[SCSI] esp: Correct chip ID probing sequence.

The features enable bit has to be set in the config2 register
before we can be absolutely sure we will probe a correct
part unique ID and family code from the transfer-count-high
register.

Also, reload the CFACT, STP, SOFF, and TIMEO near the end of
esp_reset_esp().

From a patch by Maciej W. Rozycki.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/esp_scsi.c

@@ -219,19 +219,10 @@ static void esp_reset_esp(struct esp *esp)
 	/* Now reset the ESP chip */
 	scsi_esp_cmd(esp, ESP_CMD_RC);
 	scsi_esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA);
+	if (esp->rev == FAST)
+		esp_write8(ESP_CONFIG2_FENAB, ESP_CFG2);
 	scsi_esp_cmd(esp, ESP_CMD_NULL | ESP_CMD_DMA);
 
-	/* Reload the configuration registers */
-	esp_write8(esp->cfact, ESP_CFACT);
-
-	esp->prev_stp = 0;
-	esp_write8(esp->prev_stp, ESP_STP);
-
-	esp->prev_soff = 0;
-	esp_write8(esp->prev_soff, ESP_SOFF);
-
-	esp_write8(esp->neg_defp, ESP_TIMEO);
-
 	/* This is the only point at which it is reliable to read
 	 * the ID-code for a fast ESP chip variants.
 	 */
@@ -316,6 +307,17 @@ static void esp_reset_esp(struct esp *esp)
 		break;
 	}
 
+	/* Reload the configuration registers */
+	esp_write8(esp->cfact, ESP_CFACT);
+
+	esp->prev_stp = 0;
+	esp_write8(esp->prev_stp, ESP_STP);
+
+	esp->prev_soff = 0;
+	esp_write8(esp->prev_soff, ESP_SOFF);
+
+	esp_write8(esp->neg_defp, ESP_TIMEO);
+
 	/* Eat any bitrot in the chip */
 	esp_read8(ESP_INTRPT);
 	udelay(100);