Skip to content

L
linux
Commit a4e2c5d1 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge http://linux-input.bkbits.net/linux-input 

into home.transmeta.com:/home/torvalds/v2.5/linux
parents 37c55498 831577c2
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 3530 additions and 3472 deletions
CREDITS
View file @ a4e2c5d1
......@@ -2582,11 +2582,11 @@ S: The Australian National University, ACT 0200
S: Australia
N: Aristeu Sergio Rozanski Filho
E: aris@conectiva.com.br
E: aris@cathedrallabs.org
D: Support for EtherExpress 10 ISA (i82595) in eepro driver
S: Conectiva S.A.
S: R. Tocantins, 89 - Cristo Rei
S: 80050-430 - Curitiba - Paran
D: User level driver support for input
S: R. Jose Serrato, 130 - Santa Candida
S: 82640-320 - Curitiba - Paran
S: Brazil
N: Alessandro Rubini
......
Documentation/devices.txt
View file @ a4e2c5d1
......@@ -419,6 +419,7 @@ Your cooperation is appreciated.
220 = /dev/mptctl Message passing technology (MPT) control
221 = /dev/mvista/hssdsi Montavista PICMG hot swap system driver
222 = /dev/mvista/hasi Montavista PICMG high availability
223 = /dev/input/uinput User level driver support for input
240-255 Reserved for local use
11 char Raw keyboard device
......
Documentation/input/amijoy.txt 0 → 100644
View file @ a4e2c5d1
Amiga 4-joystick parport extension
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Parallel port pins:
(2) - Up1 (6) - Up2
(3) - Down1 (7) - Down2
(4) - Left1 (8) - Left2
(5) - Right1 (9) - Right2
(13) - Fire1 (11) - Fire2
(18) - Gnd1 (18) - Gnd2
Amiga digital joystick pinout
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) - Up
(2) - Down
(3) - Left
(4) - Right
(5) - n/c
(6) - Fire button
(7) - +5V (50mA)
(8) - Gnd
(9) - Thumb button
Amiga mouse pinout
~~~~~~~~~~~~~~~~~~
(1) - V-pulse
(2) - H-pulse
(3) - VQ-pulse
(4) - HQ-pulse
(5) - Middle button
(6) - Left button
(7) - +5V (50mA)
(8) - Gnd
(9) - Right button
Amiga analog joystick pinout
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) - Top button
(2) - Top2 button
(3) - Trigger button
(4) - Thumb button
(5) - Analog X
(6) - n/c
(7) - +5V (50mA)
(8) - Gnd
(9) - Analog Y
Amiga lightpen pinout
~~~~~~~~~~~~~~~~~~~~~
(1) - n/c
(2) - n/c
(3) - n/c
(4) - n/c
(5) - Touch button
(6) - /Beamtrigger
(7) - +5V (50mA)
(8) - Gnd
(9) - Stylus button
-------------------------------------------------------------------------------
NAME rev ADDR type chip Description
JOY0DAT 00A R Denise Joystick-mouse 0 data (left vert, horiz)
JOY1DAT 00C R Denise Joystick-mouse 1 data (right vert,horiz)
These addresses each read a 16 bit register. These in turn
are loaded from the MDAT serial stream and are clocked in on
the rising edge of SCLK. MLD output is used to parallel load
the external parallel-to-serial converter.This in turn is
loaded with the 4 quadrature inputs from each of two game
controller ports (8 total) plus 8 miscellaneous control bits
which are new for LISA and can be read in upper 8 bits of
LISAID.
Register bits are as follows:
Mouse counter usage (pins 1,3 =Yclock, pins 2,4 =Xclock)
BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
JOY0DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
0=LEFT CONTROLLER PAIR, 1=RIGHT CONTROLLER PAIR.
(4 counters total).The bit usage for both left and right
addresses is shown below. Each 6 bit counter (Y7-Y2,X7-X2) is
clocked by 2 of the signals input from the mouse serial
stream. Starting with first bit recived:
+-------------------+-----------------------------------------+
| Serial | Bit Name | Description |
+--------+----------+-----------------------------------------+
| 0 | M0H | JOY0DAT Horizontal Clock |
| 1 | M0HQ | JOY0DAT Horizontal Clock (quadrature) |
| 2 | M0V | JOY0DAT Vertical Clock |
| 3 | M0VQ | JOY0DAT Vertical Clock (quadrature) |
| 4 | M1V | JOY1DAT Horizontall Clock |
| 5 | M1VQ | JOY1DAT Horizontall Clock (quadrature) |
| 6 | M1V | JOY1DAT Vertical Clock |
| 7 | M1VQ | JOY1DAT Vertical Clock (quadrature) |
+--------+----------+-----------------------------------------+
Bits 1 and 0 of each counter (Y1-Y0,X1-X0) may be
read to determine the state of the related input signal pair.
This allows these pins to double as joystick switch inputs.
Joystick switch closures can be deciphered as follows:
+------------+------+---------------------------------+
| Directions | Pin# | Counter bits |
+------------+------+---------------------------------+
| Forward | 1 | Y1 xor Y0 (BIT#09 xor BIT#08) |
| Left | 3 | Y1 |
| Back | 2 | X1 xor X0 (BIT#01 xor BIT#00) |
| Right | 4 | X1 |
+------------+------+---------------------------------+
-------------------------------------------------------------------------------
NAME rev ADDR type chip Description
JOYTEST 036 W Denise Write to all 4 joystick-mouse counters at once.
Mouse counter write test data:
BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx
JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx
-------------------------------------------------------------------------------
NAME rev ADDR type chip Description
POT0DAT h 012 R Paula Pot counter data left pair (vert, horiz)
POT1DAT h 014 R Paula Pot counter data right pair (vert,horiz)
These addresses each read a pair of 8 bit pot counters.
(4 counters total). The bit assignment for both
addresses is shown below. The counters are stopped by signals
from 2 controller connectors (left-right) with 2 pins each.
BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
RIGHT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
LEFT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0
+--------------------------+-------+
| CONNECTORS | PAULA |
+-------+------+-----+-----+-------+
| Loc. | Dir. | Sym | pin | pin |
+-------+------+-----+-----+-------+
| RIGHT | Y | RX | 9 | 33 |
| RIGHT | X | RX | 5 | 32 |
| LEFT | Y | LY | 9 | 36 |
| LEFT | X | LX | 5 | 35 |
+-------+------+-----+-----+-------+
With normal (NTSC or PAL) horiz. line rate, the pots will
give a full scale (FF) reading with about 500kohms in one
frame time. With proportionally faster horiz line times,
the counters will count proportionally faster.
This should be noted when doing variable beam displays.
-------------------------------------------------------------------------------
NAME rev ADDR type chip Description
POTGO 034 W Paula Pot port (4 bit) bi-direction and data, and pot counter start.
-------------------------------------------------------------------------------
NAME rev ADDR type chip Description
POTINP 016 R Paula Pot pin data read
This register controls a 4 bit bi-direction I/O port
that shares the same 4 pins as the 4 pot counters above.
+-------+----------+---------------------------------------------+
| BIT# | FUNCTION | DESCRIPTION |
+-------+----------+---------------------------------------------+
| 15 | OUTRY | Output enable for Paula pin 33 |
| 14 | DATRY | I/O data Paula pin 33 |
| 13 | OUTRX | Output enable for Paula pin 32 |
| 12 | DATRX | I/O data Paula pin 32 |
| 11 | OUTLY | Out put enable for Paula pin 36 |
| 10 | DATLY | I/O data Paula pin 36 |
| 09 | OUTLX | Output enable for Paula pin 35 |
| 08 | DATLX | I/O data Paula pin 35 |
| 07-01 | X | Not used |
| 00 | START | Start pots (dump capacitors,start counters) |
+-------+----------+---------------------------------------------+
-------------------------------------------------------------------------------
Documentation/input/atarikbd.txt 0 → 100644
View file @ a4e2c5d1
This diff is collapsed.
Documentation/input/cd32.txt 0 → 100644
View file @ a4e2c5d1
I have written a small patch that let's me use my Amiga CD32
joypad connected to the parallel port. Thought I'd share it with you so
you can add it to the list of supported joysticks (hopefully someone will
find it useful).
It needs the following wiring:
CD32 pad | Parallel port
----------------------------
1 (Up) | 2 (D0)
2 (Down) | 3 (D1)
3 (Left) | 4 (D2)
4 (Right) | 5 (D3)
5 (Fire3) | 14 (AUTOFD)
6 (Fire1) | 17 (SELIN)
7 (+5V) | 1 (STROBE)
8 (Gnd) | 18 (Gnd)
9 (Fire2) | 7 (D5)
Documentation/input/ff.txt
View file @ a4e2c5d1
Force feedback for Linux.
By Johann Deneux <deneux@ifrance.com> on 2001/04/22.
You can redistribute this file, provided you include shape.fig and
interactive.fig.
----------------------------------------------------------------------------
0. Introduction
......@@ -38,13 +39,10 @@ You also need inputattach.
You then need to insert the modules into the following order:
% modprobe joydev
% modprobe serport
% modprobe serport # Only for serial
% modprobe iforce
% modprobe evdev
% ./inputattach -ifor $2 & # Only for serial
For convenience, you may use the shell script named "ff" available from
the cvs tree of the Linux Console Project at sourceforge. You can also
retrieve it from http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/.
If you are using USB, you don't need the inputattach step.
Please check that you have all the /dev/input entries needed:
......@@ -68,7 +66,7 @@ mknod input/event3 c 13 67
2.1 Does it work ?
~~~~~~~~~~~~~~~~~~
There is an utility called fftest that will allow you to test the driver.
% fftest /dev/eventXX
% fftest /dev/input/eventXX
3. Instructions to the developper
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
......@@ -81,22 +79,28 @@ and write() on /dev/input/eventXX.
#include <linux/input.h>
#include <sys/ioctl.h>
unsigned long features[1 + FF_MAX/sizeof(unsigned long)];
int ioctl(int file_descriptor, int request, unsigned long *features);
"request" must be EVIOCGBIT(EV_FF, sizeof(unsigned long))
"request" must be EVIOCGBIT(EV_FF, size of features array in bytes )
Returns the features supported by the device. features is a bitfield with the
following bits:
- FF_X has an X axis (should allways be the case)
- FF_Y has an Y axis (usually not the case for wheels)
- FF_X has an X axis (usually joysticks)
- FF_Y has an Y axis (usually joysticks)
- FF_WHEEL has a wheel (usually sterring wheels)
- FF_CONSTANT can render constant force effects
- FF_PERIODIC can render periodic effects (sine, ramp, square...)
- FF_SPRING can simulate the presence of a spring
- FF_FRICTION can simulate friction (aka drag, damper effect...)
- FF_FRICTION can simulate friction
- FF_DAMPER can simulate damper effects
- FF_RUMBLE rumble effects (normally the only effect supported by rumble
pads)
- 8 bits from FF_N_EFFECTS_0 containing the number of effects that can be
simultaneously played.
int ioctl(int fd, EVIOCGEFFECTS, int *n);
Returns the number of effects the device can keep in its memory.
3.2 Uploading effects to the device
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
......@@ -112,7 +116,11 @@ uploaded, but not played.
The content of effect may be modified. In particular, its field "id" is set
to the unique id assigned by the driver. This data is required for performing
some operations (removing an effect, controlling the playback).
See <linux/input.h> for a description of the ff_effect stuct.
This if field must be set to -1 by the user in order to tell the driver to
allocate a new effect.
See <linux/input.h> for a description of the ff_effect stuct. You should also
find help in a few sketches, contained in files shape.fig and interactive.fig.
You need xfig to visualize these files.
3.3 Removing an effect from the device
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
......@@ -187,8 +195,31 @@ A value of 0 means "no auto-center".
3.7 Dynamic update of an effect
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This consists in changing some parameters of an effect while it's playing. The
driver currently does not support that. You still have the brute-force method,
which consists in erasing the effect and uploading the updated version. It
actually works pretty well. You don't need to stop-and-start the effect.
Proceed as if you wanted to upload a new effect, except that instead of
setting the id field to -1, you set it to the wanted effect id.
Normally, the effect is not stopped and restarted. However, depending on the
type of device, not all paramaters can be dynamically updated. For example,
the direction of an effect cannot be updated with iforce devices. In this
case, the driver stops the effect, up-load it, and restart it.
3.8 Information about the status of effects
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Every time the status of an effect is changed, an event is sent. The values
and meanings of the fields of the event are as follows:
struct input_event {
/* When the status of the effect changed */
struct timeval time;
/* Set to EV_FF_STATUS */
unsigned short type;
/* Contains the id of the effect */
unsigned short code;
/* Indicates the status */
unsigned int value;
};
FF_STATUS_STOPPED The effect stopped playing
FF_STATUS_PLAYING The effect started to play
Documentation/input/iforce-protocol.txt 0 → 100644
View file @ a4e2c5d1
** Introduction
This document describes what I managed to discover about the protocol used to
specify force effects to I-Force 2.0 devices. None of this information comes
from Immerse. That's why you should not trust what is written in this
document. This document is intended to help understanding the protocol.
This is not a reference. Comments and corrections are welcome. To contact me,
send an email to: deneux@ifrance.com
** WARNING **
I may not be held responsible for any dammage or harm caused if you try to
send data to your I-Force device based on what you read in this document.
** Preliminary Notes:
All values are hexadecimal with big-endian encoding (msb on the left). Beware,
values inside packets are encoded using little-endian. Bytes whose roles are
unknown are marked ??? Information that needs deeper inspection is marked (?)
** General form of a packet **
This is how packets look when the device uses the rs232 to communicate.
2B OP LEN DATA CS
CS is the checksum. It is equal to the exclusive or of all bytes.
When using USB:
OP DATA
The 2B, LEN and CS fields have disappeared, probably because USB handles frames and
data corruption is handled or unsignificant.
First, I describe effects that are sent by the device to the computer
** Device input state
This packet is used to indicate the state of each button and the value of each
axis
OP= 01 for a joystick, 03 for a wheel
LEN= Varies from device to device
00 X-Axis lsb
01 X-Axis msb
02 Y-Axis lsb, or gas pedal for a wheel
03 Y-Axis msb, or brake pedal for a wheel
04 Throttle
05 Buttons
06 Lower 4 bits: Buttons
Upper 4 bits: Hat
07 Rudder
** Device effects states
OP= 02
LEN= Varies
00 ? Bit 1 (Value 2) is the value of the deadman switch
01 Bit 8 is set if the effect is playing. Bits 0 to 7 are the effect id.
02 ??
03 Address of parameter block changed (lsb)
04 Address of parameter block changed (msb)
05 Address of second parameter block changed (lsb)
... depending on the number of parameter blocks updated
** Force effect **
OP= 01
LEN= 0e
00 Channel (when playing several effects at the same time, each must be assigned a channel)
01 Wave form
Val 00 Constant
Val 20 Square
Val 21 Triangle
Val 22 Sine
Val 23 Sawtooth up
Val 24 Sawtooth down
Val 40 Spring (Force = f(pos))
Val 41 Friction (Force = f(velocity)) and Inertia (Force = f(acceleration))
02 Axes affected and trigger
Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction
Val 4 = X axis only. Byte 05 must contain 5a
Val 8 = Y axis only. Byte 05 must contain b4
Val c = X and Y axes. Bytes 05 must contain 60
Bits 0-3: Val 0 = No trigger
Val x+1 = Button x triggers the effect
When the whole byte is 0, cancel the previously set trigger
03-04 Duration of effect (little endian encoding, in ms)
05 Direction of effect, if applicable. Else, see 02 for value to assign.
06-07 Minimum time between triggering.
08-09 Address of periodicity or magnitude parameters
0a-0b Address of attack and fade parameters, or ffff if none.
*or*
08-09 Address of interactive parameters for X-axis, or ffff if not applicable
0a-0b Address of interactive parameters for Y-axis, or ffff if not applicable
0c-0d Delay before execution of effect (little endian encoding, in ms)
** Time based parameters **
*** Attack and fade ***
OP= 02
LEN= 08
00-01 Address where to store the parameteres
02-03 Duration of attack (little endian encoding, in ms)
04 Level at end of attack. Signed byte.
05-06 Duration of fade.
07 Level at end of fade.
*** Magnitude ***
OP= 03
LEN= 03
00-01 Address
02 Level. Signed byte.
*** Periodicity ***
OP= 04
LEN= 07
00-01 Address
02 Magnitude. Signed byte.
03 Offset. Signed byte.
04 Phase. Val 00 = 0 deg, Val 40 = 90 degs.
05-06 Period (little endian encoding, in ms)
** Interactive parameters **
OP= 05
LEN= 0a
00-01 Address
02 Positive Coeff
03 Negative Coeff
04+05 Offset (center)
06+07 Dead band (Val 01F4 = 5000 (decimal))
08 Positive saturation (Val 0a = 1000 (decimal) Val 64 = 10000 (decimal))
09 Negative saturation
The encoding is a bit funny here: For coeffs, these are signed values. The
maximum value is 64 (100 decimal), the min is 9c.
For the offset, the minimum value is FE0C, the maximum value is 01F4.
For the deadband, the minimum value is 0, the max is 03E8.
** Controls **
OP= 41
LEN= 03
00 Channel
01 Start/Stop
Val 00: Stop
Val 01: Start and play once.
Val 41: Start and play n times (See byte 02 below)
02 Number of iterations n.
** Init **
*** Querying features ***
OP= ff
Query command. Length varies according to the query type.
The general format of this packet is:
ff 01 QUERY [INDEX] CHECKSUM
reponses are of the same form:
FF LEN QUERY VALUE_QUERIED CHECKSUM2
where LEN = 1 + length(VALUE_QUERIED)
**** Query ram size ****
QUERY = 42 ('B'uffer size)
The device should reply with the same packet plus two additionnal bytes
containing the size of the memory:
ff 03 42 03 e8 CS would mean that the device has 1000 bytes of ram available.
**** Query number of effects ****
QUERY = 4e ('N'umber of effects)
The device should respond by sending the number of effects that can be played
at the same time (one byte)
ff 02 4e 14 CS would stand for 20 effects.
**** Vendor's id ****
QUERY = 4d ('M'anufacturer)
Query the vendors'id (2 bytes)
**** Product id *****
QUERY = 50 ('P'roduct)
Query the product id (2 bytes)
**** Open device ****
QUERY = 4f ('O'pen)
No data returned.
**** Close device *****
QUERY = 43 ('C')lose
No data returned.
**** Query effect ****
QUERY = 45 ('E')
Send effect type.
Returns nonzero if supported (2 bytes)
**** Firmware Version ****
QUERY = 56 ('V'ersion)
Sends back 3 bytes - major, minor, subminor
*** Initialisation of the device ***
**** Set Control ****
!!! Device dependent, can be different on different models !!!
OP= 40 <idx> <val> [<val>]
LEN= 2 or 3
00 Idx
Idx 00 Set dead zone (0..2048)
Idx 01 Ignore Deadman sensor (0..1)
Idx 02 Enable comm watchdog (0..1)
Idx 03 Set the strength of the spring (0..100)
Idx 04 Enable or disable the spring (0/1)
Idx 05 Set axis saturation threshold (0..2048)
**** Set Effect State ****
OP= 42 <val>
LEN= 1
00 State
Bit 3 Pause force feedback
Bit 2 Enable force feedback
Bit 0 Stop all effects
**** Set overall gain ****
OP= 43 <val>
LEN= 1
00 Gain
Val 00 = 0%
Val 40 = 50%
Val 80 = 100%
** Parameter memory **
Each device has a certain amount of memory to store parameters of effects.
The amount of RAM may vary, I encountered values from 200 to 1000 bytes. Below
is the amount of memory apparently needed for every set of parameters:
- period : 0c
- magnitude : 02
- attack and fade : 0e
- interactive : 08
** Appendix: How to study the protocol ? **
1. Generate effects using the force editor provided with the DirectX SDK, or use Immersion Studio (freely available at their web site in the developer section: www.immersion.com)
2. Start a soft spying RS232 or USB (depending on where you connected your joystick/wheel). I used ComPortSpy from fCoder (alpha version!)
3. Play the effect, and watch what happens on the spy screen.
A few words about ComPortSpy:
At first glance, this soft seems, hum, well... buggy. In fact, data appear with a few seconds latency. Personnaly, I restart it every time I play an effect.
Remember it's free (as in free beer) and alpha!
** URLS **
Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy.
** Author of this document **
Johann Deneux <deneux@ifrance.com>
Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/
Additions by Vojtech Pavlik.
I-Force is trademark of Immersion Corp.
Documentation/input/input.txt
View file @ a4e2c5d1
This diff is collapsed.
Documentation/input/interactive.fig 0 → 100644
View file @ a4e2c5d1
#FIG 3.2
Landscape
Center
Inches
Letter
100.00
Single
-2
1200 2
2 1 0 2 0 7 50 0 -1 6.000 0 0 -1 0 0 6
1200 3600 1800 3600 2400 4800 3000 4800 4200 5700 4800 5700
2 2 0 1 0 7 50 0 -1 4.000 0 0 -1 0 0 5
1200 3150 4800 3150 4800 6300 1200 6300 1200 3150
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
1200 4800 4800 4800
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 4
2400 4800 2400 6525 1950 7125 1950 7800
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 4
3000 4800 3000 6525 3600 7125 3600 7800
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 1 3
0 0 1.00 60.00 120.00
3825 5400 4125 5100 5400 5100
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 1 3
0 0 1.00 60.00 120.00
2100 4200 2400 3900 5400 3900
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
4800 5700 5400 5700
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
1800 3600 5400 3600
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 1 3
0 0 1.00 60.00 120.00
2700 4800 2700 4425 5400 4425
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
0 0 1.00 60.00 120.00
0 0 1.00 60.00 120.00
1950 7800 3600 7800
4 1 0 50 0 0 12 0.0000 4 135 810 2775 7725 Dead band\001
4 0 0 50 0 0 12 0.0000 4 180 1155 5400 5700 right saturation\001
4 0 0 50 0 0 12 0.0000 4 135 1065 5400 3600 left saturation\001
4 0 0 50 0 0 12 0.0000 4 180 2505 5400 3900 left coeff ( positive in that case )\001
4 0 0 50 0 0 12 0.0000 4 180 2640 5475 5100 right coeff ( negative in that case )\001
4 0 0 50 0 0 12 0.0000 4 105 480 5400 4425 center\001
Documentation/input/joystick-parport.txt
View file @ a4e2c5d1
Linux Joystick parport drivers v2.0
(c) 1998-2000 Vojtech Pavlik <vojtech@suse.cz>
(c) 1998-2000 Vojtech Pavlik <vojtech@ucw.cz>
(c) 1998 Andree Borrmann <a.borrmann@tu-bs.de>
Sponsored by SuSE
$Id: joystick-parport.txt,v 1.5 2001/05/15 06:41:00 vojtech Exp $
$Id: joystick-parport.txt,v 1.6 2001/09/25 09:31:32 vojtech Exp $
----------------------------------------------------------------------------
0. Disclaimer
......
Documentation/input/joystick.txt
View file @ a4e2c5d1
Linux Joystick driver v2.0.0
(c) 1996-2000 Vojtech Pavlik <vojtech@suse.cz>
(c) 1996-2000 Vojtech Pavlik <vojtech@ucw.cz>
Sponsored by SuSE
$Id: joystick.txt,v 1.6 2001/06/05 09:57:01 vojtech Exp $
$Id: joystick.txt,v 1.12 2002/03/03 12:13:07 jdeneux Exp $
----------------------------------------------------------------------------
0. Disclaimer
......@@ -21,8 +21,8 @@ with this program; if not, write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307 USA
Should you need to contact me, the author, you can do so either by e-mail
- mail your message to <vojtech@suse.cz>, or by paper mail: Vojtech Pavlik,
Ucitelska 1576, Prague 8, 182 00 Czech Republic
- mail your message to <vojtech@ucw.cz>, or by paper mail: Vojtech Pavlik,
Simunkova 1594, Prague 8, 182 00 Czech Republic
For your convenience, the GNU General Public License version 2 is included
in the package: See the file COPYING.
......@@ -111,7 +111,7 @@ your needs:
alias tty-ldisc-2 serport
alias char-major-13 input
above input joydev ns558 analog
options analog js=gameport
options analog js=gamepad
2.5 Verifying that it works
~~~~~~~~~~~~~~~~~~~~~~~~~~~
......@@ -503,15 +503,16 @@ and the /dev/input/jsX device should become usable.
3.21 I-Force devices
~~~~~~~~~~~~~~~~~~~~
All I-Force devices are supported by the iforce.c module. This includes:
All I-Force devices are supported by the iforce.o module. This includes:
* AVB Mag Turbo Force
* AVB Top Shot Pegasus
* AVB Top Shot Force Feedback Racing Wheel
* Logitech WingMan Force
* Logitech WingMan Force 3D
* Logitech WingMan Force Wheel
* Logitech WingMan Strike Force 3D
* Guillemot Race Leader Force Feedback
* Guillemot Force Feedback Racing Wheel
* Thrustmaster Motor Sport GT
To use it, you need to attach the serial port to the driver using the
......@@ -525,6 +526,10 @@ isn't needed.
The I-Force driver now supports force feedback via the event interface.
Please note that Logitech WingMan *3D devices are _not_ supported by this
module, rather by hid. Force feedback is not supported for those devices.
Logitech gamepads are also hid devices.
3.22 Gravis Stinger gamepad
~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Gravis Stinger serial port gamepad, designed for use with laptop
......
Documentation/input/shape.fig 0 → 100644
View file @ a4e2c5d1
#FIG 3.2
Landscape
Center
Inches
Letter
100.00
Single
-2
1200 2
2 1 0 2 0 7 50 0 -1 0.000 0 0 -1 0 0 6
4200 3600 4200 3075 4950 2325 7425 2325 8250 3150 8250 3600
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
4200 3675 4200 5400
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
8250 3675 8250 5400
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
3675 3600 8700 3600
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
8775 3600 10200 3600
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
8325 3150 9075 3150
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
7500 2325 10200 2325
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
3600 3600 3000 3600
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
4125 3075 3000 3075
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
0 0 1.00 60.00 120.00
0 0 1.00 60.00 120.00
4200 5400 8175 5400
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
0 0 1.00 60.00 120.00
0 0 1.00 60.00 120.00
10125 2325 10125 3600
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
0 0 1.00 60.00 120.00
0 0 1.00 60.00 120.00
3000 3150 3000 3600
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
0 0 1.00 60.00 120.00
0 0 1.00 60.00 120.00
9075 3150 9075 3600
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
4950 2325 4950 1200
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2
7425 2325 7425 1200
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 4
4200 3075 4200 2400 3600 1800 3600 1200
2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 4
8250 3150 8250 2475 8775 1950 8775 1200
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
0 0 1.00 60.00 120.00
0 0 1.00 60.00 120.00
3600 1275 4950 1275
2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2
0 0 1.00 60.00 120.00
0 0 1.00 60.00 120.00
7425 1275 8700 1275
4 1 0 50 0 0 12 0.0000 4 135 1140 6075 5325 Effect duration\001
4 0 0 50 0 0 12 0.0000 4 180 1305 10200 3000 Effect magnitude\001
4 0 0 50 0 0 12 0.0000 4 135 780 9150 3450 Fade level\001
4 1 0 50 0 0 12 0.0000 4 180 1035 4275 1200 Attack length\001
4 1 0 50 0 0 12 0.0000 4 180 885 8175 1200 Fade length\001
4 2 0 50 0 0 12 0.0000 4 135 930 2925 3375 Attack level\001
arch/ppc/4xx_io/stb_kb.c
View file @ a4e2c5d1
......@@ -283,11 +283,7 @@ void redwood_irkb_init(void)
{
extern struct machdep_calls ppc_md;
ppc_md.kbd_setkeycode = rawirkbd_setkeycode;
ppc_md.kbd_getkeycode = rawirkbd_getkeycode;
ppc_md.kbd_translate = rawirkbd_translate;
ppc_md.kbd_unexpected_up = rawirkbd_unexpected_up;
ppc_md.kbd_leds = NULL; /*rawirkbd_leds;*/
ppc_md.kbd_init_hw = rawirkbd_init_hw;
}
arch/ppc/Config.help
View file @ a4e2c5d1
......@@ -321,19 +321,6 @@ CONFIG_CD_NO_IDESCSI
answer will get "defaulted" for you if you enable any of the Linux
CD-ROM drivers).
CONFIG_INPUT_ADBHID
Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
such as keyboards, mice, joysticks, or graphic tablets handled by
the input layer. If you say Y here, make sure to say Y to the
corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
"Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
support" (CONFIG_INPUT_EVDEV) as well.
If you say N here, you still have the option of using the old ADB
keyboard and mouse drivers.
If unsure, say Y.
CONFIG_PREP_RESIDUAL
Some PReP systems have residual data passed to the kernel by the
firmware. This allows detection of memory size, devices present and
......@@ -382,14 +369,26 @@ CONFIG_ADB_MACIO
also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
OpenPIC controller and two RS422/Geoports.)
CONFIG_ADB_KEYBOARD
This option allows you to use an ADB keyboard attached to your
machine. Note that this disables any other (ie. PS/2) keyboard
support, even if your machine is physically capable of using both at
the same time.
CONFIG_INPUT_ADBHID
Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
such as keyboards, mice, joysticks, trackpads or graphic tablets
handled by the input layer. If you say Y here, make sure to say Y to
the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
"Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
support" (CONFIG_INPUT_EVDEV) as well.
If unsure, say Y.
CONFIG_MAC_EMUMOUSEBTN
This provides generic support for emulating the 2nd and 3rd mouse
button with keypresses. If you say Y here, the emulation is still
disabled by default. The emulation is controlled by these sysctl
entries:
/proc/sys/dev/mac_hid/mouse_button_emulation
/proc/sys/dev/mac_hid/mouse_button2_keycode
/proc/sys/dev/mac_hid/mouse_button3_keycode
If you use an ADB keyboard (4 pin connector), say Y here.
If you use a PS/2 keyboard (6 pin connector), say N here.
If you have an Apple machine with a 1-button mouse, say Y here.
CONFIG_SERIAL_CONSOLE
If you say Y here, it will be possible to use a serial port as the
......@@ -886,28 +885,6 @@ CONFIG_EST8260
End of life: -
URL: <http://www.microsys.de/html/cu824.html>
CONFIG_MAC_ADBKEYCODES
This provides support for sending ADB keycodes to console devices in
raw mode, rather than generic "Linux" keycodes. This is the default
up to 2.4.0, but in future this may be phased out in favor of
generic Linux keycodes. If you say Y here, you can dynamically
switch via the /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
sysctl and with the "keyboard_sends_linux_keycodes=" kernel
argument.
If unsure, say Y here.
CONFIG_MAC_EMUMOUSEBTN
This provides generic support for emulating the 2nd and 3rd mouse
button with keypresses. If you say Y here, the emulation is still
disabled by default. The emulation is controlled by these sysctl
entries:
/proc/sys/dev/mac_hid/mouse_button_emulation
/proc/sys/dev/mac_hid/mouse_button2_keycode
/proc/sys/dev/mac_hid/mouse_button3_keycode
If you have an Apple machine with a 1-button mouse, say Y here.
CONFIG_PPC_RTC
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
......
arch/ppc/config.in
View file @ a4e2c5d1
......@@ -536,12 +536,9 @@ if [ "$CONFIG_ALL_PPC" = "y" ]; then
bool 'Apple Desktop Bus (ADB) support' CONFIG_ADB
if [ "$CONFIG_ADB" = "y" ]; then
bool ' Include MacIO (CHRP) ADB driver' CONFIG_ADB_MACIO
dep_bool ' Use input layer for ADB devices' CONFIG_INPUT_ADBHID $CONFIG_INPUT
dep_bool ' Support for ADB input devices (keyboard, mice, ...)' CONFIG_INPUT_ADBHID $CONFIG_INPUT
if [ "$CONFIG_INPUT_ADBHID" = "y" ]; then
bool ' Support for ADB raw keycodes' CONFIG_MAC_ADBKEYCODES
bool ' Support for mouse button 2+3 emulation' CONFIG_MAC_EMUMOUSEBTN
else
bool ' Support for ADB keyboard (old driver)' CONFIG_ADB_KEYBOARD
fi
fi
# This is for drivers/macintosh/mac_hid.o, which is needed if the input
......
arch/ppc/kernel/m8260_setup.c
View file @ a4e2c5d1
......@@ -266,14 +266,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.find_end_of_memory = m8260_find_end_of_memory;
ppc_md.setup_io_mappings = m8260_map_io;
ppc_md.kbd_setkeycode = NULL;
ppc_md.kbd_getkeycode = NULL;
ppc_md.kbd_translate = NULL;
ppc_md.kbd_unexpected_up = NULL;
ppc_md.kbd_leds = NULL;
ppc_md.kbd_init_hw = NULL;
ppc_md.ppc_kbd_sysrq_xlate = NULL;
}
/* Mainly for ksyms.
......
arch/ppc/kernel/m8xx_setup.c
View file @ a4e2c5d1
......@@ -396,14 +396,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.find_end_of_memory = m8xx_find_end_of_memory;
ppc_md.setup_io_mappings = m8xx_map_io;
ppc_md.kbd_setkeycode = NULL;
ppc_md.kbd_getkeycode = NULL;
ppc_md.kbd_translate = NULL;
ppc_md.kbd_unexpected_up = NULL;
ppc_md.kbd_leds = NULL;
ppc_md.kbd_init_hw = NULL;
ppc_md.ppc_kbd_sysrq_xlate = NULL;
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
m8xx_ide_init();
#endif
......
arch/ppc/kernel/ppc4xx_setup.c
View file @ a4e2c5d1
......@@ -59,15 +59,6 @@
extern void abort(void);
extern void ppc4xx_find_bridges(void);
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_pretranslate(unsigned char scancode, char raw_mode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern void pckbd_leds(unsigned char leds);
extern void pckbd_init_hw(void);
extern void ppc4xx_wdt_heartbeat(void);
extern int wdt_enable;
extern unsigned long wdt_period;
......@@ -357,13 +348,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
#if defined(CONFIG_VT) && defined(CONFIG_PC_KEYBOARD)
#if defined(CONFIG_REDWOOD_4) && defined(CONFIG_STB_KB)
redwood_irkb_init();
#else
ppc_md.kbd_setkeycode = pckbd_setkeycode;
ppc_md.kbd_getkeycode = pckbd_getkeycode;
ppc_md.kbd_translate = pckbd_translate;
ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
ppc_md.kbd_leds = pckbd_leds;
ppc_md.kbd_init_hw = pckbd_init_hw;
#endif
#endif
......
arch/ppc/kernel/setup.c
View file @ a4e2c5d1
......@@ -83,7 +83,7 @@ extern void chrp_init(unsigned long r3, unsigned long r4,
#endif /* CONFIG_ALL_PPC */
#ifdef CONFIG_MAGIC_SYSRQ
unsigned long SYSRQ_KEY;
unsigned long SYSRQ_KEY = 0x54;
#endif /* CONFIG_MAGIC_SYSRQ */
#ifdef CONFIG_VGA_CONSOLE
......
arch/ppc/platforms/apus_setup.c
View file @ a4e2c5d1
......@@ -854,13 +854,6 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
/* These should not be used for the APUS yet, since it uses
the M68K keyboard now. */
ppc_md.kbd_setkeycode = apus_kbd_setkeycode;
ppc_md.kbd_getkeycode = apus_kbd_getkeycode;
ppc_md.kbd_translate = amiga_kbd_translate;
ppc_md.kbd_unexpected_up = apus_kbd_unexpected_up;
ppc_md.kbd_init_hw = apus_kbd_init_hw;
#ifdef CONFIG_SYSRQ
ppc_md.ppc_kbd_sysrq_xlate = amiga_sysrq_xlate;
SYSRQ_KEY = 0xff;
#endif
}
arch/ppc/platforms/chrp_setup.c
View file @ a4e2c5d1
......@@ -69,14 +69,6 @@ void rtas_indicator_progress(char *, unsigned short);
void btext_progress(char *, unsigned short);
extern unsigned long pmac_find_end_of_memory(void);
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern void pckbd_leds(unsigned char leds);
extern void pckbd_init_hw(void);
extern unsigned char pckbd_sysrq_xlate[128];
extern void select_adb_keyboard(void);
extern int of_show_percpuinfo(struct seq_file *, int);
......@@ -389,7 +381,7 @@ void __init chrp_init_IRQ(void)
int i;
unsigned long chrp_int_ack;
unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
#if defined(CONFIG_VT) && defined(CONFIG_ADB_KEYBOARD) && defined(XMON)
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
struct device_node *kbd;
#endif
......@@ -417,7 +409,7 @@ void __init chrp_init_IRQ(void)
irq_desc[i].handler = &i8259_pic;
i8259_init(chrp_int_ack);
#if defined(CONFIG_VT) && defined(CONFIG_ADB_KEYBOARD) && defined(XMON)
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
/* see if there is a keyboard in the device tree
with a parent of type "adb" */
for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
......@@ -447,7 +439,7 @@ chrp_init2(void)
if (ppc_md.progress)
ppc_md.progress(" Have fun! ", 0x7777);
#if defined(CONFIG_VT) && (defined(CONFIG_ADB_KEYBOARD) || defined(CONFIG_INPUT))
#if defined(CONFIG_VT) && defined(CONFIG_INPUT)
/* see if there is a keyboard in the device tree
with a parent of type "adb" */
{
......@@ -461,7 +453,7 @@ chrp_init2(void)
}
}
}
#endif /* CONFIG_VT && (CONFIG_ADB_KEYBOARD || CONFIG_INPUT) */
#endif /* CONFIG_VT && CONFIG_INPUT */
}
void __init
......@@ -502,20 +494,6 @@ chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.find_end_of_memory = pmac_find_end_of_memory;
#ifdef CONFIG_VT
/* these are adjusted in chrp_init2 if we have an ADB keyboard */
ppc_md.kbd_setkeycode = pckbd_setkeycode;
ppc_md.kbd_getkeycode = pckbd_getkeycode;
ppc_md.kbd_translate = pckbd_translate;
ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
ppc_md.kbd_leds = pckbd_leds;
ppc_md.kbd_init_hw = pckbd_init_hw;
#ifdef CONFIG_MAGIC_SYSRQ
ppc_md.ppc_kbd_sysrq_xlate = pckbd_sysrq_xlate;
SYSRQ_KEY = 0x54;
#endif /* CONFIG_MAGIC_SYSRQ */
#endif /* CONFIG_VT */
if (rtas_data) {
struct device_node *rtas;
unsigned int *p;
......
arch/ppc/platforms/gemini_setup.c
View file @ a4e2c5d1
......@@ -576,14 +576,6 @@ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.find_end_of_memory = gemini_find_end_of_memory;
ppc_md.setup_io_mappings = gemini_map_io;
/* no keyboard/mouse/video stuff yet.. */
ppc_md.kbd_setkeycode = NULL;
ppc_md.kbd_getkeycode = NULL;
ppc_md.kbd_translate = NULL;
ppc_md.kbd_unexpected_up = NULL;
ppc_md.kbd_leds = NULL;
ppc_md.kbd_init_hw = NULL;
ppc_md.ppc_kbd_sysrq_xlate = NULL;
ppc_md.pcibios_fixup_bus = gemini_pcibios_fixup;
#ifdef CONFIG_SMP
......
arch/ppc/platforms/iSeries_setup.c
View file @ a4e2c5d1
......@@ -216,12 +216,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.progress = iSeries_progress;
ppc_md.find_end_of_memory = iSeries_find_end_of_memory;
ppc_md.kbd_setkeycode = NULL;
ppc_md.kbd_getkeycode = NULL;
ppc_md.kbd_translate = NULL;
ppc_md.kbd_unexpected_up = NULL;
ppc_md.kbd_leds = NULL;
ppc_md.kbd_init_hw = NULL;
#ifdef CONFIG_PCI
ppc_md.pcibios_fixup_bus = iSeries_fixup_bus;
ppc_md.pcibios_fixup = iSeries_fixup;
......@@ -230,10 +224,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.pcibios_fixup = NULL;
#endif /* CONFIG_PCI */
#if defined(CONFIG_MAGIC_SYSRQ)
ppc_md.ppc_kbd_sysrq_xlate = NULL;
#endif
#ifdef CONFIG_SMP
ppc_md.smp_ops = &iSeries_smp_ops;
#endif /* CONFIG_SMP */
......
arch/ppc/platforms/oak_setup.c
View file @ a4e2c5d1
......@@ -117,14 +117,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.set_rtc_time = oak_set_rtc_time;
ppc_md.get_rtc_time = oak_get_rtc_time;
ppc_md.calibrate_decr = oak_calibrate_decr;
ppc_md.kbd_setkeycode = NULL;
ppc_md.kbd_getkeycode = NULL;
ppc_md.kbd_translate = NULL;
ppc_md.kbd_unexpected_up = NULL;
ppc_md.kbd_leds = NULL;
ppc_md.kbd_init_hw = NULL;
ppc_md.ppc_kbd_sysrq_xlate = NULL;
}
/*
......
arch/ppc/platforms/pmac_setup.c
View file @ a4e2c5d1
......@@ -88,26 +88,6 @@ extern void pmac_find_bridges(void);
extern int pmac_ide_check_base(ide_ioreg_t base);
extern ide_ioreg_t pmac_ide_get_base(int index);
extern int mackbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int mackbd_getkeycode(unsigned int scancode);
extern int mackbd_translate(unsigned char keycode, unsigned char *keycodep,
char raw_mode);
extern char mackbd_unexpected_up(unsigned char keycode);
extern void mackbd_leds(unsigned char leds);
extern void __init mackbd_init_hw(void);
extern int mac_hid_kbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char mac_hid_kbd_unexpected_up(unsigned char keycode);
extern void mac_hid_init_hw(void);
extern unsigned char mac_hid_kbd_sysrq_xlate[];
extern unsigned char pckbd_sysrq_xlate[];
extern unsigned char mackbd_sysrq_xlate[];
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern int keyboard_sends_linux_keycodes;
extern void pmac_nvram_update(void);
extern unsigned char pmac_nvram_read_byte(int addr);
extern void pmac_nvram_write_byte(int addr, unsigned char val);
......@@ -641,37 +621,8 @@ void __init
select_adb_keyboard(void)
{
#ifdef CONFIG_VT
#ifdef CONFIG_INPUT
ppc_md.kbd_init_hw = mac_hid_init_hw;
ppc_md.kbd_translate = mac_hid_kbd_translate;
ppc_md.kbd_unexpected_up = mac_hid_kbd_unexpected_up;
ppc_md.kbd_setkeycode = 0;
ppc_md.kbd_getkeycode = 0;
ppc_md.kbd_leds = 0;
#ifdef CONFIG_MAGIC_SYSRQ
#ifdef CONFIG_MAC_ADBKEYCODES
if (!keyboard_sends_linux_keycodes) {
ppc_md.ppc_kbd_sysrq_xlate = mac_hid_kbd_sysrq_xlate;
SYSRQ_KEY = 0x69;
} else
#endif /* CONFIG_MAC_ADBKEYCODES */
{
ppc_md.ppc_kbd_sysrq_xlate = pckbd_sysrq_xlate;
SYSRQ_KEY = 0x54;
}
#endif /* CONFIG_MAGIC_SYSRQ */
#elif defined(CONFIG_ADB_KEYBOARD)
ppc_md.kbd_setkeycode = mackbd_setkeycode;
ppc_md.kbd_getkeycode = mackbd_getkeycode;
ppc_md.kbd_translate = mackbd_translate;
ppc_md.kbd_unexpected_up = mackbd_unexpected_up;
ppc_md.kbd_leds = mackbd_leds;
ppc_md.kbd_init_hw = mackbd_init_hw;
#ifdef CONFIG_MAGIC_SYSRQ
ppc_md.ppc_kbd_sysrq_xlate = mackbd_sysrq_xlate;
SYSRQ_KEY = 0x69;
#endif /* CONFIG_MAGIC_SYSRQ */
#endif /* CONFIG_INPUT_ADBHID/CONFIG_ADB_KEYBOARD */
#endif /* CONFIG_VT */
}
......
arch/ppc/platforms/pplus_setup.c
View file @ a4e2c5d1
......@@ -77,15 +77,6 @@
TODC_ALLOC();
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern void pckbd_leds(unsigned char leds);
extern void pckbd_init_hw(void);
extern unsigned char pckbd_sysrq_xlate[128];
extern void pplus_setup_hose(void);
extern void pplus_set_VIA_IDE_native(void);
......@@ -508,19 +499,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports;
#endif
#ifdef CONFIG_VT
ppc_md.kbd_setkeycode = pckbd_setkeycode;
ppc_md.kbd_getkeycode = pckbd_getkeycode;
ppc_md.kbd_translate = pckbd_translate;
ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
ppc_md.kbd_leds = pckbd_leds;
ppc_md.kbd_init_hw = pckbd_init_hw;
#ifdef CONFIG_MAGIC_SYSRQ
ppc_md.ppc_kbd_sysrq_xlate = pckbd_sysrq_xlate;
SYSRQ_KEY = 0x54;
#endif
#endif
#ifdef CONFIG_SMP
ppc_md.smp_ops = &pplus_smp_ops;
#endif /* CONFIG_SMP */
......
arch/ppc/platforms/prep_setup.c
View file @ a4e2c5d1
......@@ -79,15 +79,6 @@ extern void rs_nvram_write_val(int addr,
unsigned char val);
extern void ibm_prep_init(void);
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern void pckbd_leds(unsigned char leds);
extern void pckbd_init_hw(void);
extern unsigned char pckbd_sysrq_xlate[];
extern void prep_find_bridges(void);
extern char saved_command_line[];
......@@ -895,19 +886,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_ide_md.default_io_base = prep_ide_default_io_base;
#endif
#ifdef CONFIG_VT
ppc_md.kbd_setkeycode = pckbd_setkeycode;
ppc_md.kbd_getkeycode = pckbd_getkeycode;
ppc_md.kbd_translate = pckbd_translate;
ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
ppc_md.kbd_leds = pckbd_leds;
ppc_md.kbd_init_hw = pckbd_init_hw;
#ifdef CONFIG_MAGIC_SYSRQ
ppc_md.ppc_kbd_sysrq_xlate = pckbd_sysrq_xlate;
SYSRQ_KEY = 0x54;
#endif
#endif
#ifdef CONFIG_SMP
ppc_md.smp_ops = &prep_smp_ops;
#endif /* CONFIG_SMP */
......
arch/ppc/platforms/sandpoint_setup.c
View file @ a4e2c5d1
......@@ -97,15 +97,6 @@
extern u_int openpic_irq(void);
extern void openpic_eoi(void);
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern void pckbd_leds(unsigned char leds);
extern void pckbd_init_hw(void);
extern unsigned char pckbd_sysrq_xlate[128];
static void sandpoint_halt(void);
......@@ -645,19 +636,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.progress = NULL;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
#ifdef CONFIG_VT
ppc_md.kbd_setkeycode = pckbd_setkeycode;
ppc_md.kbd_getkeycode = pckbd_getkeycode;
ppc_md.kbd_translate = pckbd_translate;
ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
ppc_md.kbd_leds = pckbd_leds;
ppc_md.kbd_init_hw = pckbd_init_hw;
#ifdef CONFIG_MAGIC_SYSRQ
ppc_md.ppc_kbd_sysrq_xlate = pckbd_sysrq_xlate;
SYSRQ_KEY = 0x54;
#endif
#endif
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
ppc_ide_md.default_irq = sandpoint_ide_default_irq;
ppc_ide_md.default_io_base = sandpoint_ide_default_io_base;
......
arch/ppc/platforms/spruce_setup.c
View file @ a4e2c5d1
......@@ -64,13 +64,6 @@ extern void spruce_init_IRQ(void);
extern int spruce_get_irq(struct pt_regs *);
extern void spruce_setup_hose(void);
extern int pckbd_setkeycode(unsigned int, unsigned int);
extern int pckbd_getkeycode(unsigned int);
extern int pckbd_translate(unsigned char, unsigned char *, char);
extern char pckbd_unexpected_up(unsigned char);
extern void pckbd_leds(unsigned char);
extern void pckbd_init_hw(void);
extern unsigned char pckbd_sysrq_xlate[128];
extern char cmd_line[];
/*
......@@ -279,18 +272,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#ifdef CONFIG_VT
/* Spruce has a PS2 style keyboard */
ppc_md.kbd_setkeycode = pckbd_setkeycode;
ppc_md.kbd_getkeycode = pckbd_getkeycode;
ppc_md.kbd_translate = pckbd_translate;
ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
ppc_md.kbd_leds = pckbd_leds;
ppc_md.kbd_init_hw = pckbd_init_hw;
#ifdef CONFIG_MAGIC_SYSRQ
ppc_md.kbd_sysrq_xlate = pckbd_sysrq_xlate;
SYSRQ_KEY = 0x54;
#endif
#endif
}
drivers/char/Config.help
View file @ a4e2c5d1
......@@ -633,37 +633,6 @@ CONFIG_BUSMOUSE
The module will be called busmouse.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_MOUSE
This is for machines with a mouse which is neither a serial nor a
bus mouse. Examples are PS/2 mice (such as the track balls on some
laptops) and some digitizer pads. Most people have a regular serial
MouseSystem or Microsoft mouse (made by Logitech) that plugs into a
COM port (rectangular with 9 or 25 pins). These people say N here.
If you have something else, read the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. This HOWTO contains
information about all non-serial mice, not just bus mice.
If you have a laptop, you either have to check the documentation or
experiment a bit to find out whether the trackball is a serial mouse
or not; it's best to say Y here for you.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about non-serial mice. If unsure, say Y.
CONFIG_LOGIBUSMOUSE
Logitech mouse connected to a proprietary interface card. It's
generally a round connector with 9 pins. Note that the newer mice
made by Logitech don't use the Logitech protocol anymore; for those,
you don't need this option. You want to read the Busmouse-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called busmouse.o. If you are unsure, say N and read the
HOWTO nevertheless: it will tell you what you have.
CONFIG_PSMOUSE
The PS/2 mouse connects to a special mouse port that looks much like
the keyboard port (small circular connector with 6 pins). This way,
......@@ -683,64 +652,6 @@ CONFIG_PSMOUSE
<ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get
the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>.
CONFIG_82C710_MOUSE
This is a certain kind of PS/2 mouse used on the TI Travelmate. If
you are unsure, try first to say N here and come back if the mouse
doesn't work. Read the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
CONFIG_PC110_PAD
This drives the digitizer pad on the IBM PC110 palmtop. It can turn
the digitizer pad into a PS/2 mouse emulation with tap gestures or
into an absolute pad.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called pc110pad.o.
CONFIG_MS_BUSMOUSE
These animals (also called Inport mice) are connected to an
expansion board using a round connector with 9 pins. If this is what
you have, say Y and read the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
If you are unsure, say N and read the HOWTO nevertheless: it will
tell you what you have. Also be aware that several vendors talk
about 'Microsoft busmouse' and actually mean PS/2 busmouse -- so
count the pins on the connector.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called msbusmouse.o.
CONFIG_ADBMOUSE
Say Y here if you have this type of bus mouse (4 pin connector) as
is common on Macintoshes. You may want to read the Busmouse-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called adbmouse.o.
CONFIG_ATIXL_BUSMOUSE
This is a rare type of busmouse that is connected to the back of an
ATI video card. Say Y if you have one of those. Note however that
most mice by ATI are actually Microsoft busmice; you should say Y to
"Microsoft busmouse support" above if you have one of those. Read
the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called atixlmouse.o.
If you are unsure, say N and read the HOWTO nevertheless: it will
tell you what you have.
CONFIG_QIC02_TAPE
If you have a non-SCSI tape drive like that, say Y. Or, if you want
to compile this driver as a module ( = code which can be inserted in
......
drivers/char/Config.in
View file @ a4e2c5d1
......@@ -113,22 +113,8 @@ source drivers/i2c/Config.in
mainmenu_option next_comment
comment 'Mice'
tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
if [ "$CONFIG_BUSMOUSE" != "n" ]; then
dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then
dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
fi
fi
tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
if [ "$CONFIG_MOUSE" != "n" ]; then
bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD
fi
tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
endmenu
tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
......
drivers/char/Makefile
View file @ a4e2c5d1
......@@ -155,8 +155,6 @@ obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o
obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o
obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o
obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_BUSMOUSE) += busmouse.o
......@@ -164,12 +162,7 @@ obj-$(CONFIG_DTLK) += dtlk.o
obj-$(CONFIG_R3964) += n_r3964.o
obj-$(CONFIG_APPLICOM) += applicom.o
obj-$(CONFIG_SONYPI) += sonypi.o
obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
obj-$(CONFIG_ADBMOUSE) += adbmouse.o
obj-$(CONFIG_PC110_PAD) += pc110pad.o
obj-$(CONFIG_RTC) += rtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o
ifeq ($(CONFIG_PPC),)
......@@ -235,4 +228,4 @@ $(obj)/defkeymap.c $(obj)/qtronixmap.c: $(obj)/%.c: $(src)/%.map
sed -e 's/^static *//' $@.tmp > $@
rm $@.tmp
endif
\ No newline at end of file
endif
drivers/char/adbmouse.c deleted 100644 → 0
View file @ 37c55498
/*
* Macintosh ADB Mouse driver for Linux
*
* 27 Oct 1997 Michael Schmitz
* logitech fixes by anthony tong
* further hacking by Paul Mackerras
*
* Apple mouse protocol according to:
*
* Device code shamelessly stolen from:
*/
/*
* Atari Mouse Driver for Linux
* by Robert de Vries (robert@and.nl) 19Jul93
*
* 16 Nov 1994 Andreas Schwab
* Compatibility with busmouse
* Support for three button mouse (shamelessly stolen from MiNT)
* third button wired to one of the joystick directions on joystick 1
*
* 1996/02/11 Andreas Schwab
* Module support
* Allow multiple open's
*
* Converted to use new generic busmouse code. 11 July 1998
* Russell King <rmk@arm.uk.linux.org>
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/adb_mouse.h>
#ifdef __powerpc__
#include <asm/processor.h>
#endif
#if defined(__mc68000__) || defined(MODULE)
#include <asm/setup.h>
#endif
#include "busmouse.h"
static int msedev;
static unsigned char adb_mouse_buttons[16];
extern void (*adb_mouse_interrupt_hook)(unsigned char *, int);
extern int adb_emulate_buttons;
extern int adb_button2_keycode;
extern int adb_button3_keycode;
/*
* XXX: need to figure out what ADB mouse packets mean ...
* This is the stuff stolen from the Atari driver ...
