Merge tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "Here are the changes this time around, couple of new drivers and
  updates to few more:

   - New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC,
     Freescale dpaa2 qDMA

   - Support for X1000 in JZ4780

   - Xilinx dma updates and support for Xilinx AXI MCDM controller

   - New bindings for rcar R8A774B1

   - Minor updates to dw, dma-jz4780, ti-edma, sprd drivers"

* tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (61 commits)
  dmaengine: Fix Kconfig indentation
  dmaengine: sf-pdma: move macro to header file
  dmaengine: sf-pdma: replace /** with /* for non-function comment
  dmaengine: ti: edma: fix missed failure handling
  dmaengine: mmp_pdma: add missed of_dma_controller_free
  dmaengine: mmp_tdma: add missed of_dma_controller_free
  dmaengine: sprd: Add wrap address support for link-list mode
  MAINTAINERS: Add Green as SiFive PDMA driver maintainer
  dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00
  dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA
  dmaengine: zx: remove: removed dmam_pool_destroy
  dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails
  dmaengine: iop-adma: clean up an indentation issue
  dmaengine: milbeaut-xdmac: remove redundant error log
  dmaengine: milbeaut-hdmac: remove redundant error log
  dmaengine: dma-jz4780: add missed clk_disable_unprepare in remove
  dmaengine: JZ4780: Add support for the X1000.
  dt-bindings: dmaengine: Add X1000 bindings.
  dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support
  dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle
  ...

Documentation/devicetree/bindings/dma/dma-common.yaml

@@ -25,11 +25,18 @@ properties:
       Used to provide DMA controller specific information.
 
   dma-channel-mask:
-    $ref: /schemas/types.yaml#definitions/uint32
     description:
       Bitmask of available DMA channels in ascending order that are
       not reserved by firmware and are available to the
       kernel. i.e. first channel corresponds to LSB.
+      The first item in the array is for channels 0-31, the second is for
+      channels 32-63, etc.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 1
+      # Should be enough
+      maxItems: 255
 
   dma-channels:
     $ref: /schemas/types.yaml#definitions/uint32

Documentation/devicetree/bindings/dma/jz4780-dma.txt

@@ -7,10 +7,11 @@ Required properties:
   * ingenic,jz4725b-dma
   * ingenic,jz4770-dma
   * ingenic,jz4780-dma
+  * ingenic,x1000-dma
 - reg: Should contain the DMA channel registers location and length, followed
   by the DMA controller registers location and length.
 - interrupts: Should contain the interrupt specifier of the DMA controller.
-- clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
+- clocks: Should contain a clock specifier for the JZ4780/X1000 PDMA clock.
 - #dma-cells: Must be <2>. Number of integer cells in the dmas property of
   DMA clients (see below).
 

Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt

+* Milbeaut AHB DMA Controller
+
+Milbeaut AHB DMA controller has transfer capability below.
+ - device to memory transfer
+ - memory to device transfer
+
+Required property:
+- compatible:       Should be  "socionext,milbeaut-m10v-hdmac"
+- reg:              Should contain DMA registers location and length.
+- interrupts:       Should contain all of the per-channel DMA interrupts.
+                     Number of channels is configurable - 2, 4 or 8, so
+                     the number of interrupts specified should be {2,4,8}.
+- #dma-cells:       Should be 1. Specify the ID of the slave.
+- clocks:           Phandle to the clock used by the HDMAC module.
+
+
+Example:
+
+	hdmac1: dma-controller@1e110000 {
+		compatible = "socionext,milbeaut-m10v-hdmac";
+		reg = <0x1e110000 0x10000>;
+		interrupts = <0 132 4>,
+			     <0 133 4>,
+			     <0 134 4>,
+			     <0 135 4>,
+			     <0 136 4>,
+			     <0 137 4>,
+			     <0 138 4>,
+			     <0 139 4>;
+		#dma-cells = <1>;
+		clocks = <&dummy_clk>;
+	};

Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt

+* Milbeaut AXI DMA Controller
+
+Milbeaut AXI DMA controller has only memory to memory transfer capability.
+
+* DMA controller
+
+Required property:
+- compatible: 	Should be  "socionext,milbeaut-m10v-xdmac"
+- reg:		Should contain DMA registers location and length.
+- interrupts: 	Should contain all of the per-channel DMA interrupts.
+                Number of channels is configurable - 2, 4 or 8, so
+                the number of interrupts specified should be {2,4,8}.
+- #dma-cells: 	Should be 1.
+
+Example:
+	xdmac0: dma-controller@1c250000 {
+		compatible = "socionext,milbeaut-m10v-xdmac";
+		reg = <0x1c250000 0x1000>;
+		interrupts = <0 17 0x4>,
+			     <0 18 0x4>,
+			     <0 19 0x4>,
+			     <0 20 0x4>;
+		#dma-cells = <1>;
+	};

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -21,6 +21,7 @@ Required Properties:
 		- "renesas,dmac-r8a7745" (RZ/G1E)
 		- "renesas,dmac-r8a77470" (RZ/G1C)
 		- "renesas,dmac-r8a774a1" (RZ/G2M)
+		- "renesas,dmac-r8a774b1" (RZ/G2N)
 		- "renesas,dmac-r8a774c0" (RZ/G2E)
 		- "renesas,dmac-r8a7790" (R-Car H2)
 		- "renesas,dmac-r8a7791" (R-Car M2-W)

Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sifive,fu540-c000-pdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Unleashed Rev C000 Platform DMA
+
+maintainers:
+  - Green Wan <green.wan@sifive.com>
+  - Palmer Debbelt <palmer@sifive.com>
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+description: |
+  Platform DMA is a DMA engine of SiFive Unleashed. It supports 4
+  channels. Each channel has 2 interrupts. One is for DMA done and
+  the other is for DME error.
+
+  In different SoC, DMA could be attached to different IRQ line.
+  DT file need to be changed to meet the difference. For technical
+  doc,
+
+  https://static.dev.sifive.com/FU540-C000-v1.0.pdf
+
+properties:
+  compatible:
+    items:
+      - const: sifive,fu540-c000-pdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#dma-cells'
+
+examples:
+  - |
+    dma@3000000 {
+      compatible = "sifive,fu540-c000-pdma";
+      reg = <0x0 0x3000000 0x0 0x8000>;
+      interrupts = <23 24 25 26 27 28 29 30>;
+      #dma-cells = <1>;
+    };
+
+...

Documentation/devicetree/bindings/dma/ti-edma.txt

@@ -42,6 +42,11 @@ Optional properties:
 - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
 		the driver, they are allocated to be used by for example the
 		DSP. See example.
+- dma-channel-mask: Mask of usable channels.
+		Single uint32 for EDMA with 32 channels, array of two uint32 for
+		EDMA with 64 channels. See example and
+		Documentation/devicetree/bindings/dma/dma-common.yaml
+
 
 ------------------------------------------------------------------------------
 eDMA3 Transfer Controller
@@ -91,6 +96,9 @@ edma: edma@49000000 {
 	ti,edma-memcpy-channels = <20 21>;
 	/* The following PaRAM slots are reserved: 35-44 and 100-109 */
 	ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
+	/* The following channels are reserved: 35-44 */
+	dma-channel-mask = <0xffffffff /* Channel 0-31 */
+			    0xffffe007>; /* Channel 32-63 */
 };
 
 edma_tptc0: tptc@49800000 {

Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt

@@ -11,9 +11,16 @@ is to receive from the device.
 Xilinx AXI CDMA engine, it does transfers between memory-mapped source
 address and a memory-mapped destination address.
 
