ACPI / PM: Move device PM functions related to sleep states

Introduce helper function returning the target sleep state of the
system and use it to move the remaining device power management
functions from sleep.c to device_pm.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/acpi/device_pm.c

@@ -198,6 +198,31 @@ int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
 }
 EXPORT_SYMBOL_GPL(acpi_device_power_state);
 
+/**
+ * acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ */
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+		return -ENODEV;
+	}
+
+	return acpi_device_power_state(dev, adev, acpi_target_system_state(),
+				       d_max_in, d_min_p);
+}
+EXPORT_SYMBOL(acpi_pm_device_sleep_state);
+
 #ifdef CONFIG_PM_RUNTIME
 /**
  * __acpi_device_run_wake - Enable/disable runtime remote wakeup for device.
@@ -274,4 +299,33 @@ int __acpi_device_sleep_wake(struct acpi_device *adev, u32 target_state,
 		acpi_enable_wakeup_device_power(adev, target_state) :
 		acpi_disable_wakeup_device_power(adev);
 }
+
+/**
+ * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system from sleep states.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+	acpi_handle handle;
+	struct acpi_device *adev;
+	int error;
+
+	if (!device_can_wakeup(dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+		return -ENODEV;
+	}
+
+	error = __acpi_device_sleep_wake(adev, acpi_target_system_state(),
+					 enable);
+	if (!error)
+		dev_info(dev, "System wakeup %s by ACPI\n",
+				enable ? "enabled" : "disabled");
+
+	return error;
+}
 #endif /* CONFIG_PM_SLEEP */

drivers/acpi/sleep.c

@@ -80,6 +80,12 @@ static int acpi_sleep_prepare(u32 acpi_state)
 
 #ifdef CONFIG_ACPI_SLEEP
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+u32 acpi_target_system_state(void)
+{
+	return acpi_target_sleep_state;
+}
+
 static bool pwr_btn_event_pending;
 
 /*
@@ -680,63 +686,6 @@ int acpi_suspend(u32 acpi_state)
 	return -EINVAL;
 }
 
-#ifdef CONFIG_PM
-/**
- * acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
- * @dev: Device whose preferred target power state to return.
- * @d_min_p: Location to store the upper limit of the allowed states range.
- * @d_max_in: Deepest low-power state to take into consideration.
- * Return value: Preferred power state of the device on success, -ENODEV
- * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
- *
- * The caller must ensure that @dev is valid before using this function.
- */
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
-{
-	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
-	struct acpi_device *adev;
-
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
-		return -ENODEV;
-	}
-
-	return acpi_device_power_state(dev, adev, acpi_target_sleep_state,
-				       d_max_in, d_min_p);
-}
-EXPORT_SYMBOL(acpi_pm_device_sleep_state);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
- * @dev: Device to enable/desible to wake up the system from sleep states.
- * @enable: Whether to enable or disable @dev to wake up the system.
- */
-int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
-{
-	acpi_handle handle;
-	struct acpi_device *adev;
-	int error;
-
-	if (!device_can_wakeup(dev))
-		return -EINVAL;
-
-	handle = DEVICE_ACPI_HANDLE(dev);
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
-		return -ENODEV;
-	}
-
-	error = __acpi_device_sleep_wake(adev, acpi_target_sleep_state, enable);
-	if (!error)
-		dev_info(dev, "System wakeup %s by ACPI\n",
-				enable ? "enabled" : "disabled");
-
-	return error;
-}
-#endif  /* CONFIG_PM_SLEEP */
-
 static void acpi_power_off_prepare(void)
 {
 	/* Prepare to power off the system */

include/acpi/acpi_bus.h

@@ -470,9 +470,11 @@ static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
 #endif
 
 #ifdef CONFIG_PM_SLEEP
+u32 acpi_target_system_state(void);
 int __acpi_device_sleep_wake(struct acpi_device *, u32, bool);
 int acpi_pm_device_sleep_wake(struct device *, bool);
 #else
+static inline u32 acpi_target_system_state(void) { return ACPI_STATE_S0; }
 static inline int __acpi_device_sleep_wake(struct acpi_device *adev,
 					   u32 target_state, bool enable)
 {