq_index, irq_index);
if (err)
goto error_out;
}
} else {
static const u32 all_avail[] =
{ 0, NR_MSI_REG_MSIIR * IRQS_PER_MSI_REG };
msi->srs_shift = MSIIR_SRS_SHIFT;
msi->ibs_shift = MSIIR_IBS_SHIFT;
if (p && len % (2 * sizeof(u32)) != 0) {
dev_err(&dev->dev, "%s: Malformed msi-available-ranges property\n",
__func__);
......@@ -453,7 +502,7 @@ static int fsl_of_msi_probe(struct platform_device *dev)
for (irq_index = 0, i = 0; i < len / (2 * sizeof(u32)); i++) {
if (p[i * 2] % IRQS_PER_MSI_REG ||
p[i * 2 + 1] % IRQS_PER_MSI_REG) {
printk(KERN_WARNING "%s: %s: msi available range of %u at %u is not IRQ-aligned\n",
pr_warn("%s: %s: msi available range of %u at %u is not IRQ-aligned\n",
__func__, dev->dev.of_node->full_name,
p[i * 2 + 1], p[i * 2]);
err = -EINVAL;
......@@ -464,11 +513,13 @@ static int fsl_of_msi_probe(struct platform_device *dev)
count = p[i * 2 + 1] / IRQS_PER_MSI_REG;
for (j = 0; j < count; j++, irq_index++) {
err = fsl_msi_setup_hwirq(msi, dev, offset + j, irq_index);
err = fsl_msi_setup_hwirq(msi, dev, offset + j,
irq_index);
if (err)
goto error_out;
}
}
}
list_add_tail(&msi->list, &msi_head);
......@@ -508,6 +559,10 @@ static const struct of_device_id fsl_of_msi_ids[] = {
.compatible = "fsl,mpic-msi",
.data = &mpic_msi_feature,
},
{
.compatible = "fsl,mpic-msi-v4.3",
.data = &mpic_msi_feature,
},
{
.compatible = "fsl,ipic-msi",
.data = &ipic_msi_feature,
......
arch/powerpc/sysdev/fsl_msi.h
View file @ a12e4537
......@@ -16,9 +16,11 @@
#include <linux/of.h>
#include <asm/msi_bitmap.h>
#define NR_MSI_REG 8
#define NR_MSI_REG_MSIIR 8 /* MSIIR can index 8 MSI registers */
#define NR_MSI_REG_MSIIR1 16 /* MSIIR1 can index 16 MSI registers */
#define NR_MSI_REG_MAX NR_MSI_REG_MSIIR1
#define IRQS_PER_MSI_REG 32
#define NR_MSI_IRQS (NR_MSI_REG * IRQS_PER_MSI_REG)
#define NR_MSI_IRQS_MAX (NR_MSI_REG_MAX * IRQS_PER_MSI_REG)
#define FSL_PIC_IP_MASK 0x0000000F
#define FSL_PIC_IP_MPIC 0x00000001
......@@ -31,9 +33,11 @@ struct fsl_msi {
unsigned long cascade_irq;
u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */
u32 ibs_shift; /* Shift of interrupt bit select */
u32 srs_shift; /* Shift of the shared interrupt register select */
void __iomem *msi_regs;
u32 feature;
int msi_virqs[NR_MSI_REG];
int msi_virqs[NR_MSI_REG_MAX];
struct msi_bitmap bitmap;
......
arch/powerpc/sysdev/fsl_pci.c
View file @ a12e4537
......@@ -26,11 +26,15 @@
#include <linux/memblock.h>
#include <linux/log2.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
#include <asm/machdep.h>
#include <asm/disassemble.h>
#include <asm/ppc-opcode.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
......@@ -64,7 +68,7 @@ static int fsl_pcie_check_link(struct pci_controller *hose)
if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
if (hose->ops->read == fsl_indirect_read_config) {
struct pci_bus bus;
bus.number = 0;
bus.number = hose->first_busno;
bus.sysdata = hose;
bus.ops = hose->ops;
indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val);
......@@ -297,10 +301,10 @@ static void setup_pci_atmu(struct pci_controller *hose)
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
/* Size window to exact size if power-of-two or one size up */
if ((1ull << mem_log) != mem) {
mem_log++;
if ((1ull << mem_log) > mem)
pr_info("%s: Setting PCI inbound window "
"greater than memory size\n", name);
mem_log++;
}
piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);
......@@ -373,7 +377,9 @@ static void setup_pci_atmu(struct pci_controller *hose)
}
if (hose->dma_window_size < mem) {
#ifndef CONFIG_SWIOTLB
#ifdef CONFIG_SWIOTLB
ppc_swiotlb_enable = 1;
#else
pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to "
"map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
name);
......@@ -868,6 +874,160 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose)
return 0;
}
#ifdef CONFIG_E500
static int mcheck_handle_load(struct pt_regs *regs, u32 inst)
{
unsigned int rd, ra, rb, d;
rd = get_rt(inst);
ra = get_ra(inst);
rb = get_rb(inst);
d = get_d(inst);
switch (get_op(inst)) {
case 31:
switch (get_xop(inst)) {
case OP_31_XOP_LWZX:
case OP_31_XOP_LWBRX:
regs->gpr[rd] = 0xffffffff;
break;
case OP_31_XOP_LWZUX:
regs->gpr[rd] = 0xffffffff;
regs->gpr[ra] += regs->gpr[rb];
break;
case OP_31_XOP_LBZX:
regs->gpr[rd] = 0xff;
break;
case OP_31_XOP_LBZUX:
regs->gpr[rd] = 0xff;
regs->gpr[ra] += regs->gpr[rb];
break;
case OP_31_XOP_LHZX:
case OP_31_XOP_LHBRX:
regs->gpr[rd] = 0xffff;
break;
case OP_31_XOP_LHZUX:
regs->gpr[rd] = 0xffff;
regs->gpr[ra] += regs->gpr[rb];
break;
case OP_31_XOP_LHAX:
regs->gpr[rd] = ~0UL;
break;
case OP_31_XOP_LHAUX:
regs->gpr[rd] = ~0UL;
regs->gpr[ra] += regs->gpr[rb];
break;
default:
return 0;
}
break;
case OP_LWZ:
regs->gpr[rd] = 0xffffffff;
break;
case OP_LWZU:
regs->gpr[rd] = 0xffffffff;
regs->gpr[ra] += (s16)d;
break;
case OP_LBZ:
regs->gpr[rd] = 0xff;
break;
case OP_LBZU:
regs->gpr[rd] = 0xff;
regs->gpr[ra] += (s16)d;
break;
case OP_LHZ:
regs->gpr[rd] = 0xffff;
break;
case OP_LHZU:
regs->gpr[rd] = 0xffff;
regs->gpr[ra] += (s16)d;
break;
case OP_LHA:
regs->gpr[rd] = ~0UL;
break;
case OP_LHAU:
regs->gpr[rd] = ~0UL;
regs->gpr[ra] += (s16)d;
break;
default:
return 0;
}
return 1;
}
static int is_in_pci_mem_space(phys_addr_t addr)
{
struct pci_controller *hose;
struct resource *res;
int i;
list_for_each_entry(hose, &hose_list, list_node) {
if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG))
continue;
for (i = 0; i < 3; i++) {
res = &hose->mem_resources[i];
if ((res->flags & IORESOURCE_MEM) &&
addr >= res->start && addr <= res->end)
return 1;
}
}
return 0;
}
int fsl_pci_mcheck_exception(struct pt_regs *regs)
{
u32 inst;
int ret;
phys_addr_t addr = 0;
/* Let KVM/QEMU deal with the exception */
if (regs->msr & MSR_GS)
return 0;
#ifdef CONFIG_PHYS_64BIT
addr = mfspr(SPRN_MCARU);
addr <<= 32;
#endif
addr += mfspr(SPRN_MCAR);
if (is_in_pci_mem_space(addr)) {
if (user_mode(regs)) {
pagefault_disable();
ret = get_user(regs->nip, &inst);
pagefault_enable();
} else {
ret = probe_kernel_address(regs->nip, inst);
}
if (mcheck_handle_load(regs, inst)) {
regs->nip += 4;
return 1;
}
}
return 0;
}
#endif
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static const struct of_device_id pci_ids[] = {
{ .compatible = "fsl,mpc8540-pci", },
......@@ -928,28 +1088,10 @@ static int fsl_pci_probe(struct platform_device *pdev)
{
int ret;
struct device_node *node;
#ifdef CONFIG_SWIOTLB
struct pci_controller *hose;
#endif
node = pdev->dev.of_node;
ret = fsl_add_bridge(pdev, fsl_pci_primary == node);
#ifdef CONFIG_SWIOTLB
if (ret == 0) {
hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
/*
* if we couldn't map all of DRAM via the dma windows
* we need SWIOTLB to handle buffers located outside of
* dma capable memory region
*/
if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
hose->dma_window_size)
ppc_swiotlb_enable = 1;
}
#endif
mpc85xx_pci_err_probe(pdev);
return 0;
......
arch/powerpc/sysdev/fsl_pci.h
View file @ a12e4537
......@@ -126,5 +126,11 @@ static inline int mpc85xx_pci_err_probe(struct platform_device *op)
}
#endif
#ifdef CONFIG_FSL_PCI
extern int fsl_pci_mcheck_exception(struct pt_regs *);
#else
static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; }
#endif
#endif /* __POWERPC_FSL_PCI_H */
#endif /* __KERNEL__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7