powerpc: Add WSP platform

Add a platform for the Wire Speed Processor, based on the PPC A2.

This includes code for the ICS & OPB interrupt controllers, as well
as a SCOM backend, and SCOM based cpu bringup.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jack Miller <jack@codezen.org>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/include/asm/wsp.h

+/*
+ *  Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_POWERPC_WSP_H
+#define __ASM_POWERPC_WSP_H
+
+extern int wsp_get_chip_id(struct device_node *dn);
+
+#endif /* __ASM_POWERPC_WSP_H */

arch/powerpc/kernel/exceptions-64e.S

@@ -864,6 +864,20 @@ have_hes:
 	 * that will have to be made dependent on whether we are running under
 	 * a hypervisor I suppose.
 	 */
+
+	/* BEWARE, MAGIC
+	 * This code is called as an ordinary function on the boot CPU. But to
+	 * avoid duplication, this code is also used in SCOM bringup of
+	 * secondary CPUs. We read the code between the initial_tlb_code_start
+	 * and initial_tlb_code_end labels one instruction at a time and RAM it
+	 * into the new core via SCOM. That doesn't process branches, so there
+	 * must be none between those two labels. It also means if this code
+	 * ever takes any parameters, the SCOM code must also be updated to
+	 * provide them.
+	 */
+	.globl a2_tlbinit_code_start
+a2_tlbinit_code_start:
+
 	ori	r11,r3,MAS0_WQ_ALLWAYS
 	oris	r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
 	mtspr	SPRN_MAS0,r11
@@ -880,6 +894,9 @@ have_hes:
 	/* Write the TLB entry */
 	tlbwe
 
+	.globl a2_tlbinit_after_linear_map
+a2_tlbinit_after_linear_map:
+
 	/* Now we branch the new virtual address mapped by this entry */
 	LOAD_REG_IMMEDIATE(r3,1f)
 	mtctr	r3
@@ -931,10 +948,16 @@ have_hes:
 	cmpw	r3,r9
 	blt	2b
 
+	.globl  a2_tlbinit_after_iprot_flush
+a2_tlbinit_after_iprot_flush:
+
 	PPC_TLBILX(0,0,0)
 	sync
 	isync
 
+	.globl a2_tlbinit_code_end
+a2_tlbinit_code_end:
+
 	/* We translate LR and return */
 	mflr	r3
 	tovirt(r3,r3)

arch/powerpc/platforms/Kconfig

@@ -20,6 +20,7 @@ source "arch/powerpc/platforms/embedded6xx/Kconfig"
 source "arch/powerpc/platforms/44x/Kconfig"
 source "arch/powerpc/platforms/40x/Kconfig"
 source "arch/powerpc/platforms/amigaone/Kconfig"
+source "arch/powerpc/platforms/wsp/Kconfig"
 
 config KVM_GUEST
 	bool "KVM Guest support"

arch/powerpc/platforms/Makefile

@@ -22,3 +22,4 @@ obj-$(CONFIG_PPC_CELL)		+= cell/
 obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_EMBEDDED6xx)	+= embedded6xx/
 obj-$(CONFIG_AMIGAONE)		+= amigaone/
+obj-$(CONFIG_PPC_WSP)		+= wsp/

arch/powerpc/platforms/wsp/Kconfig

+config PPC_WSP
+	bool
+	default n
+
+menu "WSP platform selection"
+	depends on PPC_BOOK3E_64
+
+config PPC_PSR2
+	bool "PSR-2 platform"
+	select PPC_A2
+	select GENERIC_TBSYNC
+	select PPC_SCOM
+	select EPAPR_BOOT
+	select PPC_WSP
+	select PPC_XICS
+	select PPC_ICP_NATIVE
+	default y
+
+endmenu
+
+config PPC_A2_DD2
+	bool "Support for DD2 based A2/WSP systems"
+	depends on PPC_A2
+
+config WORKAROUND_ERRATUM_463
+	depends on PPC_A2_DD2
+	bool "Workaround erratum 463"
+	default y

arch/powerpc/platforms/wsp/Makefile

+ccflags-y			+= -mno-minimal-toc
+
+obj-y				+= setup.o ics.o
+obj-$(CONFIG_PPC_PSR2)		+= psr2.o opb_pic.o
+obj-$(CONFIG_PPC_WSP)		+= scom_wsp.o
+obj-$(CONFIG_SMP)		+= smp.o scom_smp.o

arch/powerpc/platforms/wsp/ics.h

+/*
+ * Copyright 2009 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ICS_H
+#define __ICS_H
+
+#define XIVE_ADDR_MASK		0x7FFULL
+
+extern void wsp_init_irq(void);
+
+extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
+extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
+
+#endif /* __ICS_H */

arch/powerpc/platforms/wsp/opb_pic.c

+/*
+ * IBM Onboard Peripheral Bus Interrupt Controller
+ *
+ * Copyright 2010 Jack Miller, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#include <asm/reg_a2.h>
+#include <asm/irq.h>
+
+#define OPB_NR_IRQS 32
+
+#define OPB_MLSASIER	0x04    /* MLS Accumulated Status IER */
+#define OPB_MLSIR	0x50	/* MLS Interrupt Register */
+#define OPB_MLSIER	0x54	/* MLS Interrupt Enable Register */
+#define OPB_MLSIPR	0x58	/* MLS Interrupt Polarity Register */
+#define OPB_MLSIIR	0x5c	/* MLS Interrupt Inputs Register */
+
+static int opb_index = 0;
+
+struct opb_pic {
+	struct irq_host *host;
+	void *regs;
+	int index;
+	spinlock_t lock;
+};
+
+static u32 opb_in(struct opb_pic *opb, int offset)
+{
+	return in_be32(opb->regs + offset);
+}
+
+static void opb_out(struct opb_pic *opb, int offset, u32 val)
+{
+	out_be32(opb->regs + offset, val);
+}
+
+static void opb_unmask_irq(struct irq_data *d)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	u32 ier, bitset;
+
+	opb = d->chip_data;
+	bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	ier = opb_in(opb, OPB_MLSIER);
+	opb_out(opb, OPB_MLSIER, ier | bitset);
+	ier = opb_in(opb, OPB_MLSIER);
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_mask_irq(struct irq_data *d)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	u32 ier, mask;
+
+	opb = d->chip_data;
+	mask = ~(1 << (31 - irqd_to_hwirq(d)));
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	ier = opb_in(opb, OPB_MLSIER);
+	opb_out(opb, OPB_MLSIER, ier & mask);
+	ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_ack_irq(struct irq_data *d)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	u32 bitset;
+
+	opb = d->chip_data;
+	bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	opb_out(opb, OPB_MLSIR, bitset);
+	opb_in(opb, OPB_MLSIR); // Flush posted writes
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_mask_ack_irq(struct irq_data *d)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	u32 bitset;
+	u32 ier, ir;
+
+	opb = d->chip_data;
+	bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	ier = opb_in(opb, OPB_MLSIER);
+	opb_out(opb, OPB_MLSIER, ier & ~bitset);
+	ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
+
+	opb_out(opb, OPB_MLSIR, bitset);
+	ir = opb_in(opb, OPB_MLSIR); // Flush posted writes
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static int opb_set_irq_type(struct irq_data *d, unsigned int flow)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	int invert, ipr, mask, bit;
+
+	opb = d->chip_data;
+
+	/* The only information we're interested in in the type is whether it's
+	 * a high or low trigger. For high triggered interrupts, the polarity
+	 * set for it in the MLS Interrupt Polarity Register is 0, for low
+	 * interrupts it's 1 so that the proper input in the MLS Interrupt Input
+	 * Register is interrupted as asserting the interrupt. */
+
+	switch (flow) {
+		case IRQ_TYPE_NONE:
+			opb_mask_irq(d);
+			return 0;
+
+		case IRQ_TYPE_LEVEL_HIGH:
+			invert = 0;
+			break;
+
+		case IRQ_TYPE_LEVEL_LOW:
+			invert = 1;
+			break;
+
+		default:
+			return -EINVAL;
+	}
+
+	bit = (1 << (31 - irqd_to_hwirq(d)));
+	mask = ~bit;
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	ipr = opb_in(opb, OPB_MLSIPR);
+	ipr = (ipr & mask) | (invert ? bit : 0);
+	opb_out(opb, OPB_MLSIPR, ipr);
+	ipr = opb_in(opb, OPB_MLSIPR);  // Flush posted writes
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+
+	/* Record the type in the interrupt descriptor */
+	irqd_set_trigger_type(d, flow);
+
+	return 0;
+}
+
+static struct irq_chip opb_irq_chip = {
+	.name		= "OPB",
+	.irq_mask	= opb_mask_irq,
+	.irq_unmask	= opb_unmask_irq,
+	.irq_mask_ack	= opb_mask_ack_irq,
+	.irq_ack	= opb_ack_irq,
+	.irq_set_type	= opb_set_irq_type
+};
+
+static int opb_host_map(struct irq_host *host, unsigned int virq,
+		irq_hw_number_t hwirq)
+{
+	struct opb_pic *opb;
+
+	opb = host->host_data;
+
+	/* Most of the important stuff is handled by the generic host code, like
+	 * the lookup, so just attach some info to the virtual irq */
+
+	irq_set_chip_data(virq, opb);
+	irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq);
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int opb_host_xlate(struct irq_host *host, struct device_node *dn,
+		const u32 *intspec, unsigned int intsize,
+		irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+	/* Interrupt size must == 2 */
+	BUG_ON(intsize != 2);
+	*out_hwirq = intspec[0];
+	*out_type = intspec[1];
+	return 0;
+}
+
+static struct irq_host_ops opb_host_ops = {
+	.map = opb_host_map,
+	.xlate = opb_host_xlate,
+};
+
+irqreturn_t opb_irq_handler(int irq, void *private)
+{
+	struct opb_pic *opb;
+	u32 ir, src, subvirq;
+
+	opb = (struct opb_pic *) private;
+
+	/* Read the OPB MLS Interrupt Register for
+	 * asserted interrupts */
+	ir = opb_in(opb, OPB_MLSIR);
+	if (!ir)
+		return IRQ_NONE;
+
+	do {
+		/* Get 1 - 32 source, *NOT* bit */
+		src = 32 - ffs(ir);
+
+		/* Translate from the OPB's conception of interrupt number to
+		 * Linux's virtual IRQ */
+
+		subvirq = irq_linear_revmap(opb->host, src);
+
+		generic_handle_irq(subvirq);
+	} while ((ir = opb_in(opb, OPB_MLSIR)));
+
+	return IRQ_HANDLED;
+}
+
+struct opb_pic *opb_pic_init_one(struct device_node *dn)
+{
+	struct opb_pic *opb;
+	struct resource res;
+
+	if (of_address_to_resource(dn, 0, &res)) {
+		printk(KERN_ERR "opb: Couldn't translate resource\n");
+		return  NULL;
+	}
+
+	opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL);
+	if (!opb) {
+		printk(KERN_ERR "opb: Failed to allocate opb struct!\n");
+		return NULL;
+	}
+
+	/* Get access to the OPB MMIO registers */
+	opb->regs = ioremap(res.start + 0x10000, 0x1000);
+	if (!opb->regs) {
+		printk(KERN_ERR "opb: Failed to allocate register space!\n");
+		goto free_opb;
+	}
+
+	/* Allocate an irq host so that Linux knows that despite only
+	 * having one interrupt to issue, we're the controller for multiple
+	 * hardware IRQs, so later we can lookup their virtual IRQs. */
+
+	opb->host = irq_alloc_host(dn, IRQ_HOST_MAP_LINEAR,
+			OPB_NR_IRQS, &opb_host_ops, -1);
+
+	if (!opb->host) {
+		printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
+		goto free_regs;
+	}
+
+	opb->index = opb_index++;
+	spin_lock_init(&opb->lock);
+	opb->host->host_data = opb;
+
+	/* Disable all interrupts by default */
+	opb_out(opb, OPB_MLSASIER, 0);
+	opb_out(opb, OPB_MLSIER, 0);
+
+	/* ACK any interrupts left by FW */
+	opb_out(opb, OPB_MLSIR, 0xFFFFFFFF);
+
+	return opb;
+
+free_regs:
+	iounmap(opb->regs);
+free_opb:
+	kfree(opb);
+	return NULL;
+}
+
+void __init opb_pic_init(void)
+{
+	struct device_node *dn;
+	struct opb_pic *opb;
+	int virq;
+	int rc;
+
+	/* Call init_one for each OPB device */
+	for_each_compatible_node(dn, NULL, "ibm,opb") {
+
+		/* Fill in an OPB struct */
+		opb = opb_pic_init_one(dn);
+		if (!opb) {
+			printk(KERN_WARNING "opb: Failed to init node, skipped!\n");
+			continue;
+		}
+
+		/* Map / get opb's hardware virtual irq */
+		virq = irq_of_parse_and_map(dn, 0);
+		if (virq <= 0) {
+			printk("opb: irq_op_parse_and_map failed!\n");
+			continue;
+		}
+
+		/* Attach opb interrupt handler to new virtual IRQ */
+		rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
+		if (rc) {
+			printk("opb: request_irq failed: %d\n", rc);
+			continue;
+		}
+
+		printk("OPB%d init with %d IRQs at %p\n", opb->index,
+				OPB_NR_IRQS, opb->regs);
+	}
+}

arch/powerpc/platforms/wsp/psr2.c

+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+
+static void psr2_spin(void)
+{
+	hard_irq_disable();
+	for (;;) ;
+}
+
+static void psr2_restart(char *cmd)
+{
+	psr2_spin();
+}
+
+static int psr2_probe_devices(void)
+{
+	struct device_node *np;
+
+	/* Our RTC is a ds1500. It seems to be programatically compatible
+	 * with the ds1511 for which we have a driver so let's use that
+	 */
+	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+	if (np != NULL) {
+		struct resource res;
+		if (of_address_to_resource(np, 0, &res) == 0)
+			platform_device_register_simple("ds1511", 0, &res, 1);
+	}
+	return 0;
+}
+machine_arch_initcall(psr2_md, psr2_probe_devices);
+
+static void __init psr2_setup_arch(void)
+{
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	scom_init_wsp();
+
+	/* Setup SMP callback */
+#ifdef CONFIG_SMP
+	a2_setup_smp();
+#endif
+}
+
+static int __init psr2_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
+		return 0;
+
+	return 1;
+}
+
+static void __init psr2_init_irq(void)
+{
+	wsp_init_irq();
+	opb_pic_init();
+}
+
+define_machine(psr2_md) {
+	.name			= "PSR2 A2",
+	.probe			= psr2_probe,
+	.setup_arch		= psr2_setup_arch,
+	.restart		= psr2_restart,
+	.power_off		= psr2_spin,
+	.halt			= psr2_spin,
+	.calibrate_decr		= generic_calibrate_decr,
+	.init_IRQ		= psr2_init_irq,
+	.progress		= udbg_progress,
+	.power_save		= book3e_idle,
+};

arch/powerpc/platforms/wsp/scom_wsp.c

+/*
+ *  SCOM backend for WSP
+ *
+ *  Copyright 2010 Benjamin Herrenschmidt, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/cputhreads.h>
+#include <asm/reg_a2.h>
+#include <asm/scom.h>
+#include <asm/udbg.h>
+
+#include "wsp.h"
+
+
+static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count)
+{
+	struct resource r;
+	u64 xscom_addr;
+
+	if (!of_get_property(dev, "scom-controller", NULL)) {
+		pr_err("%s: device %s is not a SCOM controller\n",
+			__func__, dev->full_name);
+		return SCOM_MAP_INVALID;
+	}
+
+	if (of_address_to_resource(dev, 0, &r)) {
+		pr_debug("Failed to find SCOM controller address\n");
+		return 0;
+	}
+
+	/* Transform the SCOM address into an XSCOM offset */
+	xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3);
+
+	return (scom_map_t)ioremap(r.start + xscom_addr, count << 3);
+}
+
+static void wsp_scom_unmap(scom_map_t map)
+{
+	iounmap((void *)map);
+}
+
+static u64 wsp_scom_read(scom_map_t map, u32 reg)
+{
+	u64 __iomem *addr = (u64 __iomem *)map;
+
+	return in_be64(addr + reg);
+}
+
+static void wsp_scom_write(scom_map_t map, u32 reg, u64 value)
+{
+	u64 __iomem *addr = (u64 __iomem *)map;
+
+	return out_be64(addr + reg, value);
+}
+
+static const struct scom_controller wsp_scom_controller = {
+	.map	= wsp_scom_map,
+	.unmap	= wsp_scom_unmap,
+	.read	= wsp_scom_read,
+	.write	= wsp_scom_write
+};
+
+void scom_init_wsp(void)
+{
+	scom_init(&wsp_scom_controller);
+}

arch/powerpc/platforms/wsp/setup.c

+/*
+ * Copyright 2010 Michael Ellerman, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include "wsp.h"
+
+/*
+ * Find chip-id by walking up device tree looking for ibm,wsp-chip-id property.
+ * Won't work for nodes that are not a descendant of a wsp node.
+ */
+int wsp_get_chip_id(struct device_node *dn)
+{
+	const u32 *p;
+	int rc;
+
+	/* Start looking at the specified node, not its parent */
+	dn = of_node_get(dn);
+	while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL)))
+		dn = of_get_next_parent(dn);
+
+	if (!dn)
+		return -1;
+
+	rc = *p;
+	of_node_put(dn);
+
+	return rc;
+}

arch/powerpc/platforms/wsp/smp.c

+/*
+ *  SMP Support for A2 platforms
+ *
+ *  Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/dbell.h>
+#include <asm/machdep.h>
+#include <asm/xics.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+static void __devinit smp_a2_setup_cpu(int cpu)
+{
+	doorbell_setup_this_cpu();
+
+	if (cpu != boot_cpuid)
+		xics_setup_cpu();
+}
+
+int __devinit smp_a2_kick_cpu(int nr)
+{
+	const char *enable_method;
+	struct device_node *np;
+	int thr_idx;
+
+	if (nr < 0 || nr >= NR_CPUS)
+		return -ENOENT;
+
+	np = of_get_cpu_node(nr, &thr_idx);
+	if (!np)
+		return -ENODEV;
+
+	enable_method = of_get_property(np, "enable-method", NULL);
+	pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method);
+
+	if (!enable_method) {
+                printk(KERN_ERR "CPU%d has no enable-method\n", nr);
+		return -ENOENT;
+	} else if (strcmp(enable_method, "ibm,a2-scom") == 0) {
+		if (a2_scom_startup_cpu(nr, thr_idx, np))
+			return -1;
+	} else {
+		printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n",
+                       nr, enable_method);
+		return -EINVAL;
+	}
+
+	/*
+	 * The processor is currently spinning, waiting for the
+	 * cpu_start field to become non-zero After we set cpu_start,
+	 * the processor will continue on to secondary_start
+	 */
+	paca[nr].cpu_start = 1;
+
+	return 0;
+}
+
+static int __init smp_a2_probe(void)
+{
+	return cpus_weight(cpu_possible_map);
+}
+
+static struct smp_ops_t a2_smp_ops = {
+	.message_pass	= doorbell_message_pass,
+	.probe		= smp_a2_probe,
+	.kick_cpu	= smp_a2_kick_cpu,
+	.setup_cpu	= smp_a2_setup_cpu,
+};
+
+void __init a2_setup_smp(void)
+{
+	smp_ops = &a2_smp_ops;
+}

arch/powerpc/platforms/wsp/wsp.h

+#ifndef __WSP_H
+#define __WSP_H
+
+#include <asm/wsp.h>
+
+extern void wsp_setup_pci(void);
+extern void scom_init_wsp(void);
+
+extern void a2_setup_smp(void);
+extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
+			       struct device_node *np);
+int smp_a2_cpu_bootable(unsigned int nr);
+int __devinit smp_a2_kick_cpu(int nr);
+
+void opb_pic_init(void);
+
+#endif /*  __WSP_H */

arch/powerpc/sysdev/xics/icp-native.c

@@ -7,6 +7,7 @@
  *  2 of the License, or (at your option) any later version.
  *
  */
+
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>