Skip to content

L
linux
Commit a9d61e9e authored by Helmut Schaa's avatar Helmut Schaa Committed by John W. Linville
Browse files
Options

rt2x00: Convert rt2800pci to use tasklets 

Fix interrupt processing on slow machines by using individual tasklets
for each different device interrupt. This ensures that while a RX or TX
status tasklet is scheduled only the according device interrupt is
masked and other interrupts such as TBTT can still be processed.

Also, this allows us to use tasklet_hi_schedule for TBTT and PRETBTT
processing which is required to not send out beacons with a wrong DTIM
count (due to delayed periodic beacon updates). Furthermore, this
improves the latency between the TBTT and sending out buffered multi-
and broadcast traffic.

As a nice bonus, the interrupt handling overhead is reduced such that
rt2800pci gains around 25% more throuhput on a rt3052 MIPS board.
Signed-off-by: default avatarHelmut Schaa <helmut.schaa@googlemail.com>
Acked-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent c8e15a1e
Show whitespace changes
Inline Side-by-side
Showing with 114 additions and 59 deletions
drivers/net/wireless/rt2x00/rt2800pci.c
View file @ a9d61e9e
......@@ -200,6 +200,13 @@ static void rt2800pci_start_queue(struct data_queue *queue)
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
break;
case QID_BEACON:
/*
* Allow beacon tasklets to be scheduled for periodic
* beacon updates.
*/
tasklet_enable(&rt2x00dev->tbtt_tasklet);
tasklet_enable(&rt2x00dev->pretbtt_tasklet);
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
......@@ -258,6 +265,12 @@ static void rt2800pci_stop_queue(struct data_queue *queue)
rt2800_register_read(rt2x00dev, INT_TIMER_EN, &reg);
rt2x00_set_field32(&reg, INT_TIMER_EN_PRE_TBTT_TIMER, 0);
rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg);
/*
* Wait for tbtt tasklets to finish.
*/
tasklet_disable(&rt2x00dev->tbtt_tasklet);
tasklet_disable(&rt2x00dev->pretbtt_tasklet);
break;
default:
break;
......@@ -408,6 +421,7 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
int mask = (state == STATE_RADIO_IRQ_ON) ||
(state == STATE_RADIO_IRQ_ON_ISR);
u32 reg;
unsigned long flags;
/*
* When interrupts are being enabled, the interrupt registers
......@@ -417,10 +431,16 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
/*
* Enable tasklets. The beacon related tasklets are
* enabled when the beacon queue is started.
*/
tasklet_enable(&rt2x00dev->txstatus_tasklet);
} else if (state == STATE_RADIO_IRQ_OFF)
tasklet_disable(&rt2x00dev->txstatus_tasklet);
tasklet_enable(&rt2x00dev->rxdone_tasklet);
tasklet_enable(&rt2x00dev->autowake_tasklet);
}
spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
rt2800_register_read(rt2x00dev, INT_MASK_CSR, &reg);
rt2x00_set_field32(&reg, INT_MASK_CSR_RXDELAYINT, 0);
rt2x00_set_field32(&reg, INT_MASK_CSR_TXDELAYINT, 0);
......@@ -441,6 +461,17 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&reg, INT_MASK_CSR_RX_COHERENT, 0);
rt2x00_set_field32(&reg, INT_MASK_CSR_TX_COHERENT, 0);
rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
if (state == STATE_RADIO_IRQ_OFF) {
/*
* Ensure that all tasklets are finished before
* disabling the interrupts.
*/
tasklet_disable(&rt2x00dev->txstatus_tasklet);
tasklet_disable(&rt2x00dev->rxdone_tasklet);
tasklet_disable(&rt2x00dev->autowake_tasklet);
}
}
static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
......@@ -721,45 +752,60 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
}
}
static void rt2800pci_txstatus_tasklet(unsigned long data)
static void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
struct rt2x00_field32 irq_field)
{
rt2800pci_txdone((struct rt2x00_dev *)data);
unsigned long flags;
u32 reg;
/*
* Enable a single interrupt. The interrupt mask register
* access needs locking.
*/
spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
rt2800_register_read(rt2x00dev, INT_MASK_CSR, &reg);
rt2x00_set_field32(&reg, irq_field, 1);
rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
}
static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance)
static void rt2800pci_txstatus_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
u32 reg = rt2x00dev->irqvalue[0];
rt2800pci_txdone((struct rt2x00_dev *)data);
/*
* 1 - Pre TBTT interrupt.
* No need to enable the tx status interrupt here as we always
* leave it enabled to minimize the possibility of a tx status
* register overflow. See comment in interrupt handler.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
}
static void rt2800pci_pretbtt_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
rt2x00lib_pretbtt(rt2x00dev);
rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT);
}
/*
* 2 - Beacondone interrupt.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
static void rt2800pci_tbtt_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
rt2x00lib_beacondone(rt2x00dev);
rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
}
/*
* 3 - Rx ring done interrupt.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
static void rt2800pci_rxdone_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
rt2x00pci_rxdone(rt2x00dev);
rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
}
/*
* 4 - Auto wakeup interrupt.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
static void rt2800pci_autowake_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
rt2800pci_wakeup(rt2x00dev);
/* Enable interrupts again. */
rt2x00dev->ops->lib->set_device_state(rt2x00dev,
STATE_RADIO_IRQ_ON_ISR);
return IRQ_HANDLED;
rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_AUTO_WAKEUP);
}
static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
......@@ -805,8 +851,8 @@ static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
u32 reg;
irqreturn_t ret = IRQ_HANDLED;
u32 reg, mask;
unsigned long flags;
/* Read status and ACK all interrupts */
rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
......@@ -818,38 +864,44 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
rt2800pci_txstatus_interrupt(rt2x00dev);
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT) ||
rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT) ||
rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE) ||
rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) {
/*
* All other interrupts are handled in the interrupt thread.
* Store irqvalue for use in the interrupt thread.
* Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits
* for interrupts and interrupt masks we can just use the value of
* INT_SOURCE_CSR to create the interrupt mask.
*/
rt2x00dev->irqvalue[0] = reg;
mask = ~reg;
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
rt2800pci_txstatus_interrupt(rt2x00dev);
/*
* Disable interrupts, will be enabled again in the
* interrupt thread.
* Never disable the TX_FIFO_STATUS interrupt.
*/
rt2x00dev->ops->lib->set_device_state(rt2x00dev,
STATE_RADIO_IRQ_OFF_ISR);
rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1);
}
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet);
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
tasklet_schedule(&rt2x00dev->rxdone_tasklet);
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
tasklet_schedule(&rt2x00dev->autowake_tasklet);
/*
* Leave the TX_FIFO_STATUS interrupt enabled to not lose any
* tx status reports.
* Disable all interrupts for which a tasklet was scheduled right now,
* the tasklet will reenable the appropriate interrupts.
*/
spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
rt2800_register_read(rt2x00dev, INT_MASK_CSR, &reg);
rt2x00_set_field32(&reg, INT_MASK_CSR_TX_FIFO_STATUS, 1);
reg &= mask;
rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
ret = IRQ_WAKE_THREAD;
}
return ret;
return IRQ_HANDLED;
}
/*
......@@ -964,8 +1016,11 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = {
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.irq_handler = rt2800pci_interrupt,
.irq_handler_thread = rt2800pci_interrupt_thread,
.txstatus_tasklet = rt2800pci_txstatus_tasklet,
.pretbtt_tasklet = rt2800pci_pretbtt_tasklet,
.tbtt_tasklet = rt2800pci_tbtt_tasklet,
.rxdone_tasklet = rt2800pci_rxdone_tasklet,
.autowake_tasklet = rt2800pci_autowake_tasklet,
.probe_hw = rt2800pci_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
.check_firmware = rt2800_check_firmware,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7