Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

Documentation/devicetree/bindings/arm/armada-38x.txt

@@ -15,6 +15,13 @@ Required root node property:
 
 compatible: must contain "marvell,armada385"
 
+In addition, boards using the Marvell Armada 388 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada388"
+
 Example:
 
 compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";

Documentation/devicetree/bindings/arm/digicolor.txt

+Conexant Digicolor Platforms Device Tree Bindings
+
+Each device tree must specify which Conexant Digicolor SoC it uses.
+Must be the following compatible string:
+
+  cnxt,cx92755

Documentation/devicetree/bindings/arm/exynos/power_domain.txt

@@ -23,7 +23,7 @@ Optional Properties:
 		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
 		are supported currently.
 
-Node of a device using power domains must have a samsung,power-domain property
+Node of a device using power domains must have a power-domains property
 defined with a phandle to respective power domain.
 
 Example:

Documentation/devicetree/bindings/arm/fsl.txt

@@ -124,3 +124,11 @@ Example:
 		compatible = "fsl,ls1021a-dcfg";
 		reg = <0x0 0x1ee0000 0x0 0x10000>;
 	};
+
+Freescale LS2085A SoC Device Tree Bindings
+------------------------------------------
+
+LS2085A ARMv8 based Simulator model
+Required root node properties:
+    - compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -9,6 +9,10 @@ HiP04 D01 Board
 Required root node properties:
 	- compatible = "hisilicon,hip04-d01";
 
+HiP01 ca9x2 Board
+Required root node properties:
+	- compatible = "hisilicon,hip01-ca9x2";
+
 
 Hisilicon system controller
 
@@ -36,6 +40,27 @@ Example:
 		reboot-offset = <0x4>;
 	};
 
+-----------------------------------------------------------------------
+Hisilicon HiP01 system controller
+
+Required properties:
+- compatible : "hisilicon,hip01-sysctrl"
+- reg : Register address and size
+
+The HiP01 system controller is mostly compatible with hisilicon
+system controller,but it has some specific control registers for
+HIP01 SoC family, such as slave core boot, and also some same
+registers located at different offset.
+
+Example:
+
+	/* for hip01-ca9x2 */
+	sysctrl: system-controller@10000000 {
+		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+		reg = <0x10000000 0x1000>;
+		reboot-offset = <0x4>;
+	};
+
 -----------------------------------------------------------------------
 Hisilicon CPU controller
 

Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt

@@ -7,6 +7,7 @@ Required properties:
 - compatible: should be one of:
 	"mediatek,mt8135-sysirq"
 	"mediatek,mt8127-sysirq"
+	"mediatek,mt6592-sysirq"
 	"mediatek,mt6589-sysirq"
 	"mediatek,mt6582-sysirq"
 	"mediatek,mt6577-sysirq"

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -9,6 +9,16 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
+- ChipSPARK Rayeager PX2 board:
+    Required root node properties:
+      - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
+
 - Radxa Rock board:
     Required root node properties:
       - compatible = "radxa,rock", "rockchip,rk3188";
+
+- Firefly Firefly-RK3288 board:
+    Required root node properties:
+      - compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
+    or
+      - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt

+SAMSUNG Exynos SoCs Chipid driver.
+
+Required properties:
+- compatible : Should at least contain "samsung,exynos4210-chipid".
+
+- reg: offset and length of the register set
+
+Example:
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};

Documentation/devicetree/bindings/arm/sirf.txt

@@ -3,7 +3,9 @@ CSR SiRFprimaII and SiRFmarco device tree bindings.
 
 Required root node properties:
     - compatible:
+    - "sirf,atlas6-cb" : atlas6 "cb" evaluation board
+    - "sirf,atlas6" : atlas6 device based board
+    - "sirf,atlas7-cb" : atlas7 "cb" evaluation board
+    - "sirf,atlas7" : atlas7 device based board
     - "sirf,prima2-cb" : prima2 "cb" evaluation board
-    - "sirf,marco-cb" : marco "cb" evaluation board
     - "sirf,prima2" : prima2 device based board
-    - "sirf,marco" : marco device based board

Documentation/devicetree/bindings/bus/mvebu-mbus.txt

@@ -6,8 +6,8 @@ Required properties:
 - compatible:	 Should be set to one of the following:
 		 marvell,armada370-mbus
 		 marvell,armadaxp-mbus
-		 marvell,armada370-mbus
-		 marvell,armadaxp-mbus
+		 marvell,armada375-mbus
+		 marvell,armada380-mbus
 		 marvell,kirkwood-mbus
 		 marvell,dove-mbus
 		 marvell,orion5x-88f5281-mbus

Documentation/devicetree/bindings/clock/alphascale,acc.txt

+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible of choising proper
+clock source, setting deviders and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM		0
+CLKID_AHB_RAM		1
+CLKID_AHB_GPIO		2
+CLKID_AHB_MAC		3
+CLKID_AHB_EMI		4
+CLKID_AHB_USB0		5
+CLKID_AHB_USB1		6
+CLKID_AHB_DMA0		7
+CLKID_AHB_DMA1		8
+CLKID_AHB_UART0		9
+CLKID_AHB_UART1		10
+CLKID_AHB_UART2		11
+CLKID_AHB_UART3		12
+CLKID_AHB_UART4		13
+CLKID_AHB_UART5		14
+CLKID_AHB_UART6		15
+CLKID_AHB_UART7		16
+CLKID_AHB_UART8		17
+CLKID_AHB_UART9		18
+CLKID_AHB_I2S0		19
+CLKID_AHB_I2C0		20
+CLKID_AHB_I2C1		21
+CLKID_AHB_SSP0		22
+CLKID_AHB_IOCONFIG	23
+CLKID_AHB_WDT		24
+CLKID_AHB_CAN0		25
+CLKID_AHB_CAN1		26
+CLKID_AHB_MPWM		27
+CLKID_AHB_SPI0		28
+CLKID_AHB_SPI1		29
+CLKID_AHB_QEI		30
+CLKID_AHB_QUADSPI0	31
+CLKID_AHB_CAMIF		32
+CLKID_AHB_LCDIF		33
+CLKID_AHB_TIMER0	34
+CLKID_AHB_TIMER1	35
+CLKID_AHB_TIMER2	36
+CLKID_AHB_TIMER3	37
+CLKID_AHB_IRQ		38
+CLKID_AHB_RTC		39
+CLKID_AHB_NAND		40
+CLKID_AHB_ADC0		41
+CLKID_AHB_LED		42
+CLKID_AHB_DAC0		43
+CLKID_AHB_LCD		44
+CLKID_AHB_I2S1		45
+CLKID_AHB_MAC1		46
+
+CLKID_SYS_CPU		47
+CLKID_SYS_AHB		48
+CLKID_SYS_I2S0M		49
+CLKID_SYS_I2S0S		50
+CLKID_SYS_I2S1M		51
+CLKID_SYS_I2S1S		52
+CLKID_SYS_UART0		53
+CLKID_SYS_UART1		54
+CLKID_SYS_UART2		55
+CLKID_SYS_UART3		56
+CLKID_SYS_UART4		56
+CLKID_SYS_UART5		57
+CLKID_SYS_UART6		58
+CLKID_SYS_UART7		59
+CLKID_SYS_UART8		60
+CLKID_SYS_UART9		61
+CLKID_SYS_SPI0		62
+CLKID_SYS_SPI1		63
+CLKID_SYS_QUADSPI	64
+CLKID_SYS_SSP0		65
+CLKID_SYS_NAND		66
+CLKID_SYS_TRACE		67
+CLKID_SYS_CAMM		68
+CLKID_SYS_WDT		69
+CLKID_SYS_CLKOUT	70
+CLKID_SYS_MAC		71
+CLKID_SYS_LCD		72
+CLKID_SYS_ADCANA	73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+	compatible = "alphascale,asm9260-uart";
+	reg = <0x80010000 0x4000>;
+	clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+	interrupts = <19>;
+	status = "disabled";
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+	compatible = "alphascale,asm9260-timer";
+	reg = <0x80088000 0x4000>;
+	clocks = <&acc CLKID_AHB_TIMER0>;
+	interrupts = <29>;
+};
+

Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt

@@ -45,7 +45,7 @@ Required properties:
 	       Exynos4 SoCs, there needs no "master" clock.
 	       Exynos5 SoCs, some System MMUs must have "master" clocks.
 - clocks: Required if the System MMU is needed to gate its clock.
-- samsung,power-domain: Required if the System MMU is needed to gate its power.
+- power-domains: Required if the System MMU is needed to gate its power.
 	  Please refer to the following document:
 	  Documentation/devicetree/bindings/arm/exynos/power_domain.txt
 
@@ -54,7 +54,7 @@ Examples:
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 	};
@@ -66,5 +66,5 @@ Examples:
 		interrupts = <2 0>;
 		clock-names = "sysmmu", "master";
 		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 	};

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -28,7 +28,7 @@ Required properties:
 		    for DMA contiguous memory allocation and its size.
 
 Optional properties:
-  - samsung,power-domain : power-domain property defined with a phandle
+  - power-domains : power-domain property defined with a phandle
 			   to respective power domain.
 
 Example:
@@ -38,7 +38,7 @@ mfc: codec@13400000 {
 	compatible = "samsung,mfc-v5";
 	reg = <0x13400000 0x10000>;
 	interrupts = <0 94 0>;
-	samsung,power-domain = <&pd_mfc>;
+	power-domains = <&pd_mfc>;
 	clocks = <&clock 273>;
 	clock-names = "mfc";
 };

Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt

+DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
+=================================================================
+
+Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
+These memory controllers differ from one SoC variant to another, and are called
+by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
+(DBSC3)", "SDRAM Bus State Controller (SBSC)").
+
+Currently memory controller device nodes are used only to reference PM
+domains, and prevent these PM domains from being powered down, which would
+crash the system.
+
+As there exist no actual drivers for these controllers yet, these bindings
+should be considered EXPERIMENTAL for now.
+
+Required properties:
+  - compatible: Must be one of the following SoC-specific values:
+		  - "renesas,dbsc-r8a73a4" (R-Mobile APE6)
+		  - "renesas,dbsc3-r8a7740" (R-Mobile A1)
+		  - "renesas,sbsc-sh73a0" (SH-Mobile AG5)
+  - reg: Must contain the base address and length of the memory controller's
+	 registers.
+
+Optional properties:
+  - interrupts: Must contain a list of interrupt specifiers for memory
+		controller interrupts, if available.
+  - interrupts-names: Must contain a list of interrupt names corresponding to
+		      the interrupts in the interrupts property, if available.
+		      Valid interrupt names are:
+			- "sec" (secure interrupt)
+			- "temp" (normal (temperature) interrupt)
+  - power-domains: Must contain a reference to the PM domain that the memory
+		   controller belongs to, if available.
+
+Example:
+
+	sbsc1: memory-controller@fe400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfe400000 0x400>;
+		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+		power-domains = <&pd_a4bc0>;
+	};

Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt

+* Freescale Management Complex
+
+The Freescale Management Complex (fsl-mc) is a hardware resource
+manager that manages specialized hardware objects used in
+network-oriented packet processing applications. After the fsl-mc
+block is enabled, pools of hardware resources are available, such as
+queues, buffer pools, I/O interfaces. These resources are building
+blocks that can be used to create functional hardware objects/devices
+such as network interfaces, crypto accelerator instances, L2 switches,
+etc.
+
+Required properties:
+
+    - compatible
+        Value type: <string>
+        Definition: Must be "fsl,qoriq-mc".  A Freescale Management Complex
+                    compatible with this binding must have Block Revision
+                    Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+                    the MC control register region.
+
+    - reg
+        Value type: <prop-encoded-array>
+        Definition: A standard property.  Specifies one or two regions
+                    defining the MC's registers:
+
+                       -the first region is the command portal for the
+                        this machine and must always be present
+
+                       -the second region is the MC control registers. This
+                        region may not be present in some scenarios, such
+                        as in the device tree presented to a virtual machine.
+
+Example:
+
+        fsl_mc: fsl-mc@80c000000 {
+                compatible = "fsl,qoriq-mc";
+                reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
+                      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+        };
+

Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt

+DT bindings for the Renesas R-Mobile System Controller
+
+== System Controller Node ==
+
+The R-Mobile System Controller provides the following functions:
+  - Boot mode management,
+  - Reset generation,
+  - Power management.
+
+Required properties:
+- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
+	      fallback.
+	      Examples with soctypes are:
+		- "renesas,sysc-r8a7740" (R-Mobile A1)
+		- "renesas,sysc-sh73a0" (SH-Mobile AG5)
+- reg: Two address start and address range blocks for the device:
+         - The first block refers to the normally accessible registers,
+         - the second block refers to the registers protected by the HPB
+	   semaphore.
+
+Optional nodes:
+- pm-domains: This node contains a hierarchy of PM domain nodes, which should
+  match the Power Area Hierarchy in the Power Domain Specifications section of
+  the device's datasheet.
+
+
+== PM Domain Nodes ==
+
+Each of the PM domain nodes represents a PM domain, as documented by the
+generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
+
+The nodes should be named by the real power area names, and thus their names
+should be unique.
+
+Required properties:
+  - #power-domain-cells: Must be 0.
+
+Optional properties:
+- reg: If the PM domain is not always-on, this property must contain the bit
+       index number for the corresponding power area in the various Power
+       Control and Status Registers. The parent's node must contain the
+       following two properties:
+	 - #address-cells: Must be 1,
+	 - #size-cells: Must be 0.
+       If the PM domain is always-on, this property must be omitted.
+
+
+Example:
+
+This shows a subset of the r8a7740 PM domain hierarchy, containing the
+C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain,
+which is a subdomain of A4S.
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_a4s: a4s@10 {
+					reg = <10>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sp: a3sp@11 {
+						reg = <11>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4su: a4su@20 {
+					reg = <20>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+	};
+
+
+== PM Domain Consumers ==
+
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node.
+
+Example:
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x100>;
+		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+		power-domains = <&pd_a3sp>;
+		#pwm-cells = <3>;
+	};

Documentation/devicetree/bindings/serial/mtk-uart.txt

@@ -2,6 +2,8 @@
 
 Required properties:
 - compatible should contain:
+  * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+  * "mediatek,mt8127-uart" for MT8127 compatible UARTS
   * "mediatek,mt6589-uart" for MT6589 compatible UARTS
   * "mediatek,mt6582-uart" for MT6582 compatible UARTS
   * "mediatek,mt6577-uart" for all compatible UARTS (MT6589, MT6582, MT6577)

Documentation/devicetree/bindings/serial/of-serial.txt

@@ -19,6 +19,7 @@ Required properties:
 	- "altr,16550-FIFO64"
 	- "altr,16550-FIFO128"
 	- "fsl,16550-FIFO64"
+	- "fsl,ns16550"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.
@@ -43,6 +44,17 @@ Optional properties:
   driver is allowed to detect support for the capability even without this
   property.
 
+Note:
+* fsl,ns16550:
+  ------------
+  Freescale DUART is very similar to the PC16552D (and to a
+  pair of NS16550A), albeit with some nonstandard behavior such as
+  erratum A-004737 (relating to incorrect BRK handling).
+
+  Represents a single port that is compatible with the DUART found
+  on many Freescale chips (examples include mpc8349, mpc8548,
+  mpc8641d, p4080 and ls2085a).
+
 Example:
 
 	uart@80230000 {

Documentation/devicetree/bindings/sound/atmel_ac97c.txt

+* Atmel AC97 controller
+
+Required properties:
+  - compatible: "atmel,at91sam9263-ac97c"
+  - reg: Address and length of the register set for the device
+  - interrupts: Should contain AC97 interrupt
+  - ac97-gpios: Please refer to soc-ac97link.txt, only ac97-reset is used
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound@fffa0000 {
+       compatible = "atmel,at91sam9263-ac97c";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ac97>;
+       reg = <0xfffa0000 0x4000>;
+       interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+
+       ac97-gpios = <&pioB 0 0 &pioB 2 0 &pioC 29 GPIO_ACTIVE_LOW>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -12,6 +12,7 @@ adh	AD Holdings Plc.
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
 allwinner	Allwinner Technology Co., Ltd.
+alphascale	AlphaScale Integrated Circuits Systems, Inc.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 amd	Advanced Micro Devices (AMD), Inc.
@@ -34,9 +35,11 @@ capella	Capella Microsystems, Inc
 cavium	Cavium, Inc.
 cdns	Cadence Design Systems Inc.
 chipidea	Chipidea, Inc
+chipspark	ChipSPARK
 chrp	Common Hardware Reference Platform
 chunghwa	Chunghwa Picture Tubes Ltd.
 cirrus	Cirrus Logic, Inc.
+cloudengines	Cloud Engines, Inc.
 cnm	Chips&Media, Inc.
 cnxt	Conexant Systems, Inc.
 cortina	Cortina Systems, Inc.
@@ -65,6 +68,7 @@ everest	Everest Semiconductor Co. Ltd.
 everspin	Everspin Technologies, Inc.
 excito	Excito
 fcs	Fairchild Semiconductor
+firefly	Firefly
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.

Documentation/devicetree/bindings/video/exynos_dsim.txt

@@ -21,7 +21,7 @@ Required properties:
     according to DSI host bindings (see MIPI DSI bindings [1])
 
 Optional properties:
-  - samsung,power-domain: a phandle to DSIM power domain node
+  - power-domains: a phandle to DSIM power domain node
 
 Child nodes:
   Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
@@ -53,7 +53,7 @@ Example:
 		phy-names = "dsim";
 		vddcore-supply = <&vusb_reg>;
 		vddio-supply = <&vmipi_reg>;
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,pll-clock-frequency = <24000000>;

Documentation/devicetree/bindings/video/samsung-fimd.txt

@@ -38,7 +38,7 @@ Required properties:
                property. Must contain "sclk_fimd" and "fimd".
 
 Optional Properties:
-- samsung,power-domain: a phandle to FIMD power domain node.
+- power-domains: a phandle to FIMD power domain node.
 - samsung,invert-vden: video enable signal is inverted
 - samsung,invert-vclk: video clock signal is inverted
 - display-timings: timing settings for FIMD, as described in document [1].
@@ -97,7 +97,7 @@ SoC specific DT entry:
 		interrupts = <11 0>, <11 1>, <11 2>;
 		clocks = <&clock 140>, <&clock 283>;
 		clock-names = "sclk_fimd", "fimd";
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/alphascale-asm9260-devkit.dts

+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+	model = "Alphascale asm9260 Development Kit";
+	compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+};

arch/arm/boot/dts/alphascale-asm9260.dtsi

+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x2000000>;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			clocks = <&acc CLKID_SYS_CPU>;
+		};
+	};
+
+	osc24m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-accuracy = <30000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		acc: clock-controller@80040000 {
+			compatible = "alphascale,asm9260-clock-controller";
+			#clock-cells = <1>;
+			clocks = <&osc24m>;
+			reg = <0x80040000 0x204>;
+		};
+
+		icoll: interrupt-controller@80054000 {
+			compatible = "alphascale,asm9260-icoll";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x80054000 0x200>;
+		};
+
+		timer0: timer@80088000 {
+			compatible = "alphascale,asm9260-timer";
+			reg = <0x80088000 0x4000>;
+			clocks = <&acc CLKID_AHB_TIMER0>;
+			interrupts = <29>;
+		};
+	};
+};

arch/arm/boot/dts/am4372.dtsi

@@ -948,6 +948,22 @@ dcan1: can@481d0000 {
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		vpfe0: vpfe@48326000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48326000 0x2000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe0";
+			status = "disabled";
+		};
+
+		vpfe1: vpfe@48328000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48328000 0x2000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe1";
+			status = "disabled";
+		};
 	};
 };
 

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -268,6 +268,78 @@ dcan1_default: dcan1_default_pins {
 			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
 		>;
 	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_default: vpfe1_pins_default {
+		pinctrl-single,pins = <
+			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_sleep: vpfe1_pins_sleep {
+		pinctrl-single,pins = <
+			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+		>;
+	};
 };
 
 &i2c0 {
@@ -545,3 +617,37 @@ &dcan1 {
 	pinctrl-0 = <&dcan1_default>;
 	status = "okay";
 };
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	port {
+		vpfe0_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -243,6 +243,42 @@ lcd_pins: lcd_pins {
 				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
+
+		vpfe1_pins_default: vpfe1_pins_default {
+			pinctrl-single,pins = <
+				0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+			>;
+		};
+
+		vpfe1_pins_sleep: vpfe1_pins_sleep {
+			pinctrl-single,pins = <
+				0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -634,3 +670,20 @@ dpi_out: endpoint@0 {
 		};
 	};
 };
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -80,6 +80,28 @@ led@3 {
 			default-state = "off";
 		};
 	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&extcon_usb1_pins>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&extcon_usb2_pins>;
+	};
 };
 
 &dra7_pmx_core {
@@ -140,6 +162,86 @@ mmc2_pins_default: mmc2_pins_default {
 		>;
 	};
 
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_INPUT | MUX_MODE15)
+			0x254 (PIN_INPUT | MUX_MODE15)
+			0x258 (PIN_INPUT | MUX_MODE15)
+			0x25c (PIN_INPUT | MUX_MODE15)
+			0x260 (PIN_INPUT | MUX_MODE15)
+			0x264 (PIN_INPUT | MUX_MODE15)
+			0x268 (PIN_INPUT | MUX_MODE15)
+			0x26c (PIN_INPUT | MUX_MODE15)
+			0x270 (PIN_INPUT | MUX_MODE15)
+			0x274 (PIN_INPUT | MUX_MODE15)
+			0x278 (PIN_INPUT | MUX_MODE15)
+			0x27c (PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			0x198 (PIN_INPUT | MUX_MODE15)
+			0x19c (PIN_INPUT | MUX_MODE15)
+			0x1a0 (PIN_INPUT | MUX_MODE15)
+			0x1a4 (PIN_INPUT | MUX_MODE15)
+			0x1a8 (PIN_INPUT | MUX_MODE15)
+			0x1ac (PIN_INPUT | MUX_MODE15)
+			0x1b0 (PIN_INPUT | MUX_MODE15)
+			0x1b4 (PIN_INPUT | MUX_MODE15)
+			0x1b8 (PIN_INPUT | MUX_MODE15)
+			0x1bc (PIN_INPUT | MUX_MODE15)
+			0x1c0 (PIN_INPUT | MUX_MODE15)
+			0x1c4 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_INPUT | MUX_MODE15)
+			0x240 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
 			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
@@ -164,6 +266,17 @@ usb1_pins: pinmux_usb1_pins {
 		>;
 	};
 
+	extcon_usb1_pins: extcon_usb1_pins {
+		pinctrl-single,pins = <
+			0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+		>;
+	};
+
+	extcon_usb2_pins: extcon_usb2_pins {
+		pinctrl-single,pins = <
+			0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -314,6 +427,12 @@ tps659038_pwr_button: tps659038_pwr_button {
 			wakeup-source;
 			ti,palmas-long-press-seconds = <12>;
 		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
 	};
 
 	tmp102: tmp102@48 {
@@ -365,6 +484,32 @@ &uart3 {
 	pinctrl-0 = <&uart3_pins_default>;
 };
 
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
 &mmc1 {
 	status = "okay";
 
@@ -403,3 +548,15 @@ &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins>;
 };
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	dr_mode = "peripheral";
+};

arch/arm/boot/dts/armada-370-db.dts

@@ -8,9 +8,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -3,9 +3,43 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-370-netgear-rn104.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-370-rd.dts

@@ -6,9 +6,43 @@
  *
  *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default

arch/arm/boot/dts/armada-370-synology-ds213j.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the old 0xd0000000).

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -8,9 +8,43 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * This file contains the definitions that are common to the Armada
  * 370 and Armada XP SoC.

arch/arm/boot/dts/armada-370.dtsi

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada 370 SoC that are not
  * common to all Armada SoCs.

arch/arm/boot/dts/armada-375-db.dts

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-375.dtsi

@@ -6,9 +6,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
@@ -63,7 +97,7 @@ cpu@1 {
 	};
 
 	soc {
-		compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
+		compatible = "marvell,armada375-mbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		controller = <&mbusc>;

arch/arm/boot/dts/armada-380.dtsi

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "armada-38x.dtsi"
@@ -32,9 +66,8 @@ cpu@0 {
 
 	soc {
 		internal-regs {
-			pinctrl {
+			pinctrl@18000 {
 				compatible = "marvell,mv88f6810-pinctrl";
-				reg = <0x18000 0x20>;
 			};
 		};
 

arch/arm/boot/dts/armada-385-db-ap.dts

+/*
+ * Device Tree file for Marvell Armada 385 Access Point Development board
+ * (DB-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 Access Point Development Board";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi1: spi@10680 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins>;
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <54000000>;
+				};
+			};
+
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+
+				/*
+				 * This bus is wired to two EEPROM
+				 * sockets, one of which holding the
+				 * board ID used by the	bootloader.
+				 * Erasing this EEPROM's content will
+				 * brick the board.
+				 * Use this bus with caution.
+				 */
+			};
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy2: ethernet-phy@6 {
+					reg = <6>;
+				};
+			};
+
+			/* UART0 is exposed through the JP8 connector */
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/*
+			 * UART1 is exposed through a FTDI chip
+			 * wired to the mini-USB connector
+			 */
+			uart1: serial@12100 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+
+			ethernet@70000 {
+				pinctrl-names = "default";
+
+				/*
+				 * The Reference Clock 0 is used to
+				 * provide a clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The three PCIe units are accessible through
+			 * standard mini-PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/armada-385.dtsi

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "armada-38x.dtsi"
@@ -37,9 +71,8 @@ cpu@1 {
 
 	soc {
 		internal-regs {
-			pinctrl {
+			pinctrl@18000 {
 				compatible = "marvell,mv88f6820-pinctrl";
-				reg = <0x18000 0x20>;
 			};
 		};
 

arch/arm/boot/dts/armada-385-db.dts → arch/arm/boot/dts/armada-388-db.dts

 /*
- * Device Tree file for Marvell Armada 385 evaluation board
+ * Device Tree file for Marvell Armada 388 evaluation board
  * (DB-88F6820)
  *
  *  Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-#include "armada-385.dtsi"
+#include "armada-388.dtsi"
 
 / {
 	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
@@ -74,7 +109,7 @@ ethernet@70000 {
 				phy-mode = "rgmii-id";
 			};
 
-			mdio {
+			mdio@72004 {
 				phy0: ethernet-phy@0 {
 					reg = <0>;
 				};

arch/arm/boot/dts/armada-385-rd.dts → arch/arm/boot/dts/armada-388-rd.dts

 /*
- * Device Tree file for Marvell Armada 385 Reference Design board
+ * Device Tree file for Marvell Armada 388 Reference Design board
  * (RD-88F6820-AP)
  *
  *  Copyright (C) 2014 Marvell
@@ -7,17 +7,52 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-#include "armada-385.dtsi"
+#include "armada-388.dtsi"
 
 / {
 	model = "Marvell Armada 385 Reference Design";
-	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
+	compatible = "marvell,a385-rd", "marvell,armada388",
+		"marvell,armada385","marvell,armada380";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
@@ -67,7 +102,7 @@ ethernet@70000 {
 			};
 
 
-			mdio {
+			mdio@72004 {
 				phy0: ethernet-phy@0 {
 					reg = <0>;
 				};

arch/arm/boot/dts/armada-388.dtsi

+/*
+ * Device Tree Include file for Marvell Armada 388 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ * The main difference with the Armada 385 is that the 388 can handle two more
+ * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
+ * property and the name of the SoC, and add the second SATA host which control
+ * the 2 other ports.
+ */
+
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 388 family SoC";
+	compatible = "marvell,armada388", "marvell,armada385",
+		"marvell,armada380";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6828-pinctrl";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+		};
+	};
+};

arch/arm/boot/dts/armada-38x.dtsi

@@ -7,9 +7,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
@@ -31,8 +65,7 @@ aliases {
 	};
 
 	soc {
-		compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
-			     "simple-bus";
+		compatible = "marvell,armada380-mbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		controller = <&mbusc>;
@@ -173,7 +206,7 @@ i2c1: i2c@11100 {
 				status = "disabled";
 			};
 
-			serial@12000 {
+			uart0: serial@12000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
@@ -193,9 +226,94 @@ serial@12100 {
 				status = "disabled";
 			};
 
-			pinctrl {
-				compatible = "marvell,mv88f6820-pinctrl";
+			pinctrl: pinctrl@18000 {
 				reg = <0x18000 0x20>;
+
+				ge0_rgmii_pins: ge-rgmii-pins-0 {
+					marvell,pins = "mpp6", "mpp7", "mpp8",
+						       "mpp9", "mpp10", "mpp11",
+						       "mpp12", "mpp13", "mpp14",
+						       "mpp15", "mpp16", "mpp17";
+					marvell,function = "ge0";
+				};
+
+				ge1_rgmii_pins: ge-rgmii-pins-1 {
+					marvell,pins = "mpp21", "mpp27", "mpp28",
+						       "mpp29", "mpp30", "mpp31",
+						       "mpp32", "mpp37", "mpp38",
+						       "mpp39", "mpp40", "mpp41";
+					marvell,function = "ge1";
+				};
+
+				i2c0_pins: i2c-pins-0 {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				mdio_pins: mdio-pins {
+					marvell,pins = "mpp4", "mpp5";
+					marvell,function = "ge";
+				};
+
+				ref_clk0_pins: ref-clk-pins-0 {
+					marvell,pins = "mpp45";
+					marvell,function = "ref";
+				};
+
+				ref_clk1_pins: ref-clk-pins-1 {
+					marvell,pins = "mpp46";
+					marvell,function = "ref";
+				};
+
+				spi0_pins: spi-pins-0 {
+					marvell,pins = "mpp22", "mpp23", "mpp24",
+						       "mpp25";
+					marvell,function = "spi0";
+				};
+
+				spi1_pins: spi-pins-1 {
+					marvell,pins = "mpp56", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "spi1";
+				};
+
+				uart0_pins: uart-pins-0 {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart-pins-1 {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				sdhci_pins: sdhci-pins {
+					marvell,pins = "mpp48", "mpp49", "mpp50",
+						       "mpp52", "mpp53", "mpp54",
+						       "mpp55", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "sd0";
+				};
+
+				sata0_pins: sata-pins-0 {
+					marvell,pins = "mpp20";
+					marvell,function = "sata0";
+				};
+
+				sata1_pins: sata-pins-1 {
+					marvell,pins = "mpp19";
+					marvell,function = "sata1";
+				};
+
+				sata2_pins: sata-pins-2 {
+					marvell,pins = "mpp47";
+					marvell,function = "sata2";
+				};
+
+				sata3_pins: sata-pins-3 {
+					marvell,pins = "mpp44";
+					marvell,function = "sata3";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -373,7 +491,7 @@ eth0: ethernet@70000 {
 				status = "disabled";
 			};
 
-			mdio {
+			mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";

arch/arm/boot/dts/armada-xp-axpwifiap.dts

@@ -3,16 +3,50 @@
  *
  * Note: this board is shipped with a new generation boot loader that
  * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
- * used.
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
+ * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
  *
  * Copyright (C) 2013 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -60,10 +94,12 @@ pcie@3,0 {
 		};
 
 		internal-regs {
+			/* UART0 */
 			serial@12000 {
 				status = "okay";
 			};
 
+			/* UART1 */
 			serial@12100 {
 				status = "okay";
 			};

arch/arm/boot/dts/armada-xp-db.dts

@@ -8,9 +8,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
   *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default

arch/arm/boot/dts/armada-xp-gp.dts

@@ -8,9 +8,43 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default

arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-xp-matrix.dts

@@ -5,9 +5,43 @@
  *
  * Lior Amsalem <alior@marvell.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -5,9 +5,43 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada XP MV78230 SoC that are not
  * common to all Armada XP SoCs.

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -5,9 +5,43 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada XP MV78260 SoC that are not
  * common to all Armada XP SoCs.

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -5,9 +5,43 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada XP MV78460 SoC that are not
  * common to all Armada XP SoCs.

arch/arm/boot/dts/armada-xp-netgear-rn2120.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -5,9 +5,43 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/armada-xp-synology-ds414.dts

@@ -3,10 +3,43 @@
  *
  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the old 0xd0000000).

arch/arm/boot/dts/armada-xp.dtsi

@@ -8,9 +8,43 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  *
  * Contains definitions specific to the Armada XP SoC that are not
  * common to all Armada SoCs.

arch/arm/boot/dts/at91sam9263.dtsi

@@ -695,6 +695,16 @@ pinctrl_can_rx_tx: can_rx_tx {
 					};
 				};
 
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -823,6 +833,17 @@ ssc1: ssc@fff9c000 {
 				status = "disabled";
 			};
 
+			ac97: sound@fffa0000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&ac97_clk>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -54,7 +54,7 @@ i2c0: i2c@f8010000 {
 				status = "okay";
 
 				wm8904: codec@1a {
-					compatible = "wm8904";
+					compatible = "wlf,wm8904";
 					reg = <0x1a>;
 					clocks = <&pck0>;
 					clock-names = "mclk";

arch/arm/boot/dts/at91sam9x5ek.dtsi

@@ -53,6 +53,8 @@ usart0: serial@f801c000 {
 			};
 
 			usb2: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_board_usb2>;
 				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -80,6 +82,13 @@ pinctrl_board_mmc1: mmc1-board {
 							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
 					};
 				};
+
+				usb2 {
+					pinctrl_board_usb2: usb2-board {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+					};
+				};
 			};
 
 			spi0: spi@f0000000 {

arch/arm/boot/dts/atlas7-evb.dts

+/*
+ * DTS file for CSR SiRFatlas7 Evaluation Board
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "atlas7.dtsi"
+
+/ {
+	model = "CSR SiRFatlas7 Evaluation Board";
+	compatible = "sirf,atlas7-cb", "sirf,atlas7";
+
+	chosen {
+		bootargs = "console=ttySiRF1,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vpp_reserved: vpp_mem@5e800000 {
+			compatible = "sirf,reserved-memory";
+			reg = <0x5e800000 0x800000>;
+		};
+
+		nanddisk_reserved: nanddisk@46000000 {
+			reg = <0x46000000 0x200000>;
+			no-map;
+		};
+	};
+
+
+	noc {
+		mediam {
+			nand@17050000 {
+				memory-region = <&nanddisk_reserved>;
+			};
+		};
+
+		gnssm {
+			spi1: spi@18200000 {
+				status = "okay";
+				spiflash: macronix@0{
+					status = "okay";
+					compatible = "macronix,mx25l6405d";
+					reg = <0>;
+					spi-max-frequency = <37500000>;
+					spi-cpha;
+					spi-cpol;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partitions@0 {
+						label = "myspiboot";
+						reg = <0x0 0x800000>;
+					};
+				};
+			};
+		};
+
+		btm {
+			uart6: uart@11000000 {
+				status = "okay";
+				sirf,uart-has-rtscts;
+			};
+		};
+
+		disp-iobg {
+			vpp@13110000 {
+				memory-region = <&vpp_reserved>;
+			};
+		};
+
+		display0: display@0 {
+			compatible = "lvds-panel";
+			source = "lvds.0";
+
+			bl-gpios = <&gpio_1 63 0>;
+			data-lines  = <24>;
+
+			display-timings {
+				native-mode = <&timing0>;
+				timing0: timing0 {
+					clock-frequency = <60000000>;
+					hactive = <1024>;
+					vactive = <600>;
+					hfront-porch = <220>;
+					hback-porch = <100>;
+					hsync-len = <1>;
+					vback-porch = <10>;
+					vfront-porch = <25>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <1>;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/axp209.dtsi

+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+		};
+	};
+};

arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts

@@ -23,11 +23,77 @@ memory {
 		reg = <0x00000000 0x08000000>;
 	};
 
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		power1 {
+			label = "bcm53xx:white:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router0 {
+			label = "bcm53xx:blue:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		restart {
 			label = "Reset";

arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts

+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xwc-1000", "brcm,bcm4708";
+	model = "Luxul XWC-1000 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	axi@18000000 {
+		nand@28000 {
+			reg = <0x00028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi";
+				reg = <0x00000000 0x08000000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

arch/arm/boot/dts/bcm4708-netgear-r6250.dts

@@ -71,7 +71,6 @@ gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		wps {
 			label = "WPS";

arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts

@@ -61,7 +61,6 @@ gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		wps {
 			label = "WPS";

arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts

@@ -61,7 +61,6 @@ gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		restart {
 			label = "Reset";

arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts

@@ -23,11 +23,77 @@ memory {
 		reg = <0x00000000 0x08000000>;
 	};
 
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <200>;
 
 		aoss {
 			label = "AOSS";

arch/arm/boot/dts/berlin2.dtsi

@@ -104,7 +104,7 @@ gic: interrupt-controller@ad1000 {
 		local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&chip CLKID_TWD>;
 		};
 

arch/arm/boot/dts/berlin2cd.dtsi

@@ -45,6 +45,11 @@ soc {
 
 		ranges = <0 0xf7000000 0x1000000>;
 
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
@@ -71,7 +76,7 @@ gic: interrupt-controller@ad1000 {
 		local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&chip CLKID_TWD>;
 		};