brcmfmac: add BCM4354 SDIO interface support

BCM4354 is an a/b/g/n/ac 2x2 WiFi chip. This patch adds support for it through
SDIO interface.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c

@@ -988,6 +988,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43362)},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
 		     SDIO_DEVICE_ID_BROADCOM_4335_4339)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4354)},
 	{ /* end: all zeroes */ },
 };
 MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);

drivers/net/wireless/brcm80211/brcmfmac/chip.c

@@ -504,6 +504,7 @@ static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci)
 		ci->pub.ramsize = 0x3c000;
 		break;
 	case BCM4339_CHIP_ID:
+	case BCM4354_CHIP_ID:
 		ci->pub.ramsize = 0xc0000;
 		ci->pub.rambase = 0x180000;
 		break;
@@ -1006,6 +1007,10 @@ bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
 	chip = container_of(pub, struct brcmf_chip_priv, pub);
 
 	switch (pub->chip) {
+	case BCM4354_CHIP_ID:
+		/* explicitly check SR engine enable bit */
+		pmu_cc3_mask = BIT(2);
+		/* fall-through */
 	case BCM43241_CHIP_ID:
 	case BCM4335_CHIP_ID:
 	case BCM4339_CHIP_ID:

drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c

@@ -578,6 +578,8 @@ static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
 #define BCM43362_NVRAM_NAME		"brcm/brcmfmac43362-sdio.txt"
 #define BCM4339_FIRMWARE_NAME		"brcm/brcmfmac4339-sdio.bin"
 #define BCM4339_NVRAM_NAME		"brcm/brcmfmac4339-sdio.txt"
+#define BCM4354_FIRMWARE_NAME		"brcm/brcmfmac4354-sdio.bin"
+#define BCM4354_NVRAM_NAME		"brcm/brcmfmac4354-sdio.txt"
 
 MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM43143_NVRAM_NAME);
@@ -597,6 +599,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM43362_NVRAM_NAME);
 MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME);
 MODULE_FIRMWARE(BCM4339_NVRAM_NAME);
+MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM4354_NVRAM_NAME);
 
 struct brcmf_firmware_names {
 	u32 chipid;
@@ -622,7 +626,8 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = {
 	{ BCM4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },
 	{ BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) },
 	{ BCM43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) },
-	{ BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }
+	{ BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) },
+	{ BCM4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
 };
 
 

drivers/net/wireless/brcm80211/include/brcm_hw_ids.h

@@ -43,5 +43,6 @@
 #define BCM4335_CHIP_ID		0x4335
 #define BCM43362_CHIP_ID	43362
 #define BCM4339_CHIP_ID		0x4339
+#define BCM4354_CHIP_ID		0x4354
 
 #endif				/* _BRCM_HW_IDS_H_ */

include/linux/mmc/sdio_ids.h

@@ -31,6 +31,7 @@
 #define SDIO_DEVICE_ID_BROADCOM_4334		0x4334
 #define SDIO_DEVICE_ID_BROADCOM_4335_4339	0x4335
 #define SDIO_DEVICE_ID_BROADCOM_43362		43362
+#define SDIO_DEVICE_ID_BROADCOM_4354		0x4354
 
 #define SDIO_VENDOR_ID_INTEL			0x0089
 #define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX	0x1402