*/
static void adb_mouse_interrupt(unsigned char *buf, int nb)
{
int buttons, id;
char dx, dy;
/*
Handler 1 -- 100cpi original Apple mouse protocol.
Handler 2 -- 200cpi original Apple mouse protocol.
For Apple's standard one-button mouse protocol the data array will
contain the following values:
BITS COMMENTS
data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
data[1] = bxxx xxxx First button and x-axis motion.
data[2] = byyy yyyy Second button and y-axis motion.
Handler 4 -- Apple Extended mouse protocol.
For Apple's 3-button mouse protocol the data array will contain the
following values:
BITS COMMENTS
data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
data[1] = bxxx xxxx Left button and x-axis motion.
data[2] = byyy yyyy Second button and y-axis motion.
data[3] = byyy bxxx Third button and fourth button.
Y is additiona. high bits of y-axis motion.
X is additional high bits of x-axis motion.
'buttons' here means 'button down' states!
Button 1 (left) : bit 2, busmouse button 3
Button 2 (right) : bit 0, busmouse button 1
Button 3 (middle): bit 1, busmouse button 2
*/
/* x/y and buttons swapped */
id = (buf[0] >> 4) & 0xf;
buttons = adb_mouse_buttons[id];
/* button 1 (left, bit 2) */
buttons = (buttons & 3) | (buf[1] & 0x80 ? 4 : 0); /* 1+2 unchanged */
/* button 2 (middle) */
buttons = (buttons & 5) | (buf[2] & 0x80 ? 2 : 0); /* 2+3 unchanged */
/* button 3 (right) present?
* on a logitech mouseman, the right and mid buttons sometimes behave
* strangely until they both have been pressed after booting. */
/* data valid only if extended mouse format ! */
if (nb >= 4)
buttons = (buttons & 6) | (buf[3] & 0x80 ? 1 : 0); /* 1+3 unchanged */
adb_mouse_buttons[id] = buttons;
/* a button is down if it is down on any mouse */
for (id = 0; id < 16; ++id)
buttons &= adb_mouse_buttons[id];
dx = ((buf[2] & 0x7f) < 64 ? (buf[2] & 0x7f) : (buf[2] & 0x7f) - 128);
dy = ((buf[1] & 0x7f) < 64 ? (buf[1] & 0x7f) : (buf[1] & 0x7f) - 128);
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
if (console_loglevel >= 8)
printk(" %X %X %X dx %d dy %d \n",
buf[1], buf[2], buf[3], dx, dy);
}
static int release_mouse(struct inode *inode, struct file *file)
{
adb_mouse_interrupt_hook = NULL;
/*
* FIXME?: adb_mouse_interrupt_hook may still be executing
* on another CPU.
*/
return 0;
}
static int open_mouse(struct inode *inode, struct file *file)
{
adb_mouse_interrupt_hook = adb_mouse_interrupt;
return 0;
}
static struct busmouse adb_mouse =
{
ADB_MOUSE_MINOR, "adbmouse", THIS_MODULE, open_mouse, release_mouse, 7
};
static int __init adb_mouse_init(void)
{
#ifdef __powerpc__
if ((_machine != _MACH_chrp) && (_machine != _MACH_Pmac))
return -ENODEV;
#endif
#ifdef __mc68000__
if (!MACH_IS_MAC)
return -ENODEV;
#endif
/* all buttons up */
memset(adb_mouse_buttons, 7, sizeof(adb_mouse_buttons));
msedev = register_busmouse(&adb_mouse);
if (msedev < 0)
printk(KERN_WARNING "Unable to register ADB mouse driver.\n");
else
printk(KERN_INFO "Macintosh ADB mouse driver installed.\n");
return msedev < 0 ? msedev : 0;
}
#ifndef MODULE
/*
* XXX this function is misnamed.
* It is called if the kernel is booted with the adb_buttons=xxx
* option, which is about using ADB keyboard buttons to emulate
* mouse buttons. -- paulus
*/
static int __init adb_mouse_setup(char *str)
{
int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] >= 1) {
adb_emulate_buttons = ints[1];
if (ints[0] >= 2)
adb_button2_keycode = ints[2];
if (ints[0] >= 3)
adb_button3_keycode = ints[3];
}
return 1;
}
__setup("adb_buttons=", adb_mouse_setup);
#endif /* !MODULE */
static void __exit adb_mouse_cleanup(void)
{
unregister_busmouse(msedev);
}
module_init(adb_mouse_init);
module_exit(adb_mouse_cleanup);
MODULE_LICENSE("GPL");
drivers/char/amigamouse.c deleted 100644 → 0
View file @ 37c55498
/*
* Amiga Mouse Driver for Linux 68k by Michael Rausch
* based upon:
*
* Logitech Bus Mouse Driver for Linux
* by James Banks
*
* Mods by Matthew Dillon
* calls verify_area()
* tracks better when X is busy or paging
*
* Heavily modified by David Giller
* changed from queue- to counter- driven
* hacked out a (probably incorrect) mouse_poll
*
* Modified again by Nathan Laredo to interface with
* 0.96c-pl1 IRQ handling changes (13JUL92)
* didn't bother touching poll code.
*
* Modified the poll() code blindly to conform to the VFS
* requirements. 92.07.14 - Linus. Somebody should test it out.
*
* Modified by Johan Myreen to make room for other mice (9AUG92)
* removed assignment chr_fops[10] = &mouse_fops; see mouse.c
* renamed mouse_fops => bus_mouse_fops, made bus_mouse_fops public.
* renamed this file mouse.c => busmouse.c
*
* Modified for use in the 1.3 kernels by Jes Sorensen.
*
* Moved the isr-allocation to the mouse_{open,close} calls, as there
* is no reason to service the mouse in the vertical blank isr if
* the mouse is not in use. Jes Sorensen
*
* Converted to use new generic busmouse code. 5 Apr 1998
* Russell King <rmk@arm.uk.linux.org>
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/logibusmouse.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include "busmouse.h"
#if AMIGA_OLD_INT
#define AMI_MSE_INT_ON() mouseint_allowed = 1
#define AMI_MSE_INT_OFF() mouseint_allowed = 0
static int mouseint_allowed;
#endif
static int msedev;
static void mouse_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
static int lastx=0, lasty=0;
int dx, dy;
int nx, ny;
unsigned char buttons;
unsigned short joy0dat, potgor;
#if AMIGA_OLD_INT
if(!mouseint_allowed)
return;
AMI_MSE_INT_OFF();
#endif
/*
* This routine assumes, just like Kickstart, that the mouse
* has not moved more than 127 ticks since last VBL.
*/
joy0dat = custom.joy0dat;
nx = joy0dat & 0xff;
ny = joy0dat >> 8;
dx = nx - lastx;
if (dx < - 127)
dx = (256 + nx) - lastx;
if (dx > 127)
dx = (nx - 256) - lastx;
dy = ny - lasty;
if (dy < - 127)
dy = (256 + ny) - lasty;
if (dy > 127)
dy = (ny - 256) - lasty;
lastx = nx;
lasty = ny;
#if 0
dx = -lastdx;
dx += (lastdx = joy0dat & 0xff);
if (dx < -127)
dx = -255-dx; /* underrun */
else
if (dx > 127)
dx = 255-dx; /* overflow */
dy = -lastdy;
dy += (lastdy = joy0dat >> 8);
if (dy < -127)
dy = -255-dy;
else
if (dy > 127)
dy = 255-dy;
#endif
potgor = custom.potgor;
buttons = (ciaa.pra & 0x40 ? 4 : 0) | /* left button; note that the bits are low-active, as are the expected results -> double negation */
#if 1
(potgor & 0x0100 ? 2 : 0) | /* middle button; emulation goes here */
#endif
(potgor & 0x0400 ? 1 : 0); /* right button */
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
#if AMIGA_OLD_INT
AMI_MSE_INT_ON();
#endif
}
/*
* close access to the mouse
*/
static int release_mouse(struct inode * inode, struct file * file)
{
free_irq(IRQ_AMIGA_VERTB, mouse_interrupt);
#if AMIGA_OLD_INT
AMI_MSE_INT_OFF();
#endif
return 0;
}
/*
* open access to the mouse, currently only one open is
* allowed.
*/
static int open_mouse(struct inode * inode, struct file * file)
{
/*
* use VBL to poll mouse deltas
*/
if(request_irq(IRQ_AMIGA_VERTB, mouse_interrupt, 0,
"Amiga mouse", mouse_interrupt)) {
printk(KERN_INFO "Installing Amiga mouse failed.\n");
return -EIO;
}
#if AMIGA_OLD_INT
AMI_MSE_INT_ON();
#endif
return 0;
}
static struct busmouse amigamouse = {
AMIGAMOUSE_MINOR, "amigamouse", THIS_MODULE, open_mouse, release_mouse, 7
};
static int __init amiga_mouse_init(void)
{
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
return -ENODEV;
if (!request_mem_region(CUSTOM_PHYSADDR+10, 2, "amigamouse [Denise]"))
return -EBUSY;
custom.joytest = 0; /* reset counters */
#if AMIGA_OLD_INT
AMI_MSE_INT_OFF();
#endif
msedev = register_busmouse(&amigamouse);
if (msedev < 0)
printk(KERN_WARNING "Unable to install Amiga mouse driver.\n");
else
printk(KERN_INFO "Amiga mouse installed.\n");
return msedev < 0 ? msedev : 0;
}
static void __exit amiga_mouse_exit(void)
{
unregister_busmouse(msedev);
release_mem_region(CUSTOM_PHYSADDR+10, 2);
}
module_init(amiga_mouse_init);
module_exit(amiga_mouse_exit);
MODULE_LICENSE("GPL");
drivers/char/atixlmouse.c deleted 100644 → 0
View file @ 37c55498
/*
* ATI XL Bus Mouse Driver for Linux
* by Bob Harris (rth@sparta.com)
*
* Uses VFS interface for linux 0.98 (01OCT92)
*
* Modified by Chris Colohan (colohan@eecg.toronto.edu)
* Modularised 8-Sep-95 Philip Blundell <pjb27@cam.ac.uk>
*
* Converted to use new generic busmouse code. 5 Apr 1998
* Russell King <rmk@arm.uk.linux.org>
*
* version 0.3a
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/irq.h>
#include "busmouse.h"
#define ATIXL_MOUSE_IRQ 5 /* H/W interrupt # set up on ATIXL board */
#define ATIXL_BUSMOUSE 3 /* Minor device # (mknod c 10 3 /dev/bm) */
/* ATI XL Inport Busmouse Definitions */
#define ATIXL_MSE_DATA_PORT 0x23d
#define ATIXL_MSE_SIGNATURE_PORT 0x23e
#define ATIXL_MSE_CONTROL_PORT 0x23c
#define ATIXL_MSE_READ_BUTTONS 0x00
#define ATIXL_MSE_READ_X 0x01
#define ATIXL_MSE_READ_Y 0x02
/* Some nice ATI XL macros */
/* Select IR7, HOLD UPDATES (INT ENABLED), save X,Y */
#define ATIXL_MSE_DISABLE_UPDATE() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \
outb( (0x20 | inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); }
/* Select IR7, Enable updates (INT ENABLED) */
#define ATIXL_MSE_ENABLE_UPDATE() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \
outb( (0xdf & inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); }
/* Select IR7 - Mode Register, NO INTERRUPTS */
#define ATIXL_MSE_INT_OFF() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \
outb( (0xe7 & inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); }
/* Select IR7 - Mode Register, DATA INTERRUPTS ENABLED */
#define ATIXL_MSE_INT_ON() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \
outb( (0x08 | inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); }
/* Same general mouse structure */
static int msedev;
static void mouse_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
char dx, dy, buttons;
ATIXL_MSE_DISABLE_UPDATE(); /* Note that interrupts are still enabled */
outb(ATIXL_MSE_READ_X, ATIXL_MSE_CONTROL_PORT); /* Select IR1 - X movement */
dx = inb( ATIXL_MSE_DATA_PORT);
outb(ATIXL_MSE_READ_Y, ATIXL_MSE_CONTROL_PORT); /* Select IR2 - Y movement */
dy = inb( ATIXL_MSE_DATA_PORT);
outb(ATIXL_MSE_READ_BUTTONS, ATIXL_MSE_CONTROL_PORT); /* Select IR0 - Button Status */
buttons = inb( ATIXL_MSE_DATA_PORT);
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
ATIXL_MSE_ENABLE_UPDATE();
}
static int release_mouse(struct inode * inode, struct file * file)
{
ATIXL_MSE_INT_OFF(); /* Interrupts are really shut down here */
free_irq(ATIXL_MOUSE_IRQ, NULL);
return 0;
}
static int open_mouse(struct inode * inode, struct file * file)
{
if (request_irq(ATIXL_MOUSE_IRQ, mouse_interrupt, 0, "ATIXL mouse", NULL))
return -EBUSY;
ATIXL_MSE_INT_ON(); /* Interrupts are really enabled here */
return 0;
}
static struct busmouse atixlmouse = {
ATIXL_BUSMOUSE, "atixl", THIS_MODULE, open_mouse, release_mouse, 0
};
static int __init atixl_busmouse_init(void)
{
unsigned char a,b,c;
/*
* We must request the resource and claim it atomically
* nowdays. We can throw it away on error. Otherwise we
* may race another module load of the same I/O
*/
if (!request_region(ATIXL_MSE_DATA_PORT, 3, "atixlmouse"))
return -EIO;
a = inb( ATIXL_MSE_SIGNATURE_PORT ); /* Get signature */
b = inb( ATIXL_MSE_SIGNATURE_PORT );
c = inb( ATIXL_MSE_SIGNATURE_PORT );
if (( a != b ) && ( a == c ))
printk(KERN_INFO "\nATI Inport ");
else
{
release_region(ATIXL_MSE_DATA_PORT,3);
return -EIO;
}
outb(0x80, ATIXL_MSE_CONTROL_PORT); /* Reset the Inport device */
outb(0x07, ATIXL_MSE_CONTROL_PORT); /* Select Internal Register 7 */
outb(0x0a, ATIXL_MSE_DATA_PORT); /* Data Interrupts 8+, 1=30hz, 2=50hz, 3=100hz, 4=200hz rate */
msedev = register_busmouse(&atixlmouse);
if (msedev < 0)
{
printk("Bus mouse initialisation error.\n");
release_region(ATIXL_MSE_DATA_PORT,3); /* Was missing */
}
else
printk("Bus mouse detected and installed.\n");
return msedev < 0 ? msedev : 0;
}
static void __exit atixl_cleanup (void)
{
release_region(ATIXL_MSE_DATA_PORT, 3);
unregister_busmouse(msedev);
}
module_init(atixl_busmouse_init);
module_exit(atixl_cleanup);
MODULE_LICENSE("GPL");
drivers/char/logibusmouse.c deleted 100644 → 0
View file @ 37c55498
/*
* Logitech Bus Mouse Driver for Linux
* by James Banks
*
* Mods by Matthew Dillon
* calls verify_area()
* tracks better when X is busy or paging
*
* Heavily modified by David Giller
* changed from queue- to counter- driven
* hacked out a (probably incorrect) mouse_select
*
* Modified again by Nathan Laredo to interface with
* 0.96c-pl1 IRQ handling changes (13JUL92)
* didn't bother touching select code.
*
* Modified the select() code blindly to conform to the VFS
* requirements. 92.07.14 - Linus. Somebody should test it out.
*
* Modified by Johan Myreen to make room for other mice (9AUG92)
* removed assignment chr_fops[10] = &mouse_fops; see mouse.c
* renamed mouse_fops => bus_mouse_fops, made bus_mouse_fops public.
* renamed this file mouse.c => busmouse.c
*
* Minor addition by Cliff Matthews
* added fasync support
*
* Modularised 6-Sep-95 Philip Blundell <pjb27@cam.ac.uk>
*
* Replaced dumb busy loop with udelay() 16 Nov 95
* Nathan Laredo <laredo@gnu.ai.mit.edu>
*
* Track I/O ports with request_region(). 12 Dec 95 Philip Blundell
*
* Converted to use new generic busmouse code. 5 Apr 1998
* Russell King <rmk@arm.uk.linux.org>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/logibusmouse.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/poll.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/irq.h>
#include "busmouse.h"
static int msedev;
static int mouse_irq = MOUSE_IRQ;
MODULE_PARM(mouse_irq, "i");
#ifndef MODULE
static int __init bmouse_setup(char *str)
{
int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0)
mouse_irq=ints[1];
return 1;
}
__setup("logi_busmouse=", bmouse_setup);
#endif /* !MODULE */
static void mouse_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
char dx, dy;
unsigned char buttons;
outb(MSE_READ_X_LOW, MSE_CONTROL_PORT);
dx = (inb(MSE_DATA_PORT) & 0xf);
outb(MSE_READ_X_HIGH, MSE_CONTROL_PORT);
dx |= (inb(MSE_DATA_PORT) & 0xf) << 4;
outb(MSE_READ_Y_LOW, MSE_CONTROL_PORT );
dy = (inb(MSE_DATA_PORT) & 0xf);
outb(MSE_READ_Y_HIGH, MSE_CONTROL_PORT);
buttons = inb(MSE_DATA_PORT);
dy |= (buttons & 0xf) << 4;
buttons = ((buttons >> 5) & 0x07);
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
MSE_INT_ON();
}
/*
* close access to the mouse
*/
static int close_mouse(struct inode * inode, struct file * file)
{
MSE_INT_OFF();
free_irq(mouse_irq, NULL);
return 0;
}
/*
* open access to the mouse
*/
static int open_mouse(struct inode * inode, struct file * file)
{
if (request_irq(mouse_irq, mouse_interrupt, 0, "busmouse", NULL))
return -EBUSY;
MSE_INT_ON();
return 0;
}
static struct busmouse busmouse = {
LOGITECH_BUSMOUSE, "busmouse", THIS_MODULE, open_mouse, close_mouse, 7
};
static int __init logi_busmouse_init(void)
{
if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "busmouse"))
return -EIO;
outb(MSE_CONFIG_BYTE, MSE_CONFIG_PORT);
outb(MSE_SIGNATURE_BYTE, MSE_SIGNATURE_PORT);
udelay(100L); /* wait for reply from mouse */
if (inb(MSE_SIGNATURE_PORT) != MSE_SIGNATURE_BYTE) {
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
return -EIO;
}
outb(MSE_DEFAULT_MODE, MSE_CONFIG_PORT);
MSE_INT_OFF();
msedev = register_busmouse(&busmouse);
if (msedev < 0) {
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
printk(KERN_WARNING "Unable to register busmouse driver.\n");
}
else
printk(KERN_INFO "Logitech busmouse installed.\n");
return msedev < 0 ? msedev : 0;
}
static void __exit logi_busmouse_cleanup (void)
{
unregister_busmouse(msedev);
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
}
module_init(logi_busmouse_init);
module_exit(logi_busmouse_cleanup);
MODULE_LICENSE("GPL");
drivers/char/msbusmouse.c deleted 100644 → 0
View file @ 37c55498
/*
* Microsoft busmouse driver based on Logitech driver (see busmouse.c)
*
* Microsoft BusMouse support by Teemu Rantanen (tvr@cs.hut.fi) (02AUG92)
*
* Microsoft Bus Mouse support modified by Derrick Cole (cole@concert.net)
* 8/28/92
*
* Microsoft Bus Mouse support folded into 0.97pl4 code
* by Peter Cervasio (pete%q106fm.uucp@wupost.wustl.edu) (08SEP92)
* Changes: Logitech and Microsoft support in the same kernel.
* Defined new constants in busmouse.h for MS mice.
* Added int mse_busmouse_type to distinguish busmouse types
* Added a couple of new functions to handle differences in using
* MS vs. Logitech (where the int variable wasn't appropriate).
*
* Modified by Peter Cervasio (address above) (26SEP92)
* Changes: Included code to (properly?) detect when a Microsoft mouse is
* really attached to the machine. Don't know what this does to
* Logitech bus mice, but all it does is read ports.
*
* Modified by Christoph Niemann (niemann@rubdv15.etdv.ruhr-uni-bochum.de)
* Changes: Better interrupt-handler (like in busmouse.c).
* Some changes to reduce code-size.
* Changed detection code to use inb_p() instead of doing empty
* loops to delay i/o.
*
* Modularised 8-Sep-95 Philip Blundell <pjb27@cam.ac.uk>
*
* Converted to use new generic busmouse code. 5 Apr 1998
* Russell King <rmk@arm.uk.linux.org>
*
* version 0.3b
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/logibusmouse.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/irq.h>
#include "busmouse.h"
static int msedev;
static int mouse_irq = MOUSE_IRQ;
MODULE_PARM(mouse_irq, "i");
#ifndef MODULE
static int __init msmouse_setup(char *str)
{
int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0)
mouse_irq=ints[1];
return 1;
}
__setup("msmouse=",msmouse_setup);
#endif /* !MODULE */
static void ms_mouse_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
char dx, dy;
unsigned char buttons;
outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT);
outb((inb(MS_MSE_DATA_PORT) | 0x20), MS_MSE_DATA_PORT);
outb(MS_MSE_READ_X, MS_MSE_CONTROL_PORT);
dx = inb(MS_MSE_DATA_PORT);
outb(MS_MSE_READ_Y, MS_MSE_CONTROL_PORT);
dy = inb(MS_MSE_DATA_PORT);
outb(MS_MSE_READ_BUTTONS, MS_MSE_CONTROL_PORT);
buttons = ~(inb(MS_MSE_DATA_PORT)) & 0x07;
outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT);
outb((inb(MS_MSE_DATA_PORT) & 0xdf), MS_MSE_DATA_PORT);
/* why did the original have:
* if (dx != 0 || dy != 0 || buttons != mouse.buttons ||
* ((~buttons) & 0x07))
* ^^^^^^^^^^^^^^^^^^^ this?
*/
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
}
static int release_mouse(struct inode * inode, struct file * file)
{
MS_MSE_INT_OFF();
free_irq(mouse_irq, NULL);
return 0;
}
static int open_mouse(struct inode * inode, struct file * file)
{
if (request_irq(mouse_irq, ms_mouse_interrupt, 0, "MS Busmouse", NULL))
return -EBUSY;
outb(MS_MSE_START, MS_MSE_CONTROL_PORT);
MS_MSE_INT_ON();
return 0;
}
static struct busmouse msbusmouse = {
MICROSOFT_BUSMOUSE, "msbusmouse", THIS_MODULE, open_mouse, release_mouse, 0
};
static int __init ms_bus_mouse_init(void)
{
int present = 0;
int mse_byte, i;
if (check_region(MS_MSE_CONTROL_PORT, 0x04))
return -ENODEV;
if (inb_p(MS_MSE_SIGNATURE_PORT) == 0xde) {
mse_byte = inb_p(MS_MSE_SIGNATURE_PORT);
for (i = 0; i < 4; i++) {
if (inb_p(MS_MSE_SIGNATURE_PORT) == 0xde) {
if (inb_p(MS_MSE_SIGNATURE_PORT) == mse_byte)
present = 1;
else
present = 0;
} else
present = 0;
}
}
if (present == 0)
return -EIO;
if (!request_region(MS_MSE_CONTROL_PORT, 0x04, "MS Busmouse"))
return -EIO;
MS_MSE_INT_OFF();
msedev = register_busmouse(&msbusmouse);
if (msedev < 0) {
printk(KERN_WARNING "Unable to register msbusmouse driver.\n");
release_region(MS_MSE_CONTROL_PORT, 0x04);
}
else
printk(KERN_INFO "Microsoft BusMouse detected and installed.\n");
return msedev < 0 ? msedev : 0;
}
static void __exit ms_bus_mouse_exit(void)
{
unregister_busmouse(msedev);
release_region(MS_MSE_CONTROL_PORT, 0x04);
}
module_init(ms_bus_mouse_init)
module_exit(ms_bus_mouse_exit)
MODULE_LICENSE("GPL");
drivers/char/pc110pad.c deleted 100644 → 0
View file @ 37c55498
This diff is collapsed.
drivers/char/pc110pad.h deleted 100644 → 0
View file @ 37c55498
#ifndef _PC110PAD_H
#define _PC110PAD_H
#include <linux/ioctl.h>
enum pc110pad_mode {
PC110PAD_RAW, /* bytes as they come out of the hardware */
PC110PAD_RARE, /* debounced up/down and absolute x,y */
PC110PAD_DEBUG, /* up/down, debounced, transitions, button */
PC110PAD_PS2, /* ps2 relative (default) */
};
struct pc110pad_params {
enum pc110pad_mode mode;
int bounce_interval;
int tap_interval;
int irq;
int io;
};
#define MS *HZ/1000
/* Appears as device major=10 (MISC), minor=PC110_PAD */
#define PC110PAD_IOCTL_TYPE 0x9a
#define PC110PADIOCGETP _IOR(PC110PAD_IOCTL_TYPE, 0, struct pc110pad_params)
#define PC110PADIOCSETP _IOW(PC110PAD_IOCTL_TYPE, 1, struct pc110pad_params)
#endif /* _PC110PAD_H */
drivers/char/pc_keyb.c
View file @ a4e2c5d1
......@@ -912,6 +912,8 @@ static char * __init initialize_kbd(void)
void __init pckbd_init_hw(void)
{
#ifndef CONFIG_SERIO_I8042
kbd_request_region();
/* Flush any pending input. */
......@@ -935,6 +937,7 @@ void __init pckbd_init_hw(void)
/* Ok, finally allocate the IRQ, and off we go.. */
kbd_request_irq(keyboard_interrupt);
#endif
}
#if defined CONFIG_PSMOUSE
......@@ -1213,6 +1216,7 @@ static struct miscdevice psaux_mouse = {
static int __init psaux_init(void)
{
#ifndef CONFIG_SERIO_I8042
int retval;
if (!detect_auxiliary_port())
......@@ -1241,6 +1245,7 @@ static int __init psaux_init(void)
#endif /* INITIALIZE_MOUSE */
kbd_write_command(KBD_CCMD_MOUSE_DISABLE); /* Disable aux device. */
kbd_write_cmd(AUX_INTS_OFF); /* Disable controller ints. */
#endif
return 0;
}
......
drivers/char/qpmouse.c deleted 100644 → 0
View file @ 37c55498
/*
* linux/drivers/char/qpmouse.c
*
* Driver for a 82C710 C&T mouse interface chip.
*
* Based on the PS/2 driver by Johan Myreen.
*
* Corrections in device setup for some laptop mice & trackballs.
* 02Feb93 (troyer@saifr00.cfsat.Honeywell.COM,mch@wimsey.bc.ca)
*
* Modified by Johan Myreen (jem@iki.fi) 04Aug93
* to include support for QuickPort mouse.
*
* Changed references to "QuickPort" with "82C710" since "QuickPort"
* is not what this driver is all about -- QuickPort is just a
* connector type, and this driver is for the mouse port on the Chips
* & Technologies 82C710 interface chip. 15Nov93 jem@iki.fi
*
* Added support for SIGIO. 28Jul95 jem@iki.fi
*
* Rearranged SIGIO support to use code from tty_io. 9Sept95 ctm@ardi.com
*
* Modularised 8-Sep-95 Philip Blundell <pjb27@cam.ac.uk>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/fcntl.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/semaphore.h>
#include <linux/pc_keyb.h> /* mouse enable command.. */
/*
* We use the same minor number as the PS/2 mouse for (bad) historical
* reasons..
*/
#define PSMOUSE_MINOR 1 /* Minor device # for this mouse */
#define QP_BUF_SIZE 2048
struct qp_queue {
unsigned long head;
unsigned long tail;
wait_queue_head_t proc_list;
struct fasync_struct *fasync;
unsigned char buf[QP_BUF_SIZE];
};
static struct qp_queue *queue;
static unsigned int get_from_queue(void)
{
unsigned int result;
unsigned long flags;
save_flags(flags);
cli();
result = queue->buf[queue->tail];
queue->tail = (queue->tail + 1) & (QP_BUF_SIZE-1);
restore_flags(flags);
return result;
}
static inline int queue_empty(void)
{
return queue->head == queue->tail;
}
static int fasync_qp(int fd, struct file *filp, int on)
{
int retval;
retval = fasync_helper(fd, filp, on, &queue->fasync);
if (retval < 0)
return retval;
return 0;
}
/*
* 82C710 Interface
*/
#define QP_DATA 0x310 /* Data Port I/O Address */
#define QP_STATUS 0x311 /* Status Port I/O Address */
#define QP_DEV_IDLE 0x01 /* Device Idle */
#define QP_RX_FULL 0x02 /* Device Char received */
#define QP_TX_IDLE 0x04 /* Device XMIT Idle */
#define QP_RESET 0x08 /* Device Reset */
#define QP_INTS_ON 0x10 /* Device Interrupt On */
#define QP_ERROR_FLAG 0x20 /* Device Error */
#define QP_CLEAR 0x40 /* Device Clear */
#define QP_ENABLE 0x80 /* Device Enable */
#define QP_IRQ 12
static int qp_present;
static int qp_count;
static spinlock_t qp_count_lock = SPIN_LOCK_UNLOCKED;
static int qp_data = QP_DATA;
static int qp_status = QP_STATUS;
static int poll_qp_status(void);
static int probe_qp(void);
/*
* Interrupt handler for the 82C710 mouse port. A character
* is waiting in the 82C710.
*/
static void qp_interrupt(int cpl, void *dev_id, struct pt_regs * regs)
{
int head = queue->head;
int maxhead = (queue->tail-1) & (QP_BUF_SIZE-1);
add_mouse_randomness(queue->buf[head] = inb(qp_data));
if (head != maxhead) {
head++;
head &= QP_BUF_SIZE-1;
}
queue->head = head;
kill_fasync(&queue->fasync, SIGIO, POLL_IN);
wake_up_interruptible(&queue->proc_list);
}
static int release_qp(struct inode * inode, struct file * file)
{
unsigned char status;
fasync_qp(-1, file, 0);
spin_lock( &qp_count_lock );
if (!--qp_count) {
if (!poll_qp_status())
printk(KERN_WARNING "Warning: Mouse device busy in release_qp()\n");
status = inb_p(qp_status);
outb_p(status & ~(QP_ENABLE|QP_INTS_ON), qp_status);
if (!poll_qp_status())
printk(KERN_WARNING "Warning: Mouse device busy in release_qp()\n");
free_irq(QP_IRQ, NULL);
}
spin_unlock( &qp_count_lock );
return 0;
}
/*
* Install interrupt handler.
* Enable the device, enable interrupts.
*/
static int open_qp(struct inode * inode, struct file * file)
{
unsigned char status;
if (!qp_present)
return -EINVAL;
spin_lock( &qp_count_lock );
if (qp_count++)
{
spin_unlock( &qp_count_lock );
return 0;
}
spin_unlock( &qp_count_lock );
if (request_irq(QP_IRQ, qp_interrupt, 0, "PS/2 Mouse", NULL)) {
qp_count--;
return -EBUSY;
}
status = inb_p(qp_status);
status |= (QP_ENABLE|QP_RESET);
outb_p(status, qp_status);
status &= ~(QP_RESET);
outb_p(status, qp_status);
queue->head = queue->tail = 0; /* Flush input queue */
status |= QP_INTS_ON;
outb_p(status, qp_status); /* Enable interrupts */
while (!poll_qp_status()) {
printk(KERN_ERR "Error: Mouse device busy in open_qp()\n");
qp_count--;
status &= ~(QP_ENABLE|QP_INTS_ON);
outb_p(status, qp_status);
free_irq(QP_IRQ, NULL);
return -EBUSY;
}
outb_p(AUX_ENABLE_DEV, qp_data); /* Wake up mouse */
return 0;
}
/*
* Write to the 82C710 mouse device.
*/
static ssize_t write_qp(struct file * file, const char * buffer,
size_t count, loff_t *ppos)
{
ssize_t i = count;
while (i--) {
char c;
if (!poll_qp_status())
return -EIO;
get_user(c, buffer++);
outb_p(c, qp_data);
}
file->f_dentry->d_inode->i_mtime = CURRENT_TIME;
return count;
}
static unsigned int poll_qp(struct file *file, poll_table * wait)
{
poll_wait(file, &queue->proc_list, wait);
if (!queue_empty())
return POLLIN | POLLRDNORM;
return 0;
}
/*
* Wait for device to send output char and flush any input char.
*/
#define MAX_RETRIES (60)
static int poll_qp_status(void)
{
int retries=0;
while ((inb(qp_status)&(QP_RX_FULL|QP_TX_IDLE|QP_DEV_IDLE))
!= (QP_DEV_IDLE|QP_TX_IDLE)
&& retries < MAX_RETRIES) {
if (inb_p(qp_status)&(QP_RX_FULL))
inb_p(qp_data);
current->state = TASK_INTERRUPTIBLE;
schedule_timeout((5*HZ + 99) / 100);
retries++;
}
return !(retries==MAX_RETRIES);
}
/*
* Put bytes from input queue to buffer.
*/
static ssize_t read_qp(struct file * file, char * buffer,
size_t count, loff_t *ppos)
{
DECLARE_WAITQUEUE(wait, current);
ssize_t i = count;
unsigned char c;
if (queue_empty()) {
if (file->f_flags & O_NONBLOCK)
return -EAGAIN;
add_wait_queue(&queue->proc_list, &wait);
repeat:
set_current_state(TASK_INTERRUPTIBLE);
if (queue_empty() && !signal_pending(current)) {
schedule();
goto repeat;
}
current->state = TASK_RUNNING;
remove_wait_queue(&queue->proc_list, &wait);
}
while (i > 0 && !queue_empty()) {
c = get_from_queue();
put_user(c, buffer++);
i--;
}
if (count-i) {
file->f_dentry->d_inode->i_atime = CURRENT_TIME;
return count-i;
}
if (signal_pending(current))
return -ERESTARTSYS;
return 0;
}
struct file_operations qp_fops = {
owner: THIS_MODULE,
read: read_qp,
write: write_qp,
poll: poll_qp,
open: open_qp,
release: release_qp,
fasync: fasync_qp,
};
/*
* Initialize driver.
*/
static struct miscdevice qp_mouse = {
minor: PSMOUSE_MINOR,
name: "QPmouse",
fops: &qp_fops,
};
/*
* Function to read register in 82C710.
*/
static inline unsigned char read_710(unsigned char index)
{
outb_p(index, 0x390); /* Write index */
return inb_p(0x391); /* Read the data */
}
/*
* See if we can find a 82C710 device. Read mouse address.
*/
static int __init probe_qp(void)
{
outb_p(0x55, 0x2fa); /* Any value except 9, ff or 36 */
outb_p(0xaa, 0x3fa); /* Inverse of 55 */
outb_p(0x36, 0x3fa); /* Address the chip */
outb_p(0xe4, 0x3fa); /* 390/4; 390 = config address */
outb_p(0x1b, 0x2fa); /* Inverse of e4 */
if (read_710(0x0f) != 0xe4) /* Config address found? */
return 0; /* No: no 82C710 here */
qp_data = read_710(0x0d)*4; /* Get mouse I/O address */
qp_status = qp_data+1;
outb_p(0x0f, 0x390);
outb_p(0x0f, 0x391); /* Close config mode */
return 1;
}
static char msg_banner[] __initdata = KERN_INFO "82C710 type pointing device detected -- driver installed.\n";
static char msg_nomem[] __initdata = KERN_ERR "qpmouse: no queue memory.\n";
static int __init qpmouse_init_driver(void)
{
if (!probe_qp())
return -EIO;
printk(msg_banner);
/* printk("82C710 address = %x (should be 0x310)\n", qp_data); */
queue = (struct qp_queue *) kmalloc(sizeof(*queue), GFP_KERNEL);
if (queue == NULL) {
printk(msg_nomem);
return -ENOMEM;
}
qp_present = 1;
misc_register(&qp_mouse);
memset(queue, 0, sizeof(*queue));
queue->head = queue->tail = 0;
init_waitqueue_head(&queue->proc_list);
return 0;
}
static void __exit qpmouse_exit_driver(void)
{
misc_deregister(&qp_mouse);
kfree(queue);
}
module_init(qpmouse_init_driver);
module_exit(qpmouse_exit_driver);
MODULE_LICENSE("GPL");
drivers/input/Config.help
View file @ a4e2c5d1
......@@ -98,3 +98,12 @@ CONFIG_INPUT_EVBUG
inserted in and removed from the running kernel whenever you want).
The module will be called joydev.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_INPUT_UINPUT
Say Y here if you want to support user level drivers for input
subsystem accessible under char device 10:223 - /dev/input/uinput.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called uinput.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
drivers/input/Config.in
View file @ a4e2c5d1
......@@ -23,6 +23,7 @@ if [ "$CONFIG_INPUT_TSDEV" != "n" ]; then
fi
dep_tristate ' Event interface' CONFIG_INPUT_EVDEV $CONFIG_INPUT
dep_tristate ' Event debugging' CONFIG_INPUT_EVBUG $CONFIG_INPUT
dep_tristate ' User level driver support' CONFIG_INPUT_UINPUT $CONFIG_INPUT $CONFIG_EXPERIMENTAL
comment 'Input I/O drivers'
source drivers/input/gameport/Config.in
......
drivers/input/Makefile
View file @ a4e2c5d1
......@@ -16,6 +16,7 @@ obj-$(CONFIG_INPUT_EVDEV) += evdev.o
obj-$(CONFIG_INPUT_TSDEV) += tsdev.o
obj-$(CONFIG_INPUT_POWER) += power.o
obj-$(CONFIG_INPUT_EVBUG) += evbug.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_KEYBOARD) += keyboard/
obj-$(CONFIG_INPUT_MOUSE) += mouse/
......
drivers/input/evbug.c
View file @ a4e2c5d1
......@@ -37,6 +37,8 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Input driver event debug module");
MODULE_LICENSE("GPL");
static char evbug_name[] = "evbug";
static void evbug_event(struct input_handle *handle, unsigned int type, unsigned int code, int value)
{
printk(KERN_DEBUG "evbug.c: Event. Dev: %s, Type: %d, Code: %d, Value: %d\n", handle->dev->phys, type, code, value);
......@@ -52,6 +54,7 @@ static struct input_handle *evbug_connect(struct input_handler *handler, struct
handle->dev = dev;
handle->handler = handler;
handle->name = evbug_name;
input_open_device(handle);
......
drivers/input/gameport/Config.help
View file @ a4e2c5d1
......@@ -34,7 +34,7 @@ CONFIG_GAMEPORT_L4
The module will be called lightning.o. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
CONFIG_INPUT_EMU10K1
CONFIG_GAMEPORT_EMU10K1
Say Y here if you have a SoundBlaster Live! or SoundBlaster
Audigy card and want to use its gameport.
......@@ -52,7 +52,7 @@ CONFIG_GAMEPORT_VORTEX
The module will be called vortex.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_GAMEPORT_CS461x
CONFIG_GAMEPORT_CS461X
Say Y here if you have a Cirrus CS461x aka "Crystal SoundFusion"
PCI audio accelerator and want to use its gameport.
......
drivers/input/gameport/Config.in
View file @ a4e2c5d1
......@@ -13,7 +13,7 @@ fi
dep_tristate ' Classic ISA and PnP gameport support' CONFIG_GAMEPORT_NS558 $CONFIG_GAMEPORT
dep_tristate ' PDPI Lightning 4 gamecard support' CONFIG_GAMEPORT_L4 $CONFIG_GAMEPORT
dep_tristate ' SB Live and Audigy gameport support' CONFIG_INPUT_EMU10K1 $CONFIG_GAMEPORT
dep_tristate ' SB Live and Audigy gameport support' CONFIG_GAMEPORT_EMU10K1 $CONFIG_GAMEPORT
dep_tristate ' Aureal Vortex, Vortex 2 gameport support' CONFIG_GAMEPORT_VORTEX $CONFIG_GAMEPORT
dep_tristate ' ForteMedia FM801 gameport support' CONFIG_GAMEPORT_FM801 $CONFIG_GAMEPORT
dep_tristate ' Crystal SoundFusion gameport support' CONFIG_GAMEPORT_CS461x $CONFIG_GAMEPORT
drivers/input/joystick/Config.help
View file @ a4e2c5d1
......@@ -103,24 +103,6 @@ CONFIG_JOYSTICK_TMDC
The module will be called tmdc.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_JOYSTICK_IFORCE_USB
Say Y here if you have an I-Force joystick or steering wheel
connected to your USB port.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called iforce.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_JOYSTICK_IFORCE_232
Say Y here if you have an I-Force joystick or steering wheel
connected to your serial (COM) port.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called iforce.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_JOYSTICK_WARRIOR
Say Y here if you have a Logitech WingMan Warrior joystick connected
to your computer's serial port.
