sh_eth: add sh_eth_cpu_data::gecmr flag

Not all Ether controllers having the Gigabit register layout have GECMR --
RZ/A1 (AKA R7S72100) actually has the same layout but no Gigabit speed
support and hence no GECMR. In the past, the new register map table was
added for this SoC, now I think we should have used the existing Gigabit
table with the differences (such as GECMR) covered by the mere flags in
the 'struct sh_eth_cpu_data'. Add such flag for GECMR -- and then we can
get rid of the R7S72100 specific layout in the next patch...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/renesas/sh_eth.c

@@ -569,6 +569,9 @@ static void sh_eth_set_rate_gether(struct net_device *ndev)
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
+	if (WARN_ON(!mdp->cd->gecmr))
+		return;
+
 	switch (mdp->speed) {
 	case 10: /* 10BASE */
 		sh_eth_write(ndev, GECMR_10, GECMR);
@@ -663,6 +666,7 @@ static struct sh_eth_cpu_data r8a7740_data = {
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.rpadir		= 1,
@@ -788,6 +792,7 @@ static struct sh_eth_cpu_data r8a77980_data = {
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.nbst		= 1,
@@ -957,6 +962,9 @@ static void sh_eth_set_rate_giga(struct net_device *ndev)
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
+	if (WARN_ON(!mdp->cd->gecmr))
+		return;
+
 	switch (mdp->speed) {
 	case 10: /* 10BASE */
 		sh_eth_write(ndev, 0x00000000, GECMR);
@@ -1002,6 +1010,7 @@ static struct sh_eth_cpu_data sh7757_data_giga = {
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.rpadir		= 1,
@@ -1042,6 +1051,7 @@ static struct sh_eth_cpu_data sh7734_data = {
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.no_trimd	= 1,
@@ -1083,6 +1093,7 @@ static struct sh_eth_cpu_data sh7763_data = {
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.no_trimd	= 1,
@@ -2181,6 +2192,7 @@ static size_t __sh_eth_get_regs(struct net_device *ndev, u32 *buf)
 	if (cd->tpauser)
 		add_reg(TPAUSER);
 	add_reg(TPAUSECR);
+	if (cd->gecmr)
 		add_reg(GECMR);
 	if (cd->bculr)
 		add_reg(BCULR);

drivers/net/ethernet/renesas/sh_eth.h

@@ -490,6 +490,7 @@ struct sh_eth_cpu_data {
 	unsigned apr:1;		/* EtherC has APR */
 	unsigned mpr:1;		/* EtherC has MPR */
 	unsigned tpauser:1;	/* EtherC has TPAUSER */
+	unsigned gecmr:1;	/* EtherC has GECMR */
 	unsigned bculr:1;	/* EtherC has BCULR */
 	unsigned tsu:1;		/* EtherC has TSU */
 	unsigned hw_swap:1;	/* E-DMAC has DE bit in EDMR */