coresight-etm: add CoreSight ETM/PTM driver

This driver manages CoreSight ETM (Embedded Trace Macrocell) that
supports processor tracing. Currently supported version are ARM
ETMv3.x and PTM1.x.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

coresight-etm3x: adding missing error checking
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/Kconfig.debug

@@ -1376,5 +1376,14 @@ config CORESIGHT_SINK_ETBV10
 	  This enables support for the Embedded Trace Buffer version 1.0 driver
 	  that complies with the generic implementation of the component without
 	  special enhancement or added features.
+
+config CORESIGHT_SOURCE_ETM3X
+	bool "CoreSight Embedded Trace Macrocell 3.x driver"
+	select CORESIGHT_LINKS_AND_SINKS
+	help
+	  This driver provides support for processor ETM3.x and PTM1.x modules,
+	  which allows tracing the instructions that a processor is executing
+	  This is primarily useful for instruction level tracing.  Depending
+	  the ETM version data tracing may also be available.
 endif
 endmenu

drivers/coresight/Makefile

@@ -8,3 +8,4 @@ obj-$(CONFIG_CORESIGHT_SINK_TPIU) += coresight-tpiu.o
 obj-$(CONFIG_CORESIGHT_SINK_ETBV10) += coresight-etb10.o
 obj-$(CONFIG_CORESIGHT_LINKS_AND_SINKS) += coresight-funnel.o \
 					   coresight-replicator.o
+obj-$(CONFIG_CORESIGHT_SOURCE_ETM3X) += coresight-etm3x.o coresight-etm-cp14.o

drivers/coresight/coresight-etm.h

+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CORESIGHT_CORESIGHT_ETM_H
+#define _CORESIGHT_CORESIGHT_ETM_H
+
+#include <linux/spinlock.h>
+#include "coresight-priv.h"
+
+/*
+ * Device registers:
+ * 0x000 - 0x2FC: Trace         registers
+ * 0x300 - 0x314: Management    registers
+ * 0x318 - 0xEFC: Trace         registers
+ *
+ * Coresight registers
+ * 0xF00 - 0xF9C: Management    registers
+ * 0xFA0 - 0xFA4: Management    registers in PFTv1.0
+ *                Trace         registers in PFTv1.1
+ * 0xFA8 - 0xFFC: Management    registers
+ */
+
+/* Trace registers (0x000-0x2FC) */
+#define ETMCR			0x000
+#define ETMCCR			0x004
+#define ETMTRIGGER		0x008
+#define ETMSR			0x010
+#define ETMSCR			0x014
+#define ETMTSSCR		0x018
+#define ETMTECR2		0x01c
+#define ETMTEEVR		0x020
+#define ETMTECR1		0x024
+#define ETMFFLR			0x02c
+#define ETMACVRn(n)		(0x040 + (n * 4))
+#define ETMACTRn(n)		(0x080 + (n * 4))
+#define ETMCNTRLDVRn(n)		(0x140 + (n * 4))
+#define ETMCNTENRn(n)		(0x150 + (n * 4))
+#define ETMCNTRLDEVRn(n)	(0x160 + (n * 4))
+#define ETMCNTVRn(n)		(0x170 + (n * 4))
+#define ETMSQ12EVR		0x180
+#define ETMSQ21EVR		0x184
+#define ETMSQ23EVR		0x188
+#define ETMSQ31EVR		0x18c
+#define ETMSQ32EVR		0x190
+#define ETMSQ13EVR		0x194
+#define ETMSQR			0x19c
+#define ETMEXTOUTEVRn(n)	(0x1a0 + (n * 4))
+#define ETMCIDCVRn(n)		(0x1b0 + (n * 4))
+#define ETMCIDCMR		0x1bc
+#define ETMIMPSPEC0		0x1c0
+#define ETMIMPSPEC1		0x1c4
+#define ETMIMPSPEC2		0x1c8
+#define ETMIMPSPEC3		0x1cc
+#define ETMIMPSPEC4		0x1d0
+#define ETMIMPSPEC5		0x1d4
+#define ETMIMPSPEC6		0x1d8
+#define ETMIMPSPEC7		0x1dc
+#define ETMSYNCFR		0x1e0
+#define ETMIDR			0x1e4
+#define ETMCCER			0x1e8
+#define ETMEXTINSELR		0x1ec
+#define ETMTESSEICR		0x1f0
+#define ETMEIBCR		0x1f4
+#define ETMTSEVR		0x1f8
+#define ETMAUXCR		0x1fc
+#define ETMTRACEIDR		0x200
+#define ETMVMIDCVR		0x240
+/* Management registers (0x300-0x314) */
+#define ETMOSLAR		0x300
+#define ETMOSLSR		0x304
+#define ETMOSSRR		0x308
+#define ETMPDCR			0x310
+#define ETMPDSR			0x314
+#define ETM_MAX_ADDR_CMP	16
+#define ETM_MAX_CNTR		4
+#define ETM_MAX_CTXID_CMP	3
+
+/* Register definition */
+/* ETMCR - 0x00 */
+#define ETMCR_PWD_DWN		BIT(0)
+#define ETMCR_STALL_MODE	BIT(7)
+#define ETMCR_ETM_PRG		BIT(10)
+#define ETMCR_ETM_EN		BIT(11)
+#define ETMCR_CYC_ACC		BIT(12)
+#define ETMCR_CTXID_SIZE	(BIT(14)|BIT(15))
+#define ETMCR_TIMESTAMP_EN	BIT(28)
+/* ETMCCR - 0x04 */
+#define ETMCCR_FIFOFULL		BIT(23)
+/* ETMPDCR - 0x310 */
+#define ETMPDCR_PWD_UP		BIT(3)
+/* ETMTECR1 - 0x024 */
+#define ETMTECR1_ADDR_COMP_1	BIT(0)
+#define ETMTECR1_INC_EXC	BIT(24)
+#define ETMTECR1_START_STOP	BIT(25)
+/* ETMCCER - 0x1E8 */
+#define ETMCCER_TIMESTAMP	BIT(22)
+
+#define ETM_MODE_EXCLUDE	BIT(0)
+#define ETM_MODE_CYCACC		BIT(1)
+#define ETM_MODE_STALL		BIT(2)
+#define ETM_MODE_TIMESTAMP	BIT(3)
+#define ETM_MODE_CTXID		BIT(4)
+#define ETM_MODE_ALL		0x1f
+
+#define ETM_SQR_MASK		0x3
+#define ETM_TRACEID_MASK	0x3f
+#define ETM_EVENT_MASK		0x1ffff
+#define ETM_SYNC_MASK		0xfff
+#define ETM_ALL_MASK		0xffffffff
+
+#define ETMSR_PROG_BIT		1
+#define ETM_SEQ_STATE_MAX_VAL	(0x2)
+#define PORT_SIZE_MASK		(GENMASK(21, 21) | GENMASK(6, 4))
+
+#define ETM_HARD_WIRE_RES_A	/* Hard wired, always true */	\
+				((0x0f << 0)	|		\
+				/* Resource index A */		\
+				(0x06 << 4))
+
+#define ETM_ADD_COMP_0		/* Single addr comparator 1 */	\
+				((0x00 << 7)	|		\
+				/* Resource index B */		\
+				(0x00 << 11))
+
+#define ETM_EVENT_NOT_A		BIT(14) /* NOT(A) */
+
+#define ETM_DEFAULT_EVENT_VAL	(ETM_HARD_WIRE_RES_A	|	\
+				 ETM_ADD_COMP_0		|	\
+				 ETM_EVENT_NOT_A)
+/**
+ * struct etm_drvdata - specifics associated to an ETM component
+ * @base:	memory mapped base address for this component.
+ * @dev:	the device entity associated to this component.
+ * @csdev:	component vitals needed by the framework.
+ * @clk:	the clock this component is associated to.
+ * @spinlock:	only one at a time pls.
+ * @cpu:	the cpu this component is affined to.
+ * @port_size:	port size as reported by ETMCR bit 4-6 and 21.
+ * @arch:	ETM/PTM version number.
+ * @use_cpu14:	true if management registers need to be accessed via CP14.
+ * @enable:	is this ETM/PTM currently tracing.
+ * @sticky_enable: true if ETM base configuration has been done.
+ * @boot_enable:true if we should start tracing at boot time.
+ * @os_unlock:	true if access to management registers is allowed.
+ * @nr_addr_cmp:Number of pairs of address comparators as found in ETMCCR.
+ * @nr_cntr:	Number of counters as found in ETMCCR bit 13-15.
+ * @nr_ext_inp:	Number of external input as found in ETMCCR bit 17-19.
+ * @nr_ext_out:	Number of external output as found in ETMCCR bit 20-22.
+ * @nr_ctxid_cmp: Number of contextID comparators as found in ETMCCR bit 24-25.
+ * @etmccr:	value of register ETMCCR.
+ * @etmccer:	value of register ETMCCER.
+ * @traceid:	value of the current ID for this component.
+ * @mode:	controls various modes supported by this ETM/PTM.
+ * @ctrl:	used in conjunction with @mode.
+ * @trigger_event: setting for register ETMTRIGGER.
+ * @startstop_ctrl: setting for register ETMTSSCR.
+ * @enable_event: setting for register ETMTEEVR.
+ * @enable_ctrl1: setting for register ETMTECR1.
+ * @fifofull_level: setting for register ETMFFLR.
+ * @addr_idx:	index for the address comparator selection.
+ * @addr_val:	value for address comparator register.
+ * @addr_acctype: access type for address comparator register.
+ * @addr_type:	current status of the comparator register.
+ * @cntr_idx:	index for the counter register selection.
+ * @cntr_rld_val: reload value of a counter register.
+ * @cntr_event:	control for counter enable register.
+ * @cntr_rld_event: value for counter reload event register.
+ * @cntr_val:	counter value register.
+ * @seq_12_event: event causing the transition from 1 to 2.
+ * @seq_21_event: event causing the transition from 2 to 1.
+ * @seq_23_event: event causing the transition from 2 to 3.
+ * @seq_31_event: event causing the transition from 3 to 1.
+ * @seq_32_event: event causing the transition from 3 to 2.
+ * @seq_13_event: event causing the transition from 1 to 3.
+ * @seq_curr_state: current value of the sequencer register.
+ * @ctxid_idx: index for the context ID registers.
+ * @ctxid_val: value for the context ID to trigger on.
+ * @ctxid_mask: mask applicable to all the context IDs.
+ * @sync_freq:	Synchronisation frequency.
+ * @timestamp_event: Defines an event that requests the insertion
+		     of a timestamp into the trace stream.
+ */
+struct etm_drvdata {
+	void __iomem			*base;
+	struct device			*dev;
+	struct coresight_device		*csdev;
+	struct clk			*clk;
+	spinlock_t			spinlock;
+	int				cpu;
+	int				port_size;
+	u8				arch;
+	bool				use_cp14;
+	bool				enable;
+	bool				sticky_enable;
+	bool				boot_enable;
+	bool				os_unlock;
+	u8				nr_addr_cmp;
+	u8				nr_cntr;
+	u8				nr_ext_inp;
+	u8				nr_ext_out;
+	u8				nr_ctxid_cmp;
+	u32				etmccr;
+	u32				etmccer;
+	u32				traceid;
+	u32				mode;
+	u32				ctrl;
+	u32				trigger_event;
+	u32				startstop_ctrl;
+	u32				enable_event;
+	u32				enable_ctrl1;
+	u32				fifofull_level;
+	u8				addr_idx;
+	u32				addr_val[ETM_MAX_ADDR_CMP];
+	u32				addr_acctype[ETM_MAX_ADDR_CMP];
+	u32				addr_type[ETM_MAX_ADDR_CMP];
+	u8				cntr_idx;
+	u32				cntr_rld_val[ETM_MAX_CNTR];
+	u32				cntr_event[ETM_MAX_CNTR];
+	u32				cntr_rld_event[ETM_MAX_CNTR];
+	u32				cntr_val[ETM_MAX_CNTR];
+	u32				seq_12_event;
+	u32				seq_21_event;
+	u32				seq_23_event;
+	u32				seq_31_event;
+	u32				seq_32_event;
+	u32				seq_13_event;
+	u32				seq_curr_state;
+	u8				ctxid_idx;
+	u32				ctxid_val[ETM_MAX_CTXID_CMP];
+	u32				ctxid_mask;
+	u32				sync_freq;
+	u32				timestamp_event;
+};
+
+enum etm_addr_type {
+	ETM_ADDR_TYPE_NONE,
+	ETM_ADDR_TYPE_SINGLE,
+	ETM_ADDR_TYPE_RANGE,
+	ETM_ADDR_TYPE_START,
+	ETM_ADDR_TYPE_STOP,
+};
+#endif