net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTER

The AFE_RX_LP_COUNTER kept the last 3 bits set, which would not properly
clear the EEE LPI mode errors bits. Make sure that those bits are set to
0 to ensure the PHY timing is always good even during EEE wake-up.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/bcm7xxx.c

@@ -135,7 +135,7 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
 	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
 
 	/* write AFE_RX_LP_COUNTER */
-	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7);
+	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
 
 	/* write AFE_HPF_TRIM_OTHERS */
 	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);