+Xilinx AXI MCDMA engine, it does transfer between memory and AXI4 stream
+target devices. It can be configured to have up to 16 independent transmit
+and receive channels.
+
 Required properties:
-- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
-	      "xlnx,axi-cdma-1.00.a""
+- compatible: Should be one of-
+		"xlnx,axi-vdma-1.00.a"
+		"xlnx,axi-dma-1.00.a"
+		"xlnx,axi-cdma-1.00.a"
+		"xlnx,axi-mcdma-1.00.a"
 - #dma-cells: Should be <1>, see "dmas" property below
 - reg: Should contain VDMA registers location and length.
 - xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
@@ -29,7 +36,7 @@ Required properties:
 			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
 	For CDMA:
 	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
-	FOR AXIDMA:
+	For AXIDMA and MCDMA:
 	Required elements: "s_axi_lite_aclk"
 	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
 			   "m_axi_sg_aclk"
@@ -37,12 +44,11 @@ Required properties:
 Required properties for VDMA:
 - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
 
-Optional properties for AXI DMA:
+Optional properties for AXI DMA and MCDMA:
 - xlnx,sg-length-width: Should be set to the width in bits of the length
 	register as configured in h/w. Takes values {8...26}. If the property
 	is missing or invalid then the default value 23 is used. This is the
 	maximum value that is supported by all IP versions.
-- xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware.
 Optional properties for VDMA:
 - xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
 	It takes following values:
@@ -55,8 +61,8 @@ Required child node properties:
 	For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or
 	"xlnx,axi-vdma-s2mm-channel".
 	For CDMA: It should be "xlnx,axi-cdma-channel".
-	For AXIDMA: It should be either "xlnx,axi-dma-mm2s-channel" or
-	"xlnx,axi-dma-s2mm-channel".
+	For AXIDMA and MCDMA: It should be either "xlnx,axi-dma-mm2s-channel"
+	or "xlnx,axi-dma-s2mm-channel".
 - interrupts: Should contain per channel VDMA interrupts.
 - xlnx,datawidth: Should contain the stream data width, take values
 	{32,64...1024}.
@@ -69,8 +75,8 @@ Optional child node properties for VDMA:
 	enabled/disabled in hardware.
 - xlnx,enable-vert-flip: Tells vertical flip is
 	enabled/disabled in hardware(S2MM path).
-Optional child node properties for AXI DMA:
--dma-channels: Number of dma channels in child node.
+Optional child node properties for MCDMA:
+- dma-channels: Number of dma channels in child node.
 
 Example:
 ++++++++

MAINTAINERS

@@ -14953,6 +14953,12 @@ F:	drivers/media/usb/siano/
 F:	drivers/media/usb/siano/
 F:	drivers/media/mmc/siano/
 
+SIFIVE PDMA DRIVER
+M:	Green Wan <green.wan@sifive.com>
+S:	Maintained
+F:	drivers/dma/sf-pdma/
+F:	Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+
 SIFIVE DRIVERS
 M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Paul Walmsley <paul.walmsley@sifive.com>

drivers/dma/Kconfig

@@ -342,6 +342,26 @@ config MCF_EDMA
 	  minimal intervention from a host processor.
 	  This module can be found on Freescale ColdFire mcf5441x SoCs.
 
+config MILBEAUT_HDMAC
+	tristate "Milbeaut AHB DMA support"
+	depends on ARCH_MILBEAUT || COMPILE_TEST
+	depends on OF
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Say yes here to support the Socionext Milbeaut
+	  HDMAC device.
+
+config MILBEAUT_XDMAC
+	tristate "Milbeaut AXI DMA support"
+	depends on ARCH_MILBEAUT || COMPILE_TEST
+	depends on OF
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Say yes here to support the Socionext Milbeaut
+	  XDMAC device.
+
 config MMP_PDMA
 	bool "MMP PDMA support"
 	depends on ARCH_MMP || ARCH_PXA || COMPILE_TEST
@@ -635,6 +655,10 @@ config XILINX_DMA
 	  destination address.
 	  AXI DMA engine provides high-bandwidth one dimensional direct
 	  memory access between memory and AXI4-Stream target peripherals.
+	  AXI MCDMA engine provides high-bandwidth direct memory access
+	  between memory and AXI4-Stream target peripherals. It provides
+	  the scatter gather interface with multiple channels independent
+	  configuration support.
 
 config XILINX_ZYNQMP_DMA
 	tristate "Xilinx ZynqMP DMA Engine"
@@ -665,10 +689,14 @@ source "drivers/dma/dw-edma/Kconfig"
 
 source "drivers/dma/hsu/Kconfig"
 
+source "drivers/dma/sf-pdma/Kconfig"
+
 source "drivers/dma/sh/Kconfig"
 
 source "drivers/dma/ti/Kconfig"
 
+source "drivers/dma/fsl-dpaa2-qdma/Kconfig"
+
 # clients
 comment "DMA Clients"
 	depends on DMA_ENGINE

drivers/dma/Makefile

@@ -45,6 +45,8 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
 obj-$(CONFIG_K3_DMA) += k3dma.o
 obj-$(CONFIG_LPC18XX_DMAMUX) += lpc18xx-dmamux.o
+obj-$(CONFIG_MILBEAUT_HDMAC) += milbeaut-hdmac.o
+obj-$(CONFIG_MILBEAUT_XDMAC) += milbeaut-xdmac.o
 obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
 obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
 obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
@@ -60,6 +62,7 @@ obj-$(CONFIG_PL330_DMA) += pl330.o
 obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_PXA_DMA) += pxa_dma.o
 obj-$(CONFIG_RENESAS_DMA) += sh/
+obj-$(CONFIG_SF_PDMA) += sf-pdma/
 obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_STM32_DMA) += stm32-dma.o
@@ -75,6 +78,7 @@ obj-$(CONFIG_UNIPHIER_MDMAC) += uniphier-mdmac.o
 obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
 obj-$(CONFIG_ZX_DMA) += zx_dma.o
 obj-$(CONFIG_ST_FDMA) += st_fdma.o
+obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/
 
 obj-y += mediatek/
 obj-y += qcom/

drivers/dma/at_xdmac.c

@@ -1957,21 +1957,16 @@ static int atmel_xdmac_resume(struct device *dev)
 
 static int at_xdmac_probe(struct platform_device *pdev)
 {
-	struct resource	*res;
 	struct at_xdmac	*atxdmac;
 	int		irq, size, nr_channels, i, ret;
 	void __iomem	*base;
 	u32		reg;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -EINVAL;
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 

drivers/dma/dma-jz4780.c

@@ -858,13 +858,7 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 	jzdma->soc_data = soc_data;
 	platform_set_drvdata(pdev, jzdma);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "failed to get I/O memory\n");
-		return -EINVAL;
-	}
-
-	jzdma->chn_base = devm_ioremap_resource(dev, res);
+	jzdma->chn_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(jzdma->chn_base))
 		return PTR_ERR(jzdma->chn_base);
 
@@ -987,6 +981,7 @@ static int jz4780_dma_remove(struct platform_device *pdev)
 
 	of_dma_controller_free(pdev->dev.of_node);
 
+	clk_disable_unprepare(jzdma->clk);
 	free_irq(jzdma->irq, jzdma);
 
 	for (i = 0; i < jzdma->soc_data->nb_channels; i++)
@@ -1019,11 +1014,18 @@ static const struct jz4780_dma_soc_data jz4780_dma_soc_data = {
 	.flags = JZ_SOC_DATA_ALLOW_LEGACY_DT | JZ_SOC_DATA_PROGRAMMABLE_DMA,
 };
 
+static const struct jz4780_dma_soc_data x1000_dma_soc_data = {
+	.nb_channels = 8,
+	.transfer_ord_max = 7,
+	.flags = JZ_SOC_DATA_PROGRAMMABLE_DMA,
+};
+
 static const struct of_device_id jz4780_dma_dt_match[] = {
 	{ .compatible = "ingenic,jz4740-dma", .data = &jz4740_dma_soc_data },
 	{ .compatible = "ingenic,jz4725b-dma", .data = &jz4725b_dma_soc_data },
 	{ .compatible = "ingenic,jz4770-dma", .data = &jz4770_dma_soc_data },
 	{ .compatible = "ingenic,jz4780-dma", .data = &jz4780_dma_soc_data },
+	{ .compatible = "ingenic,x1000-dma", .data = &x1000_dma_soc_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, jz4780_dma_dt_match);

drivers/dma/dw/platform.c

@@ -66,7 +66,7 @@ static int dw_probe(struct platform_device *pdev)
 
 	data->chip = chip;
 
-	chip->clk = devm_clk_get(chip->dev, "hclk");
+	chip->clk = devm_clk_get_optional(chip->dev, "hclk");
 	if (IS_ERR(chip->clk))
 		return PTR_ERR(chip->clk);
 	err = clk_prepare_enable(chip->clk);

drivers/dma/fsl-dpaa2-qdma/Kconfig

+menuconfig FSL_DPAA2_QDMA
+	tristate "NXP DPAA2 QDMA"
+	depends on ARM64
+	depends on FSL_MC_BUS && FSL_MC_DPIO
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  NXP Data Path Acceleration Architecture 2 QDMA driver,
+	  using the NXP MC bus driver.

drivers/dma/fsl-dpaa2-qdma/Makefile

+# SPDX-License-Identifier: GPL-2.0
+# Makefile for the NXP DPAA2 qDMA controllers
+obj-$(CONFIG_FSL_DPAA2_QDMA) += dpaa2-qdma.o dpdmai.o

drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright 2019 NXP */
+
+#ifndef __DPAA2_QDMA_H
+#define __DPAA2_QDMA_H
+
+#define DPAA2_QDMA_STORE_SIZE 16
+#define NUM_CH 8
+
+struct dpaa2_qdma_sd_d {
+	u32 rsv:32;
+	union {
+		struct {
+			u32 ssd:12; /* souce stride distance */
+			u32 sss:12; /* souce stride size */
+			u32 rsv1:8;
+		} sdf;
+		struct {
+			u32 dsd:12; /* Destination stride distance */
+			u32 dss:12; /* Destination stride size */
+			u32 rsv2:8;
+		} ddf;
+	} df;
+	u32 rbpcmd;	/* Route-by-port command */
+	u32 cmd;
+} __attribute__((__packed__));
+
+/* Source descriptor command read transaction type for RBP=0: */
+/* coherent copy of cacheable memory */
+#define QDMA_SD_CMD_RDTTYPE_COHERENT (0xb << 28)
+/* Destination descriptor command write transaction type for RBP=0: */
+/* coherent copy of cacheable memory */
+#define QDMA_DD_CMD_WRTTYPE_COHERENT (0x6 << 28)
+#define LX2160_QDMA_DD_CMD_WRTTYPE_COHERENT (0xb << 28)
+
+#define QMAN_FD_FMT_ENABLE	BIT(0) /* frame list table enable */
+#define QMAN_FD_BMT_ENABLE	BIT(15) /* bypass memory translation */
+#define QMAN_FD_BMT_DISABLE	(0) /* bypass memory translation */
+#define QMAN_FD_SL_DISABLE	(0) /* short lengthe disabled */
+#define QMAN_FD_SL_ENABLE	BIT(14) /* short lengthe enabled */
+
+#define QDMA_FINAL_BIT_DISABLE	(0) /* final bit disable */
+#define QDMA_FINAL_BIT_ENABLE	BIT(31) /* final bit enable */
+
+#define QDMA_FD_SHORT_FORMAT	BIT(11) /* short format */
+#define QDMA_FD_LONG_FORMAT	(0) /* long format */
+#define QDMA_SER_DISABLE	(8) /* no notification */
+#define QDMA_SER_CTX		BIT(8) /* notification by FQD_CTX[fqid] */
+#define QDMA_SER_DEST		(2 << 8) /* notification by destination desc */
+#define QDMA_SER_BOTH		(3 << 8) /* soruce and dest notification */
+#define QDMA_FD_SPF_ENALBE	BIT(30) /* source prefetch enable */
+
+#define QMAN_FD_VA_ENABLE	BIT(14) /* Address used is virtual address */
+#define QMAN_FD_VA_DISABLE	(0)/* Address used is a real address */
+/* Flow Context: 49bit physical address */
+#define QMAN_FD_CBMT_ENABLE	BIT(15)
+#define QMAN_FD_CBMT_DISABLE	(0) /* Flow Context: 64bit virtual address */
+#define QMAN_FD_SC_DISABLE	(0) /* stashing control */
+
+#define QDMA_FL_FMT_SBF		(0x0) /* Single buffer frame */
+#define QDMA_FL_FMT_SGE		(0x2) /* Scatter gather frame */
+#define QDMA_FL_BMT_ENABLE	BIT(15) /* enable bypass memory translation */
+#define QDMA_FL_BMT_DISABLE	(0x0) /* enable bypass memory translation */
+#define QDMA_FL_SL_LONG		(0x0)/* long length */
+#define QDMA_FL_SL_SHORT	(0x1) /* short length */
+#define QDMA_FL_F		(0x1)/* last frame list bit */
+
+/*Description of Frame list table structure*/
+struct dpaa2_qdma_chan {
+	struct dpaa2_qdma_engine	*qdma;
+	struct virt_dma_chan		vchan;
+	struct virt_dma_desc		vdesc;
+	enum dma_status			status;
+	u32				fqid;
+
+	/* spinlock used by dpaa2 qdma driver */
+	spinlock_t			queue_lock;
+	struct dma_pool			*fd_pool;
+	struct dma_pool			*fl_pool;
+	struct dma_pool			*sdd_pool;
+
+	struct list_head		comp_used;
+	struct list_head		comp_free;
+
+};
+
+struct dpaa2_qdma_comp {
+	dma_addr_t		fd_bus_addr;
+	dma_addr_t		fl_bus_addr;
+	dma_addr_t		desc_bus_addr;
+	struct dpaa2_fd		*fd_virt_addr;
+	struct dpaa2_fl_entry	*fl_virt_addr;
+	struct dpaa2_qdma_sd_d	*desc_virt_addr;
+	struct dpaa2_qdma_chan	*qchan;
+	struct virt_dma_desc	vdesc;
+	struct list_head	list;
+};
+
+struct dpaa2_qdma_engine {
+	struct dma_device	dma_dev;
+	u32			n_chans;
+	struct dpaa2_qdma_chan	chans[NUM_CH];
+	int			qdma_wrtype_fixup;
+	int			desc_allocated;
+
+	struct dpaa2_qdma_priv *priv;
+};
+
+/*
+ * dpaa2_qdma_priv - driver private data
+ */
+struct dpaa2_qdma_priv {
+	int dpqdma_id;
+
+	struct iommu_domain	*iommu_domain;
+	struct dpdmai_attr	dpdmai_attr;
+	struct device		*dev;
+	struct fsl_mc_io	*mc_io;
+	struct fsl_mc_device	*dpdmai_dev;
+	u8			num_pairs;
+
+	struct dpaa2_qdma_engine	*dpaa2_qdma;
+	struct dpaa2_qdma_priv_per_prio	*ppriv;
+
+	struct dpdmai_rx_queue_attr rx_queue_attr[DPDMAI_PRIO_NUM];
+	u32 tx_fqid[DPDMAI_PRIO_NUM];
+};
+
+struct dpaa2_qdma_priv_per_prio {
+	int req_fqid;
+	int rsp_fqid;
+	int prio;
+
+	struct dpaa2_io_store *store;
+	struct dpaa2_io_notification_ctx nctx;
+
+	struct dpaa2_qdma_priv *priv;
+};
+
+static struct soc_device_attribute soc_fixup_tuning[] = {
+	{ .family = "QorIQ LX2160A"},
+	{ },
+};
+
+/* FD pool size: one FD + 3 Frame list + 2 source/destination descriptor */
+#define FD_POOL_SIZE (sizeof(struct dpaa2_fd) + \
+		sizeof(struct dpaa2_fl_entry) * 3 + \
+		sizeof(struct dpaa2_qdma_sd_d) * 2)
+
+static void dpaa2_dpdmai_free_channels(struct dpaa2_qdma_engine *dpaa2_qdma);
+static void dpaa2_dpdmai_free_comp(struct dpaa2_qdma_chan *qchan,
+				   struct list_head *head);
+#endif /* __DPAA2_QDMA_H */

drivers/dma/fsl-dpaa2-qdma/dpdmai.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright 2019 NXP */
+
+#ifndef __FSL_DPDMAI_H
+#define __FSL_DPDMAI_H
+
+/* DPDMAI Version */
+#define DPDMAI_VER_MAJOR	2
+#define DPDMAI_VER_MINOR	2
+
+#define DPDMAI_CMD_BASE_VERSION	0
+#define DPDMAI_CMD_ID_OFFSET	4
+
+#define DPDMAI_CMDID_FORMAT(x)	(((x) << DPDMAI_CMD_ID_OFFSET) | \
+				DPDMAI_CMD_BASE_VERSION)
+
+/* Command IDs */
+#define DPDMAI_CMDID_CLOSE		DPDMAI_CMDID_FORMAT(0x800)
+#define DPDMAI_CMDID_OPEN               DPDMAI_CMDID_FORMAT(0x80E)
+#define DPDMAI_CMDID_CREATE             DPDMAI_CMDID_FORMAT(0x90E)
+
+#define DPDMAI_CMDID_ENABLE             DPDMAI_CMDID_FORMAT(0x002)
+#define DPDMAI_CMDID_DISABLE            DPDMAI_CMDID_FORMAT(0x003)
+#define DPDMAI_CMDID_GET_ATTR           DPDMAI_CMDID_FORMAT(0x004)
+#define DPDMAI_CMDID_RESET              DPDMAI_CMDID_FORMAT(0x005)
+#define DPDMAI_CMDID_IS_ENABLED         DPDMAI_CMDID_FORMAT(0x006)
+
+#define DPDMAI_CMDID_SET_IRQ            DPDMAI_CMDID_FORMAT(0x010)
+#define DPDMAI_CMDID_GET_IRQ            DPDMAI_CMDID_FORMAT(0x011)
+#define DPDMAI_CMDID_SET_IRQ_ENABLE     DPDMAI_CMDID_FORMAT(0x012)
+#define DPDMAI_CMDID_GET_IRQ_ENABLE     DPDMAI_CMDID_FORMAT(0x013)
+#define DPDMAI_CMDID_SET_IRQ_MASK       DPDMAI_CMDID_FORMAT(0x014)
+#define DPDMAI_CMDID_GET_IRQ_MASK       DPDMAI_CMDID_FORMAT(0x015)
+#define DPDMAI_CMDID_GET_IRQ_STATUS     DPDMAI_CMDID_FORMAT(0x016)
+#define DPDMAI_CMDID_CLEAR_IRQ_STATUS	DPDMAI_CMDID_FORMAT(0x017)
+
+#define DPDMAI_CMDID_SET_RX_QUEUE	DPDMAI_CMDID_FORMAT(0x1A0)
+#define DPDMAI_CMDID_GET_RX_QUEUE       DPDMAI_CMDID_FORMAT(0x1A1)
+#define DPDMAI_CMDID_GET_TX_QUEUE       DPDMAI_CMDID_FORMAT(0x1A2)
+
+#define MC_CMD_HDR_TOKEN_O 32  /* Token field offset */
+#define MC_CMD_HDR_TOKEN_S 16  /* Token field size */
+
+#define MAKE_UMASK64(_width) \
+	((u64)((_width) < 64 ? ((u64)1 << (_width)) - 1 : (u64)-1))
+
+/* Data Path DMA Interface API
+ * Contains initialization APIs and runtime control APIs for DPDMAI
+ */
+
+/**
+ * Maximum number of Tx/Rx priorities per DPDMAI object
+ */
+#define DPDMAI_PRIO_NUM		2
+
+/* DPDMAI queue modification options */
+
+/**
+ * Select to modify the user's context associated with the queue
+ */
+#define DPDMAI_QUEUE_OPT_USER_CTX	0x1
+
+/**
+ * Select to modify the queue's destination
+ */
+#define DPDMAI_QUEUE_OPT_DEST		0x2
+
+/**
+ * struct dpdmai_cfg - Structure representing DPDMAI configuration
+ * @priorities: Priorities for the DMA hardware processing; valid priorities are
+ *	configured with values 1-8; the entry following last valid entry
+ *	should be configured with 0
+ */
+struct dpdmai_cfg {
+	u8 priorities[DPDMAI_PRIO_NUM];
+};
+
+/**
+ * struct dpdmai_attr - Structure representing DPDMAI attributes
+ * @id: DPDMAI object ID
+ * @version: DPDMAI version
+ * @num_of_priorities: number of priorities
+ */
+struct dpdmai_attr {
+	int	id;
+	/**
+	 * struct version - DPDMAI version
+	 * @major: DPDMAI major version
+	 * @minor: DPDMAI minor version
+	 */
+	struct {
+		u16 major;
+		u16 minor;
+	} version;
+	u8 num_of_priorities;
+};
+
+/**
+ * enum dpdmai_dest - DPDMAI destination types
+ * @DPDMAI_DEST_NONE: Unassigned destination; The queue is set in parked mode
+ *	and does not generate FQDAN notifications; user is expected to dequeue
+ *	from the queue based on polling or other user-defined method
+ * @DPDMAI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
+ *	notifications to the specified DPIO; user is expected to dequeue
+ *	from the queue only after notification is received
+ * @DPDMAI_DEST_DPCON: The queue is set in schedule mode and does not generate
+ *	FQDAN notifications, but is connected to the specified DPCON object;
+ *	user is expected to dequeue from the DPCON channel
+ */
+enum dpdmai_dest {
+	DPDMAI_DEST_NONE = 0,
+	DPDMAI_DEST_DPIO = 1,
+	DPDMAI_DEST_DPCON = 2
+};
+
+/**
+ * struct dpdmai_dest_cfg - Structure representing DPDMAI destination parameters
+ * @dest_type: Destination type
+ * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type
+ * @priority: Priority selection within the DPIO or DPCON channel; valid values
+ *	are 0-1 or 0-7, depending on the number of priorities in that
+ *	channel; not relevant for 'DPDMAI_DEST_NONE' option
+ */
+struct dpdmai_dest_cfg {
+	enum dpdmai_dest dest_type;
+	int dest_id;
+	u8 priority;
+};
+
+/**
+ * struct dpdmai_rx_queue_cfg - DPDMAI RX queue configuration
+ * @options: Flags representing the suggested modifications to the queue;
+ *	Use any combination of 'DPDMAI_QUEUE_OPT_<X>' flags
+ * @user_ctx: User context value provided in the frame descriptor of each
+ *	dequeued frame;
+ *	valid only if 'DPDMAI_QUEUE_OPT_USER_CTX' is contained in 'options'
+ * @dest_cfg: Queue destination parameters;
+ *	valid only if 'DPDMAI_QUEUE_OPT_DEST' is contained in 'options'
+ */
+struct dpdmai_rx_queue_cfg {
+	struct dpdmai_dest_cfg dest_cfg;
+	u32 options;
+	u64 user_ctx;
+
+};
+
+/**
+ * struct dpdmai_rx_queue_attr - Structure representing attributes of Rx queues
+ * @user_ctx:  User context value provided in the frame descriptor of each
+ *	 dequeued frame
+ * @dest_cfg: Queue destination configuration
+ * @fqid: Virtual FQID value to be used for dequeue operations
+ */
+struct dpdmai_rx_queue_attr {
+	struct dpdmai_dest_cfg	dest_cfg;
+	u64 user_ctx;
+	u32 fqid;
+};
+
+int dpdmai_open(struct fsl_mc_io *mc_io, u32 cmd_flags,
+		int dpdmai_id, u16 *token);
+int dpdmai_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+int dpdmai_create(struct fsl_mc_io *mc_io, u32 cmd_flags,
+		  const struct dpdmai_cfg *cfg, u16 *token);
+int dpdmai_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+int dpdmai_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+int dpdmai_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+int dpdmai_get_attributes(struct fsl_mc_io *mc_io, u32 cmd_flags,
+			  u16 token, struct dpdmai_attr	*attr);
+int dpdmai_set_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
+			u8 priority, const struct dpdmai_rx_queue_cfg *cfg);
+int dpdmai_get_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
+			u8 priority, struct dpdmai_rx_queue_attr *attr);
+int dpdmai_get_tx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags,
+			u16 token, u8 priority, u32 *fqid);
+
+#endif /* __FSL_DPDMAI_H */

drivers/dma/fsl-qdma.c

@@ -1155,6 +1155,9 @@ static int fsl_qdma_probe(struct platform_device *pdev)
 		return ret;
 
 	fsl_qdma->irq_base = platform_get_irq_byname(pdev, "qdma-queue0");
+	if (fsl_qdma->irq_base < 0)
+		return fsl_qdma->irq_base;
+
 	fsl_qdma->feature = of_property_read_bool(np, "big-endian");
 	INIT_LIST_HEAD(&fsl_qdma->dma_dev.channels);
 

drivers/dma/iop-adma.c

@@ -1359,9 +1359,11 @@ static int iop_adma_probe(struct platform_device *pdev)
 	iop_adma_device_clear_err_status(iop_chan);
 
 	for (i = 0; i < 3; i++) {
-		irq_handler_t handler[] = { iop_adma_eot_handler,
+		static const irq_handler_t handler[] = {
+			iop_adma_eot_handler,
 			iop_adma_eoc_handler,
-					iop_adma_err_handler };
+			iop_adma_err_handler
+		};
 		int irq = platform_get_irq(pdev, i);
 		if (irq < 0) {
 			ret = -ENXIO;

drivers/dma/k3dma.c

@@ -835,13 +835,8 @@ static int k3_dma_probe(struct platform_device *op)
 	const struct k3dma_soc_data *soc_data;
 	struct k3_dma_dev *d;
 	const struct of_device_id *of_id;
-	struct resource *iores;
 	int i, ret, irq = 0;
 
-	iores = platform_get_resource(op, IORESOURCE_MEM, 0);
-	if (!iores)
-		return -EINVAL;
-
 	d = devm_kzalloc(&op->dev, sizeof(*d), GFP_KERNEL);
 	if (!d)
 		return -ENOMEM;
@@ -850,7 +845,7 @@ static int k3_dma_probe(struct platform_device *op)
 	if (!soc_data)
 		return -EINVAL;
 
-	d->base = devm_ioremap_resource(&op->dev, iores);
+	d->base = devm_platform_ioremap_resource(op, 0);
 	if (IS_ERR(d->base))
 		return PTR_ERR(d->base);
 

drivers/dma/mediatek/mtk-cqdma.c

@@ -819,15 +819,7 @@ static int mtk_cqdma_probe(struct platform_device *pdev)
 		INIT_LIST_HEAD(&cqdma->pc[i]->queue);
 		spin_lock_init(&cqdma->pc[i]->lock);
 		refcount_set(&cqdma->pc[i]->refcnt, 0);
-
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res) {
-			dev_err(&pdev->dev, "No mem resource for %s\n",
-				dev_name(&pdev->dev));
-			return -EINVAL;
-		}
-
-		cqdma->pc[i]->base = devm_ioremap_resource(&pdev->dev, res);
+		cqdma->pc[i]->base = devm_platform_ioremap_resource(pdev, i);
 		if (IS_ERR(cqdma->pc[i]->base))
 			return PTR_ERR(cqdma->pc[i]->base);
 

drivers/dma/mediatek/mtk-hsdma.c

@@ -997,7 +997,7 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(&pdev->dev,
 			"request_irq failed with err %d\n", err);
-		goto err_unregister;
+		goto err_free;
 	}
 
 	platform_set_drvdata(pdev, hsdma);
@@ -1006,6 +1006,8 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_free:
+	of_dma_controller_free(pdev->dev.of_node);
 err_unregister:
 	dma_async_device_unregister(dd);
 

drivers/dma/mediatek/mtk-uart-apdma.c

@@ -475,7 +475,6 @@ static int mtk_uart_apdma_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct mtk_uart_apdmadev *mtkd;
 	int bit_mask = 32, rc;
-	struct resource *res;
 	struct mtk_chan *c;
 	unsigned int i;
 
@@ -532,13 +531,7 @@ static int mtk_uart_apdma_probe(struct platform_device *pdev)
 			goto err_no_dma;
 		}
 
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res) {
-			rc = -ENODEV;
-			goto err_no_dma;
-		}
-
-		c->base = devm_ioremap_resource(&pdev->dev, res);
+		c->base = devm_platform_ioremap_resource(pdev, i);
 		if (IS_ERR(c->base)) {
 			rc = PTR_ERR(c->base);
 			goto err_no_dma;

drivers/dma/mmp_pdma.c

@@ -945,6 +945,8 @@ static int mmp_pdma_remove(struct platform_device *op)
 	struct mmp_pdma_phy *phy;
 	int i, irq = 0, irq_num = 0;
 
+	if (op->dev.of_node)
+		of_dma_controller_free(op->dev.of_node);
 
 	for (i = 0; i < pdev->dma_channels; i++) {
 		if (platform_get_irq(op, i) > 0)

drivers/dma/mmp_tdma.c

@@ -544,6 +544,9 @@ static void mmp_tdma_issue_pending(struct dma_chan *chan)
 
 static int mmp_tdma_remove(struct platform_device *pdev)
 {
+	if (pdev->dev.of_node)
+		of_dma_controller_free(pdev->dev.of_node);
+
 	return 0;
 }
 

drivers/dma/owl-dma.c

@@ -1045,18 +1045,13 @@ static int owl_dma_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct owl_dma *od;
-	struct resource *res;
 	int ret, i, nr_channels, nr_requests;
 
 	od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
 	if (!od)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -EINVAL;
-
-	od->base = devm_ioremap_resource(&pdev->dev, res);
+	od->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(od->base))
 		return PTR_ERR(od->base);
 

drivers/dma/sf-pdma/Kconfig

+config SF_PDMA
+	tristate "Sifive PDMA controller driver"
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Support the SiFive PDMA controller.

drivers/dma/sf-pdma/Makefile

+obj-$(CONFIG_SF_PDMA)   += sf-pdma.o

drivers/dma/sf-pdma/sf-pdma.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SiFive FU540 Platform DMA driver
+ * Copyright (C) 2019 SiFive
+ *
+ * Based partially on:
+ * - drivers/dma/fsl-edma.c
+ * - drivers/dma/dw-edma/
+ * - drivers/dma/pxa-dma.c
+ *
+ * See the following sources for further documentation:
+ * - Chapter 12 "Platform DMA Engine (PDMA)" of
+ *   SiFive FU540-C000 v1.0
+ *   https://static.dev.sifive.com/FU540-C000-v1.0.pdf
+ */
+#ifndef _SF_PDMA_H
+#define _SF_PDMA_H
+
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+
+#include "../dmaengine.h"
+#include "../virt-dma.h"
+
+#define PDMA_NR_CH					4
+
+#if (PDMA_NR_CH != 4)
+#error "Please define PDMA_NR_CH to 4"
+#endif
+
+#define PDMA_BASE_ADDR					0x3000000
+#define PDMA_CHAN_OFFSET				0x1000
+
+/* Register Offset */
+#define PDMA_CTRL					0x000
+#define PDMA_XFER_TYPE					0x004
+#define PDMA_XFER_SIZE					0x008
+#define PDMA_DST_ADDR					0x010
+#define PDMA_SRC_ADDR					0x018
+#define PDMA_ACT_TYPE					0x104 /* Read-only */
+#define PDMA_REMAINING_BYTE				0x108 /* Read-only */
+#define PDMA_CUR_DST_ADDR				0x110 /* Read-only*/
+#define PDMA_CUR_SRC_ADDR				0x118 /* Read-only*/
+
+/* CTRL */
+#define PDMA_CLEAR_CTRL					0x0
+#define PDMA_CLAIM_MASK					GENMASK(0, 0)
+#define PDMA_RUN_MASK					GENMASK(1, 1)
+#define PDMA_ENABLE_DONE_INT_MASK			GENMASK(14, 14)
+#define PDMA_ENABLE_ERR_INT_MASK			GENMASK(15, 15)
+#define PDMA_DONE_STATUS_MASK				GENMASK(30, 30)
+#define PDMA_ERR_STATUS_MASK				GENMASK(31, 31)
+
+/* Transfer Type */
+#define PDMA_FULL_SPEED					0xFF000008
+
+/* Error Recovery */
+#define MAX_RETRY					1
+
+#define SF_PDMA_REG_BASE(ch)	(pdma->membase + (PDMA_CHAN_OFFSET * (ch)))
+
+struct pdma_regs {
+	/* read-write regs */
+	void __iomem *ctrl;		/* 4 bytes */
+
+	void __iomem *xfer_type;	/* 4 bytes */
+	void __iomem *xfer_size;	/* 8 bytes */
+	void __iomem *dst_addr;		/* 8 bytes */
+	void __iomem *src_addr;		/* 8 bytes */
+
+	/* read-only */
+	void __iomem *act_type;		/* 4 bytes */
+	void __iomem *residue;		/* 8 bytes */
+	void __iomem *cur_dst_addr;	/* 8 bytes */
+	void __iomem *cur_src_addr;	/* 8 bytes */
+};
+
+struct sf_pdma_desc {
+	u32				xfer_type;
+	u64				xfer_size;
+	u64				dst_addr;
+	u64				src_addr;
+	struct virt_dma_desc		vdesc;
+	struct sf_pdma_chan		*chan;
+	bool				in_use;
+	enum dma_transfer_direction	dirn;
+	struct dma_async_tx_descriptor *async_tx;
+};
+
+enum sf_pdma_pm_state {
+	RUNNING = 0,
+	SUSPENDED,
+};
+
+struct sf_pdma_chan {
+	struct virt_dma_chan		vchan;
+	enum dma_status			status;
+	enum sf_pdma_pm_state		pm_state;
+	u32				slave_id;
+	struct sf_pdma			*pdma;
+	struct sf_pdma_desc		*desc;
+	struct dma_slave_config		cfg;
+	u32				attr;
+	dma_addr_t			dma_dev_addr;
+	u32				dma_dev_size;
+	struct tasklet_struct		done_tasklet;
+	struct tasklet_struct		err_tasklet;
+	struct pdma_regs		regs;
+	spinlock_t			lock; /* protect chan data */
+	bool				xfer_err;
+	int				txirq;
+	int				errirq;
+	int				retries;
+};
+
+struct sf_pdma {
+	struct dma_device       dma_dev;
+	void __iomem            *membase;
+	void __iomem            *mappedbase;
+	u32			n_chans;
+	struct sf_pdma_chan	chans[PDMA_NR_CH];
+};
+
+#endif /* _SF_PDMA_H */

drivers/dma/sh/rcar-dmac.c

@@ -203,19 +203,27 @@ struct rcar_dmac {
 
 	unsigned int n_channels;
 	struct rcar_dmac_chan *channels;
-	unsigned int channels_mask;
+	u32 channels_mask;
 
 	DECLARE_BITMAP(modules, 256);
 };
 
 #define to_rcar_dmac(d)		container_of(d, struct rcar_dmac, engine)
 
+/*
+ * struct rcar_dmac_of_data - This driver's OF data
+ * @chan_offset_base: DMAC channels base offset
+ * @chan_offset_stride: DMAC channels offset stride
+ */
+struct rcar_dmac_of_data {
+	u32 chan_offset_base;
+	u32 chan_offset_stride;
+};
+
 /* -----------------------------------------------------------------------------
  * Registers
  */
 
-#define RCAR_DMAC_CHAN_OFFSET(i)	(0x8000 + 0x80 * (i))
-
 #define RCAR_DMAISTA			0x0020
 #define RCAR_DMASEC			0x0030
 #define RCAR_DMAOR			0x0060
@@ -1726,6 +1734,7 @@ static const struct dev_pm_ops rcar_dmac_pm = {
 
 static int rcar_dmac_chan_probe(struct rcar_dmac *dmac,
 				struct rcar_dmac_chan *rchan,
+				const struct rcar_dmac_of_data *data,
 				unsigned int index)
 {
 	struct platform_device *pdev = to_platform_device(dmac->dev);
@@ -1735,7 +1744,8 @@ static int rcar_dmac_chan_probe(struct rcar_dmac *dmac,
 	int ret;
 
 	rchan->index = index;
-	rchan->iomem = dmac->iomem + RCAR_DMAC_CHAN_OFFSET(index);
+	rchan->iomem = dmac->iomem + data->chan_offset_base +
+		       data->chan_offset_stride * index;
 	rchan->mid_rid = -EINVAL;
 
 	spin_lock_init(&rchan->lock);
@@ -1800,7 +1810,15 @@ static int rcar_dmac_parse_of(struct device *dev, struct rcar_dmac *dmac)
 		return -EINVAL;
 	}
 
+	/*
+	 * If the driver is unable to read dma-channel-mask property,
+	 * the driver assumes that it can use all channels.
+	 */
 	dmac->channels_mask = GENMASK(dmac->n_channels - 1, 0);
+	of_property_read_u32(np, "dma-channel-mask", &dmac->channels_mask);
+
+	/* If the property has out-of-channel mask, this driver clears it */
+	dmac->channels_mask &= GENMASK(dmac->n_channels - 1, 0);
 
 	return 0;
 }
@@ -1813,10 +1831,14 @@ static int rcar_dmac_probe(struct platform_device *pdev)
 		DMA_SLAVE_BUSWIDTH_32_BYTES | DMA_SLAVE_BUSWIDTH_64_BYTES;
 	struct dma_device *engine;
 	struct rcar_dmac *dmac;
-	struct resource *mem;
+	const struct rcar_dmac_of_data *data;
 	unsigned int i;
 	int ret;
 
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data)
+		return -EINVAL;
+
 	dmac = devm_kzalloc(&pdev->dev, sizeof(*dmac), GFP_KERNEL);
 	if (!dmac)
 		return -ENOMEM;
@@ -1848,8 +1870,7 @@ static int rcar_dmac_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* Request resources. */
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dmac->iomem = devm_ioremap_resource(&pdev->dev, mem);
+	dmac->iomem = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dmac->iomem))
 		return PTR_ERR(dmac->iomem);
 
@@ -1901,7 +1922,7 @@ static int rcar_dmac_probe(struct platform_device *pdev)
 		if (!(dmac->channels_mask & BIT(i)))
 			continue;
 
-		ret = rcar_dmac_chan_probe(dmac, &dmac->channels[i], i);
+		ret = rcar_dmac_chan_probe(dmac, &dmac->channels[i], data, i);
 		if (ret < 0)
 			goto error;
 	}
@@ -1948,8 +1969,16 @@ static void rcar_dmac_shutdown(struct platform_device *pdev)
 	rcar_dmac_stop_all_chan(dmac);
 }
 
+static const struct rcar_dmac_of_data rcar_dmac_data = {
+	.chan_offset_base = 0x8000,
+	.chan_offset_stride = 0x80,
+};
+
 static const struct of_device_id rcar_dmac_of_ids[] = {
-	{ .compatible = "renesas,rcar-dmac", },
+	{
+		.compatible = "renesas,rcar-dmac",
+		.data = &rcar_dmac_data,
+	},
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, rcar_dmac_of_ids);

drivers/dma/sprd-dma.c

@@ -99,6 +99,7 @@
 /* DMA_CHN_WARP_* register definition */
 #define SPRD_DMA_HIGH_ADDR_MASK		GENMASK(31, 28)
 #define SPRD_DMA_LOW_ADDR_MASK		GENMASK(31, 0)
+#define SPRD_DMA_WRAP_ADDR_MASK		GENMASK(27, 0)
 #define SPRD_DMA_HIGH_ADDR_OFFSET	4
 
 /* SPRD_DMA_CHN_INTC register definition */
@@ -118,6 +119,8 @@
 #define SPRD_DMA_SWT_MODE_OFFSET	26
 #define SPRD_DMA_REQ_MODE_OFFSET	24
 #define SPRD_DMA_REQ_MODE_MASK		GENMASK(1, 0)
+#define SPRD_DMA_WRAP_SEL_DEST		BIT(23)
+#define SPRD_DMA_WRAP_EN		BIT(22)
 #define SPRD_DMA_FIX_SEL_OFFSET		21
 #define SPRD_DMA_FIX_EN_OFFSET		20
 #define SPRD_DMA_LLIST_END		BIT(19)
@@ -804,6 +807,8 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 	temp |= req_mode << SPRD_DMA_REQ_MODE_OFFSET;
 	temp |= fix_mode << SPRD_DMA_FIX_SEL_OFFSET;
 	temp |= fix_en << SPRD_DMA_FIX_EN_OFFSET;
+	temp |= schan->linklist.wrap_addr ?
+		SPRD_DMA_WRAP_EN | SPRD_DMA_WRAP_SEL_DEST : 0;
 	temp |= slave_cfg->src_maxburst & SPRD_DMA_FRG_LEN_MASK;
 	hw->frg_len = temp;
 
@@ -831,6 +836,12 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 		hw->llist_ptr = lower_32_bits(llist_ptr);
 		hw->src_blk_step = (upper_32_bits(llist_ptr) << SPRD_DMA_LLIST_HIGH_SHIFT) &
 			SPRD_DMA_LLIST_HIGH_MASK;
+
+		if (schan->linklist.wrap_addr) {
+			hw->wrap_ptr |= schan->linklist.wrap_addr &
+				SPRD_DMA_WRAP_ADDR_MASK;
+			hw->wrap_to |= dst & SPRD_DMA_WRAP_ADDR_MASK;
+		}
 	} else {
 		hw->llist_ptr = 0;
 		hw->src_blk_step = 0;
@@ -939,9 +950,11 @@ sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 
 		schan->linklist.phy_addr = ll_cfg->phy_addr;
 		schan->linklist.virt_addr = ll_cfg->virt_addr;
+		schan->linklist.wrap_addr = ll_cfg->wrap_addr;
 	} else {
 		schan->linklist.phy_addr = 0;
 		schan->linklist.virt_addr = 0;
+		schan->linklist.wrap_addr = 0;
 	}
 
 	/*
@@ -1080,7 +1093,6 @@ static int sprd_dma_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct sprd_dma_dev *sdev;
 	struct sprd_dma_chn *dma_chn;
-	struct resource *res;
 	u32 chn_count;
 	int ret, i;
 
@@ -1126,8 +1138,7 @@ static int sprd_dma_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "no interrupts for the dma controller\n");
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	sdev->glb_base = devm_ioremap_resource(&pdev->dev, res);
+	sdev->glb_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(sdev->glb_base))
 		return PTR_ERR(sdev->glb_base);
 

drivers/dma/ti/edma.c

@@ -260,6 +260,13 @@ struct edma_cc {
 	 */
 	unsigned long *slot_inuse;
 
+	/*
+	 * For tracking reserved channels used by DSP.
+	 * If the bit is cleared, the channel is allocated to be used by DSP
+	 * and Linux must not touch it.
+	 */
+	unsigned long *channels_mask;
+
 	struct dma_device		dma_slave;
 	struct dma_device		*dma_memcpy;
 	struct edma_chan		*slave_chans;
@@ -716,6 +723,12 @@ static int edma_alloc_channel(struct edma_chan *echan,
 	struct edma_cc *ecc = echan->ecc;
 	int channel = EDMA_CHAN_SLOT(echan->ch_num);
 
+	if (!test_bit(echan->ch_num, ecc->channels_mask)) {
+		dev_err(ecc->dev, "Channel%d is reserved, can not be used!\n",
+			echan->ch_num);
+		return -EINVAL;
+	}
+
 	/* ensure access through shadow region 0 */
 	edma_or_array2(ecc, EDMA_DRAE, 0, EDMA_REG_ARRAY_INDEX(channel),
 		       EDMA_CHANNEL_BIT(channel));
@@ -2249,10 +2262,8 @@ static int edma_probe(struct platform_device *pdev)
 {
 	struct edma_soc_info	*info = pdev->dev.platform_data;
 	s8			(*queue_priority_mapping)[2];
-	int			i, off;
-	const s16		(*rsv_slots)[2];
-	const s16		(*xbar_chans)[2];
-	int			irq;
+	const s16		(*reserved)[2];
+	int			i, irq;
 	char			*irq_name;
 	struct resource		*mem;
 	struct device_node	*node = pdev->dev.of_node;
@@ -2331,15 +2342,32 @@ static int edma_probe(struct platform_device *pdev)
 	if (!ecc->slot_inuse)
 		return -ENOMEM;
 
+	ecc->channels_mask = devm_kcalloc(dev,
+					   BITS_TO_LONGS(ecc->num_channels),
+					   sizeof(unsigned long), GFP_KERNEL);
+	if (!ecc->channels_mask)
+		return -ENOMEM;
+
+	/* Mark all channels available initially */
+	bitmap_fill(ecc->channels_mask, ecc->num_channels);
+
 	ecc->default_queue = info->default_queue;
 
 	if (info->rsv) {
 		/* Set the reserved slots in inuse list */
-		rsv_slots = info->rsv->rsv_slots;
-		if (rsv_slots) {
-			for (i = 0; rsv_slots[i][0] != -1; i++)
-				bitmap_set(ecc->slot_inuse, rsv_slots[i][0],
-					   rsv_slots[i][1]);
+		reserved = info->rsv->rsv_slots;
+		if (reserved) {
+			for (i = 0; reserved[i][0] != -1; i++)
+				bitmap_set(ecc->slot_inuse, reserved[i][0],
+					   reserved[i][1]);
+		}
+
+		/* Clear channels not usable for Linux */
+		reserved = info->rsv->rsv_chans;
+		if (reserved) {
+			for (i = 0; reserved[i][0] != -1; i++)
+				bitmap_clear(ecc->channels_mask, reserved[i][0],
+					     reserved[i][1]);
 		}
 	}
 
@@ -2349,14 +2377,6 @@ static int edma_probe(struct platform_device *pdev)
 			edma_write_slot(ecc, i, &dummy_paramset);
 	}
 
-	/* Clear the xbar mapped channels in unused list */
-	xbar_chans = info->xbar_chans;
-	if (xbar_chans) {
-		for (i = 0; xbar_chans[i][1] != -1; i++) {
-			off = xbar_chans[i][1];
-		}
-	}
-
 	irq = platform_get_irq_byname(pdev, "edma3_ccint");
 	if (irq < 0 && node)
 		irq = irq_of_parse_and_map(node, 0);
@@ -2399,12 +2419,15 @@ static int edma_probe(struct platform_device *pdev)
 
 	if (!ecc->legacy_mode) {
 		int lowest_priority = 0;
+		unsigned int array_max;
 		struct of_phandle_args tc_args;
 
 		ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
 					    sizeof(*ecc->tc_list), GFP_KERNEL);
-		if (!ecc->tc_list)
-			return -ENOMEM;
+		if (!ecc->tc_list) {
+			ret = -ENOMEM;
+			goto err_reg1;
+		}
 
 		for (i = 0;; i++) {
 			ret = of_parse_phandle_with_fixed_args(node, "ti,tptcs",
@@ -2420,6 +2443,18 @@ static int edma_probe(struct platform_device *pdev)
 				info->default_queue = i;
 			}
 		}
+
+		/* See if we have optional dma-channel-mask array */
+		array_max = DIV_ROUND_UP(ecc->num_channels, BITS_PER_TYPE(u32));
+		ret = of_property_read_variable_u32_array(node,
+						"dma-channel-mask",
+						(u32 *)ecc->channels_mask,
+						1, array_max);
+		if (ret > 0 && ret != array_max)
+			dev_warn(dev, "dma-channel-mask is not complete.\n");
+		else if (ret == -EOVERFLOW || ret == -ENODATA)
+			dev_warn(dev,
+				 "dma-channel-mask is out of range or empty\n");
 	}
 
 	/* Event queue priority mapping */
@@ -2437,6 +2472,10 @@ static int edma_probe(struct platform_device *pdev)
 	edma_dma_init(ecc, legacy_mode);
 
 	for (i = 0; i < ecc->num_channels; i++) {
+		/* Do not touch reserved channels */
+		if (!test_bit(i, ecc->channels_mask))
+			continue;
+
 		/* Assign all channels to the default queue */
 		edma_assign_channel_eventq(&ecc->slave_chans[i],
 					   info->default_queue);

drivers/dma/uniphier-mdmac.c

@@ -382,7 +382,6 @@ static int uniphier_mdmac_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct uniphier_mdmac_device *mdev;
 	struct dma_device *ddev;
-	struct resource *res;
 	int nr_chans, ret, i;
 
 	nr_chans = platform_irq_count(pdev);
@@ -398,8 +397,7 @@ static int uniphier_mdmac_probe(struct platform_device *pdev)
 	if (!mdev)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mdev->reg_base = devm_ioremap_resource(dev, res);
+	mdev->reg_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(mdev->reg_base))
 		return PTR_ERR(mdev->reg_base);
 

drivers/dma/zx_dma.c

@@ -754,18 +754,13 @@ static struct dma_chan *zx_of_dma_simple_xlate(struct of_phandle_args *dma_spec,
 static int zx_dma_probe(struct platform_device *op)
 {
 	struct zx_dma_dev *d;
-	struct resource *iores;
 	int i, ret = 0;
 
-	iores = platform_get_resource(op, IORESOURCE_MEM, 0);
-	if (!iores)
-		return -EINVAL;
-
 	d = devm_kzalloc(&op->dev, sizeof(*d), GFP_KERNEL);
 	if (!d)
 		return -ENOMEM;
 
-	d->base = devm_ioremap_resource(&op->dev, iores);
+	d->base = devm_platform_ioremap_resource(op, 0);
 	if (IS_ERR(d->base))
 		return PTR_ERR(d->base);
 
@@ -894,7 +889,6 @@ static int zx_dma_remove(struct platform_device *op)
 		list_del(&c->vc.chan.device_node);
 	}
 	clk_disable_unprepare(d->clk);
-	dmam_pool_destroy(d->pool);
 
 	return 0;
 }

include/dt-bindings/dma/x1000-dma.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * This header provides macros for X1000 DMA bindings.
+ *
+ * Copyright (c) 2019 Zhou Yanjie <zhouyanjie@zoho.com>
+ */
+
+#ifndef __DT_BINDINGS_DMA_X1000_DMA_H__
+#define __DT_BINDINGS_DMA_X1000_DMA_H__
+
+/*
+ * Request type numbers for the X1000 DMA controller (written to the DRTn
+ * register for the channel).
+ */
+#define X1000_DMA_DMIC_RX	0x5
+#define X1000_DMA_I2S0_TX	0x6
+#define X1000_DMA_I2S0_RX	0x7
+#define X1000_DMA_AUTO		0x8
+#define X1000_DMA_UART2_TX	0x10
+#define X1000_DMA_UART2_RX	0x11
+#define X1000_DMA_UART1_TX	0x12
+#define X1000_DMA_UART1_RX	0x13
+#define X1000_DMA_UART0_TX	0x14
+#define X1000_DMA_UART0_RX	0x15
+#define X1000_DMA_SSI0_TX	0x16
+#define X1000_DMA_SSI0_RX	0x17
+#define X1000_DMA_MSC0_TX	0x1a
+#define X1000_DMA_MSC0_RX	0x1b
+#define X1000_DMA_MSC1_TX	0x1c
+#define X1000_DMA_MSC1_RX	0x1d
+#define X1000_DMA_PCM0_TX	0x20
+#define X1000_DMA_PCM0_RX	0x21
+#define X1000_DMA_SMB0_TX	0x24
+#define X1000_DMA_SMB0_RX	0x25
+#define X1000_DMA_SMB1_TX	0x26
+#define X1000_DMA_SMB1_RX	0x27
+#define X1000_DMA_SMB2_TX	0x28
+#define X1000_DMA_SMB2_RX	0x29
+
+#endif /* __DT_BINDINGS_DMA_X1000_DMA_H__ */

include/linux/dma/sprd-dma.h

@@ -118,6 +118,9 @@ enum sprd_dma_int_type {
  * struct sprd_dma_linklist - DMA link-list address structure
  * @virt_addr: link-list virtual address to configure link-list node
  * @phy_addr: link-list physical address to link DMA transfer
+ * @wrap_addr: the wrap address for link-list mode, which means once the
+ * transfer address reaches the wrap address, the next transfer address
+ * will jump to the address specified by wrap_to register.
  *
  * The Spreadtrum DMA controller supports the link-list mode, that means slaves
  * can supply several groups configurations (each configuration represents one
@@ -181,6 +184,7 @@ enum sprd_dma_int_type {
 struct sprd_dma_linklist {
 	unsigned long virt_addr;
 	phys_addr_t phy_addr;
+	phys_addr_t wrap_addr;
 };
 
 #endif