Commit a80763c9 authored by Leonardo Potenza's avatar Leonardo Potenza Committed by Jeff Garzik

drivers/net/cs89x0.c: compilation warning fix

Suppress the warning message about the 'netcard_portlist' defined but not used.
Signed-off-by: default avatarLeonardo Potenza <lpotenza@inwind.it>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent d9d5dcc8
...@@ -172,30 +172,30 @@ static char version[] __initdata = ...@@ -172,30 +172,30 @@ static char version[] __initdata =
them to system IRQ numbers. This mapping is card specific and is set to them to system IRQ numbers. This mapping is card specific and is set to
the configuration of the Cirrus Eval board for this chip. */ the configuration of the Cirrus Eval board for this chip. */
#ifdef CONFIG_ARCH_CLPS7500 #ifdef CONFIG_ARCH_CLPS7500
static unsigned int netcard_portlist[] __initdata = static unsigned int netcard_portlist[] __used __initdata =
{ 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static unsigned int cs8900_irq_map[] = {12,0,0,0}; static unsigned int cs8900_irq_map[] = {12,0,0,0};
#elif defined(CONFIG_SH_HICOSH4) #elif defined(CONFIG_SH_HICOSH4)
static unsigned int netcard_portlist[] __initdata = static unsigned int netcard_portlist[] __used __initdata =
{ 0x0300, 0}; { 0x0300, 0};
static unsigned int cs8900_irq_map[] = {1,0,0,0}; static unsigned int cs8900_irq_map[] = {1,0,0,0};
#elif defined(CONFIG_MACH_IXDP2351) #elif defined(CONFIG_MACH_IXDP2351)
static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
#include <asm/irq.h> #include <asm/irq.h>
#elif defined(CONFIG_ARCH_IXDP2X01) #elif defined(CONFIG_ARCH_IXDP2X01)
#include <asm/irq.h> #include <asm/irq.h>
static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_PNX010X) #elif defined(CONFIG_ARCH_PNX010X)
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/arch/gpio.h> #include <asm/arch/gpio.h>
#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */ #define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
#else #else
static unsigned int netcard_portlist[] __initdata = static unsigned int netcard_portlist[] __used __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static unsigned int cs8900_irq_map[] = {10,11,12,5}; static unsigned int cs8900_irq_map[] = {10,11,12,5};
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment