Skip to content

L
linux
Commit a9da4f7e authored by Russell King's avatar Russell King Committed by Russell King
Browse files
Options

Merge branches 'pxa-ian' and 'pxa-xm270' into pxa 

Conflicts:

	MAINTAINERS
parents 67f5cd0f 13f75582 03fe6692
Hide whitespace changes
Inline Side-by-side
Showing with 767 additions and 412 deletions
MAINTAINERS
View file @ a9da4f7e
......@@ -475,28 +475,34 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CORGI MACHINE SUPPORT
P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
P: Stefan Schmidt
M: stefan@openezx.org
P: Harald Welte
M: laforge@openezx.org
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
P: Lennert Buytenhek
M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
P: Stefan Schmidt
M: stefan@openezx.org
P: Harald Welte
M: laforge@openezx.org
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
ARM/GUMSTIX MACHINE SUPPORT
P: Steve Sakoman
M: sakoman@gmail.com
......
arch/arm/common/sa1111.c
View file @ a9da4f7e
......@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
if (!sachip)
return -ENOMEM;
sachip->clk = clk_get(me, "GPIO27_CLK");
sachip->clk = clk_get(me, "SA1111_CLK");
if (!sachip->clk) {
ret = PTR_ERR(sachip->clk);
goto err_free;
......
arch/arm/mach-pxa/clock.c
View file @ a9da4f7e
......@@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
EXPORT_SYMBOL(clk_get_rate);
static void clk_gpio27_enable(struct clk *clk)
{
pxa_gpio_mode(GPIO11_3_6MHz_MD);
}
static void clk_gpio27_disable(struct clk *clk)
{
}
static const struct clkops clk_gpio27_ops = {
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
};
void clk_cken_enable(struct clk *clk)
{
CKEN |= 1 << clk->cken;
......@@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
.disable = clk_cken_disable,
};
static struct clk common_clks[] = {
{
.name = "GPIO27_CLK",
.ops = &clk_gpio27_ops,
.rate = 3686400,
},
};
void clks_register(struct clk *clks, size_t num)
{
int i;
......@@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
list_add(&clks[i].node, &clocks);
mutex_unlock(&clocks_mutex);
}
static int __init clk_init(void)
{
clks_register(common_clks, ARRAY_SIZE(common_clks));
return 0;
}
arch_initcall(clk_init);
arch/arm/mach-pxa/clock.h
View file @ a9da4f7e
......@@ -47,6 +47,15 @@ struct clk {
.other = _other, \
}
#define INIT_CLK(_name, _ops, _rate, _delay, _dev) \
{ \
.name = _name, \
.dev = _dev, \
.ops = _ops, \
.rate = _rate, \
.delay = _delay, \
}
extern const struct clkops clk_cken_ops;
void clk_cken_enable(struct clk *clk);
......
arch/arm/mach-pxa/cm-x270-pci.c
View file @ a9da4f7e
......@@ -5,7 +5,7 @@
*
* Bits taken from various places.
*
* Copyright (C) 2007 Compulab, Ltd.
* Copyright (C) 2007, 2008 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
......@@ -19,16 +19,16 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/mach/pci.h>
#include <asm/arch/cm-x270.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
unsigned long it8152_base_address = CMX270_IT8152_VIRT;
unsigned long it8152_base_address;
static int cmx270_it8152_irq_gpio;
/*
* Only first 64MB of memory can be accessed via PCI.
......@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
unsigned int sz = SZ_64M >> PAGE_SHIFT;
if (machine_is_armcore()) {
pr_info("Adjusting zones for CM-x270\n");
pr_info("Adjusting zones for CM-X270\n");
/*
* Only adjust if > 64M on current system
......@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
it8152_irq_demux(irq, desc);
}
void __cmx270_pci_init_irq(void)
void __cmx270_pci_init_irq(int irq_gpio)
{
it8152_init_irq();
pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
cmx270_it8152_irq_demux);
cmx270_it8152_irq_gpio = irq_gpio;
set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
}
#ifdef CONFIG_PM
......@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/*
Here comes the ugly part. The routing is baseboard specific,
but defining a platform for each possible base of CM-x270 is
unrealistic. Here we keep mapping for ATXBase and SB-x270.
but defining a platform for each possible base of CM-X270 is
unrealistic. Here we keep mapping for ATXBase and SB-X270.
*/
/* ATXBASE PCI slot */
if (slot == 7)
......
arch/arm/mach-pxa/cm-x270-pci.h
View file @ a9da4f7e
extern void __cmx270_pci_init_irq(void);
extern void __cmx270_pci_init_irq(int irq_gpio);
extern void __cmx270_pci_suspend(void);
extern void __cmx270_pci_resume(void);
#ifdef CONFIG_PCI
#define cmx270_pci_init_irq __cmx270_pci_init_irq
#define cmx270_pci_suspend __cmx270_pci_suspend
#define cmx270_pci_resume __cmx270_pci_resume
#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
#else
#define cmx270_pci_init_irq() do {} while (0)
#define cmx270_pci_suspend() do {} while (0)
#define cmx270_pci_resume() do {} while (0)
#define cmx270_pci_init_irq(x) do {} while (0)
#define cmx270_pci_suspend(x) do {} while (0)
#define cmx270_pci_resume(x) do {} while (0)
#endif
arch/arm/mach-pxa/cm-x270.c
View file @ a9da4f7e
/*
* linux/arch/arm/mach-pxa/cm-x270.c
*
* Copyright (C) 2007 CompuLab, Ltd.
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
......@@ -9,44 +9,156 @@
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/pm.h>
#include <linux/fb.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/sysdev.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/serial_8250.h>
#include <video/mbxfb.h>
#include <linux/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
#include <asm/arch/bitfield.h>
#include <asm/arch/cm-x270.h>
#include <asm/hardware/it8152.h>
#include "generic.h"
#include "cm-x270-pci.h"
/* virtual addresses for statically mapped regions */
#define CMX270_VIRT_BASE (0xe8000000)
#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
static struct resource cmx270_dm9k_resource[] = {
/* GPIO IRQ usage */
#define GPIO10_ETHIRQ (10)
#define GPIO22_IT8152_IRQ (22)
#define GPIO83_MMC_IRQ (83)
#define GPIO95_GFXIRQ (95)
#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ)
#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ)
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
static unsigned long cmx270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO98_AC97_SYSCLK,
GPIO113_AC97_nRESET,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* MCI controller */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* SSP1 */
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO87_SSP2_TXD,
GPIO88_SSP2_RXD,
/* PC Card */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* SDRAM and local bus */
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO79_nCS_3,
GPIO80_nCS_4,
GPIO33_nCS_5,
GPIO49_nPWE,
GPIO18_RDY,
/* GPIO */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
GPIO53_GPIO, /* PC card reset */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
GPIO89_GPIO, /* NAND Ready/Busy */
/* interrupts */
GPIO10_GPIO, /* DM9000 interrupt */
GPIO83_GPIO, /* MMC card detect */
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource cmx270_dm9000_resource[] = {
[0] = {
.start = DM9000_PHYS_BASE,
.end = DM9000_PHYS_BASE + 4,
......@@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
}
};
/* for the moment we limit ourselves to 32bit IO until some
* better IO routines can be written and tested
*/
static struct dm9000_plat_data cmx270_dm9k_platdata = {
static struct dm9000_plat_data cmx270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
/* Ethernet device */
static struct platform_device cmx270_device_dm9k = {
static struct platform_device cmx270_dm9000_device = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(cmx270_dm9k_resource),
.resource = cmx270_dm9k_resource,
.num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
.resource = cmx270_dm9000_resource,
.dev = {
.platform_data = &cmx270_dm9k_platdata,
.platform_data = &cmx270_dm9000_platdata,
}
};
/* touchscreen controller */
static void __init cmx270_init_dm9000(void)
{
platform_device_register(&cmx270_dm9000_device);
}
#else
static inline void cmx270_init_dm9000(void) {}
#endif
/* UCB1400 touchscreen controller */
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static struct platform_device cmx270_ts_device = {
.name = "ucb1400_ts",
.id = -1,
};
/* RTC */
static void __init cmx270_init_touchscreen(void)
{
platform_device_register(&cmx270_ts_device);
}
#else
static inline void cmx270_init_touchscreen(void) {}
#endif
/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource cmx270_v3020_resource[] = {
[0] = {
.start = RTC_PHYS_BASE,
......@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
}
};
/*
* CM-X270 LEDs
*/
static void __init cmx270_init_rtc(void)
{
platform_device_register(&cmx270_rtc_device);
}
#else
static inline void cmx270_init_rtc(void) {}
#endif
/* CM-X270 LEDs */
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cmx270_leds[] = {
[0] = {
.name = "cm-x270:red",
.default_trigger = "nand-disk",
.gpio = 93,
.active_low = 1,
},
[1] = {
.name = "cm-x270:green",
.default_trigger = "heartbeat",
.gpio = 94,
.active_low = 1,
},
};
static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
.num_leds = ARRAY_SIZE(cmx270_leds),
.leds = cmx270_leds,
};
static struct platform_device cmx270_led_device = {
.name = "cm-x270-led",
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &cmx270_gpio_led_pdata,
},
};
static void __init cmx270_init_leds(void)
{
platform_device_register(&cmx270_led_device);
}
#else
static inline void cmx270_init_leds(void) {}
#endif
/* 2700G graphics */
#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
static u64 fb_dma_mask = ~(u64)0;
static struct resource cmx270_2700G_resource[] = {
/* frame buffer memory including ODFB and External SDRAM */
[0] = {
.start = MARATHON_PHYS,
.end = MARATHON_PHYS + 0x02000000,
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 0x01ffffff,
.flags = IORESOURCE_MEM,
},
/* Marathon registers */
[1] = {
.start = MARATHON_PHYS + 0x03fe0000,
.end = MARATHON_PHYS + 0x03ffffff,
.start = PXA_CS2_PHYS + 0x03fe0000,
.end = PXA_CS2_PHYS + 0x03ffffff,
.flags = IORESOURCE_MEM,
},
};
......@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
.id = -1,
};
static u64 ata_dma_mask = ~(u64)0;
static struct platform_device cmx270_ata = {
.name = "pata_cm_x270",
.id = -1,
.dev = {
.dma_mask = &ata_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
};
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
&cmx270_device_dm9k,
&cmx270_rtc_device,
&cmx270_2700G,
&cmx270_led_device,
&cmx270_ts_device,
&cmx270_ata,
};
/* Map PCI companion and IDE/General Purpose CS statically */
static struct map_desc cmx270_io_desc[] __initdata = {
[0] = { /* IDE/general purpose space */
.virtual = CMX270_IDE104_VIRT,
.pfn = __phys_to_pfn(CMX270_IDE104_PHYS),
.length = SZ_64M - SZ_8M,
.type = MT_DEVICE
},
[1] = { /* PCI bridge */
.virtual = CMX270_IT8152_VIRT,
.pfn = __phys_to_pfn(CMX270_IT8152_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
},
};
static void __init cmx270_init_2700G(void)
{
platform_device_register(&cmx270_2700G);
}
#else
static inline void cmx270_init_2700G(void) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
/*
Display definitions
keep these for backwards compatibility, although symbolic names (as
......@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
*/
__setup("monitor=", cmx270_set_display);
static void __init cmx270_init_display(void)
{
set_pxa_fb_info(cmx270_display);
}
#else
static inline void cmx270_init_display(void) {}
#endif
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int cmx270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
......@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
.init = cmx270_ohci_init,
};
static void __init cmx270_init_ohci(void)
{
pxa_set_ohci_info(&cmx270_ohci_platform_data);
}
#else
static inline void cmx270_init_ohci(void) {}
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int cmx270_mci_init(struct device *dev,
irq_handler_t cmx270_detect_int,
void *data)
{
int err;
/*
* setup GPIO for PXA27x MMC controller
*/
pxa_gpio_mode(GPIO32_MMCCLK_MD);
pxa_gpio_mode(GPIO112_MMCCMD_MD);
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
/* SB-X270 uses GPIO105 as SD power enable */
pxa_gpio_mode(105 | GPIO_OUT);
err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
if (err) {
dev_warn(dev, "power gpio unavailable\n");
return err;
}
/* card detect IRQ on GPIO 83 */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
gpio_direction_output(GPIO105_MMC_POWER, 0);
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err)
printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
if (err) {
gpio_free(GPIO105_MMC_POWER);
dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
}
return err;
}
......@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask) {
printk(KERN_DEBUG "%s: on\n", __func__);
GPCR(105) = GPIO_bit(105);
dev_dbg(dev, "power on\n");
gpio_set_value(GPIO105_MMC_POWER, 0);
} else {
GPSR(105) = GPIO_bit(105);
printk(KERN_DEBUG "%s: off\n", __func__);
gpio_set_value(GPIO105_MMC_POWER, 1);
dev_dbg(dev, "power off\n");
}
}
static void cmx270_mci_exit(struct device *dev, void *data)
{
free_irq(CMX270_MMC_IRQ, data);
gpio_free(GPIO105_MMC_POWER);
}
static struct pxamci_platform_data cmx270_mci_platform_data = {
......@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
.exit = cmx270_mci_exit,
};
static void __init cmx270_init_mmc(void)
{
pxa_set_mci_info(&cmx270_mci_platform_data);
}
#else
static inline void cmx270_init_mmc(void) {}
#endif
#ifdef CONFIG_PM
static unsigned long sleep_save_msc[10];
......@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
static int __init cmx270_pm_init(void) { return 0; }
#endif
static void __init cmx270_init(void)
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init cmx270_init_ac97(void)
{
cmx270_pm_init();
set_pxa_fb_info(cmx270_display);
/* register CM-X270 platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
}
#else
static inline void cmx270_init_ac97(void) {}
#endif
/* set MCI and OHCI platform parameters */
pxa_set_mci_info(&cmx270_mci_platform_data);
pxa_set_ohci_info(&cmx270_ohci_platform_data);
/* This enables the STUART */
pxa_gpio_mode(GPIO46_STRXD_MD);
pxa_gpio_mode(GPIO47_STTXD_MD);
static void __init cmx270_init(void)
{
cmx270_pm_init();
/* This enables the BTUART */
pxa_gpio_mode(GPIO42_BTRXD_MD);
pxa_gpio_mode(GPIO43_BTTXD_MD);
pxa_gpio_mode(GPIO44_BTCTS_MD);
pxa_gpio_mode(GPIO45_BTRTS_MD);
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
cmx270_init_dm9000();
cmx270_init_rtc();
cmx270_init_display();
cmx270_init_mmc();
cmx270_init_ohci();
cmx270_init_ac97();
cmx270_init_touchscreen();
cmx270_init_leds();
cmx270_init_2700G();
}
static void __init cmx270_init_irq(void)
{
pxa27x_init_irq();
cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
}
cmx270_pci_init_irq();
#ifdef CONFIG_PCI
/* Map PCI companion statically */
static struct map_desc cmx270_io_desc[] __initdata = {
[0] = { /* PCI bridge */
.virtual = CMX270_IT8152_VIRT,
.pfn = __phys_to_pfn(PXA_CS4_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
},
};
/* Setup interrupt for dm9000 */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
static void __init cmx270_map_io(void)
{
pxa_map_io();
iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
/* Setup interrupt for 2700G */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
it8152_base_address = CMX270_IT8152_VIRT;
}
#else
static void __init cmx270_map_io(void)
{
pxa_map_io();
iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
}
#endif
MACHINE_START(ARMCORE, "Compulab CM-x270")
.boot_params = 0xa0000100,
......
arch/arm/mach-pxa/em-x270.c
View file @ a9da4f7e
/*
* Support for CompuLab EM-x270 platform
* Support for CompuLab EM-X270 platform
*
* Copyright (C) 2007 CompuLab, Ltd.
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
......@@ -14,31 +14,159 @@
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
#include <asm/arch/bitfield.h>
#include <asm/arch/pxa27x_keypad.h>
#include "generic.h"
/* GPIO IRQ usage */
#define EM_X270_MMC_PD (105)
#define EM_X270_ETHIRQ IRQ_GPIO(41)
#define EM_X270_MMC_IRQ IRQ_GPIO(13)
#define GPIO41_ETHIRQ (41)
#define GPIO13_MMC_CD (13)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
/* NAND control GPIOs */
#define GPIO11_NAND_CS (11)
#define GPIO56_NAND_RB (56)
static unsigned long em_x270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO98_AC97_SYSCLK,
GPIO113_AC97_nRESET,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* MCI controller */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* QCI */
GPIO84_CIF_FV,
GPIO25_CIF_LV,
GPIO53_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO81_CIF_DD_0,
GPIO55_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO50_CIF_DD_3,
GPIO52_CIF_DD_4,
GPIO48_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO12_CIF_DD_7,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* Keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
GPIO22_KP_MKOUT_7,
/* SSP1 */
GPIO26_SSP1_RXD,
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO57_SSP1_TXD,
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
/* SDRAM and local bus */
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO79_nCS_3,
GPIO80_nCS_4,
GPIO49_nPWE,
GPIO18_RDY,
/* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
GPIO56_GPIO, /* NAND Ready/Busy */
/* interrupts */
GPIO13_GPIO, /* MMC card detect */
GPIO41_GPIO, /* DM9000 interrupt */
};
static struct resource em_x270_dm9k_resource[] = {
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource em_x270_dm9000_resource[] = {
[0] = {
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 3,
......@@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
}
};
/* for the moment we limit ourselves to 32bit IO until some
* better IO routines can be written and tested
*/
static struct dm9000_plat_data em_x270_dm9k_platdata = {
static struct dm9000_plat_data em_x270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
/* Ethernet device */
static struct platform_device em_x270_dm9k = {
static struct platform_device em_x270_dm9000 = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(em_x270_dm9k_resource),
.resource = em_x270_dm9k_resource,
.num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
.resource = em_x270_dm9000_resource,
.dev = {
.platform_data = &em_x270_dm9k_platdata,
.platform_data = &em_x270_dm9000_platdata,
}
};
/* WM9712 touchscreen controller. Hopefully the driver will make it to
* the mainstream sometime */
static struct platform_device em_x270_ts = {
.name = "wm97xx-ts",
.id = -1,
};
static void __init em_x270_init_dm9000(void)
{
platform_device_register(&em_x270_dm9000);
}
#else
static inline void em_x270_init_dm9000(void) {}
#endif
/* RTC */
/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource em_x270_v3020_resource[] = {
[0] = {
.start = PXA_CS4_PHYS,
......@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
}
};
/* NAND flash */
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (56)
static void __init em_x270_init_rtc(void)
{
platform_device_register(&em_x270_rtc);
}
#else
static inline void em_x270_init_rtc(void) {}
#endif
/* NAND flash */
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static inline void nand_cs_on(void)
{
GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO11_NAND_CS, 0);
}
static void nand_cs_off(void)
{
dsb();
GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO11_NAND_CS, 1);
}
/* hardware specific access to control-lines */
......@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
{
dsb();
return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
return gpio_get_value(GPIO56_NAND_RB);
}
static struct mtd_partition em_x270_partition_info[] = {
......@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
}
};
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
&em_x270_dm9k,
&em_x270_ts,
&em_x270_rtc,
&em_x270_nand,
};
static void __init em_x270_init_nand(void)
{
int err;
err = gpio_request(GPIO11_NAND_CS, "NAND CS");
if (err) {
pr_warning("EM-X270: failed to request NAND CS gpio\n");
return;
}
gpio_direction_output(GPIO11_NAND_CS, 1);
err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
if (err) {
pr_warning("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
gpio_direction_input(GPIO56_NAND_RB);
platform_device_register(&em_x270_nand);
}
#else
static inline void em_x270_init_nand(void) {}
#endif
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
......@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.init = em_x270_ohci_init,
};
static void __init em_x270_init_ohci(void)
{
pxa_set_ohci_info(&em_x270_ohci_platform_data);
}
#else
static inline void em_x270_init_ohci(void) {}
#endif
/* MCI controller setup */
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
{
int err;
/* setup GPIO for PXA27x MMC controller */
pxa_gpio_mode(GPIO32_MMCCLK_MD);
pxa_gpio_mode(GPIO112_MMCCMD_MD);
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
/* EM-X270 uses GPIO13 as SD power enable */
pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
__func__, err);
......@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static void em_x270_mci_exit(struct device *dev, void *data)
{
free_irq(EM_X270_MMC_IRQ, data);
int irq = gpio_to_irq(GPIO13_MMC_CD);
free_irq(irq, data);
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
......@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
.exit = em_x270_mci_exit,
};
static void __init em_x270_init_mmc(void)
{
pxa_set_mci_info(&em_x270_mci_platform_data);
}
#else
static inline void em_x270_init_mmc(void) {}
#endif
/* LCD 480x640 */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info em_x270_lcd_mode = {
.pixclock = 50000,
.bpp = 16,
......@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
static struct pxafb_mach_info em_x270_lcd = {
.modes = &em_x270_lcd_mode,
.num_modes = 1,
.cmap_inverse = 0,
.cmap_static = 0,
.lccr0 = LCCR0_PAS,
.lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
static void __init em_x270_init(void)
static void __init em_x270_init_lcd(void)
{
/* setup LCD */
set_pxa_fb_info(&em_x270_lcd);
}
#else
static inline void em_x270_init_lcd(void) {}
#endif
/* register EM-X270 platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init em_x270_init_ac97(void)
{
pxa_set_ac97_info(NULL);
}
#else
static inline void em_x270_init_ac97(void) {}
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int em_x270_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
};
/* set MCI and OHCI platform parameters */
pxa_set_mci_info(&em_x270_mci_platform_data);
pxa_set_ohci_info(&em_x270_ohci_platform_data);
struct pxa27x_keypad_platform_data em_x270_keypad_info = {
/* code map for the matrix keys */
.matrix_key_rows = 3,
.matrix_key_cols = 3,
.matrix_key_map = em_x270_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
};
static void __init em_x270_init_keypad(void)
{
pxa_set_keypad_info(&em_x270_keypad_info);
}
#else
static inline void em_x270_init_keypad(void) {}
#endif
/* setup STUART GPIOs */
pxa_gpio_mode(GPIO46_STRXD_MD);
pxa_gpio_mode(GPIO47_STTXD_MD);
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button gpio_keys_button[] = {
[0] = {
.desc = "sleep/wakeup",
.code = KEY_SUSPEND,
.type = EV_PWR,
.gpio = 1,
.wakeup = 1,
},
};
/* setup BTUART GPIOs */
pxa_gpio_mode(GPIO42_BTRXD_MD);
pxa_gpio_mode(GPIO43_BTTXD_MD);
pxa_gpio_mode(GPIO44_BTCTS_MD);
pxa_gpio_mode(GPIO45_BTRTS_MD);
static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
.buttons = gpio_keys_button,
.nbuttons = 1,
};
/* Setup interrupt for dm9000 */
set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
static struct platform_device em_x270_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &em_x270_gpio_keys_data,
},
};
static void __init em_x270_init_gpio_keys(void)
{
platform_device_register(&em_x270_gpio_keys);
}
#else
static inline void em_x270_init_gpio_keys(void) {}
#endif
static void __init em_x270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
em_x270_init_dm9000();
em_x270_init_rtc();
em_x270_init_nand();
em_x270_init_lcd();
em_x270_init_mmc();
em_x270_init_ohci();
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
}
MACHINE_START(EM_X270, "Compulab EM-x270")
MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
......
arch/arm/mach-pxa/pxa25x.c
View file @ a9da4f7e
......@@ -109,6 +109,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
.getrate = clk_pxa25x_lcd_getrate,
};
static unsigned long gpio12_config_32k[] = {
GPIO12_32KHz,
};
static unsigned long gpio12_config_gpio[] = {
GPIO12_GPIO,
};
static void clk_gpio12_enable(struct clk *clk)
{
pxa2xx_mfp_config(gpio12_config_32k, 1);
}
static void clk_gpio12_disable(struct clk *clk)
{
pxa2xx_mfp_config(gpio12_config_gpio, 1);
}
static const struct clkops clk_pxa25x_gpio12_ops = {
.enable = clk_gpio12_enable,
.disable = clk_gpio12_disable,
};
static unsigned long gpio11_config_3m6[] = {
GPIO11_3_6MHz,
};
static unsigned long gpio11_config_gpio[] = {
GPIO11_GPIO,
};
static void clk_gpio11_enable(struct clk *clk)
{
pxa2xx_mfp_config(gpio11_config_3m6, 1);
}
static void clk_gpio11_disable(struct clk *clk)
{
pxa2xx_mfp_config(gpio11_config_gpio, 1);
}
static const struct clkops clk_pxa25x_gpio11_ops = {
.enable = clk_gpio11_enable,
.disable = clk_gpio11_disable,
};
/*
* 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
* 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
......@@ -128,6 +174,8 @@ static struct clk pxa25x_clks[] = {
INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
......@@ -145,7 +193,10 @@ static struct clk pxa25x_clks[] = {
INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
};
static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
static struct clk pxa2xx_clk_aliases[] = {
INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
};
#ifdef CONFIG_PM
......@@ -293,7 +344,7 @@ static int __init pxa25x_init(void)
int i, ret = 0;
/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
if (cpu_is_pxa25x())
if (cpu_is_pxa255())
clks_register(&pxa25x_hwuart_clk, 1);
if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
......@@ -317,10 +368,10 @@ static int __init pxa25x_init(void)
}
/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
if (cpu_is_pxa25x())
if (cpu_is_pxa255())
ret = platform_device_register(&pxa_device_hwuart);
clks_register(&gpio7_clk, 1);
clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
return ret;
}
......
arch/arm/mach-sa1100/clock.c
View file @ a9da4f7e
......@@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
}
static struct clk clk_gpio27 = {
.name = "GPIO27_CLK",
.name = "SA1111_CLK",
.rate = 3686400,
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
......
drivers/mtd/nand/cmx270_nand.c
View file @ a9da4f7e
......@@ -20,9 +20,11 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/gpio.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
......@@ -30,20 +32,6 @@
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
/* This macro needed to ensure in-order operation of GPIO and local
* bus. Without both asm command and dummy uncached read there're
* states when NAND access is broken. I've looked for such macro(s) in
* include/asm-arm but found nothing approptiate.