......
drivers/input/joystick/Config.in
View file @ a4e2c5d1
......@@ -14,9 +14,7 @@ dep_tristate ' Guillemot joysticks and gamepads' CONFIG_JOYSTICK_GUILLEMOT $CON
dep_tristate ' InterAct digital joysticks and gamepads' CONFIG_JOYSTICK_INTERACT $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
dep_tristate ' Microsoft SideWinder digital joysticks and gamepads' CONFIG_JOYSTICK_SIDEWINDER $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
dep_tristate ' ThrustMaster DirectConnect joysticks and gamepads' CONFIG_JOYSTICK_TMDC $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_GAMEPORT
dep_tristate ' I-Force USB joysticks and wheels' CONFIG_JOYSTICK_IFORCE_USB $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_USB
dep_tristate ' I-Force Serial joysticks and wheels' CONFIG_JOYSTICK_IFORCE_232 $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_SERIO
source drivers/input/joystick/iforce/Config.in
dep_tristate ' Logitech WingMan Warrior joystick' CONFIG_JOYSTICK_WARRIOR $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_SERIO
dep_tristate ' LogiCad3d Magellan/SpaceMouse 6dof controllers' CONFIG_JOYSTICK_MAGELLAN $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_SERIO
dep_tristate ' SpaceTec SpaceOrb/Avenger 6dof controllers' CONFIG_JOYSTICK_SPACEORB $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK $CONFIG_SERIO
......
drivers/input/joystick/Makefile
View file @ a4e2c5d1
......@@ -2,24 +2,6 @@
# Makefile for the input core drivers.
#
# I-Force may need both USB and RS-232
CONFIG_JOYSTICK_IFORCE := n
ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
CONFIG_JOYSTICK_IFORCE := y
endif
endif
ifeq ($(CONFIG_JOYSTICK_IFORCE_232),m)
CONFIG_JOYSTICK_IFORCE := m
endif
ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),m)
CONFIG_JOYSTICK_IFORCE := m
endif
# Each configuration option enables a list of files.
obj-$(CONFIG_JOYSTICK_A3D) += a3d.o
......
drivers/input/joystick/iforce/Config.help 0 → 100644
View file @ a4e2c5d1
CONFIG_JOYSTICK_IFORCE
Say Y here if you have an I-Force joystick or steering wheel
You also must choose at least one of the two options below.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called iforce.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_JOYSTICK_IFORCE_USB
Say Y here if you have an I-Force joystick or steering wheel
connected to your USB port.
CONFIG_JOYSTICK_IFORCE_232
Say Y here if you have an I-Force joystick or steering wheel
connected to your serial (COM) port.
You will need an additional utility called inputattach, see
Documentation/input/joystick.txt and ff.txt.
drivers/input/joystick/iforce/Config.in 0 → 100644
View file @ a4e2c5d1
#
# I-Force driver configuration
#
dep_tristate ' I-Force devices' CONFIG_JOYSTICK_IFORCE $CONFIG_INPUT $CONFIG_INPUT_JOYSTICK
if [ "$CONFIG_JOYSTICK_IFORCE" = "m" -o "$CONFIG_JOYSTICK_IFORCE" = "y" ]; then
if [ "$CONFIG_JOYSTICK_IFORCE" = "m" -o "$CONFIG_USB" = "y" ]; then
dep_mbool ' I-Force USB joysticks and wheels' CONFIG_JOYSTICK_IFORCE_USB $CONFIG_USB
fi
if [ "$CONFIG_JOYSTICK_IFORCE" = "m" -o "$CONFIG_SERIO" = "y" ]; then
dep_mbool ' I-Force Serial joysticks and wheels' CONFIG_JOYSTICK_IFORCE_232 $CONFIG_SERIO
fi
fi
drivers/input/joystick/iforce/Makefile
View file @ a4e2c5d1
#
# Makefile for the I-Force driver
#
# By Johann Deneux <deneux@ifrance.com>
#
# I-Force may need both USB and RS-232
# Goal definition
list-multi := iforce.o
iforce-objs := iforce-ff.o iforce-main.o iforce-packets.o
CONFIG_JOYSTICK_IFORCE := n
obj-$(CONFIG_JOYSTICK_IFORCE) += iforce.o
ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
CONFIG_JOYSTICK_IFORCE := y
endif
iforce-objs += iforce-serio.o
endif
ifeq ($(CONFIG_JOYSTICK_IFORCE_232),m)
CONFIG_JOYSTICK_IFORCE := m
ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
iforce-objs += iforce-usb.o
endif
ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),m)
CONFIG_JOYSTICK_IFORCE := m
endif
obj-$(CONFIG_JOYSTICK_IFORCE) += iforce.o
EXTRA_CFLAGS = -Werror-implicit-function-declaration
# The global Rules.make.
include $(TOPDIR)/Rules.make
# iforce.o is a multipart module.
IFORCEOBJS = iforce-ff.o iforce-main.o iforce-packets.o
ifneq ($(CONFIG_JOYSTICK_IFORCE_232),)
IFORCEOBJS += iforce-serio.o
endif
ifneq ($(CONFIG_JOYSTICK_IFORCE_USB),)
IFORCEOBJS += iforce-usb.o
endif
# Additional rules
iforce.o: $(iforce-objs)
$(LD) -r -o $@ $(iforce-objs)
iforce.o: $(IFORCEOBJS)
$(LD) -i $(IFORCEOBJS) -o $@
drivers/input/joystick/iforce/iforce-main.c
View file @ a4e2c5d1
/*
* $Id: iforce-main.c,v 1.18 2002/06/09 11:03:03 jdeneux Exp $
* $Id: iforce-main.c,v 1.19 2002/07/07 10:22:50 jdeneux Exp $
*
* Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
* Copyright (c) 2001-2002 Johann Deneux <deneux@ifrance.com>
......@@ -248,7 +248,7 @@ static int iforce_open(struct input_dev *dev)
struct iforce *iforce = dev->private;
switch (iforce->bus) {
#ifdef IFORCE_USB
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
iforce->irq->dev = iforce->usbdev;
if (usb_submit_urb(iforce->irq, GFP_KERNEL))
......@@ -305,7 +305,7 @@ static void iforce_release(struct input_dev *dev)
iforce_send_packet(iforce, FF_CMD_ENABLE, "\001");
switch (iforce->bus) {
#ifdef IFORCE_USB
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
usb_unlink_urb(iforce->irq);
......@@ -323,12 +323,12 @@ static void iforce_release(struct input_dev *dev)
void iforce_delete_device(struct iforce *iforce)
{
switch (iforce->bus) {
#ifdef IFORCE_USB
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
iforce_usb_delete(iforce);
break;
#endif
#ifdef IFORCE_232
#ifdef CONFIG_JOYSTICK_IFORCE_232
case IFORCE_232:
//TODO: Wait for the last packets to be sent
break;
......@@ -520,10 +520,10 @@ int iforce_init_device(struct iforce *iforce)
static int __init iforce_init(void)
{
#ifdef IFORCE_USB
#ifdef CONFIG_JOYSTICK_IFORCE_USB
usb_register(&iforce_usb_driver);
#endif
#ifdef IFORCE_232
#ifdef CONFIG_JOYSTICK_IFORCE_232
serio_register_device(&iforce_serio_dev);
#endif
return 0;
......@@ -531,10 +531,10 @@ static int __init iforce_init(void)
static void __exit iforce_exit(void)
{
#ifdef IFORCE_USB
#ifdef CONFIG_JOYSTICK_IFORCE_USB
usb_deregister(&iforce_usb_driver);
#endif
#ifdef IFORCE_232
#ifdef CONFIG_JOYSTICK_IFORCE_232
serio_unregister_device(&iforce_serio_dev);
#endif
}
......
drivers/input/joystick/iforce/iforce-packets.c
View file @ a4e2c5d1
/*
* $Id: iforce-packets.c,v 1.15 2002/06/09 11:08:04 jdeneux Exp $
* $Id: iforce-packets.c,v 1.16 2002/07/07 10:22:50 jdeneux Exp $
*
* Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
* Copyright (c) 2001-2002 Johann Deneux <deneux@ifrance.com>
......@@ -101,13 +101,13 @@ int iforce_send_packet(struct iforce *iforce, u16 cmd, unsigned char* data)
*/
switch (iforce->bus) {
#ifdef IFORCE_232
#ifdef CONFIG_JOYSTICK_IFORCE_232
case IFORCE_232:
if (empty)
iforce_serial_xmit(iforce);
break;
#endif
#ifdef IFORCE_USB
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
if (iforce->usbdev && empty &&
......@@ -161,7 +161,7 @@ void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data)
printk(KERN_WARNING "iforce-packets.c: re-entrant call to iforce_process %d\n", being_used);
being_used++;
#ifdef IFORCE_232
#ifdef CONFIG_JOYSTICK_IFORCE_232
if (HI(iforce->expect_packet) == HI(cmd)) {
iforce->expect_packet = 0;
iforce->ecmd = cmd;
......@@ -251,7 +251,7 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet)
case IFORCE_USB:
#ifdef IFORCE_USB
#ifdef CONFIG_JOYSTICK_IFORCE_USB
iforce->cr.bRequest = packet[0];
iforce->ctrl->dev = iforce->usbdev;
......@@ -281,7 +281,7 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet)
case IFORCE_232:
#ifdef IFORCE_232
#ifdef CONFIG_JOYSTICK_IFORCE_232
iforce->expect_packet = FF_CMD_QUERY;
iforce_send_packet(iforce, FF_CMD_QUERY, packet);
......
drivers/input/joystick/iforce/iforce.h
View file @ a4e2c5d1
/*
* $Id: iforce.h,v 1.12 2002/06/09 11:08:04 jdeneux Exp $
* $Id: iforce.h,v 1.13 2002/07/07 10:22:50 jdeneux Exp $
*
* Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
* Copyright (c) 2001-2002 Johann Deneux <deneux@ifrance.com>
......@@ -39,7 +39,7 @@
#include <linux/circ_buf.h>
#include <asm/semaphore.h>
/* FF: This module provides arbitrary resource management routines.
/* This module provides arbitrary resource management routines.
* I use it to manage the device's memory.
* Despite the name of this module, I am *not* going to access the ioports.
*/
......@@ -47,12 +47,9 @@
#define IFORCE_MAX_LENGTH 16
#if defined(CONFIG_JOYSTICK_IFORCE_232)
/* iforce::bus */
#define IFORCE_232 1
#endif
#if defined(CONFIG_JOYSTICK_IFORCE_USB)
#define IFORCE_USB 2
#endif
#define FALSE 0
#define TRUE 1
......@@ -129,12 +126,12 @@ struct iforce {
u16 ecmd;
u16 expect_packet;
#ifdef IFORCE_232
#ifdef CONFIG_JOYSTICK_IFORCE_232
struct serio *serio; /* RS232 transfer */
int idx, pkt, len, id;
unsigned char csum;
#endif
#ifdef IFORCE_USB
#ifdef CONFIG_JOYSTICK_IFORCE_USB
struct usb_device *usbdev; /* USB transfer */
struct urb *irq, *out, *ctrl;
struct usb_ctrlrequest cr;
......
drivers/input/keyboard/Config.help
View file @ a4e2c5d1
......@@ -46,6 +46,14 @@ CONFIG_KEYBOARD_XTKBD
The module will be called xtkbd.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_KEYBOARD_NEWTON
Say Y here if you have a Newton keyboard on a serial port.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called maple_keyb.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_KEYBOARD_MAPLE
Say Y here if you have a DreamCast console running Linux and have
a keyboard attached to its Maple bus.
......
drivers/input/keyboard/Config.in
View file @ a4e2c5d1
......@@ -8,6 +8,7 @@ dep_tristate ' AT keyboard support' CONFIG_KEYBOARD_ATKBD $CONFIG_INPUT $CONFIG
dep_tristate ' Sun Type 4 and Type 5 keyboard support' CONFIG_KEYBOARD_SUNKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
dep_tristate ' PS/2 to Serial converter support' CONFIG_KEYBOARD_PS2SERKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
dep_tristate ' XT Keyboard support' CONFIG_KEYBOARD_XTKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
dep_tristate ' Newton keyboard' CONFIG_KEYBOARD_NEWTON $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
if [ "$CONFIG_SH_DREAMCAST" = "y" ]; then
dep_tristate ' Maple bus keyboard support' CONFIG_KEYBOARD_MAPLE $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_MAPLE
......
drivers/input/keyboard/Makefile
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/keyboard/atkbd.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/keyboard/newtonkbd.c 0 → 100644
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/mouse/amimouse.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/mouse/psmouse.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/mouse/rpcmouse.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/Config.in
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/Makefile
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/ct82c710.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/i8042-io.h 0 → 100644
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/i8042-ppcio.h 0 → 100644
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/i8042.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/i8042.h
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/parkbd.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/q40kbd.c 0 → 100644
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/rpckbd.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/serio.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/serio/serport.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/touchscreen/Config.help
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/touchscreen/Config.in
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/touchscreen/Makefile
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/touchscreen/h3600_ts_input.c 0 → 100644
View file @ a4e2c5d1
This diff is collapsed.
drivers/input/uinput.c 0 → 100644
View file @ a4e2c5d1
This diff is collapsed.
drivers/macintosh/adbhid.c
View file @ a4e2c5d1
This diff is collapsed.
drivers/macintosh/mac_hid.c
View file @ a4e2c5d1
This diff is collapsed.
include/asm-ppc/keyboard.h
View file @ a4e2c5d1
This diff is collapsed.
include/asm-ppc/machdep.h
View file @ a4e2c5d1
This diff is collapsed.
include/linux/gameport.h
View file @ a4e2c5d1
This diff is collapsed.
include/linux/input.h
View file @ a4e2c5d1
This diff is collapsed.
include/linux/serio.h
View file @ a4e2c5d1
This diff is collapsed.
include/linux/uinput.h 0 → 100644
View file @ a4e2c5d1
This diff is collapsed.
sound/oss/Config.in
View file @ a4e2c5d1
This diff is collapsed.
sound/oss/es1370.c
View file @ a4e2c5d1
This diff is collapsed.
sound/oss/es1371.c
View file @ a4e2c5d1
This diff is collapsed.
sound/oss/mad16.c
View file @ a4e2c5d1
This diff is collapsed.
sound/oss/trident.c
View file @ a4e2c5d1
This diff is collapsed.
sound/oss/trident.h
View file @ a4e2c5d1
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7