Commit a5247ca6 authored by Elaine Zhang's avatar Elaine Zhang Committed by Lee Jones

mfd: rk808: Add rk805 regs addr and ID

Signed-off-by: default avatarElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: default avatarJoseph Chen <chenjh@rock-chips.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 9d6105e1
...@@ -206,6 +206,97 @@ enum rk818_reg { ...@@ -206,6 +206,97 @@ enum rk818_reg {
#define RK818_USB_ILMIN_2000MA 0x7 #define RK818_USB_ILMIN_2000MA 0x7
#define RK818_USB_CHG_SD_VSEL_MASK 0x70 #define RK818_USB_CHG_SD_VSEL_MASK 0x70
/* RK805 */
enum rk805_reg {
RK805_ID_DCDC1,
RK805_ID_DCDC2,
RK805_ID_DCDC3,
RK805_ID_DCDC4,
RK805_ID_LDO1,
RK805_ID_LDO2,
RK805_ID_LDO3,
};
/* CONFIG REGISTER */
#define RK805_VB_MON_REG 0x21
#define RK805_THERMAL_REG 0x22
/* POWER CHANNELS ENABLE REGISTER */
#define RK805_DCDC_EN_REG 0x23
#define RK805_SLP_DCDC_EN_REG 0x25
#define RK805_SLP_LDO_EN_REG 0x26
#define RK805_LDO_EN_REG 0x27
/* BUCK AND LDO CONFIG REGISTER */
#define RK805_BUCK_LDO_SLP_LP_EN_REG 0x2A
#define RK805_BUCK1_CONFIG_REG 0x2E
#define RK805_BUCK1_ON_VSEL_REG 0x2F
#define RK805_BUCK1_SLP_VSEL_REG 0x30
#define RK805_BUCK2_CONFIG_REG 0x32
#define RK805_BUCK2_ON_VSEL_REG 0x33
#define RK805_BUCK2_SLP_VSEL_REG 0x34
#define RK805_BUCK3_CONFIG_REG 0x36
#define RK805_BUCK4_CONFIG_REG 0x37
#define RK805_BUCK4_ON_VSEL_REG 0x38
#define RK805_BUCK4_SLP_VSEL_REG 0x39
#define RK805_LDO1_ON_VSEL_REG 0x3B
#define RK805_LDO1_SLP_VSEL_REG 0x3C
#define RK805_LDO2_ON_VSEL_REG 0x3D
#define RK805_LDO2_SLP_VSEL_REG 0x3E
#define RK805_LDO3_ON_VSEL_REG 0x3F
#define RK805_LDO3_SLP_VSEL_REG 0x40
/* INTERRUPT REGISTER */
#define RK805_PWRON_LP_INT_TIME_REG 0x47
#define RK805_PWRON_DB_REG 0x48
#define RK805_DEV_CTRL_REG 0x4B
#define RK805_INT_STS_REG 0x4C
#define RK805_INT_STS_MSK_REG 0x4D
#define RK805_GPIO_IO_POL_REG 0x50
#define RK805_OUT_REG 0x52
#define RK805_ON_SOURCE_REG 0xAE
#define RK805_OFF_SOURCE_REG 0xAF
#define RK805_NUM_REGULATORS 7
#define RK805_PWRON_FALL_RISE_INT_EN 0x0
#define RK805_PWRON_FALL_RISE_INT_MSK 0x81
/* RK805 IRQ Definitions */
#define RK805_IRQ_PWRON_RISE 0
#define RK805_IRQ_VB_LOW 1
#define RK805_IRQ_PWRON 2
#define RK805_IRQ_PWRON_LP 3
#define RK805_IRQ_HOTDIE 4
#define RK805_IRQ_RTC_ALARM 5
#define RK805_IRQ_RTC_PERIOD 6
#define RK805_IRQ_PWRON_FALL 7
#define RK805_IRQ_PWRON_RISE_MSK BIT(0)
#define RK805_IRQ_VB_LOW_MSK BIT(1)
#define RK805_IRQ_PWRON_MSK BIT(2)
#define RK805_IRQ_PWRON_LP_MSK BIT(3)
#define RK805_IRQ_HOTDIE_MSK BIT(4)
#define RK805_IRQ_RTC_ALARM_MSK BIT(5)
#define RK805_IRQ_RTC_PERIOD_MSK BIT(6)
#define RK805_IRQ_PWRON_FALL_MSK BIT(7)
#define RK805_PWR_RISE_INT_STATUS BIT(0)
#define RK805_VB_LOW_INT_STATUS BIT(1)
#define RK805_PWRON_INT_STATUS BIT(2)
#define RK805_PWRON_LP_INT_STATUS BIT(3)
#define RK805_HOTDIE_INT_STATUS BIT(4)
#define RK805_ALARM_INT_STATUS BIT(5)
#define RK805_PERIOD_INT_STATUS BIT(6)
#define RK805_PWR_FALL_INT_STATUS BIT(7)
#define RK805_BUCK1_2_ILMAX_MASK (3 << 6)
#define RK805_BUCK3_4_ILMAX_MASK (3 << 3)
#define RK805_RTC_PERIOD_INT_MASK (1 << 6)
#define RK805_RTC_ALARM_INT_MASK (1 << 5)
#define RK805_INT_ALARM_EN (1 << 3)
#define RK805_INT_TIMER_EN (1 << 2)
/* RK808 IRQ Definitions */ /* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0 #define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1 #define RK808_IRQ_VB_LO 1
...@@ -298,7 +389,14 @@ enum rk818_reg { ...@@ -298,7 +389,14 @@ enum rk818_reg {
#define VOUT_LO_INT BIT(0) #define VOUT_LO_INT BIT(0)
#define CLK32KOUT2_EN BIT(0) #define CLK32KOUT2_EN BIT(0)
#define TEMP115C 0x0c
#define TEMP_HOTDIE_MSK 0x0c
#define SLP_SD_MSK (0x3 << 2)
#define SHUTDOWN_FUN (0x2 << 2)
#define SLEEP_FUN (0x1 << 2)
#define RK8XX_ID_MSK 0xfff0 #define RK8XX_ID_MSK 0xfff0
#define FPWM_MODE BIT(7)
enum { enum {
BUCK_ILMIN_50MA, BUCK_ILMIN_50MA,
BUCK_ILMIN_100MA, BUCK_ILMIN_100MA,
...@@ -322,6 +420,28 @@ enum { ...@@ -322,6 +420,28 @@ enum {
}; };
enum { enum {
RK805_BUCK1_2_ILMAX_2500MA,
RK805_BUCK1_2_ILMAX_3000MA,
RK805_BUCK1_2_ILMAX_3500MA,
RK805_BUCK1_2_ILMAX_4000MA,
};
enum {
RK805_BUCK3_ILMAX_1500MA,
RK805_BUCK3_ILMAX_2000MA,
RK805_BUCK3_ILMAX_2500MA,
RK805_BUCK3_ILMAX_3000MA,
};
enum {
RK805_BUCK4_ILMAX_2000MA,
RK805_BUCK4_ILMAX_2500MA,
RK805_BUCK4_ILMAX_3000MA,
RK805_BUCK4_ILMAX_3500MA,
};
enum {
RK805_ID = 0x8050,
RK808_ID = 0x0000, RK808_ID = 0x0000,
RK818_ID = 0x8181, RK818_ID = 0x8181,
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment