Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu updates from Greg Ungerer:
 "The bulk of the changes here are to clean up the ColdFire 5441x SoC
  support so that it can run with MMU enabled. We have only supported it
  with MMU disabled up to now.

  There is also a few individual bug fixes across the ColdFire support
  code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: let clk_disable() return immediately if clk is NULL
  m68knommu: convert printk(KERN_INFO) to pr_info()
  m68knommu: clean up uClinux boot log output
  m68k: generalize uboot command line support
  m68k: don't panic if no hardware FPU defined
  m68k: only generate FPU instructions if CONFIG_FPU enabled
  m68k: always make available dump_fpu()
  m68k: generalize io memory region setup for ColdFire ACR registers
  m68k: move ColdFire _bootmem_alloc code
  m68k: report correct FPU type on ColdFire MMU platforms
  m68k: set appropriate machine type for m5411x SoC platforms
  m68k: move CONFIG_FPU set to per-CPU configuration
  m68knommu: fix IO write size in nettel pin set
  m68knommu: switch to using IO access methods in WildFire board code
  m68knommu: fix early setup to not access variables

arch/m68k/Kconfig

@@ -14,7 +14,6 @@ config M68K
 	select GENERIC_IOMAP
 	select GENERIC_STRNCPY_FROM_USER if MMU
 	select GENERIC_STRNLEN_USER if MMU
-	select FPU if MMU
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
 	select HAVE_FUTEX_CMPXCHG if MMU && FUTEX

arch/m68k/Kconfig.cpu

@@ -62,6 +62,7 @@ config MCPU32
 config M68020
 	bool "68020 support"
 	depends on MMU
+	select FPU
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68020
@@ -72,6 +73,7 @@ config M68020
 config M68030
 	bool "68030 support"
 	depends on MMU && !MMU_SUN3
+	select FPU
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68030
@@ -81,6 +83,7 @@ config M68030
 config M68040
 	bool "68040 support"
 	depends on MMU && !MMU_SUN3
+	select FPU
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68LC040
@@ -91,6 +94,7 @@ config M68040
 config M68060
 	bool "68060 support"
 	depends on MMU && !MMU_SUN3
+	select FPU
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68060
@@ -259,6 +263,7 @@ config M547x
 	bool "MCF547x"
 	select M54xx
 	select MMU_COLDFIRE if MMU
+	select FPU if MMU
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
 	select CPU_NO_EFFICIENT_FFS
@@ -268,6 +273,7 @@ config M547x
 config M548x
 	bool "MCF548x"
 	select MMU_COLDFIRE if MMU
+	select FPU if MMU
 	select M54xx
 	select HAVE_CACHE_CB
 	select HAVE_MBAR

arch/m68k/coldfire/clk.c

@@ -101,6 +101,10 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
+
+	if (!clk)
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	if ((--clk->enabled == 0) && clk->clk_ops)
 		clk->clk_ops->disable(clk);

arch/m68k/coldfire/head.S

@@ -280,10 +280,10 @@ _clear_bss:
 	movel	%d0,m68k_cputype		/* Mark us as a ColdFire */
 	movel	#MMU_COLDFIRE,%d0
 	movel	%d0,m68k_mmutype
-	movel	#FPU_COLDFIRE,%d0
-	movel	%d0,m68k_fputype
-	movel	#MACH_M54XX,%d0
-	movel	%d0,m68k_machtype		/* Mark us as a 54xx machine */
+	movel	#FPUTYPE,%d0
+	movel	%d0,m68k_fputype		/* Mark FPU type */
+	movel	#MACHINE,%d0
+	movel	%d0,m68k_machtype		/* Mark machine type */
 	lea	init_task,%a2			/* Set "current" init task */
 #endif
 

arch/m68k/coldfire/m528x.c

@@ -102,14 +102,14 @@ void wildfiremod_halt(void)
 	printk(KERN_INFO "WildFireMod hibernating...\n");
 
 	/* Set portE.5 to Digital IO */
-	MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
+	writew(readw(MCFGPIO_PEPAR) & ~(1 << (5 * 2)), MCFGPIO_PEPAR);
 
 	/* Make portE.5 an output */
-	MCF5282_GPIO_DDRE |= (1 << 5);
+	writeb(readb(MCFGPIO_PDDR_E) | (1 << 5), MCFGPIO_PDDR_E);
 
 	/* Now toggle portE.5 from low to high */
-	MCF5282_GPIO_PORTE &= ~(1 << 5);
-	MCF5282_GPIO_PORTE |= (1 << 5);
+	writeb(readb(MCFGPIO_PODR_E) & ~(1 << 5), MCFGPIO_PODR_E);
+	writeb(readb(MCFGPIO_PODR_E) | (1 << 5), MCFGPIO_PODR_E);
 
 	printk(KERN_EMERG "Failed to hibernate. Halting!\n");
 }

arch/m68k/coldfire/m53xx.c

@@ -271,9 +271,6 @@ void __init config_BSP(char *commandp, int size)
 
 #define NAND_FLASH_ADDRESS	(0xD0000000)
 
-int sys_clk_khz = 0;
-int sys_clk_mhz = 0;
-
 void wtm_init(void);
 void scm_init(void);
 void gpio_init(void);
@@ -286,8 +283,7 @@ int  get_sys_clock (void);
 
 asmlinkage void __init sysinit(void)
 {
-	sys_clk_khz = clock_pll(0, 0);
-	sys_clk_mhz = sys_clk_khz/1000;
+	clock_pll(0, 0);
 
 	wtm_init();
 	scm_init();

arch/m68k/coldfire/m54xx.c

@@ -25,7 +25,6 @@
 #include <asm/m54xxgpt.h>
 #ifdef CONFIG_MMU
 #include <asm/mmu_context.h>
-#include <linux/pfn.h>
 #endif
 
 /***************************************************************************/
@@ -78,47 +77,10 @@ static void mcf54xx_reset(void)
 
 /***************************************************************************/
 
-#ifdef CONFIG_MMU
-
-unsigned long num_pages;
-
-static void __init mcf54xx_bootmem_alloc(void)
-{
-	unsigned long start_pfn;
-	unsigned long memstart;
-
-	/* _rambase and _ramend will be naturally page aligned */
-	m68k_memory[0].addr = _rambase;
-	m68k_memory[0].size = _ramend - _rambase;
-
-	/* compute total pages in system */
-	num_pages = PFN_DOWN(_ramend - _rambase);
-
-	/* page numbers */
-	memstart = PAGE_ALIGN(_ramstart);
-	min_low_pfn = PFN_DOWN(_rambase);
-	start_pfn = PFN_DOWN(memstart);
-	max_pfn = max_low_pfn = PFN_DOWN(_ramend);
-	high_memory = (void *)_ramend;
-
-	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
-	module_fixup(NULL, __start_fixup, __stop_fixup);
-
-	/* setup bootmem data */
-	m68k_setup_node(0);
-	memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
-		min_low_pfn, max_low_pfn);
-	free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
-}
-
-#endif /* CONFIG_MMU */
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
 #ifdef CONFIG_MMU
-	mcf54xx_bootmem_alloc();
+	cf_bootmem_alloc();
 	mmu_context_init();
 #endif
 	mach_reset = mcf54xx_reset;

arch/m68k/include/asm/bootinfo.h

@@ -22,6 +22,12 @@ extern void save_bootinfo(const struct bi_record *bi);
 static inline void save_bootinfo(const struct bi_record *bi) {}
 #endif
 
+#ifdef CONFIG_UBOOT
+void process_uboot_commandline(char *commandp, int size);
+#else
+static inline void process_uboot_commandline(char *commandp, int size) {}
+#endif
+
 #endif /* __ASSEMBLY__ */
 
 

arch/m68k/include/asm/m5441xsim.h

@@ -10,6 +10,10 @@
 #define CPU_NAME		"COLDFIRE(m5441x)"
 #define CPU_INSTR_PER_JIFFY	2
 #define MCF_BUSCLK		(MCF_CLK / 2)
+#define MACHINE			MACH_M5441X
+#define FPUTYPE			0
+#define IOMEMBASE		0xe0000000
+#define IOMEMSIZE		0x20000000
 
 #include <asm/m54xxacr.h>
 

arch/m68k/include/asm/m54xxacr.h

@@ -94,7 +94,7 @@
  *	register region as non-cacheable. And then we map all our RAM as
  *	cacheable and supervisor access only.
  */
-#define ACR0_MODE	(ACR_BA(CONFIG_MBAR)+ACR_ADMSK(0x1000000)+ \
+#define ACR0_MODE	(ACR_BA(IOMEMBASE)+ACR_ADMSK(IOMEMSIZE)+ \
 			 ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP)
 #if defined(CONFIG_CACHE_COPYBACK)
 #define ACR1_MODE	(ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \

arch/m68k/include/asm/m54xxsim.h

@@ -8,6 +8,10 @@
 #define	CPU_NAME		"COLDFIRE(m54xx)"
 #define	CPU_INSTR_PER_JIFFY	2
 #define	MCF_BUSCLK		(MCF_CLK / 2)
+#define	MACHINE			MACH_M54XX
+#define	FPUTYPE			FPU_COLDFIRE
+#define	IOMEMBASE		MCF_MBAR
+#define	IOMEMSIZE		0x01000000
 
 #include <asm/m54xxacr.h>
 

arch/m68k/include/asm/mcfmmu.h

@@ -105,6 +105,7 @@ static inline void mmu_write(u32 a, u32 v)
 	__asm__ __volatile__ ("nop");
 }
 
+void cf_bootmem_alloc(void);
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word);
 
 #endif

arch/m68k/include/asm/nettel.h

@@ -92,7 +92,7 @@ static __inline__ unsigned int mcf_getppdata(void)
 
 static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
 {
-	write((readw(MCFSIM_PBDAT) & ~mask) | bits, MCFSIM_PBDAT);
+	writew((readw(MCFSIM_PBDAT) & ~mask) | bits, MCFSIM_PBDAT);
 }
 #endif
 

arch/m68k/include/uapi/asm/bootinfo.h

@@ -81,6 +81,7 @@ struct mem_info {
 #define MACH_Q40		10
 #define MACH_SUN3X		11
 #define MACH_M54XX		12
+#define MACH_M5441X		13
 
 
     /*

arch/m68k/kernel/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_HAS_DMA)	+= dma.o
 
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_BOOTINFO_PROC)	+= bootinfo_proc.o
+obj-$(CONFIG_UBOOT)		+= uboot.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 

arch/m68k/kernel/process.c

@@ -203,11 +203,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 }
 
 /* Fill in the fpu structure for a core dump.  */
-#ifdef CONFIG_FPU
 int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
 {
-	char fpustate[216];
-
 	if (FPU_IS_EMU) {
 		int i;
 
@@ -222,6 +219,9 @@ int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
 		return 1;
 	}
 
+	if (IS_ENABLED(CONFIG_FPU)) {
+		char fpustate[216];
+
 		/* First dump the fpu context to avoid protocol violation.  */
 		asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
 		if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
@@ -248,11 +248,11 @@ int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
 				      : "m" (fpu->fpregs[0])
 				      : "memory");
 		}
+	}
 
 	return 1;
 }
 EXPORT_SYMBOL(dump_fpu);
-#endif /* CONFIG_FPU */
 
 unsigned long get_wchan(struct task_struct *p)
 {

arch/m68k/kernel/setup_mm.c

@@ -245,7 +245,7 @@ void __init setup_arch(char **cmdline_p)
 	 * We should really do our own FPU check at startup.
 	 * [what do we do with buggy 68LC040s? if we have problems
 	 *  with them, we should add a test to check_bugs() below] */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
+#if defined(CONFIG_FPU) && !defined(CONFIG_M68KFPU_EMU_ONLY)
 	/* clear the fpu if we have one */
 	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|FPU_COLDFIRE)) {
 		volatile int zero = 0;
@@ -274,6 +274,7 @@ void __init setup_arch(char **cmdline_p)
 	strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE);
 	m68k_command_line[CL_SIZE - 1] = 0;
 #endif /* CONFIG_BOOTPARAM */
+	process_uboot_commandline(&m68k_command_line[0], CL_SIZE);
 	*cmdline_p = m68k_command_line;
 	memcpy(boot_command_line, *cmdline_p, CL_SIZE);
 
@@ -341,6 +342,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #ifdef CONFIG_COLDFIRE
 	case MACH_M54XX:
+	case MACH_M5441X:
 		config_BSP(NULL, 0);
 		break;
 #endif
@@ -548,7 +550,7 @@ module_init(proc_hardware_init);
 
 void check_bugs(void)
 {
-#ifndef CONFIG_M68KFPU_EMU
+#if defined(CONFIG_FPU) && !defined(CONFIG_M68KFPU_EMU)
 	if (m68k_fputype == 0) {
 		pr_emerg("*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
 			"WHICH IS REQUIRED BY LINUX/M68K ***\n");

arch/m68k/kernel/setup_no.c

@@ -34,6 +34,7 @@
 #include <linux/rtc.h>
 
 #include <asm/setup.h>
+#include <asm/bootinfo.h>
 #include <asm/irq.h>
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -82,69 +83,6 @@ void (*mach_power_off)(void);
 #define	CPU_INSTR_PER_JIFFY	16
 #endif
 
