Commit a7cca8ae authored by Philippe Rétornaz's avatar Philippe Rétornaz Committed by Richard Purdie

leds: Add mx31moboard MC13783 led support

Add two RGB led on mx31moboard using MC13783 led subsystem
Signed-off-by: default avatarPhilippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: default avatarRichard Purdie <rpurdie@linux.intel.com>
parent 7fdcef8a
...@@ -220,11 +220,54 @@ static struct mc13783_regulator_init_data moboard_regulators[] = { ...@@ -220,11 +220,54 @@ static struct mc13783_regulator_init_data moboard_regulators[] = {
}, },
}; };
static struct mc13783_led_platform_data moboard_led[] = {
{
.id = MC13783_LED_R1,
.name = "coreboard-led-4:red",
.max_current = 2,
},
{
.id = MC13783_LED_G1,
.name = "coreboard-led-4:green",
.max_current = 2,
},
{
.id = MC13783_LED_B1,
.name = "coreboard-led-4:blue",
.max_current = 2,
},
{
.id = MC13783_LED_R2,
.name = "coreboard-led-5:red",
.max_current = 3,
},
{
.id = MC13783_LED_G2,
.name = "coreboard-led-5:green",
.max_current = 3,
},
{
.id = MC13783_LED_B2,
.name = "coreboard-led-5:blue",
.max_current = 3,
},
};
static struct mc13783_leds_platform_data moboard_leds = {
.num_leds = ARRAY_SIZE(moboard_led),
.led = moboard_led,
.flags = MC13783_LED_SLEWLIMTC,
.abmode = MC13783_LED_AB_DISABLED,
.tc1_period = MC13783_LED_PERIOD_10MS,
.tc2_period = MC13783_LED_PERIOD_10MS,
};
static struct mc13783_platform_data moboard_pmic = { static struct mc13783_platform_data moboard_pmic = {
.regulators = moboard_regulators, .regulators = moboard_regulators,
.num_regulators = ARRAY_SIZE(moboard_regulators), .num_regulators = ARRAY_SIZE(moboard_regulators),
.leds = &moboard_leds,
.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
MC13783_USE_ADC, MC13783_USE_ADC | MC13783_USE_LED,
}; };
static struct spi_board_info moboard_spi_board_info[] __initdata = { static struct spi_board_info moboard_spi_board_info[] __initdata = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment