regulator: bd718XX use pickable ranges

Few regulators in BD71837 and BD71847 can output voltages from
different voltage ranges. Register interface is arranged so that
used range is selected by toggling bits which are not next to actual
voltage selection bits. Then the voltage inside selected range is
determined by voltage selection bits (as usual). Support BD71837
and BD71847 selectible range voltages using new pickable ranges
helpers.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

include/linux/mfd/rohm-bd718x7.h

@@ -31,31 +31,27 @@ enum {
 	BD718XX_REGULATOR_AMOUNT,
 };
 
-/* Common voltage configurations
- *
- * Note, we support only one range of voltages for each buck/LDO until we
- * get pickable ranges support. (See range selection bits for BUCK5 and
- * LDO1. On BD71847 also the second no DVS buck and LDO5)
- */
-
+/* Common voltage configurations */
 #define BD718XX_DVS_BUCK_VOLTAGE_NUM		0x3D
-#define BD718XX_1ST_NODVS_BUCK_VOLTAGE_NUM	0x08
 #define BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM	0x3D
 
-#define BD718XX_LDO1_VOLTAGE_NUM	0x04
+#define BD718XX_LDO1_VOLTAGE_NUM	0x08
 #define BD718XX_LDO2_VOLTAGE_NUM	0x02
 #define BD718XX_LDO3_VOLTAGE_NUM	0x10
 #define BD718XX_LDO4_VOLTAGE_NUM	0x0A
-#define BD718XX_LDO5_VOLTAGE_NUM	0x10
 #define BD718XX_LDO6_VOLTAGE_NUM	0x0A
 
 /* BD71837 specific voltage configurations */
+#define BD71837_BUCK5_VOLTAGE_NUM	0x10
 #define BD71837_BUCK6_VOLTAGE_NUM	0x04
 #define BD71837_BUCK7_VOLTAGE_NUM	0x08
+#define BD71837_LDO5_VOLTAGE_NUM	0x10
 #define BD71837_LDO7_VOLTAGE_NUM	0x10
 
 /* BD71847 specific voltage configurations */
-#define BD71847_BUCK4_VOLTAGE_NUM	0x04
+#define BD71847_BUCK3_VOLTAGE_NUM	0x18
+#define BD71847_BUCK4_VOLTAGE_NUM	0x08
+#define BD71847_LDO5_VOLTAGE_NUM	0x20
 
 /* Registers specific to BD71837 */
 enum {
@@ -139,12 +135,20 @@ enum {
 #define DVS_BUCK_IDLE_MASK	0x3F
 
 #define BD718XX_1ST_NODVS_BUCK_MASK	0x07
-#define BD71847_BUCK4_MASK		0x03
-#define BD71837_BUCK6_MASK		0x03
 #define BD718XX_3RD_NODVS_BUCK_MASK	0x07
 #define BD718XX_4TH_NODVS_BUCK_MASK	0x3F
 
+#define BD71847_BUCK3_MASK		0x07
+#define BD71847_BUCK3_RANGE_MASK	0xC0
+#define BD71847_BUCK4_MASK		0x03
+#define BD71847_BUCK4_RANGE_MASK	0x40
+
+#define BD71837_BUCK5_MASK		0x07
+#define BD71837_BUCK5_RANGE_MASK	0x80
+#define BD71837_BUCK6_MASK		0x03
+
 #define BD718XX_LDO1_MASK		0x03
+#define BD718XX_LDO1_RANGE_MASK		0x20
 #define BD718XX_LDO2_MASK		0x20
 #define BD718XX_LDO3_MASK		0x0F
 #define BD718XX_LDO4_MASK		0x0F
@@ -152,10 +156,10 @@ enum {
 
 #define BD71837_LDO5_MASK		0x0F
 #define BD71847_LDO5_MASK		0x0F
+#define BD71847_LDO5_RANGE_MASK		0x20
 
 #define BD71837_LDO7_MASK		0x0F
 
-
 /* BD718XX Voltage monitoring masks */
 #define BD718XX_BUCK1_VRMON80           0x1
 #define BD718XX_BUCK1_VRMON130          0x2