-#if defined(CONFIG_UBOOT)
-/*
- * parse_uboot_commandline
- *
- * Copies u-boot commandline arguments and store them in the proper linux
- * variables.
- *
- * Assumes:
- *	_init_sp global contains the address in the stack pointer when the
- *	kernel starts (see head.S::_start)
- *
- *	U-Boot calling convention:
- *	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
- *
- *	_init_sp can be parsed as such
- *
- *	_init_sp+00 = u-boot cmd after jsr into kernel (skip)
- *	_init_sp+04 = &kernel board_info (residual data)
- *	_init_sp+08 = &initrd_start
- *	_init_sp+12 = &initrd_end
- *	_init_sp+16 = &cmd_start
- *	_init_sp+20 = &cmd_end
- *
- *	This also assumes that the memory locations pointed to are still
- *	unmodified. U-boot places them near the end of external SDRAM.
- *
- * Argument(s):
- *	commandp = the linux commandline arg container to fill.
- *	size     = the sizeof commandp.
- *
- * Returns:
- */
-static void __init parse_uboot_commandline(char *commandp, int size)
-{
-	extern unsigned long _init_sp;
-	unsigned long *sp;
-	unsigned long uboot_kbd;
-	unsigned long uboot_initrd_start, uboot_initrd_end;
-	unsigned long uboot_cmd_start, uboot_cmd_end;
-
-
-	sp = (unsigned long *)_init_sp;
-	uboot_kbd = sp[1];
-	uboot_initrd_start = sp[2];
-	uboot_initrd_end = sp[3];
-	uboot_cmd_start = sp[4];
-	uboot_cmd_end = sp[5];
-
-	if (uboot_cmd_start && uboot_cmd_end)
-		strncpy(commandp, (const char *)uboot_cmd_start, size);
-#if defined(CONFIG_BLK_DEV_INITRD)
-	if (uboot_initrd_start && uboot_initrd_end &&
-		(uboot_initrd_end > uboot_initrd_start)) {
-		initrd_start = uboot_initrd_start;
-		initrd_end = uboot_initrd_end;
-		ROOT_DEV = Root_RAM0;
-		printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
-			initrd_start, initrd_end);
-	}
-#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
-}
-#endif /* #if defined(CONFIG_UBOOT) */
-
 void __init setup_arch(char **cmdline_p)
 {
 	int bootmap_size;
@@ -164,53 +102,38 @@ void __init setup_arch(char **cmdline_p)
 	command_line[sizeof(command_line) - 1] = 0;
 #endif /* CONFIG_BOOTPARAM */
 
-#if defined(CONFIG_UBOOT)
-	/* CONFIG_UBOOT and CONFIG_BOOTPARAM defined, concatenate cmdline */
-	#if defined(CONFIG_BOOTPARAM)
-		/* Add the whitespace separator */
-		command_line[strlen(CONFIG_BOOTPARAM_STRING)] = ' ';
-		/* Parse uboot command line into the rest of the buffer */
-		parse_uboot_commandline(
-			&command_line[(strlen(CONFIG_BOOTPARAM_STRING)+1)],
-			(sizeof(command_line) -
-			(strlen(CONFIG_BOOTPARAM_STRING)+1)));
-	/* Only CONFIG_UBOOT defined, create cmdline */
-	#else
-		parse_uboot_commandline(&command_line[0], sizeof(command_line));
-	#endif /* CONFIG_BOOTPARAM */
-	command_line[sizeof(command_line) - 1] = 0;
-#endif /* CONFIG_UBOOT */
+	process_uboot_commandline(&command_line[0], sizeof(command_line));
 
-	printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU_NAME "\n");
+	pr_info("uClinux with CPU " CPU_NAME "\n");
 
 #ifdef CONFIG_UCDIMM
-	printk(KERN_INFO "uCdimm by Lineo, Inc. <www.lineo.com>\n");
+	pr_info("uCdimm by Lineo, Inc. <www.lineo.com>\n");
 #endif
 #ifdef CONFIG_M68VZ328
-	printk(KERN_INFO "M68VZ328 support by Evan Stawnyczy <e@lineo.ca>\n");
+	pr_info("M68VZ328 support by Evan Stawnyczy <e@lineo.ca>\n");
 #endif
 #ifdef CONFIG_COLDFIRE
-	printk(KERN_INFO "COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n");
+	pr_info("COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n");
 #ifdef CONFIG_M5307
-	printk(KERN_INFO "Modified for M5307 by Dave Miller, dmiller@intellistor.com\n");
+	pr_info("Modified for M5307 by Dave Miller, dmiller@intellistor.com\n");
 #endif
 #ifdef CONFIG_ELITE
-	printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
+	pr_info("Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
 #endif
 #endif
-	printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
+	pr_info("Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
 
