Commit a8e82749 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville

b43: HT-PHY: implement switching analog

Turning it on is always done between reading PHY version and radio
version, so it was easy to find it in MMIO dumps from ndiswrapper.
Turning off is done by writing different values to the same registers.
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 4cabd425
...@@ -59,6 +59,25 @@ static void b43_phy_ht_op_free(struct b43_wldev *dev) ...@@ -59,6 +59,25 @@ static void b43_phy_ht_op_free(struct b43_wldev *dev)
phy->ht = NULL; phy->ht = NULL;
} }
static void b43_phy_ht_op_switch_analog(struct b43_wldev *dev, bool on)
{
if (on) {
b43_phy_write(dev, B43_PHY_HT_AFE_CTL2, 0x00cd);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL1, 0x0000);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL4, 0x00cd);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL3, 0x0000);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL6, 0x00cd);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL5, 0x0000);
} else {
b43_phy_write(dev, B43_PHY_HT_AFE_CTL1, 0x07ff);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL2, 0x00fd);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL3, 0x07ff);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL4, 0x00fd);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL5, 0x07ff);
b43_phy_write(dev, B43_PHY_HT_AFE_CTL6, 0x00fd);
}
}
static unsigned int b43_phy_ht_op_get_default_chan(struct b43_wldev *dev) static unsigned int b43_phy_ht_op_get_default_chan(struct b43_wldev *dev)
{ {
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
...@@ -124,7 +143,9 @@ const struct b43_phy_operations b43_phyops_ht = { ...@@ -124,7 +143,9 @@ const struct b43_phy_operations b43_phyops_ht = {
.radio_write = b43_phy_ht_op_radio_write, .radio_write = b43_phy_ht_op_radio_write,
/* /*
.software_rfkill = b43_phy_ht_op_software_rfkill, .software_rfkill = b43_phy_ht_op_software_rfkill,
*/
.switch_analog = b43_phy_ht_op_switch_analog, .switch_analog = b43_phy_ht_op_switch_analog,
/*
.switch_channel = b43_phy_ht_op_switch_channel, .switch_channel = b43_phy_ht_op_switch_channel,
*/ */
.get_default_chan = b43_phy_ht_op_get_default_chan, .get_default_chan = b43_phy_ht_op_get_default_chan,
......
...@@ -8,6 +8,13 @@ ...@@ -8,6 +8,13 @@
#define B43_PHY_HT_TABLE_DATALO 0x073 /* Table data low */ #define B43_PHY_HT_TABLE_DATALO 0x073 /* Table data low */
#define B43_PHY_HT_TABLE_DATAHI 0x074 /* Table data high */ #define B43_PHY_HT_TABLE_DATAHI 0x074 /* Table data high */
#define B43_PHY_HT_AFE_CTL1 B43_PHY_EXTG(0x110)
#define B43_PHY_HT_AFE_CTL2 B43_PHY_EXTG(0x111)
#define B43_PHY_HT_AFE_CTL3 B43_PHY_EXTG(0x114)
#define B43_PHY_HT_AFE_CTL4 B43_PHY_EXTG(0x115)
#define B43_PHY_HT_AFE_CTL5 B43_PHY_EXTG(0x118)
#define B43_PHY_HT_AFE_CTL6 B43_PHY_EXTG(0x119)
struct b43_phy_ht { struct b43_phy_ht {
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment