NFC: port100: Explicitly set NFC-F framing for NFC-DEP

When setting the driver framing as NFC_DIGITAL_FRAMING_NFCF_NFC_DEP it
used to be already configured as NFC_DIGITAL_FRAMING_NFCF which is the
same. So this entry was empty in the in_protocols table.
Now that the digital stack can handle PLS requests, it can be changed
on the fly from NFC_DIGITAL_FRAMING_NFCA_NFC_DEP.
This patch explicitly defines the framing configuration values for
NFC_DIGITAL_FRAMING_NFCF_NFC_DEP.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/nfc/port100.c

@@ -343,7 +343,26 @@ in_protocols[][PORT100_IN_MAX_NUM_PROTOCOLS + 1] = {
 	},
 	[NFC_DIGITAL_FRAMING_NFCF_NFC_DEP] = {
 		/* nfc_digital_framing_nfcf */
-		{ PORT100_IN_PROT_END, 0 },
+		{ PORT100_IN_PROT_INITIAL_GUARD_TIME,     18 },
+		{ PORT100_IN_PROT_ADD_CRC,                 1 },
+		{ PORT100_IN_PROT_CHECK_CRC,               1 },
+		{ PORT100_IN_PROT_MULTI_CARD,              0 },
+		{ PORT100_IN_PROT_ADD_PARITY,              0 },
+		{ PORT100_IN_PROT_CHECK_PARITY,            0 },
+		{ PORT100_IN_PROT_BITWISE_AC_RECV_MODE,    0 },
+		{ PORT100_IN_PROT_VALID_BIT_NUMBER,        8 },
+		{ PORT100_IN_PROT_CRYPTO1,                 0 },
+		{ PORT100_IN_PROT_ADD_SOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_SOF,               0 },
+		{ PORT100_IN_PROT_ADD_EOF,                 0 },
+		{ PORT100_IN_PROT_CHECK_EOF,               0 },
+		{ PORT100_IN_PROT_DEAF_TIME,               4 },
+		{ PORT100_IN_PROT_CRM,                     0 },
+		{ PORT100_IN_PROT_CRM_MIN_LEN,             0 },
+		{ PORT100_IN_PROT_T1_TAG_FRAME,            0 },
+		{ PORT100_IN_PROT_RFCA,                    0 },
+		{ PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 },
+		{ PORT100_IN_PROT_END,                     0 },
 	},
 	[NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = {
 		{ PORT100_IN_PROT_END, 0 },