 #if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )
-	printk(KERN_INFO "TRG SuperPilot FLASH card support <info@trgnet.com>\n");
+	pr_info("TRG SuperPilot FLASH card support <info@trgnet.com>\n");
 #endif
 #if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
-	printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
+	pr_info("PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
 #endif
 #ifdef CONFIG_DRAGEN2
-	printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
+	pr_info("DragonEngine II board support by Georges Menie\n");
 #endif
 #ifdef CONFIG_M5235EVB
-	printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
+	pr_info("Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
 #endif
 
 	pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",

arch/m68k/kernel/uboot.c

+/*
+ * uboot.c -- uboot arguments support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/rtc.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+
+/*
+ * parse_uboot_commandline
+ *
+ * Copies u-boot commandline arguments and store them in the proper linux
+ * variables.
+ *
+ * Assumes:
+ *	_init_sp global contains the address in the stack pointer when the
+ *	kernel starts (see head.S::_start)
+ *
+ *	U-Boot calling convention:
+ *	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+ *
+ *	_init_sp can be parsed as such
+ *
+ *	_init_sp+00 = u-boot cmd after jsr into kernel (skip)
+ *	_init_sp+04 = &kernel board_info (residual data)
+ *	_init_sp+08 = &initrd_start
+ *	_init_sp+12 = &initrd_end
+ *	_init_sp+16 = &cmd_start
+ *	_init_sp+20 = &cmd_end
+ *
+ *	This also assumes that the memory locations pointed to are still
+ *	unmodified. U-boot places them near the end of external SDRAM.
+ *
+ * Argument(s):
+ *	commandp = the linux commandline arg container to fill.
+ *	size     = the sizeof commandp.
+ *
+ * Returns:
+ */
+static void __init parse_uboot_commandline(char *commandp, int size)
+{
+	extern unsigned long _init_sp;
+	unsigned long *sp;
+	unsigned long uboot_kbd;
+	unsigned long uboot_initrd_start, uboot_initrd_end;
+	unsigned long uboot_cmd_start, uboot_cmd_end;
+
+	sp = (unsigned long *)_init_sp;
+	uboot_kbd = sp[1];
+	uboot_initrd_start = sp[2];
+	uboot_initrd_end = sp[3];
+	uboot_cmd_start = sp[4];
+	uboot_cmd_end = sp[5];
+
+	if (uboot_cmd_start && uboot_cmd_end)
+		strncpy(commandp, (const char *)uboot_cmd_start, size);
+#if defined(CONFIG_BLK_DEV_INITRD)
+	if (uboot_initrd_start && uboot_initrd_end &&
+	    (uboot_initrd_end > uboot_initrd_start)) {
+		initrd_start = uboot_initrd_start;
+		initrd_end = uboot_initrd_end;
+		ROOT_DEV = Root_RAM0;
+		printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
+			initrd_start, initrd_end);
+	}
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+}
+
+__init void process_uboot_commandline(char *commandp, int size)
+{
+	int len, n;
+
+	n = strnlen(commandp, size);
+	commandp += n;
+	len = size - n;
+	if (len) {
+		/* Add the whitespace separator */
+		*commandp++ = ' ';
+		len--;
+	}
+
+	parse_uboot_commandline(commandp, len);
+	commandp[size - 1] = 0;
+}

arch/m68k/mm/mcfmmu.c

@@ -27,7 +27,7 @@ mm_context_t next_mmu_context;
 unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
 atomic_t nr_free_contexts;
 struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern unsigned long num_pages;
+unsigned long num_pages;
 
 /*
  * ColdFire paging_init derived from sun3.
@@ -150,6 +150,35 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 	return 0;
 }
 
+void __init cf_bootmem_alloc(void)
+{
+	unsigned long start_pfn;
+	unsigned long memstart;
+
+	/* _rambase and _ramend will be naturally page aligned */
+	m68k_memory[0].addr = _rambase;
+	m68k_memory[0].size = _ramend - _rambase;
+
+	/* compute total pages in system */
+	num_pages = PFN_DOWN(_ramend - _rambase);
+
+	/* page numbers */
+	memstart = PAGE_ALIGN(_ramstart);
+	min_low_pfn = PFN_DOWN(_rambase);
+	start_pfn = PFN_DOWN(memstart);
+	max_pfn = max_low_pfn = PFN_DOWN(_ramend);
+	high_memory = (void *)_ramend;
+
+	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
+	module_fixup(NULL, __start_fixup, __stop_fixup);
+
+	/* setup bootmem data */
+	m68k_setup_node(0);
+	memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
+		min_low_pfn, max_low_pfn);
+	free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
+}
+
 /*
  * Initialize the context management stuff.
  * The following was taken from arch/ppc/mmu_context.c