* dmac_clean_range is close, but is makes cache invalidation
* unnecessary here and it cannot be used in module
*/
#define DRAIN_WB() \
do { \
unsigned char dummy; \
asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0"); \
dummy=*((unsigned char*)UNCACHED_ADDR); \
} while(0)
/* MTD structure for CM-X270 board */
static struct mtd_info *cmx270_nand_mtd;
......@@ -103,14 +91,14 @@ static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
static inline void nand_cs_on(void)
{
GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO_NAND_CS, 0);
}
static void nand_cs_off(void)
{
DRAIN_WB();
dsb();
GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO_NAND_CS, 1);
}
/*
......@@ -122,7 +110,7 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
struct nand_chip* this = mtd->priv;
unsigned int nandaddr = (unsigned int)this->IO_ADDR_W;
DRAIN_WB();
dsb();
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_ALE )
......@@ -139,12 +127,12 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
nand_cs_off();
}
DRAIN_WB();
dsb();
this->IO_ADDR_W = (void __iomem*)nandaddr;
if (dat != NAND_CMD_NONE)
writel((dat << 16), this->IO_ADDR_W);
DRAIN_WB();
dsb();
}
/*
......@@ -152,9 +140,9 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
*/
static int cmx270_device_ready(struct mtd_info *mtd)
{
DRAIN_WB();
dsb();
return (GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB));
return (gpio_get_value(GPIO_NAND_RB));
}
/*
......@@ -168,20 +156,40 @@ static int cmx270_init(void)
int mtd_parts_nb = 0;
int ret;
if (!machine_is_armcore())
return -ENODEV;
ret = gpio_request(GPIO_NAND_CS, "NAND CS");
if (ret) {
pr_warning("CM-X270: failed to request NAND CS gpio\n");
return ret;
}
gpio_direction_output(GPIO_NAND_CS, 1);
ret = gpio_request(GPIO_NAND_RB, "NAND R/B");
if (ret) {
pr_warning("CM-X270: failed to request NAND R/B gpio\n");
goto err_gpio_request;
}
gpio_direction_input(GPIO_NAND_RB);
/* Allocate memory for MTD device structure and private data */
cmx270_nand_mtd = kzalloc(sizeof(struct mtd_info) +
sizeof(struct nand_chip),
GFP_KERNEL);
if (!cmx270_nand_mtd) {
printk("Unable to allocate CM-X270 NAND MTD device structure.\n");
return -ENOMEM;
pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n");
ret = -ENOMEM;
goto err_kzalloc;
}
cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
if (!cmx270_nand_io) {
printk("Unable to ioremap NAND device\n");
pr_debug("Unable to ioremap NAND device\n");
ret = -EINVAL;
goto err1;
goto err_ioremap;
}
/* Get pointer to private data */
......@@ -209,9 +217,9 @@ static int cmx270_init(void)
/* Scan to find existence of the device */
if (nand_scan (cmx270_nand_mtd, 1)) {
printk(KERN_NOTICE "No NAND device\n");
pr_notice("No NAND device\n");
ret = -ENXIO;
goto err2;
goto err_scan;
}
#ifdef CONFIG_MTD_CMDLINE_PARTS
......@@ -229,18 +237,22 @@ static int cmx270_init(void)
}
/* Register the partitions */
printk(KERN_NOTICE "Using %s partition definition\n", part_type);
pr_notice("Using %s partition definition\n", part_type);
ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
if (ret)
goto err2;
goto err_scan;
/* Return happy */
return 0;
err2:
err_scan:
iounmap(cmx270_nand_io);
err1:
err_ioremap:
kfree(cmx270_nand_mtd);
err_kzalloc:
gpio_free(GPIO_NAND_RB);
err_gpio_request:
gpio_free(GPIO_NAND_CS);
return ret;
......@@ -255,6 +267,9 @@ static void cmx270_cleanup(void)
/* Release resources, unregister device */
nand_release(cmx270_nand_mtd);
gpio_free(GPIO_NAND_RB);
gpio_free(GPIO_NAND_CS);
iounmap(cmx270_nand_io);
/* Free the MTD device structure */
......
drivers/pcmcia/pxa2xx_cm_x270.c
View file @ a9da4f7e
......@@ -5,83 +5,60 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Compulab Ltd., 2003, 2007
* Compulab Ltd., 2003, 2007, 2008
* Mike Rapoport <mike@compulab.co.il>
*
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <pcmcia/ss.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/cm-x270.h>
#include "soc_common.h"
#define GPIO_PCMCIA_S0_CD_VALID (84)
#define GPIO_PCMCIA_S0_RDYINT (82)
#define GPIO_PCMCIA_RESET (53)
#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
static struct pcmcia_irqs irqs[] = {
{ 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
{ 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
};
static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) |
GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) |
GPIO_bit(GPIO85_nPCE_1) |
GPIO_bit(GPIO54_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO85_nPCE_1_MD);
pxa_gpio_mode(GPIO54_nPCE_2_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
/* Reset signal */
pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
/* irq's for slots: */
set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
if (ret)
return ret;
gpio_direction_output(GPIO_PCMCIA_RESET, 0);
skt->irq = PCMCIA_S0_RDYINT;
ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
if (!ret)
gpio_free(GPIO_PCMCIA_RESET);
return ret;
}
static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
gpio_free(GPIO_PCMCIA_RESET);
}
static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1;
state->detect = (gpio_get_value(GPIO_PCMCIA_S0_CD_VALID) == 0) ? 1 : 0;
state->ready = (gpio_get_value(GPIO_PCMCIA_S0_RDYINT) == 0) ? 0 : 1;
state->bvd1 = 1;
state->bvd2 = 1;
state->vs_3v = 0;
......@@ -93,32 +70,16 @@ static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
switch (skt->nr) {
case 0:
if (state->flags & SS_RESET) {
GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
udelay(10);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
}
break;
case 1:
if (state->flags & SS_RESET) {
GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
gpio_set_value(GPIO_PCMCIA_RESET, 1);
udelay(10);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
gpio_set_value(GPIO_PCMCIA_RESET, 0);
}
break;
}
pxa_gpio_mode(GPIO49_nPWE_MD);
return 0;
}
......@@ -139,7 +100,7 @@ static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
.configure_socket = cmx270_pcmcia_configure_socket,
.socket_init = cmx270_pcmcia_socket_init,
.socket_suspend = cmx270_pcmcia_socket_suspend,
.nr = 2,
.nr = 1,
};
static struct platform_device *cmx270_pcmcia_device;
......
include/asm-arm/arch-pxa/cm-x270.h deleted 100644 → 0
View file @ 67f5cd0f
/*
* linux/include/asm/arch-pxa/cm-x270.h
*
* Copyright Compulab Ltd., 2003, 2007
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* CM-x270 device physical addresses */
#define CMX270_CS1_PHYS (PXA_CS1_PHYS)
#define MARATHON_PHYS (PXA_CS2_PHYS)
#define CMX270_IDE104_PHYS (PXA_CS3_PHYS)
#define CMX270_IT8152_PHYS (PXA_CS4_PHYS)
/* Statically mapped regions */
#define CMX270_VIRT_BASE (0xe8000000)
#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
#define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + SZ_64M)
/* GPIO related definitions */
#define GPIO_IT8152_IRQ (22)
#define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ)
#define PME_IRQ IRQ_GPIO(0)
#define CMX270_IDE_IRQ IRQ_GPIO(100)
#define CMX270_GPIRQ1 IRQ_GPIO(101)
#define CMX270_TOUCHIRQ IRQ_GPIO(96)
#define CMX270_ETHIRQ IRQ_GPIO(10)
#define CMX270_GFXIRQ IRQ_GPIO(95)
#define CMX270_NANDIRQ IRQ_GPIO(89)
#define CMX270_MMC_IRQ IRQ_GPIO(83)
/* PCMCIA related definitions */
#define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x)))
#define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(82 - (x)))
#define PCMCIA_S0_CD_VALID IRQ_GPIO(84)
#define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES
#define PCMCIA_S1_CD_VALID IRQ_GPIO(83)
#define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES
#define PCMCIA_S0_RDYINT IRQ_GPIO(82)
#define PCMCIA_S1_RDYINT IRQ_GPIO(81)
#define PCMCIA_RESET_GPIO 53
include/asm-arm/arch-pxa/hardware.h
View file @ a9da4f7e
......@@ -69,6 +69,12 @@
_id == 0x212; \
})
#define __cpu_is_pxa255(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x2d0; \
})
#define __cpu_is_pxa25x(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
......@@ -76,6 +82,7 @@
})
#else
#define __cpu_is_pxa21x(id) (0)
#define __cpu_is_pxa255(id) (0)
#define __cpu_is_pxa25x(id) (0)
#endif
......@@ -124,6 +131,11 @@
__cpu_is_pxa21x(read_cpuid_id()); \
})
#define cpu_is_pxa255() \
({ \
__cpu_is_pxa255(read_cpuid_id()); \
})
#define cpu_is_pxa25x() \
({ \
__cpu_is_pxa25x(read_cpuid_id()); \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7