Commit a57a46b9 authored by Alastair Bridgewater's avatar Alastair Bridgewater Committed by Takashi Iwai

ALSA: hda/ca0132: Fix DMic data rate for Alienware M17x R4

The commentary says to use various parameters, and lays out what
the mapping is...  The code used a 32KHz rate when the comment
says that it needs to use a 48KHz rate.  And this has been the
case since day one.

On the Alienware M17x R4, the DMic used to have exceptionally quiet
pickup and a lot of noise.  Changing the data rate fixes both of
these issues.

Searching the kernel bug tracker for ca0132-related issues shows no
mention of this being an issue for other hardware, and I have no
other hardware to test with, so a quirk is used to limit the effect
to just the M17x R4.
Signed-off-by: default avatarAlastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 5f8ddc6e
......@@ -991,6 +991,7 @@ struct ca0132_spec {
enum {
QUIRK_NONE,
QUIRK_ALIENWARE,
QUIRK_ALIENWARE_M17XR4,
QUIRK_SBZ,
QUIRK_R3DI,
};
......@@ -1040,6 +1041,7 @@ static const struct hda_pintbl r3di_pincfgs[] = {
};
static const struct snd_pci_quirk ca0132_quirks[] = {
SND_PCI_QUIRK(0x1028, 0x057b, "Alienware M17x R4", QUIRK_ALIENWARE_M17XR4),
SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE),
SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE),
SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE),
......@@ -6130,6 +6132,9 @@ static void ca0132_init_dmic(struct hda_codec *codec)
* Bit 6: set to select Data2, clear for Data1
* Bit 7: set to enable DMic, clear for AMic
*/
if (spec->quirk == QUIRK_ALIENWARE_M17XR4)
val = 0x33;
else
val = 0x23;
/* keep a copy of dmic ctl val for enable/disable dmic purpuse */
spec->dmic_ctl = val;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment