Commit a5ec96dd authored by Leonid Bloch's avatar Leonid Bloch Committed by Linus Walleij

gpio: it87: Add support for IT8613

This was tested on actual hardware and found to work fine, but currently
the official specifications of this chip could not be obtained to
confirm the numbers.
Signed-off-by: default avatarLeonid Bloch <lbloch@janustech.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 62885203
...@@ -693,7 +693,8 @@ config GPIO_IT87 ...@@ -693,7 +693,8 @@ config GPIO_IT87
Say yes here to support GPIO functionality of IT87xx Super I/O chips. Say yes here to support GPIO functionality of IT87xx Super I/O chips.
This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
supports the IT8761E, IT8620E and IT8628E Super I/O chip as well. supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as
well.
To compile this driver as a module, choose M here: the module will To compile this driver as a module, choose M here: the module will
be called gpio_it87 be called gpio_it87
......
...@@ -35,6 +35,7 @@ ...@@ -35,6 +35,7 @@
/* Chip Id numbers */ /* Chip Id numbers */
#define NO_DEV_ID 0xffff #define NO_DEV_ID 0xffff
#define IT8613_ID 0x8613
#define IT8620_ID 0x8620 #define IT8620_ID 0x8620
#define IT8628_ID 0x8628 #define IT8628_ID 0x8628
#define IT8718_ID 0x8718 #define IT8718_ID 0x8718
...@@ -308,6 +309,14 @@ static int __init it87_gpio_init(void) ...@@ -308,6 +309,14 @@ static int __init it87_gpio_init(void)
it87_gpio->chip = it87_template_chip; it87_gpio->chip = it87_template_chip;
switch (chip_type) { switch (chip_type) {
case IT8613_ID:
gpio_ba_reg = 0x62;
it87_gpio->io_size = 8; /* it8613 only needs 6, use 8 for alignment */
it87_gpio->output_base = 0xc8;
it87_gpio->simple_base = 0xc0;
it87_gpio->simple_size = 6;
it87_gpio->chip.ngpio = 64; /* has 48, use 64 for convenient calc */
break;
case IT8620_ID: case IT8620_ID:
case IT8628_ID: case IT8628_ID:
gpio_ba_reg = 0x62; gpio_ba_reg = 0x62;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment