ath9k_hw: Fix a reset failure on AR9382 (2x2).

AR9382 needs to be configured for the correct chain mask before
running AGC/TxIQ caliberation. Otherwise reset would fail.
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_calib.c

@@ -718,10 +718,17 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 			       struct ath9k_channel *chan)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
+	int val;
 
+	val = REG_READ(ah, AR_ENT_OTP);
+	ath_print(common, ATH_DBG_CALIBRATE, "ath9k: AR_ENT_OTP 0x%x\n", val);
+
+	if (val & AR_ENT_OTP_CHAIN2_DISABLE)
+		ar9003_hw_set_chain_masks(ah, 0x3, 0x3);
+	else
 		/*
-	 * 0x7 = 0b111 , AR9003 needs to be configured for 3-chain mode before
-	 * running AGC/TxIQ cals
+		 * 0x7 = 0b111 , AR9003 needs to be configured for 3-chain
+		 * mode before running AGC/TxIQ cals
 		 */
 		ar9003_hw_set_chain_masks(ah, 0x7, 0x7);
 

drivers/net/wireless/ath/ath9k/reg.h

@@ -1065,6 +1065,8 @@ enum {
 #define AR_INTR_PRIO_ASYNC_MASK   0x40c8
 #define AR_INTR_PRIO_SYNC_MASK    0x40cc
 #define AR_INTR_PRIO_ASYNC_ENABLE 0x40d4
+#define AR_ENT_OTP		  0x40d8
+#define AR_ENT_OTP_CHAIN2_DISABLE               0x00020000
 
 #define AR_RTC_9300_PLL_DIV          0x000003ff
 #define AR_RTC_9300_PLL_DIV_S        0